Year |
Citation |
Score |
2014 |
Wright LM, Han J. Heat Transfer Enhancement For Turbine Blade Internal Cooling Journal of Enhanced Heat Transfer. 21: 111-140. DOI: 10.1615/Jenhheattransf.2015012169 |
0.566 |
|
2014 |
Wright LM, Han JC. Heat transfer enhancement for turbine blade internal cooling Journal of Enhanced Heat Transfer. 21: 111-140. |
0.488 |
|
2013 |
Wright LM, Han JC. Heat transfer enhancement for turbine blade internal cooling Asme 2013 Heat Transfer Summer Conf. Collocated With the Asme 2013 7th Int. Conf. On Energy Sustainability and the Asme 2013 11th Int. Conf. On Fuel Cell Science, Engineering and Technology, Ht 2013. 3. DOI: 10.1115/HT2013-17813 |
0.432 |
|
2013 |
Martin EL, Wright LM, Crites DC. Impingement heat transfer enhancement on a cylindrical, leading edge model with varying jet temperatures Journal of Turbomachinery. 135. DOI: 10.1115/1.4007529 |
0.385 |
|
2012 |
Jordan CN, Wright LM, Crites DC. Effect of impingement supply condition on leading edge heat transfer with rounded impinging jets Asme 2012 Heat Transfer Summer Conf. Collocated With the Asme 2012 Fluids Engineering Div. Summer Meeting and the Asme 2012 10th Int. Conf. On Nanochannels, Microchannels and Minichannels, Ht 2012. 1: 841-850. DOI: 10.1115/HT2012-58410 |
0.412 |
|
2012 |
Wright LM, Elston CA. Experimental investigation of heat transfer in a leading edge, two-pass serpentine passage at high rotation numbers Asme 2012 Heat Transfer Summer Conf. Collocated With the Asme 2012 Fluids Engineering Div. Summer Meeting and the Asme 2012 10th Int. Conf. On Nanochannels, Microchannels and Minichannels, Ht 2012. 1: 827-839. DOI: 10.1115/HT2012-58360 |
0.466 |
|
2012 |
Jordan CN, Wright LM, Crites DC. Impingement heat transfer on a cylindrical, concave surface with varying jet geometries Proceedings of the Asme Turbo Expo. 4: 335-346. DOI: 10.1115/GT2012-68818 |
0.412 |
|
2012 |
Martin EL, Wright LM, Crites DC. Impingement heat transfer enhancement on a cylindrical, leading edge model with varying jet temperatures Proceedings of the Asme Turbo Expo. 4: 323-334. DOI: 10.1115/1.4007529 |
0.444 |
|
2012 |
Neil Jordan C, Wright LM. Heat Transfer Enhancement in a Rectangular (AR = 3:1) Channel With V-Shaped Dimples Journal of Turbomachinery. 135. DOI: 10.1115/1.4006422 |
0.543 |
|
2011 |
Jordan CN, Wright LM. Heat transfer enhancement in a rectangular (AR = 3:1) channel with V-shaped dimples Proceedings of the Asme Turbo Expo. 5: 1505-1516. DOI: 10.1115/1.4006422 |
0.62 |
|
2011 |
Mart SR, McClain ST, Wright LM. Turbulent convection from deterministic roughness distributions with varying thermal conductivities Proceedings of the Asme Turbo Expo. 5: 1043-1055. DOI: 10.1115/1.4004751 |
0.41 |
|
2011 |
Wright LM, McClain ST, Clemenson MD. Effect of freestream turbulence intensity on film cooling jet structure and surface effectiveness using PIV and PSP Journal of Turbomachinery. 133. DOI: 10.1115/1.4003051 |
0.348 |
|
2011 |
Wright LM, McClain ST, Clemenson MD. Effect of density ratio on flat plate film cooling with shaped holes using PSP Journal of Turbomachinery. 133. DOI: 10.1115/1.4002988 |
0.391 |
|
2009 |
Wright LM, Gohardani AS. Effect of the coolant ejection in rectangular and trapezoidal trailing-edge cooling passages Journal of Thermophysics and Heat Transfer. 23: 316-326. DOI: 10.2514/1.38426 |
