| Year |
Citation |
Score |
| 2020 |
Chen RHC, Wislet-Gendebien S, Samuel F, Visanji NP, Zhang G, Marsilio D, Langman T, Fraser PE, Tandon A. Correction: α-Synuclein membrane association is regulated by the Rab3a recycling machinery and presynaptic activity. The Journal of Biological Chemistry. 295: 14248. PMID 33037082 DOI: 10.1074/jbc.AAC120.015921 |
0.486 |
|
| 2015 |
Samuel F, Flavin WP, Iqbal S, Pacelli C, Sri Renganathan SD, Trudeau LE, Campbell EM, Fraser PE, Tandon A. Effects of Serine 129 phosphorylation on α-synuclein aggregation, membrane association, and internalization. The Journal of Biological Chemistry. PMID 26719332 DOI: 10.1074/Jbc.M115.705095 |
0.486 |
|
| 2015 |
Reddy JM, Samuel FG, McConnell JA, Reddy CP, Beck BW, Hynds DL. Non-prenylatable, cytosolic Rac1 alters neurite outgrowth while retaining the ability to be activated. Cellular Signalling. 27: 630-7. PMID 25479592 DOI: 10.1016/J.Cellsig.2014.11.033 |
0.621 |
|
| 2014 |
Samuel F, Reddy J, Kaimal R, Segovia V, Mo H, Hynds DL. Inhibiting geranylgeranylation increases neurite branching and differentially activates cofilin in cell bodies and growth cones. Molecular Neurobiology. 50: 49-59. PMID 24515839 DOI: 10.1007/S12035-014-8653-5 |
0.605 |
|
| 2013 |
Chen RH, Wislet-Gendebien S, Samuel F, Visanji NP, Zhang G, Marsilio D, Langman T, Fraser PE, Tandon A. α-Synuclein membrane association is regulated by the Rab3a recycling machinery and presynaptic activity. The Journal of Biological Chemistry. 288: 7438-49. PMID 23344955 DOI: 10.1074/Jbc.M112.439497 |
0.528 |
|
| 2012 |
Fauvet B, Fares MB, Samuel F, Dikiy I, Tandon A, Eliezer D, Lashuel HA. Characterization of semisynthetic and naturally Nα-acetylated α-synuclein in vitro and in intact cells: implications for aggregation and cellular properties of α-synuclein. The Journal of Biological Chemistry. 287: 28243-62. PMID 22718772 DOI: 10.1074/Jbc.M112.383711 |
0.483 |
|
| 2010 |
Samuel F, Hynds DL. RHO GTPase signaling for axon extension: is prenylation important? Molecular Neurobiology. 42: 133-42. PMID 20878268 DOI: 10.1007/S12035-010-8144-2 |
0.62 |
|
| Low-probability matches (unlikely to be authored by this person) |
| 1996 |
Roy N, Samuel AM, Samuel FH. Porosity formation in AI-9 Wt Pet Si-3 Wt Pet Cu alloy systems: Metallographic observations Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 27: 415-429. |
0.163 |
|
| 2006 |
Khalifa W, Samuel AM, Samuel FH, Doty HW, Valtierra S. Metallographic observations of β-AlFeSi phase and its role in porosity formation in Al-7%Si alloys International Journal of Cast Metals Research. 19: 156-166. DOI: 10.1179/136404606225023372 |
0.132 |
|
| 2003 |
Samuel FH, Samuel AM, Doty HW, Valtierra S. Influence of composition, Sr modification, and annealing treatment on the structure and properties of cast Al-4 Pct Mg alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 34: 115-129. |
0.131 |
|
| 1999 |
Ouellet P, Samuel FH. Effect of Mg on the ageing behaviour of Al-Si-Cu 319 type aluminium casting alloys Journal of Materials Science. 34: 4671-4697. DOI: 10.1023/A:1004645928886 |
0.131 |
|
| 2014 |
Samuel AM, Doty HW, Valtierra S, Samuel FH. Relationship between tensile and impact properties in Al-Si-Cu-Mg cast alloys and their fracture mechanisms Materials and Design. 53: 938-946. DOI: 10.1016/J.Matdes.2013.07.021 |
0.127 |
|
| 2009 |
Mohamed AMA, Samuel AM, Samuel FH, Doty HW. Influence of additives on the microstructure and tensile properties of near-eutectic Al-10.8%Si cast alloy Materials and Design. 30: 3943-3957. DOI: 10.1016/J.Matdes.2009.05.042 |
0.127 |
|
| 1999 |
Villeneuve C, Samuel FH. Fragmentation and dissolution of β-Al5FeSi phase during solution heat treatment of Al-13 wt% Si-Fe alloys International Journal of Cast Metals Research. 12: 145-160. |
0.125 |
|
| 1995 |
Samuel AM, Samuel FH. Effect of melt treatment, solidification conditions and porosity level on the tensile properties of 319.2 endchill aluminium castings Journal of Materials Science. 30: 4823-4833. DOI: 10.1007/Bf01154490 |
0.124 |
|
| 2008 |
Han YM, Samuel AM, Samuel FH, Doty HW. Dissolution of Al2Cu phase in non-modified and Sr modified 319 type alloys International Journal of Cast Metals Research. 21: 387-393. DOI: 10.1179/136404608X347662 |
0.123 |
|
| 2009 |
Mohamed AMA, Samuel FH, Samuel AM, Doty HW. Influence of additives on the impact toughness of Al-10.8% Si near-eutectic cast alloys Materials and Design. 30: 4218-4229. DOI: 10.1016/J.Matdes.2009.04.041 |
0.121 |
|
| 1995 |
Samuel FH, Samuel AM, Liu H. Effect of magnesium content on the ageing behaviour of water-chilled Al-Si-Cu-Mg-Fe-Mn (380) alloy castings Journal of Materials Science. 30: 2531-2540. DOI: 10.1007/Bf00362130 |
0.121 |
|
| 2016 |
Samuel AM, Doty HW, Gallardo SV, Samuel FH. The effect of Bi-Sr and Ca-Sr interactions on the microstructure and tensile properties of Al-Si-based alloys Materials. 9. DOI: 10.3390/ma9030126 |
