Year |
Citation |
Score |
2020 |
Chadha K, Tian Y, Bocher P, Spray JG, Aranas C. Microstructure Evolution, Mechanical Properties and Deformation Behavior of an Additively Manufactured Maraging Steel. Materials (Basel, Switzerland). 13. PMID 32455718 DOI: 10.3390/Ma13102380 |
0.429 |
|
2020 |
Vanderesse N, Texier D, Bocher P. Effect of porosities on brazed martensitic steel tensile properties: 2D and 3D pre-mortem vs post-mortem characterizations Materials Characterization. 160: 110084. DOI: 10.1016/J.Matchar.2019.110084 |
0.312 |
|
2020 |
Maurel P, Weiss L, Grosdidier T, Bocher P. How does surface integrity of nanostructured surfaces induced by severe plastic deformation influence fatigue behaviors of Al alloys with enhanced precipitation International Journal of Fatigue. 140: 105792. DOI: 10.1016/J.Ijfatigue.2020.105792 |
0.41 |
|
2020 |
Bretin R, Levesque M, Pilvin P, Bocher P. Neighborhood effect within polycrystalline materials: Elastoplastic micromechanical analysis by cellular automaton and finite element International Journal of Fatigue. 137: 105634. DOI: 10.1016/J.Ijfatigue.2020.105634 |
0.414 |
|
2020 |
Ajaja J, Jomaa W, Bocher P, Chromik R, Brochu M. High cycle fatigue behavior of hard turned 300 M ultra-high strength steel International Journal of Fatigue. 131: 105380. DOI: 10.1016/J.Ijfatigue.2019.105380 |
0.395 |
|
2020 |
Bag A, Delbergue D, Ajaja J, Bocher P, Lévesque M, Brochu M. Effect of different shot peening conditions on the fatigue life of 300 M steel submitted to high stress amplitudes International Journal of Fatigue. 130: 105274. DOI: 10.1016/J.Ijfatigue.2019.105274 |
0.416 |
|
2020 |
Toubal L, Chaabouni H, Bocher P, Jianqiang C. Monitoring fracture of high-strength steel under tensile and constant loading using acoustic emission analysis Engineering Failure Analysis. 108: 104260. DOI: 10.1016/J.Engfailanal.2019.104260 |
0.321 |
|
2020 |
Foroozmehr F, Bocher P. On the ductile rupture of 13% Cr-4% Ni martensitic stainless steels International Journal of Fracture. 224: 67-82. DOI: 10.1007/S10704-020-00446-2 |
0.442 |
|
2020 |
Jamshidinia M, Ghasemi‐Nanesa H, Bocher P, Nuño N, Poorganji B, Habibnejad-Korayem M. Microstructural Alteration of Alloyed Steel in Direct Metal Laser Melting by Powder Bed Deposition System Steel Research International. 1900667. DOI: 10.1002/Srin.201900667 |
0.309 |
|
2019 |
Delbergue D, Texier D, Lévesque M, Bocher P. Diffracting-grain identification from electron backscatter diffraction maps during residual stress measurements: a comparison between the sin2ψ and cosα methods Journal of Applied Crystallography. 52: 828-843. DOI: 10.1107/S1600576719008744 |
0.38 |
|
2019 |
Maurel P, Weiss L, Bocher P, Fleury E, Grosdidier T. Oxide dependent wear mechanisms of titanium against a steel counterface: Influence of SMAT nanostructured surface Wear. 245-255. DOI: 10.1016/J.Wear.2019.05.007 |
0.345 |
|
2019 |
Ebrahimi G, Momeni A, Ezatpour H, Jahazi M, Bocher P. Dynamic recrystallization in Monel400 Ni-Cu alloy: Mechanism and role of twinning Materials Science and Engineering: A. 744: 376-385. DOI: 10.1016/J.Msea.2018.12.045 |
0.301 |
|
2019 |
Bertrand R, Robe H, Texier D, Zedan Y, Feulvarch E, Bocher P. Analysis of AA2XXX/AA7XXX friction stir welds Journal of Materials Processing Technology. 271: 312-324. DOI: 10.1016/J.Jmatprotec.2019.03.027 |
