| Year |
Citation |
Score |
| 2020 |
Beaman JJ, Bourell DL, Seepersad CC, Kovar D. Additive Manufacturing Review: Early Past to Current Practice Journal of Manufacturing Science and Engineering. 142. DOI: 10.1115/1.4048193 |
0.33 |
|
| 2020 |
Koga S, Krstic M, Beaman J. Laser Sintering Control for Metal Additive Manufacturing by PDE Backstepping Ieee Transactions On Control Systems and Technology. 28: 1928-1939. DOI: 10.1109/Tcst.2020.2996580 |
0.349 |
|
| 2020 |
Phillips T, Ricker T, Fish S, Beaman J. Design of a laser control system with continuously variable power and its application in additive manufacturing Additive Manufacturing. 34: 101173. DOI: 10.1016/J.Addma.2020.101173 |
0.358 |
|
| 2019 |
Hagen D, Beaman JJ, Kovar D. Selective laser flash sintering of 8‐YSZ Journal of the American Ceramic Society. 103: 800-808. DOI: 10.1111/Jace.16771 |
0.519 |
|
| 2018 |
Gardner MR, Lewis A, Park J, McElroy AB, Estrada AD, Fish S, Beaman JJ, Milner TE. In situ process monitoring in selective laser sintering using optical coherence tomography. Optical Engineering (Redondo Beach, Calif.). 57. PMID 29576665 DOI: 10.1117/1.Oe.57.4.041407 |
0.322 |
|
| 2018 |
Ojinnaka MA, Beaman JJ. Full-course drilling model for well monitoring and stochastic estimation of kick Journal of Petroleum Science and Engineering. 166: 33-43. DOI: 10.1016/J.Petrol.2018.03.012 |
0.321 |
|
| 2018 |
Phillips T, Fish S, Beaman J. Development of an automated laser control system for improving temperature uniformity and controlling component strength in selective laser sintering Additive Manufacturing. 24: 316-322. DOI: 10.1016/J.Addma.2018.10.016 |
0.331 |
|
| 2016 |
Wroe WW, Gladstone J, Phillips T, Fish S, Beaman J, McElroy A. In-situ thermal image correlation with mechanical properties of nylon-12 in SLS Rapid Prototyping Journal. 22: 794-800. DOI: 10.1108/Rpj-10-2015-0158 |
0.312 |
|
| 2015 |
Diller TT, Yuan M, Bourell DL, Beaman JJ. Thermal model and measurements of polymer laser sintering Rapid Prototyping Journal. 21: 2-13. DOI: 10.1108/Rpj-10-2012-0090 |
0.347 |
|
| 2015 |
Fish S, Booth JC, Kubiak ST, Wroe WW, Bryant AD, Moser DR, Beaman JJ. Design and subsystem development of a high temperature selective laser sintering machine for enhanced process monitoring and control Additive Manufacturing. 5: 60-67. DOI: 10.1016/J.Addma.2014.12.005 |
0.347 |
|
| 2014 |
Beaman JJ, Lopez LF, Williamson RL. Modeling of the vacuum arc remelting process for estimation and control of the liquid pool profile Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 136. DOI: 10.1115/1.4026319 |
0.331 |
|
| 2013 |
Yuan M, Diller TT, Bourell D, Beaman J. Thermal conductivity of polyamide 12 powder for use in laser sintering Rapid Prototyping Journal. 19: 437-445. DOI: 10.1108/Rpj-11-2011-0123 |
0.315 |
|
| 2012 |
Williamson RL, Beaman JJ. Modern control theory applied to remelting of superalloys Materials Science Forum. 706: 2484-2489. DOI: 10.4028/Www.Scientific.Net/Msf.706-709.2484 |
0.333 |
|
| 2010 |
Ahn S, Beaman JJ, Williamson RL, Melgaard DK. Model-based control of electroslag remelting process using unscented Kalman filter Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 132: 1-9. DOI: 10.1115/1.4000660 |