0.121 |
|
| 2013 |
Samuel AM, Doty HW, Valtierra S, Samuel FH. Defects related to incipient melting in Al-Si-Cu-Mg alloys Materials and Design. 52: 947-956. DOI: 10.1016/J.Matdes.2013.05.048 |
0.12 |
|
| 2009 |
Elgallad E, Samuel F, Samuel A, Doty H. Development of new Al-Cu based alloys aimed at improving the machinability of automotive castings International Journal of Metalcasting. 3: 29-41. |
0.12 |
|
| 2014 |
Samuel AM, Doty HW, Valtierra S, Samuel FH. Effect of grain refining and Sr-modification interactions on the impact toughness of Al-Si-Mg cast alloys Materials and Design. 56: 264-273. DOI: 10.1016/J.Matdes.2013.10.029 |
0.119 |
|
| 2015 |
Samuel AM, Alkahtani SA, Doty HW, Samuel FH. Role of Zr and Sc addition in controlling the microstructure and tensile properties of aluminum-copper based alloys Materials and Design. 88: 1134-1144. DOI: 10.1016/J.Matdes.2015.09.090 |
0.118 |
|
| 2012 |
Zedan Y, Samuel AM, Samuel FH, Alkahtani S. Effects of Cu, Mg, and Sr Additions on the Mechanical Properties and Machinability of Near-Eutectic Al-11%S Casting Alloys Light Metals 2012. 319-326. DOI: 10.1002/9781118359259.ch54 |
0.118 |
|
| 2009 |
Mohamed AMA, Samuel FH, Samuel AM, Doty HW. Effects of individual and combined additions of Pb, Bi, and Sn on the microstructure and mechanical properties of Al-10.8Si-2.25Cu-0.3Mg alloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 40: 240-254. DOI: 10.1007/S11661-008-9692-1 |
0.118 |
|
| 2003 |
Liu L, Samuel AM, Samuel FH, Doty HW, Valtierra S. Influence of oxides on porosity formation in Sr-treated Al-Si casting alloys Journal of Materials Science. 38: 1255-1267. DOI: 10.1023/A:1022870006721 |
0.118 |
|
| 1995 |
Samuel AM, Samuel FH. A metallographic study of porosity and fracture behavior in relation to the tensile properties in 319.2 end chill castings Metallurgical and Materials Transactions A. 26: 2359-2372. DOI: 10.1007/BF02671250 |
0.118 |
|
| 1987 |
Samuel FH, Champier G. Ageing characteristics of Al-2.5% Li rapidly solidified alloy Journal of Materials Science. 22: 3851-3863. DOI: 10.1007/BF01133332 |
0.117 |
|
| 2014 |
Zedan Y, Alkahtani SA, Samuel FH. Effects of Alloying Elements on the Machinability of Near-Eutectic Al-Si Casting Alloys Machinability of Advanced Materials. 119-144. DOI: 10.1002/9781118576854.ch4 |
0.116 |
|
| 2003 |
Liu L, Samuel AM, Samuel FH, Doty HW, Valtierra S. Role of iron in relation to silicon modification in Sr-treated 319 and 356 alloys International Journal of Cast Metals Research. 16: 397-408. |
0.116 |
|
| 2014 |
Samuel AM, Doty HW, Valtierra S, Samuel FH. Effect of melt treatment on impact toughness of 356 type alloys International Journal of Cast Metals Research. 27: 101-106. DOI: 10.1179/1743133613Y.0000000084 |
0.116 |
|
| 2008 |
Han YM, Samuel AM, Samuel FH, Doty HW. Microstructure characteristics in non-modified and Sr modified Al-Si-Cu-Mg 319 type alloys International Journal of Cast Metals Research. 21: 371-380. DOI: 10.1179/136404608X343639 |
0.116 |
|
| 2011 |
Elsebaie O, Samuel AM, Samuel FH. Effects of Sr-modification, iron-based intermetallics and aging treatment on the impact toughness of 356 Al-Si-Mg alloy Journal of Materials Science. 46: 3027-3045. DOI: 10.1007/S10853-010-5181-1 |
0.115 |
|
| 2016 |
Nabawy AM, Samuel AM, Alkahtani SA, Abuhasel KA, Samuel FH. Role of cerium, lanthanum, and strontium additions in an Al - Si - Mg (A356) alloy International Journal of Materials Research. 107: 446-458. DOI: 10.3139/146.111360 |
0.115 |
|
| 1998 |
Samuel FH, Ouellet P, Samuel AM, Doty HW. Effect of Mg and Sr additions on the formation of intermetallics in AI-6 Wt Pet Si-3.5 Wt Pet Cu-(0.45) to (0.8) Wt Pet Fe 319-Type Alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 29: 2871-2884. |
0.115 |
|
| 2016 |
Samuel AM, Elgallad EM, Doty HW, Valtierra S, Samuel FH. Effect of metallurgical parameters on the microstructure, hardness impact properties, and fractography of Al-(6.5-11.5) wt% Si based alloys Materials and Design. 107: 426-439. DOI: 10.1016/J.Matdes.2016.06.051 |
0.114 |
|
| 1994 |
Samuel AM, Samuel FH. Influence of casting and heat treatment parameters in controlling the properties of an Al-10 wt% Si-0.6 wt% Mg/SiC/20p composite Journal of Materials Science. 29: 3591-3600. DOI: 10.1007/Bf00357323 |
0.114 |
|
| 1996 |
De La Sablonnière H, Samuel FH. Solution heat treatment of 319 aluminium alloy containing ∼0.5wt% Mg. Part 1 - Solidification and tensile properties International Journal of Cast Metals Research. 9: 195-211. |
0.113 |
|
| 1997 |
Samuel AM, Samuel FH. Modification of iron intermetallics by magnesium and strontium in Al-Si alloys International Journal of Cast Metals Research. 10: 147-157. |
0.113 |
|
| 2003 |
Li Z, Samuel AM, Samuel FH, Ravindran C, Valtierra S. Effect of alloying elements on the segregation and dissolution of CuAl2 phase in Al-Si-Cu 319 alloys Journal of Materials Science. 38: 1203-1218. DOI: 10.1023/A:1022857703995 |
