Year |
Citation |
Score |
2017 |
Gratton LJ, Travkin VS, Catton I. Morphology: Two-Temperature Statements For Convective Transport In Porous Media Journal of Enhanced Heat Transfer. 24: 183-200. DOI: 10.1615/Jenhheattransf.V24.I1-6.130 |
0.32 |
|
2017 |
Yao Q, Supowit J, Catton I. Investigation of the Use of an Inorganic Aqueous Solution in Copper-Made Phase-Change Heat Transfer Devices Journal of Heat Transfer-Transactions of the Asme. 140: 42901. DOI: 10.1115/1.4038190 |
0.42 |
|
2016 |
Sbutega K, Catton I. Galerkin method solution of a volume-averaged model for efficient conjugate heat transfer analysis Numerical Heat Transfer, Part B: Fundamentals. 69: 1-25. DOI: 10.1080/10407790.2015.1068029 |
0.573 |
|
2016 |
Stubblebine MJ, Yao Q, Supowit J, Catton I. A new method for evaluating heat pipe fluid compatibility Applied Thermal Engineering. 101: 796-803. DOI: 10.1016/J.Applthermaleng.2016.04.020 |
0.523 |
|
2016 |
Supowit J, Heflinger T, Stubblebine M, Catton I. Designer fluid performance and inclination angle effects in a flat grooved heat pipe Applied Thermal Engineering. 101: 770-777. DOI: 10.1016/J.Applthermaleng.2016.02.037 |
0.498 |
|
2015 |
Sbutega K, Geb D, Catton I. Modeling of Multiscale Heat Transfer Systems Using Volume Averaging Theory Advances in Heat Transfer. 47: 1-165. DOI: 10.1016/Bs.Aiht.2015.08.001 |
0.831 |
|
2014 |
Reilly SW, Catton I. Utilization of pore-size distributions to predict thermophysical properties and performance of biporous wick evaporators Journal of Heat Transfer. 136. DOI: 10.1115/1.4026624 |
0.759 |
|
2014 |
Geb D, Catton I. Nonlocal modeling and swarm-based design of heat sinks Journal of Heat Transfer. 136. DOI: 10.1115/1.4025300 |
0.819 |
|
2013 |
Catton I. In remembrance of Novak Zuber Multiphase Science and Technology. 25: 103-105. DOI: 10.1615/Multscientechn.V25.I2-4.20 |
0.455 |
|
2013 |
Sbutega K, Catton I. Efficient hydraulic and thermal analysis of heat sinks using volume averaging theory and Galerkin methods Multiphase Science and Technology. 25: 311-338. DOI: 10.1615/Multscientechn.V25.I2-4.120 |
0.511 |
|
2013 |
Sbutega K, Catton I. Application of fourier-galerkin method to volume averaging theory based model of heat sinks Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 8. DOI: 10.1115/IMECE2013-65244 |
0.478 |
|
2013 |
Reilly S, Catton I. Statistical based estimation of biporous evaporator dryout Asme 2013 Heat Transfer Summer Conf. Collocated With the Asme 2013 7th Int. Conf. On Energy Sustainability and the Asme 2013 11th Int. Conf. On Fuel Cell Science, Engineering and Technology, Ht 2013. 2. DOI: 10.1115/HT2013-17704 |
0.351 |
|
2013 |
Stubblebine M, Amouzegar L, Catton I. Passivation and performance of inorganic aqueous solutions in a grooved, aluminum flat heat pipe Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 8. DOI: 10.1115/1.4029694 |
0.542 |
|
2013 |
Geb D, Lerro A, Sbutega K, Catton I. Internal transport coefficient measurements in random fiber matrix heat exchangers Journal of Thermal Science and Engineering Applications. 6. DOI: 10.1115/1.4024707 |
0.815 |
|
2013 |
Zhou F, Catton I. A numerical investigation of turbulent flow and heat transfer in rectangular channels with elliptic scale-roughened walls Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 135. DOI: 10.1115/1.4024278 |
0.494 |
|
2013 |
Geb D, Zhou F, DeMoulin G, Catton I. Genetic algorithm optimization of a finned-tube heat exchanger modeled with volume-averaging theory Journal of Heat Transfer. 135. DOI: 10.1115/1.4024091 |
0.784 |
|
2013 |
Geb D, Ge M, Chu J, Catton I. Measuring transport coefficients in heterogeneous and hierarchical heat transfer devices Journal of Heat Transfer. 135. DOI: 10.1115/1.4023547 |
0.84 |
|
2013 |
Zhou F, Catton I. Obtaining closure for a plane fin heat sink with elliptic scale-roughened surfaces for Volume Averaging Theory (VAT) based modeling International Journal of Thermal Sciences. 71: 264-273. DOI: 10.1016/J.Ijthermalsci.2013.04.020 |
0.577 |
|
2013 |
Ju YS, Kaviany M, Nam Y, Sharratt S, Hwang GS, Catton I, Fleming E, Dussinger P. Planar vapor chamber with hybrid evaporator wicks for the thermal management of high-heat-flux and high-power optoelectronic devices International Journal of Heat and Mass Transfer. 60: 163-169. DOI: 10.1016/J.Ijheatmasstransfer.2012.12.058 |
0.558 |
|
2012 |
Zhou F, Catton I. Numerical investigation on turbulent flow and heat transfer of rectangular channels with elliptic scale-roughened walls Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 7: 3221-3229. DOI: 10.1115/IMECE2012-85059 |
0.338 |
|
2012 |
Reilly SW, Catton I. Utilization of pore-size distributions to predict performance of biporous wick evaporators Asme 2012 Heat Transfer Summer Conf. Collocated With the Asme 2012 Fluids Engineering Div. Summer Meeting and the Asme 2012 10th Int. Conf. On Nanochannels, Microchannels and Minichannels, Ht 2012. 1: 1021-1029. DOI: 10.1115/HT2012-58443 |