0.507 |
|
| 2008 |
Stevinson B, Bourell DL, Beaman JJ. Over-infiltration mechanisms in selective laser sintered Si/SiC preforms Rapid Prototyping Journal. 14: 149-154. DOI: 10.1108/13552540810878003 |
0.302 |
|
| 2007 |
Stevinson BY, Bourell DL, Beaman JJ. Freeform fabrication of non-metallic objects by selective laser sintering and infiltration Materials Science Forum. 561: 817-820. DOI: 10.4028/Www.Scientific.Net/Msf.561-565.817 |
0.338 |
|
| 2006 |
Stevinson B, Bourell DL, Beaman JJ. Dimensional stability during post-processing of selective laser sintered ceramic preforms Virtual and Physical Prototyping. 1: 209-216. DOI: 10.1080/17452750601107003 |
0.335 |
|
| 2005 |
Williamson RL, Beaman JJ, Zanner FJ, Debarbadillo JJ. Advancing alloy 718 vacuum arc remelting technology through developing model-based controls Proceedings of the International Symposium On Superalloys and Various Derivatives. 47-56. DOI: 10.7449/2005/Superalloys_2005_47_56 |
0.326 |
|
| 2005 |
Evans RS, Bourell DL, Beaman JJ, Campbell MI. Rapid manufacturing of silicon carbide composites Rapid Prototyping Journal. 11: 37-40. DOI: 10.1108/13552540510573374 |
0.329 |
|
| 2005 |
King CW, Campbell MI, Beaman JJ, Sreenivasan SV. Synthesis of multistable equilibrium linkage systems using an optimization approach Structural and Multidisciplinary Optimization. 29: 477-487. DOI: 10.1007/S00158-004-0489-6 |
0.581 |
|
| 2004 |
King C, Beaman JJ, Sreenivasan SV, Campbell M. Multistable equilibrium system design methodology and demonstration Journal of Mechanical Design, Transactions of the Asme. 126: 1036-1046. DOI: 10.1115/1.1799631 |
0.57 |
|
| 2004 |
Mignatti MA, Campbell MI, Ruizpalacios R, Wood KL, Beaman JJ. Modeling and characterization of novel, low-cost, direct-write waveguide Rapid Prototyping Journal. 10: 50-57. DOI: 10.1108/13552540410512534 |
0.513 |
|
| 2004 |
Williamson RL, Beaman JJ, Melgaard DK, Shelmidine GJ, Morrison R. Model-Based Melt Rate Control during Vacuum Arc Remelting of Alloy 718 Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 35: 101-113. DOI: 10.1007/S11663-004-0100-Y |
0.303 |
|
| 2004 |
King CW, Campbell MI, Beaman JJ. On the design synthesis of multistable equilibrium systems Proceedings of the Asme Design Engineering Technical Conference. 1: 109-122. |
0.521 |
|
| 2003 |
Dutson AJ, Wood KL, Beaman JJ, Crawford RH, Bourell DL. Application of similitude techniques to functional testing of rapid prototypes Rapid Prototyping Journal. 9: 6-13. DOI: 10.1108/13552540310455593 |
0.638 |
|
| 2002 |
Bourell D, Wohlert M, Harlan N, Das S, Beaman J. Powder Densification Maps in Selective Laser Sintering Advanced Engineering Materials. 4: 663-669. DOI: 10.1002/1527-2648(20020916)4:9<663::Aid-Adem663>3.0.Co;2-1 |
0.342 |
|
| 2001 |
Harlan NR, Reyes R, Bourell DL, Beaman JJ. Titanium castings using laser-scanned data and selective laser-sintered zirconia molds Journal of Materials Engineering and Performance. 10: 410-413. DOI: 10.1361/105994901770344818 |
0.323 |
|
| 2000 |
Harlan NR, Bourell D, Park S, Beaman JJ. Selective Laser Sintering of Zirconia Mrs Proceedings. 625. DOI: 10.1557/Proc-625-67 |
0.528 |
|
| 2000 |