0.653 |
|
2009 |
Liu YH, Huh M, Wright LM, Han JC. Heat transfer in trailing-edge channels with slot ejection under high rotation numbers Journal of Thermophysics and Heat Transfer. 23: 305-315. DOI: 10.2514/1.37982 |
0.74 |
|
2009 |
Wright LM, Gohardani AS. Effect of turbulator width and spacing on the thermal performance of angled ribs in a rectangular channel (AR = 3:1) Asme International Mechanical Engineering Congress and Exposition, Proceedings. 10: 1103-1113. DOI: 10.1115/IMECE2008-66842 |
0.43 |
|
2009 |
Russin RA, Alfred D, Wright LM. Measurement of detailed heat transfer coefficient and film cooling effectiveness distributions using PSP and TSP Proceedings of the Asme Turbo Expo. 3: 807-817. DOI: 10.1115/GT2009-59975 |
0.383 |
|
2009 |
Wright LM, Blake SA, Rhee DH, Han JC. Effect of upstream wake with vortex on turbine blade platform film cooling with simulated stator-rotor purge flow Journal of Turbomachinery. 131. DOI: 10.1115/1.2952365 |
0.482 |
|
2008 |
Liu YH, Huh M, Wright LM, Han JC. Heat transfer in trailing edge, wedge shaped cooling channels with slot ejection under high rotation numbers Proceedings of the Asme Turbo Expo. 4: 311-320. DOI: 10.1115/GT2008-50343 |
0.728 |
|
2008 |
Wright LM, Gao Z, Yang H, Han JC. Film cooling effectiveness distribution on a gas turbine blade platform with inclined slot leakage and discrete film hole flows Journal of Heat Transfer. 130. DOI: 10.1115/1.2907440 |
0.458 |
|
2008 |
Wright LM, Liu YH, Han JC, Chopra S. Heat transfer in trailing edge, wedge-shaped cooling channels under high rotation numbers Journal of Heat Transfer. 130. DOI: 10.1115/1.2907437 |
0.714 |
|
2008 |
Wright LM, Blake SA, Han JC. Film cooling effectiveness distributions on a turbine blade cascade platform with stator-rotor purge and discrete film hole flows Journal of Turbomachinery. 130. DOI: 10.1115/1.2777186 |
0.467 |
|
2007 |
Wright LM, Blake S, Han JC. Effectiveness distributions on turbine-blade cascade platforms through simulated stator-rotor seals Journal of Thermophysics and Heat Transfer. 21: 754-762. DOI: 10.2514/1.30382 |
0.497 |
|
2007 |
Liu YH, Wright LM, Fu WL, Han JC. Rib spacing effect on heat transfer in rotating two-pass ribbed channel (AR = 1:2) Journal of Thermophysics and Heat Transfer. 21: 582-595. DOI: 10.2514/1.29128 |
0.743 |
|
2006 |
Fu WL, Wright LM, Han JC. Heat transfer in two-pass rotating rectangular channels (AR = 2:1) with discrete ribs Journal of Thermophysics and Heat Transfer. 20: 569-582. DOI: 10.2514/1.19468 |
0.739 |
|
2006 |
Wright LM, Gao Z, Yang H, Han JC. Film cooling effectiveness distribution on a gas turbine blade platform with inclined slot leakage and discrete film hole flows Proceedings of the Asme Turbo Expo. 3: 383-394. DOI: 10.1115/GT2006-90375 |
0.327 |
|
2006 |
Liu YH, Wright LM, Fu WL, Han JC. Rib spacing effect on heat transfer and pressure loss in a rotating two-pass rectangular channel (AR=1:2) with 45-degree angled ribs Proceedings of the Asme Turbo Expo. 3: 363-373. DOI: 10.1115/GT2006-90368 |
0.551 |
|
2006 |
Fu WL, Wright LM, Han JC. Rotational buoyancy effects on heat transfer in five different aspect-ratio rectangular channels with smooth walls and 45 degree ribbed walls Journal of Heat Transfer. 128: 1130-1141. DOI: 10.1115/1.2352782 |