0.645 |
|
2012 |
Geb D, Sbutega K, Catton I. A new technique for measuring convective heat transfer coefficients in solid matrices for compact heat exchanger design Asme 2012 Heat Transfer Summer Conf. Collocated With the Asme 2012 Fluids Engineering Div. Summer Meeting and the Asme 2012 10th Int. Conf. On Nanochannels, Microchannels and Minichannels, Ht 2012. 1: 35-41. DOI: 10.1115/HT2012-58071 |
0.831 |
|
2012 |
Zhou F, Catton I. Volume Averaging Theory (VAT) based modeling and closure evaluation for fin-and-tube heat exchangers Heat and Mass Transfer/Waerme- Und Stoffuebertragung. 48: 1813-1823. DOI: 10.1007/s00231-012-1025-7 |
0.466 |
|
2011 |
Zhou F, Geb D, Catton I. Cooling performance comparisons of five different plate-pin compound heat sinks based on two different length scale Asme 2011 Pacific Rim Technical Conference and Exhibition On Packaging and Integration of Electronic and Photonic Systems, Interpack 2011. 2: 47-57. DOI: 10.1115/IPACK2011-52020 |
0.82 |
|
2011 |
Zhou F, Hansen NE, Geb DJ, Catton I. Determination of the number of tube rows to obtain closure for volume averaging theory based model of fin-and-tube heat exchangers Journal of Heat Transfer. 133. DOI: 10.1115/1.4004478 |
0.817 |
|
2011 |
Zhou F, Hansen NE, Geb DJ, Catton I. Obtaining closure for fin-and-tube heat exchanger modeling based on volume averaging theory (VAT) Journal of Heat Transfer. 133. DOI: 10.1115/1.4004393 |
0.836 |
|
2011 |
Reilly SW, Catton I. Utilization of advanced working fluids with biporous evaporators Journal of Thermal Science and Engineering Applications. 3. DOI: 10.1115/1.4004291 |
0.789 |
|
2011 |
Catton I. Conjugate heat transfer within a heterogeneous hierarchical structure Journal of Heat Transfer. 133. DOI: 10.1115/1.4003576 |
0.442 |
|
2011 |
Zhou F, Catton I. Numerical evaluation of flow and heat transfer in plate-pin fin heat sinks with various pin cross-sections Numerical Heat Transfer; Part a: Applications. 60: 107-128. DOI: 10.1080/10407782.2011.588574 |
0.476 |
|
2011 |
Reilly SW, Catton I. Utilization of advanced working fluids in heat pipes Asme/Jsme 2011 8th Thermal Engineering Joint Conference, Ajtec 2011. |
0.78 |
|
2011 |
Amouzegar L, Reilly SW, Catton I. Investigating the performance of bi-porous disk-shaped wick with the restricted vapor space, by developing an electric analogue method Asme/Jsme 2011 8th Thermal Engineering Joint Conference, Ajtec 2011. |
0.729 |
|
2011 |
Zhou F, Geb D, Catton I. Numerical investigation on air side performance of fin-and-tube heat exchangers with large diameter tubes and large number of tube rows Asme 2011 International Mechanical Engineering Congress and Exposition, Imece 2011. 1: 805-813. |
0.816 |
|
2011 |
Zhou F, Hansen N, Catton I. Numerical predictions of thermal and hydraulic performances of heat sinks with enhanced heat transfer capability Asme/Jsme 2011 8th Thermal Engineering Joint Conference, Ajtec 2011. |
0.501 |
|
2011 |
Zhou F, Hansen N, Catton I. VAT based modeling of plate-pin fin heat sink and obtaining closure from CFD solution Asme/Jsme 2011 8th Thermal Engineering Joint Conference, Ajtec 2011. |
0.509 |
|
2010 |
Zhou F, Hansen N, Catton I. Determining the computational domain length to obtain closure for VAT based modeling by 3D numerical simulation and field synergy analysis Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 2: 593-602. DOI: 10.1115/IMECE2010-37561 |
0.514 |
|
2010 |
Zhou F, Hansen N, Catton I. VAT based modeling of heat exchanger and obtaining closure from CFD solution Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 2: 583-591. DOI: 10.1115/IMECE2010-37519 |
0.5 |
|
2010 |
Amouzegar L, Catton I, Vadnjal A. Correlation for prediction of peak heat flux achieved with a bi-porous wick Asme International Mechanical Engineering Congress and Exposition, Proceedings. 9: 1991-1997. DOI: 10.1115/IMECE2009-13081 |
0.828 |
|
2010 |
Reilly SW, Catton I. Characterization of vapor escape restriction biporous wicks with monolayers for thermal ground plane optimization Asme International Mechanical Engineering Congress and Exposition, Proceedings. 9: 1827-1833. DOI: 10.1115/IMECE2009-12618 |
0.67 |
|
2010 |
Zhou F, Hansen N, Catton I. Obtaining closure for heat exchanger modeling based on Volume Averaging Theory (VAT) 2010 14th International Heat Transfer Conference, Ihtc 14. 4: 693-701. DOI: 10.1115/IHTC14-22971 |
0.467 |
|
2010 |
Hansen N, Catton I, Zhou F. Heat sink optimization; A multi-parameter optimization problem 2010 14th International Heat Transfer Conference, Ihtc 14. 3: 649-655. DOI: 10.1115/IHTC14-22968 |
0.445 |
|
2010 |
Reilly SW, Amouzegar L, Catton I. Comparison of vacuum chamber tested biporous wicks with thermal ground plane testing 2010 14th International Heat Transfer Conference, Ihtc 14. 5: 425-433. DOI: 10.1115/IHTC14-22947 |
0.777 |
|
2010 |