Das S, Fuesting TP, Danyo G, Brown LE, Beaman JJ, Bourell DL. Direct laser fabrication of superalloy cermet abrasive turbine blade tips Materials and Design. 21: 63-73. DOI: 10.1016/S0261-3069(99)00057-6 |
0.349 |
|
| 1999 |
Das S, Beaman JJ, Wohlert M, Bourell DL. Freeform fabrication of high performance titanium components via SLS/HIP Materials Research Society Symposium - Proceedings. 542: 45-50. DOI: 10.1557/Proc-542-45 |
0.346 |
|
| 1999 |
Crawford R, Beaman J. Solid freeform fabrication Ieee Spectrum. 36: 34-43. DOI: 10.1109/6.744874 |
0.318 |
|
| 1999 |
Das S, Wohlert M, Beaman JJ, Bourell DL. Processing of titanium net shapes by SLS/HIP Materials and Design. 20: 115-121. DOI: 10.1016/S0261-3069(99)00017-5 |
0.303 |
|
| 1998 |
Das S, Harlan N, Lee G, Beaman JJ, Bourell DL, Barlow JW, Fuesting T, Brown L, Sargent K. Direct SLS processing for production of cermet composite turbine sealing components Materials and Manufacturing Processes. 13: 241-261. DOI: 10.1080/10426919808935239 |
0.358 |
|
| 1998 |
Das S, Wohlert M, Beaman JJ, Bourell DL. Producing metal parts with selective laser sintering/hot isostatic pressing Jom. 50. DOI: 10.1007/S11837-999-0067-X |
0.341 |
|
| 1998 |
Melgaard DK, Williamson RL, Beaman JJ. Controlling remelting processes for superalloys and aerospace Ti alloys Jom. 50: 13-17. DOI: 10.1007/S11837-998-0372-9 |
0.32 |
|
| 1996 |
Barlow JW, Beaman JJ, Balasubramanian B. A rapid mould-making system: Material properties and design considerations Rapid Prototyping Journal. 2: 4-15. DOI: 10.1108/13552549610148169 |
0.342 |
|
| 1995 |
Agarwala M, Bourell D, Beaman J, Marcus H, Barlow J. Post‐processing of selective laser sintered metal parts Rapid Prototyping Journal. 1: 36-44. DOI: 10.1108/13552549510086853 |
0.336 |
|
| 1995 |
Nelson JC, Vail NK, Barlow JW, Beaman JJ, Bourell DL, Marcus HL. Selective laser sintering of polymer-coated silicon carbide powders Industrial and Engineering Chemistry Research. 34: 1641-1651. DOI: 10.1021/Ie00044A017 |
0.328 |
|
| 1993 |
Longoria RG, Miksad RW, Beaman JJ. Frequency domain analysis of in-line forces on circular cylinders in random oscillatory flow Journal of Offshore Mechanics and Arctic Engineering. 115: 23-30. DOI: 10.1115/1.2920084 |
0.625 |
|
| 1993 |
Nelson JC, Xue S, Barlow JW, Beaman JJ, Marcus HL, Bourell DL. Model of the selective laser sintering of bisphenol-A polycarbonate Industrial & Engineering Chemistry Research. 32: 2305-2317. DOI: 10.1021/Ie00022A014 |
0.327 |
|
| 1992 |
Chaney MJ, Beaman JJ. Comparison of nonlinear tracking controllers for a compressible flow process Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 114: 493-499. DOI: 10.1115/1.2897374 |
0.301 |
|
| 1991 |
Longoria RG, Beaman JJ, Miksad RW. An Experimental Investigation of Forces Induced on Cylinders by Random Oscillatory Flow Journal of Offshore Mechanics and Arctic Engineering. 113: 275-285. DOI: 10.1115/1.2919931 |
0.618 |
|
| 1990 |
da Silva RE, Wood KL, Beaman JJ. Representing and manipulating interacting and interfeature relationships in engineering design for manufacture American Society of Mechanical Engineers, Design Engineering Division (Publication) De. 23: 1-8. |
0.432 |
|
| 1990 |
Longoria RG, Beaman JJ, Miksad RW. Nonlinear hydrodynamic forces in random oscillatory flow . 77-83. |