0.366 |
|
2019 |
Bretin R, Levesque M, Bocher P. Neighborhood effect on the strain distribution in linearly elastic polycrystals: Part 2 – Cellular Automaton International Journal of Solids and Structures. 49-67. DOI: 10.1016/J.Ijsolstr.2019.07.005 |
0.439 |
|
2019 |
Bretin R, Levesque M, Bocher P. Neighborhood effect on the strain distribution in linearly elastic polycrystals: Part 1 – Finite element study of the interaction between grains International Journal of Solids and Structures. 36-48. DOI: 10.1016/J.Ijsolstr.2019.05.015 |
0.381 |
|
2019 |
Bag A, Delbergue D, Bocher P, Lévesque M, Brochu M. Statistical analysis of high cycle fatigue life and inclusion size distribution in shot peened 300M steel International Journal of Fatigue. 118: 126-138. DOI: 10.1016/J.Ijfatigue.2018.08.009 |
0.391 |
|
2019 |
Bianchetti C, Delbergue D, Bocher P, Lévesque M, Brochu M. Analytical fatigue life prediction of shot peened AA 7050-T7451 International Journal of Fatigue. 118: 271-281. DOI: 10.1016/J.Ijfatigue.2018.07.007 |
0.407 |
|
2019 |
Sun B, Ma Y, Vanderesse N, Varanasi RS, Song W, Bocher P, Ponge D, Raabe D. Macroscopic to nanoscopic in situ investigation on yielding mechanisms in ultrafine grained medium Mn steels: Role of the austenite-ferrite interface Acta Materialia. 178: 10-25. DOI: 10.1016/J.Actamat.2019.07.043 |
0.384 |
|
2019 |
Liu J, Vanderesse N, Stinville J, Pollock T, Bocher P, Texier D. In-plane and out-of-plane deformation at the sub-grain scale in polycrystalline materials assessed by confocal microscopy Acta Materialia. 169: 260-274. DOI: 10.1016/J.Actamat.2019.03.001 |
0.379 |
|
2019 |
Javadi H, Jomaa W, Songmene V, Brochu M, Bocher P. Inconel 718 Superalloy Controlled Surface Integrity for Fatigue Applications Produced by Precision Turning International Journal of Precision Engineering and Manufacturing. 20: 1297-1310. DOI: 10.1007/S12541-019-00145-6 |
0.433 |
|
2019 |
Touazine H, Chadha K, Jahazi M, Bocher P. Characterization of Subsurface Microstructural Alterations Induced by Hard Turning of Inconel 718 Journal of Materials Engineering and Performance. 28: 7016-7024. DOI: 10.1007/S11665-019-04416-1 |
0.388 |
|
2019 |
Tabiai I, Texier D, Bocher P, Therriault D, Levesque M. In-situ Full Field Out of Plane Displacement and Strain Measurements at the Micro-Scale in Single Reinforcement Composites under Transverse Load Experimental Mechanics. 60: 359-377. DOI: 10.1007/S11340-019-00541-Z |
0.354 |
|
2019 |
Khalifa M, Barka N, Brousseau J, Bocher P. Optimization of the edge effect of 4340 steel specimen heated by induction process with flux concentrators using finite element axis-symmetric simulation and experimental validation The International Journal of Advanced Manufacturing Technology. 104: 4549-4557. DOI: 10.1007/S00170-019-04292-Y |
0.637 |
|
2019 |
Ajaja J, Jomaa W, Bocher P, Chromik RR, Songmene V, Brochu M. Hard turning multi-performance optimization for improving the surface integrity of 300M ultra-high strength steel The International Journal of Advanced Manufacturing Technology. 104: 141-157. DOI: 10.1007/S00170-019-03863-3 |
0.412 |
|
2019 |