0.111 |
|
| 2015 |
Zaki GA, Samuel AM, Doty HW, Samuel FH. Microstructural evolution during solidification of Al-Cu-based alloys International Journal of Materials Research. 106: 1144-1153. DOI: 10.3139/146.111288 |
0.111 |
|
| 2014 |
Hernandez-Sandoval J, Samuel AM, Valtierra S, Samuel FH. Ni- and Zr-Based Intermetallics in Al–Si–Cu–Mg Cast Alloys Metallography, Microstructure, and Analysis. 3: 408-420. DOI: 10.1007/S13632-014-0164-2 |
0.11 |
|
| 2016 |
Ibrahim MF, Garza-Elizondo GH, Samuel AM, Samuel FH. Optimizing the heat treatment of high-strength 7075-type wrought alloys: A metallographic study International Journal of Metalcasting. 10: 264-275. DOI: 10.1007/S40962-016-0038-2 |
0.109 |
|
| 2003 |
Saoudi A, Samuel FH, Samuel AM, Doty HW. The effect of rare earth metal additions and superheat on the microstructure and mechanical properties of the A319 aluminium alloy Revue De Metallurgie. Cahiers D'Informations Techniques. 100. |
0.107 |
|
| 1986 |
Samuel FH. A study of the microstructure, mechanical properties and failure behaviour of Al-Li-Co melt-spun ribbons: effect of Al9Co2 phase particle precipitation Journal of Materials Science. 21: 3097-3107. DOI: 10.1007/BF00553342 |
0.107 |
|
| 1995 |
Samuel AM, Samuel FH. Effect of alloying elements and dendrite arm spacing on the microstructure and hardness of an Al-Si-Cu-Mg-Fe-Mn (380) aluminium die-casting alloy Journal of Materials Science. 30: 1698-1708. DOI: 10.1007/Bf00351598 |
0.107 |
|
| 2010 |
Elsharkawi EA, Samuel E, Samuel AM, Samuel FH. Effects of Mg, Fe, Be additions and solution heat treatment on the π-AlMgFeSi iron intermetallic phase in Al-7Si-Mg alloys Journal of Materials Science. 45: 1528-1539. DOI: 10.1007/S10853-009-4118-Z |
0.106 |
|
| 2008 |
El Sebaie O, Samuel AM, Samuel FH, Doty HW. The effects of mischmetal, cooling rate and heat treatment on the hardness of A319.1, A356.2 and A413.1 Al-Si casting alloys Materials Science and Engineering A. 486: 241-252. DOI: 10.1016/J.Msea.2007.09.011 |
0.105 |
|
| 2016 |
Hernandez-Sandoval J, Samuel AM, Samuel FH, Valtierra S. Effect of additions of sic and Al2O3 particulates on the microstructure and tensile properties of al-si-cu-mg cast alloys International Journal of Metalcasting. 10: 253-263. DOI: 10.1007/S40962-016-0035-5 |
0.105 |
|
| 1997 |
Liu L, Samuel FH. Assessment of melt cleanliness in A356.2 aluminium casting alloy using the porous disc filtration apparatus technique: Part I Inclusion measurements Journal of Materials Science. 32: 5901-5925. |
0.104 |
|
| 2008 |
Ma Z, Samuel AM, Samuel FH, Doty HW, Valtierra S. A study of tensile properties in Al-Si-Cu and Al-Si-Mg alloys: Effect of β-iron intermetallics and porosity Materials Science and Engineering A. 490: 36-51. DOI: 10.1016/J.Msea.2008.01.028 |
0.103 |
|
| 1986 |
Champier G, Samuel FH. MICROSTRUCTURES OF Al-Li-Si ALLOYS RAPIDLY SOLIDIFIED . 131-136. |
0.103 |
|
| 2014 |
Han Y, Samuel AM, Doty HW, Valtierra S, Samuel FH. Optimizing the tensile properties of Al-Si-Cu-Mg 319-type alloys: Role of solution heat treatment Materials and Design. 58: 426-438. DOI: 10.1016/J.Matdes.2014.01.060 |
0.102 |
|
| 2014 |
Ibrahim MF, Samuel AM, Samuel FH. A preliminary study on optimizing the heat treatment of high strength Al-Cu-Mg-Zn alloys Materials and Design. 57: 342-350. DOI: 10.1016/J.Matdes.2013.11.078 |
0.102 |
|
| 2013 |
Ibrahim MF, Samuel AM, Alkahtani SA, Samuel FH. A novel solution heat treatment of 7075-type alloy Tms Light Metals. 383-390. |
0.101 |
|
| 2011 |
Samuel E, Jonas JJ, Samuel FH. Serrated flow and enhanced ductility in coarse-grained Al-Mg alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 1028-1037. DOI: 10.1007/S11661-010-0506-X |
0.101 |
|
| 1992 |
Todeschini P, Champier G, Samuel FH. Production of Al-(12-25) wt% Si alloys by rapid solidification: melt spinning versus centrifugal atomization Journal of Materials Science. 27: 3539-3551. DOI: 10.1007/BF01151831 |
0.101 |
|
| 1996 |
De La Sablonnière H, Samuel FH. Solution heat treatment of 319 aluminium alloy containing ∼0.5 wt% Mg. Part 2 - Microstructure and fractography International Journal of Cast Metals Research. 9: 213-225. |
0.101 |
|
| 2010 |
Elgallad EM, Samuel FH, Samuel AM, Doty HW. Machinability aspects of new Al-Cu alloys intended for automotive castings Journal of Materials Processing Technology. 210: 1754-1766. DOI: 10.1016/J.Jmatprotec.2010.06.006 |
0.101 |
|
| 2013 |
Nabawy AM, Samuel AM, Samuel FH, Doty HW. Effects of grain refiner additions (Zr, Ti-B) and of mould variables on hot tearing susceptibility of recently developed Al-2 wt-%Cu alloy International Journal of Cast Metals Research. 26: 308-317. DOI: 10.1179/1743133613Y.0000000068 |
0.101 |
|
| 1988 |
Samuel FH. Characterization of a CrMoB high strength, low alloy steel: Relationship between the microstructure and mechanical properties Materials Science and Engineering. 102: 259-269. DOI: 10.1016/0025-5416(88)90581-2 |