Geb DJ, Catton I. Non-intrusive heat transfer coefficient determination in a packed bed of spheres 2010 14th International Heat Transfer Conference, Ihtc 14. 6: 901-910. DOI: 10.1115/IHTC14-22354 |
0.828 |
|
2009 |
Vadnjal A, Catton I. A general approach to analysis of flow and heat transfer in packed beds Asme International Mechanical Engineering Congress and Exposition, Proceedings. 10: 1029-1039. DOI: 10.1115/IMECE2008-68189 |
0.825 |
|
2009 |
Hansen N, Catton I. Multi-level heatsink optimization Proceedings of the Asme Summer Heat Transfer Conference 2009, Ht2009. 2: 807-814. DOI: 10.1115/HT2009-88293 |
0.352 |
|
2009 |
Reilly SW, Catton I. Improving biporous heat transfer by addition of monoporous interface layer Proceedings of the Asme Summer Heat Transfer Conference 2009, Ht2009. 3: 327-333. DOI: 10.1115/HT2009-88257 |
0.747 |
|
2009 |
Catton I, Wulff W, Zuber N, Rohatgi U. Application of Fractional Scaling Analysis to Loss of Coolant Accidents: Component Level Scaling for Peak Clad Temperature Journal of Fluids Engineering-Transactions of the Asme. 131: 121401. DOI: 10.1115/1.4000370 |
0.301 |
|
2009 |
Wulff W, Zuber N, Rohatgi US, Catton I. Application of Fractional Scaling Analysis to Loss of Coolant Accidents, System Level Scaling for System Depressurization Journal of Fluids Engineering-Transactions of the Asme. 131: 81402. DOI: 10.1115/1.3155994 |
0.329 |
|
2009 |
Mitra D, Dhir VK, Catton I. Fluid-elastic instability in tube arrays subjected to air-water and steam-water cross-flow Journal of Fluids and Structures. 25: 1213-1235. DOI: 10.1016/J.Jfluidstructs.2009.07.002 |
0.375 |
|
2009 |
Semenic T, Catton I. Experimental study of biporous wicks for high heat flux applications International Journal of Heat and Mass Transfer. 52: 5113-5121. DOI: 10.1016/J.Ijheatmasstransfer.2009.05.005 |
0.82 |
|
2008 |
Semenic T, Lin YY, Catton I. Thermophysical properties of biporous heat pipe evaporators Journal of Heat Transfer. 130. DOI: 10.1115/1.2790020 |
0.755 |
|
2008 |
Catton I. Micro-channel heat sink optimization 14th International Workshop On Thermal Investigation of Ics and Systems, Therminic 2008. 177-182. DOI: 10.1109/THERMINIC.2008.4669904 |
0.443 |
|
2006 |
Semenic T, Catton I. Heat removal and thermophysical properties of biporous evaporators American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. DOI: 10.1115/IMECE2006-15928 |
0.803 |
|
2006 |
Vadnjal A, Catton I. Optimization of micro channel morphology American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. DOI: 10.1115/IMECE2006-15923 |
0.789 |
|
2006 |
Catton I. Transport phenomena in heterogeneous media based on volume averaging theory Heat and Mass Transfer/Waerme- Und Stoffuebertragung. 42: 537-551. DOI: 10.1007/s00231-005-0650-9 |
0.306 |
|
2005 |
Semenic T, Lin YY, Catton I. Biporous sintered copper for a closed loop heat pipe evaporator American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 376: 21-25. DOI: 10.1115/IMECE2005-82180 |
0.795 |
|
2005 |
Vadnjal A, Catton I. Modelling heat transfer performance of a thin bi-porous evaporator for a heat pipe Proceedings of the Asme Summer Heat Transfer Conference. 2: 279-284. DOI: 10.1115/HT2005-72241 |
0.831 |
|
2005 |
Lin YY, Semenic T, Catton I. Thermophysical properties of monoporous sintered copper Proceedings of the Asme Summer Heat Transfer Conference. 1: 17-23. DOI: 10.1115/HT2005-72239 |
0.745 |
|
2005 |
Semenic T, Lin YY, Catton I. Use of liquid film evaporation in biporous media to achieve high heat flux over large areas Proceedings of the Asme Summer Heat Transfer Conference. 2: 63-68. DOI: 10.1115/HT2005-72238 |
0.804 |
|
2005 |
Blake BA, Catton I. Optimization of a parallel plate heat sink using volume averaging theory Proceedings of the Asme Summer Heat Transfer Conference. 4: 695-702. DOI: 10.1115/HT2005-72237 |
0.46 |
|
2005 |
Horvat A, Mavko B, Catton I. The Galerkin method solution of the conjugate heat transfer problems for the cross-flow conditions Strojniski Vestnik/Journal of Mechanical Engineering. 51: 527-533. |
0.43 |
|
2004 |
Vadnjal A, Catton I. Optimization of absorption in a porous media American Society of Mechanical Engineers, Noise Control and Acoustics Division (Publication) Nca. 31: 115-122. DOI: 10.1115/IMECE2004-60140 |
0.725 |
|
2004 |
Paul MR, Catton I. The relaxation of two-dimensional rolls in Rayleigh-Bénard convection Physics of Fluids. 16: 1262-1266. DOI: 10.1063/1.1669335 |
0.642 |
|
2003 |
Vadnjal A, Catton I. Sound attenuation in heterogeneous porous media due to viscous effects American Society of Mechanical Engineers, Noise Control and Acoustics Division (Publication) Nca. 30: 127-133. DOI: 10.1115/IMECE2003-41496 |
0.747 |
|
2003 |
Horvat A, Catton I. Numerical technique for modeling conjugate heat transfer in an electronic device heat sink International Journal of Heat and Mass Transfer. 46: 2155-2168. DOI: 10.1016/S0017-9310(02)00532-X |
0.465 |
|
2003 |