0.592 |
|
| Low-probability matches (unlikely to be authored by this person) |
| 2003 |
Bourell DL, Beaman JJ. Chronology and Current Processes for Freeform Fabrication Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy. 50: 981-991. DOI: 10.2497/Jjspm.50.981 |
0.297 |
|
| 2019 |
Zhang L, Phillips T, Mok A, Moser D, Beaman J. Automatic Laser Control System for Selective Laser Sintering Ieee Transactions On Industrial Informatics. 15: 2177-2185. DOI: 10.1109/Tii.2018.2867007 |
0.294 |
|
| 2020 |
Taylor S, Wright JB, Forrest EC, Jared B, Koepke J, Beaman J. Investigating relationship between surface topography and emissivity of metallic additively manufactured parts International Communications in Heat and Mass Transfer. 115: 104614. DOI: 10.1016/J.Icheatmasstransfer.2020.104614 |
0.293 |
|
| 2004 |
Beaman JJ, Williamson RL, Melgaard DK, Shelmidine GJ, Hamel JC. Model based gap and melt rate control for VAR of Ti-6Al-4V Journal of Materials Science. 39: 7153-7159. DOI: 10.1023/B:Jmsc.0000048726.57741.De |
0.293 |
|
| 1987 |
Beaman JJ, Lin CH. APPLICATION OF NONLINEAR QUADRATIC STOCHASTIC CONTROL TO A POSITION SERVOMECHANISM American Society of Mechanical Engineers (Paper). DOI: 10.1115/1.2896194 |
0.292 |
|
| 1997 |
Bourell DL, Beaman J, Barlow JW, Crawford RH, Marcus HL, Weiss LE. Current and future trends in solid free-form fabrication Proceedings of Spie - the International Society For Optical Engineering. 2910: 104-113. DOI: 10.1117/12.263339 |
0.287 |
|
| 1981 |
Beaman JJ, Hedrick JK. Improved Statistical Linearization for Analysis and Control of Nonlinear Stochastic Systems: Part I: An Extended Statistical Linearization Technique Journal of Dynamic Systems Measurement and Control-Transactions of the Asme. 103: 14-21. DOI: 10.1115/1.3139636 |
0.278 |
|
| 1981 |
Beaman JJ, Hedrick JK. Improved Statistical Linearization for Analysis and Control of Nonlinear Stochastic Systems: Part II: Application to Control System Design Journal of Dynamic Systems Measurement and Control-Transactions of the Asme. 103: 22-27. DOI: 10.1115/1.3139638 |
0.277 |
|
| 1991 |
Paynter HM, Beaman JJ. On the fall and rise of the circuit concept Journal of the Franklin Institute. 328: 525-534. DOI: 10.1016/0016-0032(91)90041-Z |
0.277 |
|
| 2003 |
Wang HY, Bourell DL, Beaman JJ. Laser polishing of silica slotted rods Materials Science and Technology. 19: 382-387. DOI: 10.1179/026708303225009760 |
0.277 |
|
| 2018 |
Lewis AD, Katta N, McElroy AB, Milner TE, Fish S, Beaman JJ. Understanding and improving optical coherence tomography imaging depth in selective laser sintering nylon 12 parts and powder Optical Engineering. 57: 41414. DOI: 10.1117/1.Oe.57.4.041414 |
0.276 |
|
| 1994 |
Schreuders PD, Diller KR, Beaman JJ, Paynter HM. An analysis of coupled multicomponent diffusion in interstitial tissue Journal of Biomechanical Engineering. 116: 164-171. PMID 7521448 DOI: 10.1115/1.2895715 |
0.273 |
|
| 1997 |
Williamson RL, Schlienger ME, Hysinger CL, Beaman JJ. Modern control strategies for vacuum arc remelting of segregation sensitive alloys Superalloys. 37-46. DOI: 10.7449/1997/Superalloys_1997_37_46 |
0.272 |
|
| 2011 |