0.101 |
|
| 2014 |
Ma Z, Samuel AM, Doty HW, Valtierra S, Samuel FH. Effect of Fe content on the fracture behaviour of Al-Si-Cu cast alloys Materials and Design. 57: 366-373. DOI: 10.1016/J.Matdes.2014.01.037 |
0.1 |
|
| 1993 |
Samuel AM, Liu H, Samuel FH. Effect of melt, solidification and heat-treatment processing parameters on the properties of Al-Si-Mg/SiC(p) composites Journal of Materials Science. 28: 6785-6798. DOI: 10.1007/Bf00356432 |
0.099 |
|
| 1998 |
Samuel FH. Incipient melting of Al5Mg8Si6Cu2 and Al2Cu intermetallics in unmodified and strontium-modified Al-Si-Cu-Mg (319) alloys during solution heat treatment Journal of Materials Science. 33: 2283-2297. |
0.098 |
|
| 2007 |
Mohamed AM, Samuel FH, Samuel AM, Doty H, Valtierra S. Application of experimental design to study and control properties and behaviour of cast Al-10·8Si eutectic alloy International Journal of Cast Metals Research. 20: 246-253. DOI: 10.1179/136404607X268229 |
0.098 |
|
| 2008 |
Ammar HR, Samuel AM, Samuel FH. Porosity and the fatigue behavior of hypoeutectic and hypereutectic aluminum-silicon casting alloys International Journal of Fatigue. 30: 1024-1035. DOI: 10.1016/J.Ijfatigue.2007.08.012 |
0.097 |
|
| 2010 |
Zedan Y, Samuel FH, Samuel AM, Doty HW. Effects of Fe intermetallics on the machinability of heat-treated Al-(7-11)% Si alloys Journal of Materials Processing Technology. 210: 245-257. DOI: 10.1016/J.Jmatprotec.2009.09.007 |
0.097 |
|
| 1985 |
Samuel FH. Effect of dual-phase treatment and tempering on the microstructure and mechanical properties of a high strength, low alloy steel Materials Science and Engineering. 75: 51-66. DOI: 10.1016/0025-5416(85)90177-6 |
0.097 |
|
| 2013 |
Samuel AM, Doty HW, Valtierra S, Samuel FH. Effect of Mg addition of microstructure of 319 type alloys International Journal of Cast Metals Research. 26: 354-363. DOI: 10.1179/1743133613Y.0000000071 |
0.097 |
|
| 1992 |
Samuel AM, Samuel FH. Various aspects involved in the production of low-hydrogen aluminium castings Journal of Materials Science. 27: 6533-6563. DOI: 10.1007/Bf01165936 |
0.096 |
|
| 2014 |
Golbahar B, Samuel E, Samuel AM, Doty HW, Samuel FH. On thermal analysis, macrostructure and microstructure of grain refined al–si–mg cast alloys: Role of sr addition International Journal of Cast Metals Research. 27: 257-266. DOI: 10.1179/1743133614Y.0000000109 |
0.095 |
|
| 1994 |
Samuel FH, Samuel AM. Effect of heat treatment on the microstructure, tensile properties, and fracture behavior of permanent mold Al-10 wt pct Si-0.6 wt pct Mg/SiC/10p composite castings Metallurgical and Materials Transactions A. 25: 2247-2263. DOI: 10.1007/BF02652325 |
0.095 |
|
| 1987 |
Samuel FH, Daniel D, Sudre O. Further investigations on the microstructure and mechanical behaviour of granular bainite in a high strength, low alloy steel: Comparison of ferrite-pearlite and ferrite-martensite microstructures Materials Science and Engineering. 92: 43-62. DOI: 10.1016/0025-5416(87)90155-8 |
0.095 |
|
| 2014 |
Garza-Elizondo GH, Alkahtani SA, Samuel AM, Samuel FH. Role of Ni and Zr in Preserving the Strength of 354 Aluminum Alloy at High Temperature Light Metals 2014. 303-314. DOI: 10.1002/9781118888438.ch52 |
0.094 |
|
| 1988 |
Samuel FH, Champier G. Effect of silicon, magnesium, cobalt and iron additions on the microstructure of Al-Li centrifugally atomized powders Journal of Materials Science. 23: 541-546. DOI: 10.1007/BF01174682 |
0.094 |
|
| 1994 |
Gowri S, Samuel FH. Effect of alloying elements on the solidification characteristics and microstructure of Al- Si- Cu- Mg- Fe 380 alloy Metallurgical and Materials Transactions A. 25: 437-448. DOI: 10.1007/BF02647989 |
0.094 |
|
| 2008 |
Sebaie OE, Samuel AM, Samuel FH, Doty HW. The effects of mischmetal, cooling rate and heat treatment on the eutectic Si particle characteristics of A319.1, A356.2 and A413.1 Al-Si casting alloys Materials Science and Engineering A. 480: 342-355. DOI: 10.1016/J.Msea.2007.07.039 |
0.094 |
|
| 2012 |
Nabawy AM, Samuel AM, Samuel FH, Doty HW. Influence of additions of Zr, Ti-B, Sr, and Si as well as of mold temperature on the hot-tearing susceptibility of an experimental Al-2% Cu-1% Si alloy Journal of Materials Science. 47: 4146-4158. DOI: 10.1007/S10853-012-6269-6 |
0.094 |
|
| 1996 |
Samuel AM, Samuel FH, Doty HW. Observations on the formation of β-Al5FeSi phase in 319 type Al-Si alloys Journal of Materials Science. 31: 5529-5539. |
0.093 |
|
| 2003 |
Li Z, Samuel AM, Samuel FH. Role of P and Fe on the precipitation of copper intermetallics in 319 alloys Journal of Materials Science Letters. 22: 585-587. DOI: 10.1023/A:1023342227912 |
0.093 |
|
| 1996 |
Samuel AM, Gauthier J, Samuel FH. Microstructural aspects.of the dissolution and melting of Al2Cu phase in Al-Si alloys during solution heat treatment Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 27: 1785-1798. |