Khalifa M, Barka N, Brousseau J, Bocher P. Reduction of edge effect using response surface methodology and artificial neural network modeling of a spur gear treated by induction with flux concentrators The International Journal of Advanced Manufacturing Technology. 104: 103-117. DOI: 10.1007/S00170-019-03817-9 |
0.636 |
|
2018 |
Vanderesse N, Richter A, Nuño N, Bocher P. Measurement of deformation heterogeneities in additive manufactured lattice materials by Digital Image Correlation: Strain maps analysis and reliability assessment. Journal of the Mechanical Behavior of Biomedical Materials. 86: 397-408. PMID 30029167 DOI: 10.1016/J.Jmbbm.2018.07.010 |
0.304 |
|
2018 |
Hoa Ngan N, Bocher P. Finite Element Analysis Simulation of the Effect of Induction Hardening on Rolling Contact Fatigue Journal of Tribology. 140. DOI: 10.1115/1.4040305 |
0.428 |
|
2018 |
Wang W, Liu H, Zhu C, Bocher P, Liu H, Sun Z. Evaluation of Rolling Contact Fatigue of a Carburized Wind Turbine Gear Considering the Residual Stress and Hardness Gradient Journal of Tribology. 140. DOI: 10.1115/1.4040052 |
0.448 |
|
2018 |
Javadi H, Jomaa W, Dalgaard E, Brochu M, Bocher P. Influence of surface residual stresses on the fatigue life and crack propagation behavior of turned Inconel 718 super-alloy Matec Web of Conferences. 165: 18004. DOI: 10.1051/MATECCONF/201816518004 |
0.312 |
|
2018 |
Novelli M, Bocher P, Grosdidier T. Effect of cryogenic temperatures and processing parameters on gradient-structure of a stainless steel treated by ultrasonic surface mechanical attrition treatment Materials Characterization. 139: 197-207. DOI: 10.1016/J.Matchar.2018.02.028 |
0.446 |
|
2018 |
Masoumi Khalilabad M, Zedan Y, Texier D, Jahazi M, Bocher P. Effect of tool geometry and welding speed on mechanical properties of dissimilar AA2198–AA2024 FSWed joint Journal of Manufacturing Processes. 34: 86-95. DOI: 10.1016/J.Jmapro.2018.05.030 |
0.364 |
|
2018 |
Tu F, Delbergue D, Klotz T, Bag A, Miao H, Bianchetti C, Brochu M, Bocher P, Levesque M. Discrete element-periodic cell coupling model and investigations on shot stream expansion, Almen intensities and target materials International Journal of Mechanical Sciences. 145: 353-366. DOI: 10.1016/J.Ijmecsci.2018.06.023 |
0.441 |
|
2018 |
Liu H, Liu H, Bocher P, Zhu C, Sun Z. Effects of case hardening properties on the contact fatigue of a wind turbine gear pair International Journal of Mechanical Sciences. 141: 520-527. DOI: 10.1016/J.Ijmecsci.2018.04.010 |
0.436 |
|
2018 |
Texier D, Atmani F, Bocher P, Nadeau F, Chen J, Zedan Y, Vanderesse N, Demers V. Fatigue performances of FSW and GMAW aluminum alloys welded joints: Competition between microstructural and structural-contact-fretting crack initiation International Journal of Fatigue. 116: 220-233. DOI: 10.1016/J.Ijfatigue.2018.06.020 |
0.377 |
|
2018 |
Klotz T, Delbergue D, Bocher P, Lévesque M, Brochu M. Surface characteristics and fatigue behavior of shot peened Inconel 718 International Journal of Fatigue. 110: 10-21. DOI: 10.1016/J.Ijfatigue.2018.01.005 |
0.4 |
|
2018 |
Vanderesse N, Larregain B, Bridier F, Bocher P. Experimental Assessment of High Heating Rates in Induction Heating with Temperature-Sensitive Lacquers Journal of Materials Engineering and Performance. 27: 3831-3843. DOI: 10.1007/S11665-018-3499-Z |
0.351 |
|
2018 |
Chen J, Demers V, Turner DP, Bocher P. Experimental Investigation on High-Cycle Fatigue of Inconel 625 Superalloy Brazed Joints Metallurgical and Materials Transactions A. 49: 1244-1253. DOI: 10.1007/S11661-018-4474-X |