Catton I, Hu K. VAT Based Optimization of Heat Transfer in a Flat Channel Filled with a Porous Media Proceedings of the Asme Summer Heat Transfer Conference. 2003: 645-653. |
0.423 |
|
2003 |
Rizzi M, Catton I. An Experimental Study of Pin Fin Heat Sinks and Determination of End Wall Heat Transfer Proceedings of the Asme Summer Heat Transfer Conference. 2003: 445-452. |
0.515 |
|
2003 |
Horvat A, Catton I. Application of Galerkin method to conjugate heat transfer calculation Numerical Heat Transfer, Part B: Fundamentals. 44: 509-531. |
0.44 |
|
2002 |
Horvat A, Catton I. Modeling of forced convection in an electronic device heat sink as porous media flow American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 372: 207-212. DOI: 10.1115/IMECE2002-39246 |
0.516 |
|
2002 |
Catton I, Stroes GR. A semi-analytical model to predict the capillary limit of heated inclined triangular capillary grooves Journal of Heat Transfer. 124: 162-168. DOI: 10.1115/1.1404119 |
0.519 |
|
2002 |
Horvat A, Catton I. An analysis of conjugate heat transfer in the heat sink of an electronic chip Strojniski Vestnik/Journal of Mechanical Engineering. 48: 482-490. |
0.506 |
|
2002 |
Horvat A, Rizzi M, Catton I. Numerical investigation of chip cooling using Volume Averaging Technique (VAT) Computational Studies. 4: 373-382. |
0.506 |
|
2001 |
Wang J, Catton I. Enhanced evaporation heat transfer in triangular grooves covered with a thin fine porous layer Applied Thermal Engineering. 21: 1721-1737. DOI: 10.1016/S1359-4311(01)00044-8 |
0.464 |
|
2001 |
Wang J, Catton I. Evaporation heat transfer in thin biporous media Heat and Mass Transfer/Waerme- Und Stoffuebertragung. 37: 275-281. DOI: 10.1007/s002310000138 |
0.481 |
|
2001 |
Wang J, Catton I. Biporous heat pipes for high power electronic device cooling Annual Ieee Semiconductor Thermal Measurement and Management Symposium. 211-218. |
0.502 |
|
2001 |
Jones S, Catton I. Non-Intrusive Heat Transfer Coefficient Determination in High Porosity Reticulated Foams Proceedings of the National Heat Transfer Conference. 2: 1277-1286. |
0.446 |
|
2001 |
Hu K, Travkin VS, Catton I. Two Scale Hierarchical Capillary Network Model of Heat and Momentum Transport in Porous Media Proceedings of the National Heat Transfer Conference. 2: 1299-1310. |
0.358 |
|
2001 |
Travkin VS, Hu K, Catton I. Statistics of mathematical two-scale closure of momentum, heat and charge transport problems with stochastic orientation of porous medium capillaries American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 369: 67-78. |
0.333 |
|
2001 |
Travkin VS, Hu K, Catton I. Multi-variant Optimization in Semiconductor Heat Sink Design Proceedings of the National Heat Transfer Conference. 1: 73-83. |
0.501 |
|
2001 |
Wang J, Merilo E, Catton I. Investigation of evaporation heat transfer in porous wicks for high heat flux applications Proceedings of the National Heat Transfer Conference. 2: 1063-1070. |
0.509 |
|
2001 |
Travkin VS, Hu K, Catton I. Exact Closure Procedures of Hierarchical VAT Capillary Thermo-Convective Problem for Turbulent and Laminar Regimes American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 369: 203-214. |
0.353 |
|
2001 |
Travkin VS, Hu K, Catton I. Numerical Simulation of Conjugate Porous Channels at the Upper Scale of a Two Scale Hierarchical Media Proceedings of the National Heat Transfer Conference. 2: 1859-1871. |
0.339 |
|
2000 |
Travkin VS, Catton I. Turbulent Flow and Heat Transfer Modeling in a Flat Channel with Regular Highly Rough Walls International Journal of Fluid Mechanics Research. 27: 159-199. DOI: 10.1615/Interjfluidmechres.V27.I2-4.10 |
0.484 |
|
1998 |
Huckaby ED, Catton I. The impact of conjugate heat transfer on thermally developing channel flow 7th Aiaa/Asme Joint Thermophysics and Heat Transfer Conference. |
0.377 |
|
1998 |
Stroes GR, Catton I. A semi-analytical model to predict the dryout point in heated inclined triangular capillary grooves American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 357: 107-113. |
0.422 |
|
1998 |
Travkin VS, Catton I. Porous media transport descriptions - Non-local, linear and non-linear against effective thermal/fluid properties Advances in Colloid and Interface Science. 76: 389-443. |
0.384 |
|
1997 |
Stroes GR, Catton I. An experimental investigation of the capillary performance of triangular versus sinusoidal channels Journal of Heat Transfer. 119: 851-853. DOI: 10.1115/1.2824194 |
0.467 |
|
1996 |
Gratton LJ, Travkin VS, Catton I. The Influence of Morphology Upon Two-Temperature Statements for Convective Transport in Porous Media Journal of Enhanced Heat Transfer. 3: 129-145. DOI: 10.1615/Jenhheattransf.V3.I2.60 |
0.322 |
|
1996 |
Rohloff TJ, Catton I. Low pressure differential discharge characteristics of saturated liquids passing through orifices Journal of Fluids Engineering-Transactions of the Asme. 118: 520-525. DOI: 10.1115/1.2817789 |
0.314 |
|
1995 |