0.092 |
|
| 1995 |
Samuel FH, Samuel AM. Heat-treatment parameters for a 359/Al2O3/10p composite modified with 0.07 wt% strontium Composites Science and Technology. 53: 85-98. DOI: 10.1016/0266-3538(94)00073-5 |
0.091 |
|
| 2008 |
Ammar HR, Samuel AM, Samuel FH. Effects of surface porosity on the fatigue strength of AE425 and PM390 hypereutectic Al-Si casting alloys at medium and elevated temperatures Materials Science and Engineering A. 473: 58-64. DOI: 10.1016/J.Msea.2007.03.111 |
0.091 |
|
| 2006 |
Samuel E, Jonas JJ, Samuel FH, MacEwen SR. Superplasticity in coarse-grained Al-Mg alloys Materials Science Forum. 519: 1285-1290. |
0.091 |
|
| 2015 |
Samuel AM, Alkahtani SA, Abuhasel K, Samuel FH. Role of solidification conditions in determining the microstructure of Al-Si cast alloys Tms Light Metals. 2015: 289-296. |
0.091 |
|
| 1995 |
Samuel AM, Samuel FH. Foundry aspects of particulate reinforced aluminum MMCs: factors controlling composite quality Key Engineering Materials. 104: 65-98. |
0.09 |
|
| 2014 |
Elsebaie O, Samuel AM, Samuel FH, Doty HW. Impact toughness of Al-Si-Cu-Mg-Fe cast alloys: Effects of minor additives and aging conditions Materials and Design. 60: 496-509. DOI: 10.1016/j.matdes.2014.04.031 |
0.09 |
|
| 1983 |
Samuel FH. CRYSTALLOGRAPHIC STUDY OF PEARLITE GROWTH IN STEELS Transactions of the Iron and Steel Institute of Japan. 23: 403-409. |
0.09 |
|
| 1983 |
Samuel FH, Hussein AA. CRYSTALLOGRAPHIC STUDY OF NUCLEATION OF PEARLITE Transactions of the Iron and Steel Institute of Japan. 23: 65-70. |
0.089 |
|
| 1992 |
Gowri S, Samuel FH. Effect of cooling rate on the solidification behavior of Al-7 Pct Si-SiCp metal-matrix composites Metallurgical Transactions A. 23: 3369-3376. DOI: 10.1007/BF02663446 |
0.085 |
|
| 1982 |
Sarma DS, Samuel FH. ON THE FORMATION OF GRANULAR BAINITE AND THE MARTENSITE-AUSTENITE CONSTITUENT IN LOW ALLOY STEELS . 1035-1039. |
0.085 |
|
| 1987 |
Samuel FH. Further investigations on martensites in Fe-0.5 wt% C and Fe-0.5wt% C-24 wt% Ni melt spun ribbons Journal of Materials Science. 22: 3885-3892. DOI: 10.1007/BF01133336 |
0.084 |
|
| 1995 |
Samuel AM, Samuel FH. Analysis of the tensile properties and fractography of as-cast and heat treated 359-SiC-20p composite Journal of Materials Science. 30: 3098-3110. DOI: 10.1007/Bf01209223 |
0.084 |
|
| 1993 |
Samuel AM, Liu H, Samuel FH. On the castability of Al-Si/SiC particle-reinforced metal-matrix composites: Factors affecting fluidity and soundness Composites Science and Technology. 49: 1-12. DOI: 10.1016/0266-3538(93)90016-A |
0.083 |
|
| 1986 |
Samuel FH. MICROSTRUCTURAL CHARACTERIZATION OF RAPIDLY SOLIDIFIED Al-Li-Co POWDERS . 105-111. DOI: 10.1007/BF02644444 |
0.083 |
|
| 1986 |
Samuel FH, Samuel AM, de Jonckere A, Gerin F. On the microstructure of rapidly solidified Al-15 wt pct mn ribbons: effect of annealing in the temperature range 300° to 600 °C Metallurgical and Materials Transactions A. 17: 1671-1683. DOI: 10.1007/BF02817266 |
0.083 |
|
| 2008 |
Ammar HR, Samuel AM, Samuel FH. Effect of casting imperfections on the fatigue life of 319-F and A356-T6 Al-Si casting alloys Materials Science and Engineering A. 473: 65-75. DOI: 10.1016/J.Msea.2007.03.112 |
0.082 |
|
| 2013 |
Sowemimo A, Samuel F, Fageyinbo MS. Anti-inflammatory activity of Markhamia tomentosa (Benth.) K. Schum. Ex Engl. ethanolic leaf extract Journal of Ethnopharmacology. 149: 191-194. PMID 23792584 DOI: 10.1016/j.jep.2013.06.020 |
0.082 |
|
| 2013 |
Samuel FO, Segun A, Baba MM. Oil of C. sinensis inhibits pathogenic bacteria International Journal of Phytomedicine. 5: 26-35. |
0.082 |
|
| 1983 |
Samuel FH, Hussein AA. MICROSTRUCTURE AND MECHANICAL PROPERTIES OF A QUENCHED AND TEMPERED Cr-V DUAL-PHASE STEEL Transactions of the Iron and Steel Institute of Japan. 23: 213-217. |
0.081 |
|
| 1995 |
Lee FT, Major JF, Samuel FH. FRACTURE BEHAVIOUR OF Al12wt.%Si0.35wt.%Mg(0–0.02)wt.%Sr CASTING ALLOYS UNDER FATIGUE TESTING Fatigue &Amp; Fracture of Engineering Materials &Amp; Structures. 18: 385-396. DOI: 10.1111/j.1460-2695.1995.tb00885.x |
0.079 |
|
| 1998 |
Liu L, Samuel FH. Effect of inclusions on the tensile properties of Al-7% Si-0.35% Mg (A356.2) aluminium casting alloy Journal of Materials Science. 33: 2269-2281. |
0.078 |
|
| 2001 |
Samuel FH, Samuel AM, Doty HW, Valtierra S. Decomposition of Fe-intermetallics in Sr-modified cast 6XXX type aluminum alloys for automotive skin Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 32: 2061-2075. |
0.078 |
|
| 1983 |
Samuel FH, Hussein AA. A comparative study of tempering in steel Materials Science and Engineering. 58: 113-120. DOI: 10.1016/0025-5416(83)90142-8 |
0.078 |
|
| 1982 |
Samuel FH, Sarma DS. DEFORMATION OF PLATE MARTENSITE IN Fe-Ni AND Fe-Ni-C ALLOYS Metal Science. 16: 171-173. |
0.078 |
|
| 2015 |