0.355 |
|
2018 |
Nazemi F, Hamel-Akré J, Bocher P. Modeling of cementite coarsening during tempering of low-alloyed-medium carbon steel Journal of Materials Science. 53: 6198-6218. DOI: 10.1007/S10853-017-1943-3 |
0.371 |
|
2018 |
Khalifa M, Barka N, Brousseau J, Bocher P. Sensitivity study of hardness profile of 4340 steel disc hardened by induction according to machine parameters and geometrical factors The International Journal of Advanced Manufacturing Technology. 101: 209-221. DOI: 10.1007/S00170-018-2892-Y |
0.647 |
|
2017 |
Jomaa W, Songmene V, Bocher P, Gakwaya A. FEA-Based Comparative Investigation on High Speed Machining of Aluminum Alloys AA6061-T6 and AA7075-T651 Solid State Phenomena. 261: 347-353. DOI: 10.4028/Www.Scientific.Net/Ssp.261.347 |
0.468 |
|
2017 |
McMeekin K, Sirois F, Tousignant M, Bocher P. Improving the accuracy of time-harmonic FE simulations in induction heating applications Compel - the International Journal For Computation and Mathematics in Electrical and Electronic Engineering. 36: 526-534. DOI: 10.1108/Compel-05-2016-0203 |
0.368 |
|
2017 |
Jomaa W, Songmene V, Bocher P. Predictive analytical modeling of cutting forces generated by high-speed machining of ductile and hard metals Machining Science and Technology. 21: 335-361. DOI: 10.1080/10910344.2017.1283956 |
0.351 |
|
2017 |
Tu F, Delbergue D, Miao H, Klotz T, Brochu M, Bocher P, Levesque M. A sequential DEM-FEM coupling method for shot peening simulation Surface and Coatings Technology. 319: 200-212. DOI: 10.1016/J.Surfcoat.2017.03.035 |
0.413 |
|
2017 |
Sun B, Vanderesse N, Fazeli F, Scott C, Chen J, Bocher P, Jahazi M, Yue S. Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel Scripta Materialia. 133: 9-13. DOI: 10.1016/J.Scriptamat.2017.01.022 |
0.32 |
|
2017 |
Comot P, Bocher P, Belanger P. Ultrasonic guided wave inspection of Inconel 625 brazed lap joints: Simulation and experimentation Ndt & E International. 91: 71-78. DOI: 10.1016/J.Ndteint.2017.06.007 |
0.302 |
|
2017 |
Anderson M, Thielin AL, Bridier F, Bocher P, Savoie J. δ Phase precipitation in Inconel 718 and associated mechanical properties Materials Science and Engineering A. 679: 48-55. DOI: 10.1016/J.Msea.2016.09.114 |
0.368 |
|
2017 |
Meimandi S, Vanderesse N, Thibault D, Bocher P, Viens M. Macro-defects characterization in cast CA-6NM martensitic stainless steel Materials Characterization. 124: 31-39. DOI: 10.1016/J.Matchar.2016.11.040 |
0.353 |
|
2017 |
Foroozmehr F, Verreman Y, Chen J, Thibault D, Bocher P. Effect of inclusions on fracture behavior of cast and wrought 13% Cr-4% Ni martensitic stainless steels Engineering Fracture Mechanics. 175: 262-278. DOI: 10.1016/J.Engfracmech.2017.02.002 |
0.353 |
|
2017 |
Siredey-Schwaller N, Hamel-Akré J, Peltier L, Hazotte A, Bocher P. Solidification sequence of Ni-Si-Cr ~3wt% B brazing alloys Welding in the World. 61: 1253-1265. DOI: 10.1007/S40194-017-0503-4 |
0.343 |
|
2017 |
Stinville JC, Echlin MP, Callahan PG, Miller VM, Texier D, Bridier F, Bocher P, Pollock TM. Measurement of Strain Localization Resulting from Monotonic and Cyclic Loading at 650 ∘C in Nickel Base Superalloys Experimental Mechanics. 57: 1289-1309. DOI: 10.1007/S11340-017-0286-Y |