Adnani P, Catton I, Abdou MA. Non-darcian forced convection in porous media with anisotropic dispersion Journal of Heat Transfer. 117: 447-451. DOI: 10.1115/1.2822542 |
0.567 |
|
1995 |
Travkin V, Catton I. Two-temperature model for turbulent flow and heat transfer in a porous layer Journal of Fluids Engineering, Transactions of the Asme. 117: 181-188. DOI: 10.1115/1.2816810 |
0.519 |
|
1995 |
Apostolakis GE, Catton I, Issacci F, Jones S, Paul M, Paulos T, Paxton K. Risk-based spacecraft fire safety experiments Reliability Engineering and System Safety. 49: 275-291. DOI: 10.1016/0951-8320(95)00046-5 |
0.653 |
|
1994 |
Catton I, Chung M. Two-phase flow in porous media with phase change: post dryout heat transfer and steam injection Nuclear Engineering and Design. 151: 185-202. DOI: 10.1016/0029-5493(94)90042-6 |
0.454 |
|
1993 |
Chung M, Catton I. Steam injection into a slow water flow through porous media Transactions - Asme: Journal of Heat Transfer. 115: 734-743. DOI: 10.1115/1.2910745 |
0.353 |
|
1993 |
Marn J, Catton I. Analysis of flow induced vibration using the vorticity transport equation Transactions - Asme: Journal of Fluids Engineering. 115: 485-492. DOI: 10.1115/1.2910164 |
0.313 |
|
1993 |
Adnani P, Catton I, Raffray AR, Abdou MA. Effective Thermal Conductivity Of Binary Mixtures At High Solid To Gas Conductivity Ratios Chemical Engineering Communications. 120: 45-58. DOI: 10.1080/00986449308936123 |
0.309 |
|
1993 |
Catton I, Marn J. Some models for the prediction of fluid elastic instability Nuclear Engineering and Design. 139: 105-119. DOI: 10.1016/0029-5493(93)90265-B |
0.352 |
|
1992 |
Marn J, Catton I. On stability analysis of a flexible cylinder in an array of rigid cylinders Journal of Fluids Engineering, Transactions of the Asme. 114: 12-19. DOI: 10.1115/1.2909989 |
0.344 |
|
1992 |
Catton I, Chung M. An experimental study of steam injection into a uniform water flow through porous media WäRme - Und StoffüBertragung. 27: 29-35. DOI: 10.1007/BF01589975 |
0.322 |
|
1992 |
Travkin V, Catton I. Models of turbulent thermal diffusivity and transfer coefficients for a regular packed bed of spheres American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 193: 15-23. |
0.44 |
|
1991 |
Issacci F, Catton I, Ghoniem NM. Vapor Dynamics of Heat Pipe Start-Up Journal of Heat Transfer-Transactions of the Asme. 113: 985-994. DOI: 10.1115/1.2911232 |
0.414 |
|
1991 |
Chung M, Catton I. Post-dryout heat transfer in a multi-dimensional porous bed Nuclear Engineering and Design. 128: 289-304. DOI: 10.1016/0029-5493(91)90167-G |
0.582 |
|
1991 |
Issaci F, Catton I. Use of spectral methods for heat pipe analysis Aiche Symposium Series. 87: 198-206. |
0.376 |
|
1991 |
Adnani P, Catton I, Abdou MA. Influence of hydrodynamic dispersion on convection onset of a porous layer with volumetric heating American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 181: 55-62. |
0.383 |
|
1991 |
Issacci F, Huckaby D, Catton I. Analysis of heat pipe vapor dynamics using the Galerkin method American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 182: 67-77. |
0.425 |
|
1990 |
Madooglu K, Catton I, Ghebremichael F, Goodman J. Condensation Phenomena In Quasi-One Dimensional Magnetogasdynamic Flow Chemical Engineering Communications. 87: 107-122. DOI: 10.1080/00986449008940686 |
0.417 |
|
1990 |
Issacci F, Catton I. Transient flow patterns and heat transfer in heat pipes American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 102: 31-33. |
0.368 |
|
1990 |
Issacci F, Ghoniem NM, Catton I. Vapor flow patterns during a start-up transient in heat pipes American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 135: 41-47. |
0.378 |
|
1990 |
Marn J, Issacci F, Catton I. Measurements of temperature and concentration fields in a rectangular heat pipe American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 135: 33-39. |
0.389 |
|
1989 |
Issacci F, Catton I, Heiss A, Ghoniem NM. Analysis of Heat Pipe Vapor Dynamics Chemical Engineering Communications. 85: 85-94. DOI: 10.1080/00986448908940349 |
0.519 |
|
1988 |
Catton I. Wavenumber selection in Benard convection Journal of Heat Transfer. 110. DOI: 10.1115/1.3250617 |
0.336 |
|
1988 |
Georgiadis JG, Catton I. EFFECTIVE EQUATION GOVERNING CONVECTIVE TRANSPORT IN POROUS MEDIA Journal of Heat Transfer. 110: 635-641. DOI: 10.1115/1.3250539 |
0.672 |
|
1988 |
Mirzamoghadam AV, Catton I. HOLOGRAPHIC INTERFEROMETRY INVESTIGATION OF ENHANCED TUBE MENISCUS BEHAVIOR Journal of Heat Transfer. 110: 208-213. DOI: 10.1115/1.3250453 |
0.452 |
|
1988 |
Mirzamoghadam A, Catton I. PHYSICAL MODEL OF THE EVAPORATING MENISCUS Journal of Heat Transfer. 110: 201-207. DOI: 10.1115/1.3250452 |
0.511 |
|
1988 |
Issacci F, Ghoniem NM, Catton I. Magnetohydrodynamic flow in a curved pipe Phys. Fluids. 31: 65-82. DOI: 10.1063/1.866578 |
0.347 |
|
1988 |