Ibrahim MF, Ammar HR, Samuel AM, Soliman MS, Samuel FH. On the impact toughness of Al-15 vol.% B4C metal matrix composites Composites Part B: Engineering. 79: 83-94. DOI: 10.1016/J.Compositesb.2015.04.018 |
0.076 |
|
| 1983 |
Samuel FH. DEFORMATION AND FRACTURE BEHAVIOUR OF A DUAL-PHASE Cr-V STEEL Transactions of the Iron and Steel Institute of Japan. 23: 357-360. |
0.076 |
|
| 1995 |
Lee FT, Major JF, Samuel FH. Effect of silicon particles on the fatigue crack growth characteristics of Al-12 Wt Pct Si-0.35 Wt Pct Mg-(0 to 0.02) Wt Pct Sr casting alloys Metallurgical and Materials Transactions A. 26: 1553-1570. DOI: 10.1007/BF02647606 |
0.076 |
|
| 1986 |
Samuel FH, Samuel AM, de Jonckere A, Gerin F. ON THE MICROSTRUCTURE OF RAPIDLY SOLIDIFIED Al-15 Wt PCT Mn RIBBONS: EFFECT OF ANNEALING IN THE TEMPERATURE RANGE 300 degree TO 600 degree C Metallurgical Transactions. a, Physical Metallurgy and Materials Science. 17: 1671-1683. |
0.075 |
|
| 1996 |
Samuel FH, Liu H. Fluxing of a 359/SiC/10p composite with alkali chlorides: Effect of inclusions Journal of Materials Science. 31: 43-48. |
0.073 |
|
| 2014 |
Samuel E, Samuel AM, Doty HW, Valtierra S, Samuel FH. Intermetallic phases in Al-Si based cast alloys: New perspective International Journal of Cast Metals Research. 27: 107-114. DOI: 10.1179/1743133613Y.0000000083 |
0.073 |
|
| 1996 |
Roy N, Louchez PR, Samuel FH. Statistical analysis of porosity in Al-9 wt % Si-3 wt % Cu-X alloy systems Journal of Materials Science. 31: 4725-4740. |
0.071 |
|
| 1995 |
Samuel AM, Samuel FH. Relevance of the use of the quality index concept in cast SiCP-reinforced Al-Si-Mg composites Journal of Materials Science. 30: 568-572. DOI: 10.1007/Bf00356312 |
0.07 |
|
| 1987 |
Samuel FH. Tensile stress-strain analysis of dual-phase structures in an MnCrSi steel Materials Science and Engineering. 92. DOI: 10.1016/0025-5416(87)90179-0 |
0.069 |
|
| 1993 |
Samuel FH, Liu H, Samuel AM. Effect of melt cleanliness on the properties Metallurgical Transactions A. 24: 1631-1645. DOI: 10.1007/BF02646602 |
0.067 |
|
| 1982 |
Samuel FH, Hussein AA. Tempering of medium- and high-carbon martensites Metallography. 15: 391-408. DOI: 10.1016/0026-0800(82)90030-1 |
0.067 |
|
| 2013 |
Samuel F, Chowdhury M, Boutaba R. PolyViNE: Policy-based virtual network embedding across multiple domains Journal of Internet Services and Applications. 4: 1-23. DOI: 10.1186/1869-0238-4-6 |
0.065 |
|
| 1987 |
Samuel FH, Samuel AM. Some aspects on the microstructure and crystallization of rapidly solidified Al-27% Mn alloy Journal of Materials Science. 22: 826-834. DOI: 10.1007/BF01103517 |
0.064 |
|
| 1991 |
Samuel FH. Recrystallization behaviour of a CMn steel, a titanium-interstitial-free steel and a niobium-microalloyed steel during strip rolling Materials Science and Engineering A. 142: 95-106. DOI: 10.1016/0921-5093(91)90758-F |
0.064 |
|
| 1987 |
Samuel FH. Effect of strain rate and microstructure on the work hardening of a CrMoSi steel Materials Science and Engineering. 92. DOI: 10.1016/0025-5416(87)90180-7 |
0.063 |
|
| 1995 |
Samuel AM, Gotmare A, Samuel FH. Effect of solidification rate and metal feedability on porosity and SiC Al2O3 particle distribution in an Al-Si-Mg (359) alloy Composites Science and Technology. 53: 301-315. DOI: 10.1016/0266-3538(95)00001-1 |
0.062 |
|
| 1982 |
Samuel FH, Hussein AA. ON THE MICROSTRUCTURE OF QUENCHED, NORMALIZED AND FULL-ANNEALED, COPPER-MODIFIED 4340 STEEL Transactions of the Indian Institute of Metals. 35: 615-623. |
0.061 |
|
| 1984 |
Samuel FH. Interrelations of cooling rate, microstructure, and mechanical properties in four HSLA steels Metallurgical Transactions A. 15: 1807-1817. DOI: 10.1007/BF02664894 |
0.061 |
|
| 1993 |
Liu H, Samuel AM, Samuel FH. Effect of inclusions/oxides on the castability and tensile properties of four SiC particulate Al-Si-Mg composites . 3-15. |
0.061 |
|
| 2004 |
Habibi N, Samuel AM, Samuel FH, Rochette P, Paquint D. Effect of grain refining and Sr modification on prefil measurement sensitivity in 356 alloys using electron probe microanalysis technique International Journal of Cast Metals Research. 17: 79-88. |
0.061 |
|
| 1994 |
Ballot B, Samuel F, Farnoux B. Neutron supermirrors and application to neutron guides Physica B: Physics of Condensed Matter. 198: 220-223. DOI: 10.1016/0921-4526(94)90164-3 |
0.06 |
|
| 1980 |
Samuel FH, Sarma DS. INFLUENCE OF COLD ROLLING ON THE MICROSTRUCTURE AND PROPERTIES OF LATH MARTENSITE IN ALLOY STEELS Metal Science. 14: 101-106. |
0.058 |
|
| 1997 |
Liu L, Samuel FH. Assessment of melt cleanliness in A356.2 aluminium casting alloy using the porous disc filtration apparatus technique: Part II Inclusion analysis Journal of Materials Science. 32: 5927-5944. |
0.056 |
|
| 2016 |
Samuel FP. Existence results for fractional quasilinear integrodifferential equations with impulsive conditions Thai Journal of Mathematics. 14: 167-180. |
0.054 |
|
| 1983 |