0.725 |
|
2005 |
Fu WL, Wright LM, Han JC. Buoyancy effects on heat transfer in five different aspect-ratio rectangular channels with smooth walls and 45-degree ribbed walls Proceedings of the Asme Turbo Expo. 3: 453-463. DOI: 10.1115/GT2005-68493 |
0.557 |
|
2005 |
Wright LM, Fu WL, Han JC. Influence of entrance geometry on heat transfer in rotating rectangular cooling channels (AR=4:1) with angled ribs Journal of Heat Transfer. 127: 378-387. DOI: 10.1115/1.1860564 |
0.753 |
|
2005 |
Fu WL, Wright LM, Han JC. Heat transfer in two-pass rotating rectangular channels (AR=1:2 and AR=1:4) with smooth walls Journal of Heat Transfer. 127: 265-277. DOI: 10.1115/1.1857946 |
0.709 |
|
2005 |
Fu WL, Wright LM, Han JC. Heat transfer in two-pass rotating rectangular channels (AR=1:2 and AR=1:4) with 45 deg angled rib turbulators Journal of Turbomachinery. 127: 164-174. DOI: 10.1115/1.1791649 |
0.746 |
|
2005 |
Lee E, Wright LM, Han JC. Heat transfer in rotating rectangular channels with V-shaped and angled ribs Journal of Thermophysics and Heat Transfer. 19: 48-56. |
0.601 |
|
2004 |
Wright LM, Lee E, Han J. Effect of rotation on heat transfer in rectangular channels with pin fins Journal of Thermophysics and Heat Transfer. 18: 263-272. DOI: 10.2514/1.4723 |
0.645 |
|
2004 |
Fu WL, Wright LM, Han JC. Heat transfer in two-pass rotating rectangular channels (AR=2:1) with discrete V-shaped and discrete angled rib turbulators American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 375: 545-554. DOI: 10.1115/IMECE2004-59563 |
0.611 |
|
2004 |
Wright LM, Fu WL, Han JC. Thermal performance of angled, V-shaped, and W-shaped rib turbulators in rotating rectangular cooling channels (AR=4:1) Journal of Turbomachinery. 126: 604-614. DOI: 10.1115/1.1791286 |
0.744 |
|
2004 |
Wright LM, Lee E, Han JC. Effect of rotation on heat transfer in rectangular channels with pin fins Journal of Thermophysics and Heat Transfer. 18: 263-272. |
0.603 |
|
2004 |
Wright LM, Fu WL, Han JC. Thermal performance of angled, V-shaped, and W-shaped rib turbulators in rotating rectangular cooling channels (AR = 4:1) Proceedings of the Asme Turbo Expo 2004. 3: 885-894. |
0.497 |
|
2004 |
Fu WL, Wright LM, Han JC. Heat transfer in two-pass rotating rectangular channels (AR=1:2 and AR=1:4) with 45° angled rib turbulators Proceedings of the Asme Turbo Expo 2004. 3: 305-315. |
0.572 |
|
2003 |
Wright LM, Lee E, Man JC. Influence of entrance geometry on heat transfer in narrow rectangular cooling channels (AR = 4:1) with angled ribs American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 374: 119-129. DOI: 10.1115/IMECE2003-42572 |
0.591 |
|
2003 |
Lee E, Wright LM, Han JC. Heat transfer in rotating rectangular channels (AR = 4:1) with V-shaped and angled rib turbulators with and without gaps American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) Igti. 5: 661-670. DOI: 10.1115/GT2003-38900 |
0.617 |
|
2003 |
Wright LM, Lee E, Han JC. Effect of rotation on heat transfer in narrow rectangular cooling channels (AR = 8:1 and 4:1) with pin-fins American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) Igti. 5: 213-223. DOI: 10.1115/GT2003-38340 |
0.603 |
|
Show low-probability matches. |