0.338 |
|
2017 |
Touazine H, Akab J, Jahazi M, Tahan A, Jomaa W, Bocher P. Modeling of the microstructure alteration induced by hard turning of Inconel 718 The International Journal of Advanced Manufacturing Technology. 93: 3705-3712. DOI: 10.1007/S00170-017-0787-Y |
0.419 |
|
2016 |
Javadi H, Jomaa W, Texier D, Brochu M, Bocher P. Surface Roughness Effects on the Fatigue Behavior of As-Machined Inconel718 Solid State Phenomena. 258: 306-309. DOI: 10.4028/Www.Scientific.Net/Ssp.258.306 |
0.4 |
|
2016 |
Jomaa W, Songmene V, Bocher P. An Investigation of Machining-Induced Residual Stresses and Microstructure of Induction-Hardened AISI 4340 Steel Materials and Manufacturing Processes. 31: 838-844. DOI: 10.1080/10426914.2015.1070431 |
0.467 |
|
2016 |
Texier D, Zedan Y, Amoros T, Feulvarch E, Stinville JC, Bocher P. Near-surface mechanical heterogeneities in a dissimilar aluminum alloys friction stir welded joint Materials and Design. 108: 217-229. DOI: 10.1016/J.Matdes.2016.06.091 |
0.364 |
|
2016 |
Vanderesse N, Ky I, Quevedo González F, Nuño N, Bocher P. Image analysis characterization of periodic porous materials produced by additive manufacturing Materials and Design. 92: 767-778. DOI: 10.1016/J.Matdes.2015.12.062 |
0.318 |
|
2016 |
Amrei MM, Monajati H, Thibault D, Verreman Y, Germain L, Bocher P. Microstructure characterization and hardness distribution of 13Cr4Ni multipass weld metal Materials Characterization. 111: 128-136. DOI: 10.1016/J.Matchar.2015.11.022 |
0.372 |
|
2016 |
Giraud L, Robe H, Claudin C, Desrayaud C, Bocher P, Feulvarch E. Investigation into the dissimilar friction stir welding of AA7020-T651 and AA6060-T6 Journal of Materials Processing Technology. 235: 220-230. DOI: 10.1016/J.Jmatprotec.2016.04.020 |
0.358 |
|
2016 |
Aghasibeig M, Monajatizadeh H, Bocher P, Dolatabadi A, Wuthrich R, Moreau C. Cold spray as a novel method for development of nickel electrode coatings for hydrogen production International Journal of Hydrogen Energy. 41: 227-238. DOI: 10.1016/J.Ijhydene.2015.09.123 |
0.329 |
|
2016 |
Pourian MH, Bridier F, Pilvin P, Bocher P. Prediction of crack initiation sites in alpha Ti-alloys microstructures under dwell-fatigue using Cellular Automaton simulation method International Journal of Fatigue. 85: 85-97. DOI: 10.1016/J.Ijfatigue.2015.12.010 |
0.438 |
|
2016 |
Savaria V, Bridier F, Bocher P. Predicting the effects of material properties gradient and residual stresses on the bending fatigue strength of induction hardened aeronautical gears International Journal of Fatigue. 85: 70-84. DOI: 10.1016/J.Ijfatigue.2015.12.004 |
0.786 |
|
2016 |
Novelli M, Fundenberger JJ, Bocher P, Grosdidier T. On the effectiveness of surface severe plastic deformation by shot peening at cryogenic temperature Applied Surface Science. 389: 1169-1174. DOI: 10.1016/J.Apsusc.2016.08.009 |
0.369 |
|
2016 |
Amrei MM, Monajati H, Thibault D, Verreman Y, Bocher P. Effects of Various Post-Weld Heat Treatments on Austenite and Carbide Formation in a 13Cr4Ni Steel Multipass Weld Metallography, Microstructure, and Analysis. 5: 50-61. DOI: 10.1007/S13632-015-0251-Z |
0.377 |
|
2016 |
Chen J, Demers V, Cadotte E, Turner D, Bocher P. Structural Performance of Inconel 625 Superalloy Brazed Joints Journal of Materials Engineering and Performance. 26: 547-553. DOI: 10.1007/S11665-016-2491-8 |