Samuel FH. INTERRELATIONS OF MICROSTRUCTURE, MECHANICAL PROPERTIES AND FRACTURE BEHAVIOUR IN A Cr-Mo STEEL Transactions of the Iron and Steel Institute of Japan. 23: 646-651. |
0.053 |
|
| 1984 |
Samuel FE. New HIMA chief favors moratorium on DRG changes to give system a chance to work Federation of American Hospitals Review. 17: 18-20, 22. PMID 10310589 |
0.052 |
|
| 1993 |
Labib A, Liu H, Samuel FH. Effect of solidification rate (0.1-100°C s-1) on the microstructure, mechanical properties and fractography of two AlSi-10vol.%SiC particle composite castings Materials Science and Engineering A. 160: 81-90. DOI: 10.1016/0921-5093(93)90500-E |
0.05 |
|
| 1999 |
Samuel F. Le Corbusier, Teilhard de Chardin and The Planetisation of Mankind' Journal of Architecture. 4: 149-165. DOI: 10.1080/136023699373891 |
0.047 |
|
| 1988 |
Badawy SZA, ElBakry MM, Samuel F, Dizer M. Cumulative pregnancy rates in infertile women with endometriosis Journal of Reproductive Medicine For the Obstetrician and Gynecologist. 33: 757-760. PMID 3172081 |
0.047 |
|
| 2004 |
Samuel F. Niche navigator Timber Harvesting. 52: 8-11. |
0.044 |
|
| 1989 |
Samuel FJ. Construction of neutron guide tubes Proceedings of Spie - the International Society For Optical Engineering. 983: 59-74. DOI: 10.1117/12.948747 |
0.044 |
|
| 2014 |
Both R, Samuel F. Keeping silent about emergency contraceptives in Addis Ababa: A qualitative study among young people, service providers, and key stakeholders Bmc Women's Health. 14. PMID 25370200 DOI: 10.1186/s12905-014-0134-5 |
0.042 |
|
| 2014 |
Samuel F, Dawit H, Ashenef A. Utilization of recently established drug information centers located in the public hospitals of Addis Ababa, Ethiopia: An assessment Therapeutic Innovation and Regulatory Science. 48: 378-385. DOI: 10.1177/2168479013516775 |
0.041 |
|
| 1983 |
Samuel FE. Creating more Medicare providers Contemporary Administrator For Long-Term Care. 6: 36. PMID 10298985 |
0.04 |
|
| 2013 |
Gunasekar T, Samuel FP, Arjunan MM. Existence of solutions for impulsive partial neutral functional evolution integrodifferential inclusions with infinite delay International Journal of Pure and Applied Mathematics. 85: 939-954. DOI: 10.12732/ijpam.v85i5.12 |
0.039 |
|
| 2013 |
Samuel FO. Pattern of Stunting Among Under-Five Children in Selected Urban and Rural Communities in Oyo State, Nigeria Infant, Child, and Adolescent Nutrition. 5: 393-398. DOI: 10.1177/1941406413502526 |
0.039 |
|
| 2013 |
Samuel F, Kerzel D. Judging whether it is aesthetic: Does equilibrium compensate for the lack of symmetry? I-Perception. 4: 57-77. PMID 23799188 DOI: 10.1068/i0557 |
0.039 |
|
| 2009 |
Balachandran K, Samuel FP. Existence of solutions for quasilinear delay integrodifferential equations with nonlocal conditions Electronic Journal of Differential Equations. 2009: 1-7. |
0.038 |
|
| 2011 |
Samuel F, Kerzel D. Is this object balanced or unbalanced? Judgments are on the safe side. Journal of Experimental Psychology. Human Perception and Performance. 37: 529-38. PMID 20822299 DOI: 10.1037/a0018732 |
0.038 |
|
| 2011 |
Samuel FP, Balachandran K. Existence of solutions of quasilinear integrodifferential evolution equations with impulsive conditions Thai Journal of Mathematics. 9: 133-146. |
0.038 |
|
| 1993 |
Mâaza M, Farnoux B, Samuel F. Study of the hydrogen diffusion in superlattices by grazing angle neutron reflectometry Physics Letters A. 181: 245-250. DOI: 10.1016/0375-9601(93)90646-H |
0.037 |
|
| 2014 |
Samuel FW, Edwards A. Joint effect of organizational identity and trust on ERP implementation success: A longitudinal case study 20th Americas Conference On Information Systems, Amcis 2014. |
0.036 |
|
| 2012 |
Samuel F, Jones PB. The making of architectural promenade: Villa Savoye and Schminke House Architectural Research Quarterly. 16: 108-124. DOI: 10.1017/S1359135512000437 |
0.034 |
|
| 2010 |
Samuel FA. Tagore's vision of international education: Relevance and implications for today Educational Forum. 74: 347-356. DOI: 10.1080/00131725.2010.507103 |
0.032 |
|
| 2006 |
Samuel F. Continuous reinvention Timber Harvesting. 54: 28-32. |
0.032 |
|
| 1986 |
Samuel F. Senate bill provides cutting edge in high-tech race Hospitals. 60: 112. PMID 3533748 |
0.032 |
|
| 1989 |
Samuel FM. A Strategy to Eliminate Inequality of Higher Education Opportunities by Improving Adjunct Faculty Performance Community College Review. 17: 41-47. DOI: 10.1177/009155218901700207 |
0.032 |
|
| 2014 |
Samuel FP, Balachandran K, Gunasekar T. Existence of solutions for impulsive quasilinear mixed volterra-fredholm type integrodifferential equations International Journal of Pure and Applied Mathematics. 90: 195-203. DOI: 10.12732/ijpam.v90i2.9 |
0.032 |
|
| 2014 |
Samuel F, Degarege A, Erko B. Efficacy and side effects of albendazole currently in use against Ascaris, Trichuris and hookworm among school children in Wondo Genet, southern Ethiopia Parasitology International. 63: 450-455. PMID 24211489 DOI: 10.1016/j.parint.2013.10.014 |