Silverman TJ, Meyers JP, Beaman JJ. Dynamic thermal, transport and mechanical model of fuel cell membrane swelling Fuel Cells. 11: 875-887. DOI: 10.1002/Fuce.201100025 |
0.27 |
|
| 2015 |
Devaraj V, Lopez LF, Beaman JJ, Prudhomme S. Model-based control of a continuous coating line for proton exchange membrane fuel cell electrode assembly International Journal of Chemical Engineering. 2015. DOI: 10.1155/2015/572983 |
0.269 |
|
| 2004 |
Williamson RL, Beaman JJ, Melgaard DK, Shelmidine GJ, Patel AD, Adasczik CB. A demonstration of melt rate control during VAR of "cracked" electrodes Journal of Materials Science. 39: 7161-7168. DOI: 10.1023/B:Jmsc.0000048727.61313.5E |
0.267 |
|
| 2003 |
Ramos JA, Bourell DL, Beaman JJ. Surface over-melt during laser polishing of indirect-SLS metal parts Materials Research Society Symposium - Proceedings. 758: 53-61. DOI: 10.1557/Proc-758-Ll1.9 |
0.267 |
|
| 1988 |
Diller KR, Beaman JJ, Montoya JP, Breedfeld PC. Network thermodynamic modeling with bond graphs for membrane transport during cell freezing procedures Journal of Heat Transfer. 110: 938-945. DOI: 10.1115/1.3250596 |
0.265 |
|
| 2014 |
Beaman JJ, Lopez F. Emerging Nexis of Cyber, Modeling, and Estimation in Advanced Manufacturing Mechanical Engineering. 136. DOI: 10.1115/1.2014-Dec-6 |
0.261 |
|
| 1988 |
Beaman JJ, Breedveld PC. PHYSICAL MODELING WITH EULERIAN FRAMES AND BOND GRAPHS Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 110: 182-188. DOI: 10.1115/1.3152669 |
0.256 |
|
| 1984 |
Beaman JJ. Non-linear quadratic gaussian controlf International Journal of Control. 39: 343-361. DOI: 10.1080/00207178408933170 |
0.254 |
|
| 1985 |
Beaman JJ. DYNAMIC MODEL OF A PRESSURE SWING OXYGEN GENERATION SYSTEM Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 107: 111-116. DOI: 10.1115/1.3149681 |
0.252 |
|
| 1997 |
Rensberger R, de Zande Rv, Delaney H, Zaretsky E, Rakowski W, Kingsley J, Schilling C, Adair J, Beaman J, Barlow J, Bourell D, Crawford R, Marcus H, McAlea K, Clark D, et al. Three Materials Reports Materials Technology. 12: 74-78. DOI: 10.1080/10667857.1997.11752732 |
0.252 |
|
| 1983 |
Pottebaum KL, Beaman JJ. DYNAMIC MODEL OF A CONCENTRIC LADD ACTUATOR Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 105: 157-164. DOI: 10.1115/1.3140650 |
0.249 |
|
| 2010 |
Silverman TJ, Meyers JP, Beaman JJ. Modeling water transport and swelling in polymer electrolyte membranes Journal of the Electrochemical Society. 157. DOI: 10.1149/1.3464805 |
0.247 |
|
| 1990 |
Marcus HL, Barlow JW, Beaman JJ, Bourell DL. From computer to component in 15 minutes: The integrated manufacture of three-dimensional objects Jom. 42: 8-10. DOI: 10.1007/Bf03220915 |
0.245 |
|
| 1982 |
McClamrock NH, Beaman JJ. Erratum: “State Models of Dynamic Systems: A Case Study Approach” (Journal of Dynamic Systems, Measurement, and Control, 1981, 103, p. 297) Journal of Dynamic Systems Measurement and Control-Transactions of the Asme. 104: 48-48. DOI: 10.1115/1.3149631 |
0.242 |
|
| 1994 |
Vail NK, Barlow JW, Beaman JJ, Marcus HL, Bourell DL. Development of a poly(methyl methacrylate-co-n-butyl methacrylate) copolymer binder system Journal of Applied Polymer Science. 52: 789-812. DOI: 10.1002/App.1994.070520610 |
0.242 |
|
| 1983 |