Georgiadis JG, Catton I. Dispersion in cellular thermal convection in porous layers International Journal of Heat and Mass Transfer. 31: 1081-1091. DOI: 10.1016/0017-9310(88)90096-8 |
0.677 |
|
1988 |
Catton I, Georgiadis JG, Adnani P. Impact of nonlinear convective processes on transport phenomena in porous media American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 96: 767-777. |
0.587 |
|
1987 |
Swanson LW, Catton I. ENHANCED HEAT TRANSFER DUE TO SECONDARY FLOWS IN MIXED TURBULENT CONVECTION Journal of Heat Transfer. 109: 943-946. DOI: 10.1115/1.3248207 |
0.503 |
|
1987 |
Tsai TP, Catton I. The Effect of Flow From Below on Dryout Heat Flux Journal of Heat Transfer-Transactions of the Asme. 109: 491-497. DOI: 10.1115/1.3248109 |
0.519 |
|
1987 |
Catton I, Jakobsson JO. The Effect of Pressure on Dryout of a Saturated Bed of Heat-Generating Particles Journal of Heat Transfer-Transactions of the Asme. 109: 185-195. DOI: 10.1115/1.3248042 |
0.473 |
|
1987 |
Buell JC, Catton I. Steady bimodal convection in a cylinder at large Prandtl numbers Physics of Fluids. 30: 318-321. DOI: 10.1063/1.866380 |
0.472 |
|
1987 |
Swanson LW, Catton I. PWR annulus thermal hydraulics important to analysis of pressurized thermal shock Nuclear Engineering and Design. 102: 105-114. DOI: 10.1016/0029-5493(87)90243-3 |
0.558 |
|
1987 |
Swanson LW, Catton I. Surface renewal theory for turbulent mixed convection in vertical ducts International Journal of Heat and Mass Transfer. 30: 2271-2279. DOI: 10.1016/0017-9310(87)90220-1 |
0.357 |
|
1987 |
Jonsson T, Catton I. PRANDTL NUMBER DEPENDENCE OF NATURAL CONVECTION IN POROUS MEDIA Journal of Heat Transfer. 109: 371-377. |
0.31 |
|
1987 |
Georgiadis JG, Catton I. EFFECT OF HYDRODYNAMIC DISPERSION ON HEAT TRANSPORT IN THE POROUS BENARD PROBLEM American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 76: 57-64. |
0.668 |
|
1987 |
Catton I, Jakobsson JO. EFFECT OF PRESSURE ON DRYOUT OF A SATURATED BED OF HEAT-GENERATING PARTICLES Journal of Heat Transfer. 109: 185-195. |
0.37 |
|
1987 |
Tsai TP, Catton I. EFFECT OF FLOW FROM BELOW ON DRYOUT HEAT FLUX Journal of Heat Transfer. 109: 491-497. |
0.425 |
|
1987 |
Georgiadis JG, Catton I. TRANSPORT IN PIPES FILLED WITH UNIFORM, NON-UNIFORM AND RANDOM POROUS MEDIA . 2: 395-400. |
0.59 |
|
1986 |
Buell JC, Catton I. Wavenumber selection in large‐amplitude axisymmetric convection Physics of Fluids. 29: 23-30. DOI: 10.1063/1.865980 |
0.333 |
|
1986 |
Buell JC, Catton I. Wavenumber selection in ramped Rayleigh-Bénard convection Journal of Fluid Mechanics. 171: 477-494. DOI: 10.1017/S0022112086001532 |
0.356 |
|
1986 |
Lienhard JH, Catton I. HEAT TRANSFER ACROSS A TWO-FLUID-LAYER REGION Journal of Heat Transfer. 108: 198-205. |
0.457 |
|
1986 |
Mirzamoghadam AV, Catton I. ANALYSIS ON THE EVAPORATING MENISCUS OSCILLATION Heat Transfer, Proceedings of the International Heat Transfer Conference. 4: 1869-1875. |
0.346 |
|
1985 |
Jonsson T, Catton I. PRANDTL NUMBER DEPENDENCE OF NATURAL CONVECTION IN POROUS MEDIUM American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 46: 21-29. DOI: 10.1115/1.3248090 |
0.441 |
|
1985 |
Jacobs JW, Bunster A, Catton I, Plesset MS. EXPERIMENTAL RAYLEIGH-TAYLOR INSTABILITY IN A CIRCULAR TUBE Journal of Fluids Engineering, Transactions of the Asme. 107: 460-466. DOI: 10.1115/1.3242514 |
0.325 |
|
1985 |
Georgiadis J, Catton I. FREE CONVECTIVE MOTION IN AN INFINITE VERTICAL POROUS SLOT: THE NON-DARCIAN REGIME American Society of Mechanical Engineers (Paper). DOI: 10.1016/0017-9310(85)90060-2 |
0.597 |
|
1985 |
Swanson L, Catton I. MIXED CONVECTION HEAT TRANSFER IN A FINITE HEIGHT SLOT WITH CONSTANT WALL HEAT FLUX American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 42: 99-104. |
0.461 |
|
1985 |
Mirzamoghadam AV, Catton I. HOLOGRAPHIC INTERFEROMETRY INVESTIGATION OF MENISCUS BEHAVIOR American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 47: 49-56. |
0.326 |
|
1984 |
Tsai FP, Jakobsson J, Catton I, Dhir VK. Dryout of an inductively heated bed of steel particles with subcooled flow from beneath the bed Nuclear Technology. 65: 10-15. DOI: 10.13182/Nt84-A33367 |
0.502 |
|
1984 |
Georgiadis J, Catton I. PRANDTL NUMBER EFFECT ON BENARD CONVECTION IN POROUS MEDIA American Society of Mechanical Engineers (Paper). DOI: 10.1115/1.3246917 |
0.701 |
|
1984 |
Somerton CW, McDonough JM, Catton I. Natural Convection in a Volumetrically Heated Porous Layer Journal of Heat Transfer-Transactions of the Asme. 106: 241-244. DOI: 10.1115/1.3246645 |
0.465 |
|
1984 |
Jacobs JW, Catton I, Plesset MS. HYDRODYNAMIC STABILITY OF RAPIDLY EVAPORATING LIQUIDS WITH TIME DEPENDENT BASE STATES Journal of Fluids Engineering, Transactions of the Asme. 106: 352-358. DOI: 10.1115/1.3243127 |
0.326 |
|
1984 |
Somerton CW, Catton I. REFLOOD TIME AS A DETERMINATION FOR DRYOUT Journal of Heat Transfer. 106: 656-658. |
0.329 |
|
1983 |