0.028 |
|
| 1982 |
Samuel FE. Gains for hospice coverage Contemporary Administrator For Long-Term Care. 5: 13-14. PMID 10298800 |
0.027 |
|
| 1987 |
Samuel FE. The Inevitable Failure of Cost-Containment Strategies Jama: the Journal of the American Medical Association. 257: 2029-2030. PMID 3560371 DOI: 10.1001/jama.1987.03390150045008 |
0.027 |
|
| 1987 |
Samuel FH, Samuel AM. Crystallization of the icosahedral structure in Al-15% Mn melt spun ribbons on continuous annealing: Heating rate 10 K/min and 2 K/min Scripta Metallurgica. 21: 411-414. DOI: 10.1016/0036-9748(87)90171-2 |
0.027 |
|
| 2009 |
Samuel F. Le Corbusier and the art of architecture Architectural Research Quarterly. 13: 16-19. DOI: 10.1017/S1359135509990066 |
0.025 |
|
| 1985 |
Samuel FE. Development of health products affected by economic incentives Federation of American Hospitals Review. 18: 49-51. PMID 10300253 |
0.025 |
|
| 1999 |
Samuel F. The philosophical City of Rabelais and St Teresa - Le Corbusier and Edouard Trouin's scheme for St Baume Literature and Theology. 13: 111-125. |
0.023 |
|
| 2014 |
Samuel FW, Edwards A. Factors related to social media adoption and use for emergency services operations: The case of the NSW SES 20th Americas Conference On Information Systems, Amcis 2014. |
0.023 |
|
| 2014 |
Samuel FW, Laura T. Assessing unobserved heterogeneity in SEM using REBUS-PLS: A case of the application of TAM to social media adoption 20th Americas Conference On Information Systems, Amcis 2014. |
0.023 |
|
| 2015 |
Samuel FA. Human fulfillment and education: A critique of Dewey’s philosophy of education Religion and Education. 42: 99-117. DOI: 10.1080/15507394.2014.914371 |
0.02 |
|
| 2011 |
Samuel FA. Educational Visions from Two Continents: What Tagore adds to the Deweyan perspective Educational Philosophy and Theory. 43: 1161-1174. DOI: 10.1111/j.1469-5812.2010.00648.x |
0.02 |
|
| 2012 |
Samuel FA, Suh B. Teacher Candidates Reconcile The Child and the Curriculum With No Child Left Behind Educational Forum. 76: 372-382. DOI: 10.1080/00131725.2012.682201 |
0.018 |
|
| 1993 |
Samuel AM, Samuel FH. The reduced pressure test as a measuring Metallurgical Transactions A. 24: 1857-1868. DOI: 10.1007/BF02657860 |
0.016 |
|
| 2002 |
Samuel FO, Cole AH. A comparison of mothers knowledge, attitudes, and utilization in relation to soybeans and cowpeas for child feeding in a Nigerian rural area Food and Nutrition Bulletin. 23: 248-252. PMID 12362587 |
0.016 |
|
| 1981 |
Samuel FE. Ading population adds to the burden of coping with problems of long-term care Federation of American Hospitals Review. 14: 40-42. PMID 10309342 |
0.014 |
|
| 2015 |
Samuel F. Home economics Economy and Architecture. 86-98. |
0.014 |
|
| 1986 |
Samuel FE. Medical technology and the hospital's competitive edge Michigan Hospitals. 22. PMID 10277375 |
0.014 |
|
| 1988 |
Samuel FE. Let's make the self-care revolution work. Self-medication in America's future Vital Speeches of the Day. 54: 398-400. PMID 10286978 |
0.014 |
|
| 1991 |
Samuel FE. On FDA's future American Pharmacy. PMID 1927896 |
0.013 |
|
| 1986 |
Samuel FE. Cost concerns plunge technology into a confidence crisis Health Management Quarterly : Hmq. 17-20. PMID 10276320 |
0.01 |
|
| 2013 |
Samuel F. Reply Arqueologia Mexicana. 6. |
0.01 |
|
| 2001 |
Samuel F. Le corbusier, Rabelais and the Oracle of the Holy Bottle Word and Image. 17: 325-338. |
0.01 |
|
| 2000 |
Samuel F. Le Corbusier, Teilhard de Chardin and La Planétisation humaine: Spiritual ideas at the heart of modernism French Cultural Studies. 11: 181-199. DOI: 10.1177/095715580001103202 |
0.01 |
|
| 1999 |
Samuel F. A profane annunciation: The representation of sexuality at Ronchamp Journal of Architectural Education. 53: 74-90. DOI: 10.1162/104648899564448 |
0.01 |
|
| 1999 |
Samuel F. The representation of Mary in the architecture of Le Corbusier's Chapel at Ronchamp Church History. 68: 398-416. |
0.01 |
|
| 1991 |
Samuel FE. Safe Medical Devices Act of 1990 Health Affairs. 10: 192-195. PMID 2045049 |
0.01 |
|
| 1988 |
Samuel FE. Technology and costs: complex relationship Hospitals. 62: 72. PMID 3181945 |
0.01 |
|
| 1987 |
Samuel FE. Health care in America: changes and challenges Vital Speeches of the Day. 53: 335-337. PMID 10301479 |
0.01 |
|
| 1983 |
Samuel FE. Home health care/the lame ducks did it Contemporary Administrator For Long-Term Care. 6: 27. PMID 10298844 |
0.01 |
|
| 1982 |
Samuel F. Home health/challenges and cutbacks Contemporary Administrator For Long-Term Care. 5: 30-31. PMID 10295176 |
0.01 |
|
| 1980 |
Samuel FE. Home health care: a proprietary perspective Home Health Review. 3: 22-28. PMID 10297764 |
0.01 |
|
| 1947 |
Samuel F. The East African groundnuts scheme African Affairs. 46: 135-145. |
0.01 |
|
| Hide low-probability matches. |