Beaman JJ, Healey AJ, Werlin J. DYNAMIC MODEL OF A MOLECULAR SIEVE BED WITH NONLINEAR AND COUPLED ISOTHERMS Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 105: 265-271. DOI: 10.1115/1.3140669 |
0.24 |
|
| 1988 |
Beaman JJ, Rosenberg RC. Constitutive and modulation structure in bond graph modeling Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 110: 395-402. DOI: 10.1115/1.3152702 |
0.233 |
|
| 2009 |
Bourell DL, Vallabhajosyula P, Stevinson B, Chen S, Beaman JJ. Rapid manufacturing using infiltration selective laser sintering 2008 Proceedings of the 9th Biennial Conference On Engineering Systems Design and Analysis. 1: 173-178. |
0.233 |
|
| 2014 |
Beaman J, Bourell D, Wallace D. Special Issue: Additive Manufacturing (AM) and 3D Printing Journal of Manufacturing Science and Engineering, Transactions of the Asme. 136. DOI: 10.1115/1.4028670 |
0.229 |
|
| 2001 |
Park SM, Crawford RH, Beaman JJ. Volumetric multi-texturing for functionally gradient material representation Proceedings of the Symposium On Solid Modeling and Applications. 216-224. |
0.225 |
|
| 1994 |
Bourell DL, Crawford RH, Marcus HL, Beaman JJ, Barlow JW. Selective Laser Sintering of metals American Society of Mechanical Engineers, Production Engineering Division (Publication) Ped. 68: 519-528. |
0.223 |
|
| 2015 |
Lopez F, Zhang L, Mok A, Beaman J. Particle filtering on GPU architectures for manufacturing applications Computers in Industry. 71: 116-127. DOI: 10.1016/J.Compind.2015.03.013 |
0.218 |
|
| 1986 |
Montoya J, Diller K, Beaman J. A network thermodynamic model for simulation and permeability analysis of coupled membrane transport Cryobiology. 23: 546-547. DOI: 10.1016/0011-2240(86)90074-X |
0.216 |
|
| 2006 |
Stevinson BY, Bourell DL, Beaman JJ. Support-free infiltration of selective laser sintered (SLS) silicon carbide preforms 17th Solid Freeform Fabrication Symposium, Sff 2006. 359-365. |
0.213 |
|
| 1988 |
Deckard C, Beaman JJ. Process and control issues in selective laser sintering American Society of Mechanical Engineers, Production Engineering Division (Publication) Ped. 33: 191-197. |
0.209 |
|
| 2006 |
Melgaard DK, Beaman JJ, Shelmidine G. Model-based electroslag remelting control for simultaneous, consistent and responsive melt rate and immersion depth control 2006 Tms Fall Extraction and Processing Division: Sohn International Symposium. 7: 435-449. |
0.202 |
|
| 1987 |
Diller KR, Beaman JJ, Montoya J. A network thermodynamic method of analysis and simulation of membrane transport during cryopreservation Cryobiology. 24: 543. DOI: 10.1016/0011-2240(87)90062-9 |
0.201 |
|
| 2005 |
Bourell DL, Beaman JJ. Rapid manufacturing materials fundamentals Advanced Materials and Processes. 163: 49. |
0.199 |
|
| 2011 |
Lopez LF, Beaman JJ, Williamson RL. A reduced-order model for dynamic vacuum arc remelting pool depth estimation and control Asme 2011 Dynamic Systems and Control Conference and Bath/Asme Symposium On Fluid Power and Motion Control, Dscc 2011. 1: 517-524. DOI: 10.1115/DSCC2011-5958 |
0.199 |
|
| 2005 |
Beaman JJ, Williamson RL, Melgaard DK, Hamel J. A nonlinear reduced order model for estimation and control of vacuum ARC remelting of metal alloys American Society of Mechanical Engineers, Dynamic Systems and Control Division (Publication) Dsc. 74: 1059-1067. DOI: 10.1115/IMECE2005-79239 |