Catton I, Lienhard J5. THERMAL STABILITY OF TWO FLUID LAYERS SEPARATED BY A SOLID INTERLAYER OF FINITE THICKNESS AND THERMAL CONDUCTIVITY . 2: 459-466. DOI: 10.1115/1.3246722 |
0.407 |
|
1983 |
Buell JC, Catton I. Effect of rotation on the stability of a bounded cylindrical layer of fluid heated from below Physics of Fluids. 26: 892-896. DOI: 10.1063/1.864238 |
0.447 |
|
1983 |
Tsai FP, Catton I. ON DRYOUT HEAT FLUX AND PRESSURE DROP OF A SUBMERGED INDUCTIVELY HEATED BED FLOW FROM BELOW Aiche Symposium Series. 296-302. |
0.454 |
|
1983 |
Buell JC, Catton I. EFFECT OF WALL CONDUCTION ON THE STABILITY OF A FLUID IN A RIGHT CIRCULAR CYLINDER HEATED FROM BELOW Journal of Heat Transfer. 105: 255-260. |
0.329 |
|
1983 |
Lienhard JH, Catton I. HEAT TRANSFER ACROSS A TWO FLUID LAYER REGION American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 26: 1-9. |
0.457 |
|
1983 |
Jakobsson JO, Catton I, Squarer D. EFFECT OF PRESSURE ON DRYOUT HEAT FLUX IN A VOLUME HEATED POROUS BED . 2: 467-472. |
0.467 |
|
1983 |
Catton I, Dhir VK, Somerton CW. EXPERIMENTAL STUDY OF DEBRIS BED COOLABILITY UNDER POOL BOILING CONDITIONS Electric Power Research Institute (Report) Epri Np. |
0.346 |
|
1982 |
Ghiaasiaan SM, Catton I, Duffey R. THERMAL HYDRAULIC AND TWO-PHASE PHENOMENA IN REFLOODING OF NUCLEAR REACTOR CORES American Society of Mechanical Engineers (Paper). DOI: 10.1115/1.3243153 |
0.651 |
|
1982 |
Dhir VK, Catton I. Boiling in a porous bed Applied Scientific Research. 38: 69-76. DOI: 10.1007/978-94-009-7532-3_6 |
0.362 |
|
1982 |
Toman WI, Catton I. Multidimensional thermal-hydraulic reflood phenomna in a 1962-rod slab core. Volume 1 Palo Alto, U.S.a., Electr. Power Res. Inst., May 1982. 1. |
0.371 |
|
1982 |
Somerton CW, Catton I. ON THE THERMAL INSTABILITY OF SUPERPOSED POROUS AND FLUID LAYERS Journal of Heat Transfer. 104: 160-165. |
0.388 |
|
1981 |
Catton I, Brinsfield WA, Ghiaasiaan M. HEAT TRANSFER FROM A HEATED POOL TO A MELTING MISCIBLE SUBSTRATE American Society of Mechanical Engineers (Paper). DOI: 10.1115/1.3245605 |
0.532 |
|
1981 |
Dhir VK, Duffey RB, Catton I. QUENCHING STUDIES ON A ZIRCALOY ROD BUNDLE Journal of Heat Transfer. 103: 293-299. DOI: 10.1115/1.3244456 |
0.359 |
|
1981 |
Somerton C, Catton I. POWER INTEGRAL SOLUTION TO HEAT TRANSFER ACROSS SUPERPOSED POROUS AND FLUID LAYERS American Society of Mechanical Engineers (Paper). |
0.405 |
|
1981 |
Somerton C, Catton I, Thompson L. EXPERIMENTAL INVESTIGATION INTO DRYOUT IN DEEP DEBRIS BEDS American Society of Mechanical Engineers (Paper). |
0.405 |
|
1980 |
Yao L, Catton I, Mcdonough JM. Bouyancy-driven asymmetric water boundary layer along a heated cylinder Journal of Fluid Mechanics. 98: 417-434. DOI: 10.1017/S0022112080000225 |
0.43 |
|
1980 |
McDonough JM, Catton I. A mixed finite difference-Galerkin procedure for two-dimensional convection in a square box . DOI: 10.1016/0017-9310(82)90208-3 |
0.407 |
|
1979 |
Dhir VK, Catton I. Dryout heat fluxes in debris beds cooled at the bottom and having subcooled liquid at the top Nuclear Technology. 46: 356-361. DOI: 10.13182/Nt79-A32339 |
0.549 |
|
1979 |
McDonough JM, Catton I. Wavenumber selection via thermodynamic stability for two-dimensional Benardconvection . |
0.332 |
|
1979 |
Somerton CW, Catton I. EFFECT OF APPLIED TEMPERATURE GRADIENTS ON THE CONVECTIVE INSTABILITY OF A VOLUMETRICALLY HEATED POROUS BED Asme Pap. |
0.442 |
|
1978 |
Taghavi-Tafreshi K, Dhir VK, Catton I. Thermal and hydrodynamic phenomena associated with melting of horizontal substrate placed beneath a heavier immiscible liquid . DOI: 10.1115/1.3450967 |
0.455 |
|
1978 |
Yao L, Catton I. Thermal Instability of a Volumetrically-Heated Pool With Phase Change and a Free Upper Surface Journal of Heat Transfer-Transactions of the Asme. 100: 376-378. DOI: 10.1115/1.3450816 |
0.449 |
|
1978 |
Yao L, Catton I, McDonough JM. Free-Forced Convection from a Heated Longitudinal Horizontal Cylinder Numerical Heat Transfer Part B-Fundamentals. 1: 255-266. DOI: 10.1080/10407787808913375 |
0.41 |
|
1978 |
Arakeri VH, Catton I, Kastenberg WE, Plesset MS. Thermal interaction for molten tin dropped into water International Journal of Heat and Mass Transfer. 21: 325-333. DOI: 10.1016/0017-9310(78)90125-4 |
0.324 |
|
1978 |
Lun-Shin Y, Catton I. The buoyancy and variable viscosity effects on a water laminar boundary layer along a heated longitudinal horizontal cylinder International Journal of Heat and Mass Transfer. 21: 407-414. DOI: 10.1016/0017-9310(78)90074-1 |
0.464 |
|
1978 |
Somerton CW, Catton I. CONVECTIVE INSTABILITY OF A VOLUMETRICALLY HEATED POROUS BED . 71-79. |
0.387 |
|
1978 |
Dhir VK, Catton I. PREDICTION OF DRYOUT HEAT FLUXES IN BEDS OF VOLUMETRICALLY HEATED PARTICLES Proc of the Int Meet On Fast React Saf and Relat Phys. 4: 2026-2035. |
0.359 |
|
1978 |
Taghavi-Tafreshi K, Dhir VK, Catton I. Thermal and hydrodynamic phenomena associated with melting of horizontal substrate placed beneath a heavier immisicible liquid . |