0.198 |
|
| 2012 |
Bourell DL, Beaman JJ. Powder material principles applied to additive manufacturing Tms Annual Meeting. 1: 537-544. |
0.197 |
|
| 2014 |
Lopez LF, Beaman JJ. Reduction of a finite volume model for control of the solidification front in a remelting process Asme 2014 Dynamic Systems and Control Conference, Dscc 2014. 2. DOI: 10.1115/DSCC2014-6178 |
0.185 |
|
| 2005 |
Bourell DL, Beaman JJ. Materials issues in rapid prototyping Virtual Modelling and Rapid Manufacturing - Advanced Research in Virtual and Rapid Prototyping. 305-310. |
0.181 |
|
| 2012 |
Diller TT, Yuan MM, Bourell DL, Beaman JJ. Thermal characterization of laser sintering of nylon-12 Innovative Developments in Virtual and Physical Prototyping - Proceedings of the 5th International Conference On Advanced Research and Rapid Prototyping. 369-373. |
0.18 |
|
| 2012 |
Lopez LF, Beaman JJ, Williamson RL. Linear-quadratic-gaussian (LQG) controller for liquid pool profile in vacuum ARC remelting Asme 2012 5th Annual Dynamic Systems and Control Conference Joint With the Jsme 2012 11th Motion and Vibration Conference, Dscc 2012-Movic 2012. 2: 677-686. DOI: 10.1115/DSCC2012-MOVIC2012-8546 |
0.18 |
|
| 2009 |
Beaman JJ, Ahn S. Estimation of electroslag remelting process with an Unscented Kalman filter Tms Annual Meeting. 225-233. |
0.176 |
|
| 2004 |
Williamson RL, Melgaard DK, Beaman JJ. Model-based control of the vacuum arc remelting process Industrial Heating. 71: 59-65. |
0.174 |
|
| 1981 |
Beaman JJ, Hedrick JK. IMPROVED STATISTICAL LINEARIZATION FOR ANALYSIS AND CONTROL OF NONLINEAR STOCHASTIC SYSTEMS - 1,2 Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 103: 14-27. |
0.173 |
|
| 2003 |
Williamson RL, Beaman JJ, Melgaard DK. Accurate, Responsive Melt Rate Control During Vacuum Arc Remelting Materials Science and Technology 2003 Meeting. 209-224. |
0.169 |
|
| 2002 |
Bourell DL, Beaman JJ. Freeform fabrication - History and current processes Proceedings of the Tms Fall Meeting. 3-17. |
0.162 |
|
| 2005 |
Evans RS, Bourell DL, Beaman JJ, Campbell MI. SLS materials development method for rapid manufacturing 16th Solid Freeform Fabrication Symposium, Sff 2005. 184-196. |
0.156 |
|
| 2011 |
Leigh DK, Bourell DL, Beaman JJ. Effect of in-plane voiding on the fracture behavior of laser sintered polyamide 22nd Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, Sff 2011. 453-463. DOI: 10.1115/ISFA2012-7102 |
0.151 |
|
| 1998 |
Das S, Beaman JJ, Bourell MWDL. Direct laser freeform fabrication of high performance metal components Rapid Prototyping Journal. 4: 112-117. |
0.146 |
|
| 2012 |
Bourell DL, Beaman JJ. The history OF laser aditive manufacturing Lia Today. 20: 6-7. |
0.146 |
|
| 2001 |
Williamson RL, Beaman JJ, Melgaard DK. Optimal filtering applied to the vacuum arc remelting process Tms Annual Meeting. 615-628. |
0.138 |
|
| 1976 |
Platin BE, Beaman JJ, Hedrick JK, Wormley DN. COMPUTATIONAL METHODS TO PREDICT RAILCAR RESPONSE TO TRACK CROSS-LEVEL VARIATIONS Us Fed Railroad Adm Rep Fra-or&Amp;D-76-293. |
0.134 |
|
| 1987 |
Schreuders PD, Diller KR, Beaman JJ, Paynter HM, Clark DB. KINETIC ANALYSIS OF COUPLED INTERSTITIAL MULTICOMPONENT DIFFUSION Asme Bioeng Div Publ Bed. 5: 51-56. |
0.131 |
|
| 1991 |
Longori RG, Miksad RW, Beaman JJ. Frequency domain analysis of inline forces on circular cylinders in random oscillatory flow . |
0.125 |
|
| 1987 |
Montoya JP, Diller KR, Beaman JJ, Breedfield PC. NETWORK THERMODYNAMIC MODEL FOR COUPLED MEMBRANE TRANSPORT: APPLICATION TO CELL CRYOPRESERVATION . 3: 537-542. |
0.124 |
|
| 1988 |
Ingrim ME, Masada GY, Beaman JJ. Bond graph representation of thermomechanical processes in one-dimensional thermoelastic continua American Society of Mechanical Engineers, Dynamic Systems and Control Division (Publication) Dsc. 8: 1-8. |
0.123 |
|
| 2005 |
Aikin RM, Tubesing PK, Williamson RL, Melgaard DK, Beaman JJ. The interaction of melt control strategy and electrode discontinuities in vacuum arc remelting Lmpc 2005 - Proceedings of the 2005 International Symposium On Liquid Metal Processing and Casting. 2005: 71-82. |
0.111 |
|
| 1997 |
Crawford RH, Barlow JW, Beaman JJ, Bourell DL. Replacement of biological parts using solid freeform fabrication technologies American Society of Mechanical Engineers, Bioengineering Division (Publication) Bed. 36: 267-268. |
0.099 |
|
| 2005 |
Melgaard DK, Shelmidine G, Beaman JJ. Multiple-input multiple-output electroslag remelting controller for coupled, consistent melt rate and immersion depth control Lmpc 2005 - Proceedings of the 2005 International Symposium On Liquid Metal Processing and Casting. 2005: 219-226. |
0.088 |
|
| 1987 |
Beaman JJ, Wang SY, Masada GY. Cycle time control of an onboard oxygen generation system. Aviation, Space, and Environmental Medicine. 58: 1225-9. PMID 3426498 |
0.084 |
|
| 1985 |
Khonsari MM, Beaman JJ. Thermohydrodynamic analysis of laminar incompressible journal bearings In: Am. Soc. Lubr. Engrs. Tech. Preprints Presented At the Asle 40th Annual Meeting, (Las Vegas, U.S.a.: May 6-9, 1985), Park. |
0.082 |
|
| 2002 |
Lappo K, Ramos JA, Murphy J, Wood K, Bourell DL, Beaman JJ. Surface roughness determination of as-received indirect-SLS parts by means of line profilometry Proceedings of the Tms Fall Meeting. 185-190. |
0.081 |
|
| 1987 |
Beaman JJ, Rosenberg RC. ADDITIONAL STRUCTURE IN BOND GRAPH MODELING Proceedings of the American Control Conference. 1444-1450. |
0.08 |
|
| 2003 |
Schmidt PS, Beaman JJ. PROCEED: A department-wide curriculum reform initiative in project-centered education Asee Annual Conference Proceedings. 2403-2414. |
0.074 |
|
| 1991 |
Matthews RD, Dongre SK, Beaman JJ. Intake and ECM submodel improvements for dynamic SI engine models: Examination of Tip-In/Tip-Out Sae Technical Papers. DOI: 10.4271/910074 |
0.071 |
|
| 1987 |
Paynter HM, Beaman JJ. ON THE FALL AND RISE OF THE CIRCUIT CONCEPT: CONTRASTING VIEWS OF NETWORK THERMO AND CHEMICAL NETWORKING Asme Bioeng Div Publ Bed. 5: 23-27. |
0.068 |
|
| 2003 |
Schmidt PS, Beaman JJ. Managing a major curriculum reform effort in a large research university Engineering Technology Management. 117-125. |
0.058 |
|
| 2013 |
Krane MJM, Jardy A, Williamson RL, Beaman JJ. Preface International Symposium On Liquid Metal Processing and Casting 2013, Lmpc 2013. ix. |
0.021 |
|
| Hide low-probability matches. |