0.376 |
|
1977 |
Dhir V, Catton I. DRYOUT HEAT FLUXES FOR INDUCTIVELY HEATED PARTICULATE BEDS Journal of Heat Transfer. 99: 250-256. DOI: 10.1115/1.3450677 |
0.486 |
|
1977 |
Yao LS, Catton I. BUOYANCY CROSS-FLOW EFFECTS ON LONGITUDINAL BOUNDARY LAYER FLOW ALONG A HEATED HORIZONTAL HOLLOW CYLINDER Journal of Heat Transfer. 99: 122-124. DOI: 10.1115/1.3450631 |
0.364 |
|
1977 |
Arnold JN, Edwards DK, Catton I. EFFECT OF TILT AND HORIZONTAL ASPECT RATIO ON NATURAL CONVECTION IN A RECTANGULAR HONEYCOMB Journal of Heat Transfer. 99: 120-122. DOI: 10.1115/1.3450630 |
0.451 |
|
1977 |
Rhee SJ, Dhir VK, Catton I. Natural convection heat transfer in beds of inductively heated particles . DOI: 10.1115/1.3450507 |
0.521 |
|
1977 |
Yao L, Catton I, Gazley C. Transient thermal-hydraulic analysis for reactor cores Nuclear Engineering and Design. 44: 43-51. DOI: 10.1016/0029-5493(77)90121-2 |
0.303 |
|
1977 |
Wassel AT, Catton I. Diffusion from a line source in a neutral or stably stratified atmospheric surface layer International Journal of Heat and Mass Transfer. 20: 383-391. DOI: 10.1016/0017-9310(77)90159-4 |
0.332 |
|
1976 |
Dhir V, Castle J, Catton I. ROLE OF TAYLOR INSTABILITY ON SUBLIMATION OF A HORIZONTAL SLAB OF DRY ICE American Society of Mechanical Engineers (Paper). DOI: 10.1115/1.3450711 |
0.464 |
|
1976 |
Harpole GM, Catton I. LAMINAR NATURAL CONVECTION ABOUT DOWNWARD FACING HEATED BLUNT BODIES TO LIQUID METALS American Society of Mechanical Engineers (Paper). DOI: 10.1115/1.3450520 |
0.466 |
|
1976 |
GARRISON PW, HARVEY DW, CATTON I. LAMINAR COMPRESSIBLE FLOW BETWEEN ROTATING DISCS . DOI: 10.1115/1.3448330 |
0.348 |
|
1976 |
Yao LS, Catton I. BUOYANCY CROSS-FLOW EFFECTS IN THE BOUNDARY LAYER ON A HEATED HORIZONTAL CYLINDER American Society of Mechanical Engineers (Paper). |
0.351 |
|
1976 |
Suo-Anttila AJ, Catton I. LARGE AMPLITUDE CELLULAR CONVECTION American Society of Mechanical Engineers (Paper). |
0.4 |
|
1975 |
Suo-Anttila AJ, Catton I. EFFECT OF A STABILIZING TEMPERATURE GRADIENT ON HEAT TRANSFER FROM A MOLTEN FUEL LAYER WITH VOLUMETRIC HEATING Journal of Heat Transfer. 97: 544-548. DOI: 10.1115/1.3450426 |
0.491 |
|
1975 |
Wassel AT, Edwards DK, Catton I. Molecular gas radiation and laminar or turbulent heat diffusion in a cylinder with internal heat generation International Journal of Heat and Mass Transfer. 18: 1267-1276. DOI: 10.1016/0017-9310(75)90236-7 |
0.492 |
|
1975 |
Edwards DK, Arnold JN, Catton I. END-CLEARANCE EFFECTS ON RECTANGULAR-HONEYCOMB SOLAR COLLECTORS Int Sol Energy Congr and Expo, Extended Abstr, Sol Use Now $-$ a Resour For People. 209-210. |
0.438 |
|
1973 |
Graves AW, Catton I. NUMERICAL MODEL OF HEAT TRANSFER IN A ROD BUNDLE WITH HELICAL WIRE WRAP SPACERS Journal of Heat Transfer. 95: 559-562. DOI: 10.1115/1.3450115 |
0.372 |
|
1973 |
Ayyaswamy P, Catton I. The Boundary-Layer Regime for Natural Convection in a Differentially Heated, Tilted Rectangular Cavity Journal of Heat Transfer-Transactions of the Asme. 95: 543-545. DOI: 10.1115/1.3450107 |
0.682 |
|
1973 |
Wassel AT, Catton I. Calculation of turbulent boundary layers over flat plates with different phenomenological theories of turbulence and variable turbulent Prandtl number International Journal of Heat and Mass Transfer. 16: 1547-1563. DOI: 10.1016/0017-9310(73)90183-X |
0.351 |
|
1972 |
Catton I. Effect of Wall Conduction on the Stability of a Fluid in a Rectangular Region Heated from Below Journal of Heat Transfer-Transactions of the Asme. 94: 446-452. DOI: 10.1115/1.3449966 |
0.496 |
|
1972 |
Catton I. The effect of insulating vertical walls on the onset of motion in a fluid heated from below International Journal of Heat and Mass Transfer. 15: 665-672. DOI: 10.1016/0017-9310(72)90112-3 |
0.324 |
|
1970 |
Catton I, Easton CR. Nonlinear free surface effects in tank draining at low gravity Aiaa Journal. 8: 2195-2199. DOI: 10.2514/3.6086 |
0.302 |
|
1970 |
Catton I, Sherman M. Feasibility of Rotational Destratification of Space-Stored Liquid Cryogens. Aiaa Journal. 8: 127-131. DOI: 10.2514/3.5616 |
0.425 |
|
1970 |
Burge GW, Catton I, Easton CR, Madsen RA. Numerical analysis of low-g propellant flow problems Journal of Spacecraft and Rockets. 7: 89-91. DOI: 10.2514/3.29872 |
0.376 |
|
1970 |
Catton I, Edwards DK. Initiation of thermal convection in finite right circular cylinders Aiche Journal. 16: 594-601. DOI: 10.1002/Aic.690160415 |
0.459 |
|
1969 |
Edwards DK, Catton I. Prediction of heat transfer by natural convection in closed cylinders heated from below International Journal of Heat and Mass Transfer. 12: 23-30. DOI: 10.1016/0017-9310(69)90075-1 |
0.563 |
|
1967 |
Sherman M, Catton I. Thermal instability in a spherical region heated from below Physics of Fluids. 10: 1817-1822. |
0.398 |
|
1966 |
Catton I. Natural convection in horizontal liquid layers Physics of Fluids. 9: 2521-2522. |
0.338 |
|
Show low-probability matches. |