0.409 |
|
2016 |
Jomaa W, Songmene V, Bocher P. An Hybrid Approach Based on Machining and Dynamic Tests Data for the Identification of Material Constitutive Equations Journal of Materials Engineering and Performance. 1-18. DOI: 10.1007/S11665-016-1950-6 |
0.358 |
|
2016 |
Anderson M, Bridier F, Gholipour J, Jahazi M, Wanjara P, Bocher P, Savoie J. Mechanical and Metallurgical Evolution of Stainless Steel 321 in a Multi-step Forming Process Journal of Materials Engineering and Performance. 1-13. DOI: 10.1007/S11665-016-1928-4 |
0.412 |
|
2016 |
Stinville JC, Echlin MP, Texier D, Bridier F, Bocher P, Pollock TM. Sub-Grain Scale Digital Image Correlation by Electron Microscopy for Polycrystalline Materials during Elastic and Plastic Deformation Experimental Mechanics. 56: 197-216. DOI: 10.1007/S11340-015-0083-4 |
0.371 |
|
2016 |
Jomaa W, Lévesque J, Bocher P, Divialle A, Gakwaya A. Optimization study of dry peripheral milling process for improving aeronautical part integrity using Grey relational analysis The International Journal of Advanced Manufacturing Technology. 91: 931-942. DOI: 10.1007/S00170-016-9777-8 |
0.342 |
|
2016 |
Touazine H, Jahazi M, Bocher P. Accurate determination of damaged subsurface layers in machined Inconel 718 International Journal of Advanced Manufacturing Technology. 1-9. DOI: 10.1007/S00170-016-9039-9 |
0.322 |
|
2015 |
Vanderesse N, Anderson M, Bridier F, Bocher P. Inter- and intragranular delta phase quantitative characterization in Inconel 718 by means of image analysis. Journal of Microscopy. PMID 26372682 DOI: 10.1111/Jmi.12317 |
0.321 |
|
2015 |
Toubal L, Bocher P, Moreau A. Bimodal dwell-fatigue Weibull distribution of forged titanium IMI 834 International Journal of Damage Mechanics. 24: 629-645. DOI: 10.1177/1056789514541823 |
0.353 |
|
2015 |
Kamkar N, Bridier F, Jedrzejowski P, Bocher P. Water droplet impact erosion damage initiation in forged Ti-6Al-4V Wear. 322: 192-202. DOI: 10.1016/J.Wear.2014.10.020 |
0.328 |
|
2015 |
Robe H, Zedan Y, Chen J, Monajati H, Feulvarch E, Bocher P. Microstructural and mechanical characterization of a dissimilar friction stir welded butt joint made of AA2024-T3 and AA2198-T3 Materials Characterization. 110: 242-251. DOI: 10.1016/J.Matchar.2015.10.029 |
0.379 |
|
2015 |
Savaria V, Monajati H, Bridier F, Bocher P. Measurement and correction of residual stress gradients in aeronautical gears after various induction surface hardening treatments Journal of Materials Processing Technology. 220: 113-123. DOI: 10.1016/J.Jmatprotec.2014.12.009 |
0.791 |
|
2015 |
Stinville JC, Bridier F, Ponsen D, Wanjara P, Bocher P. High and low cycle fatigue behavior of linear friction welded Ti-6Al-4V International Journal of Fatigue. 70: 278-288. DOI: 10.1016/J.Ijfatigue.2014.10.002 |
0.404 |
|
2015 |
Hamid Pourian M, Pilvin P, Bridier F, Bocher P. Modeling the elastoplastic behaviors of alpha Ti-alloys microstructure using Cellular Automaton and finite element methods Computational Materials Science. 99: 33-42. DOI: 10.1016/J.Commatsci.2014.11.027 |
0.742 |
|
2015 |
Stinville JC, Vanderesse N, Bridier F, Bocher P, Pollock TM. High resolution mapping of strain localization near twin boundaries in a nickel-based superalloy Acta Materialia. 98: 29-42. DOI: 10.1016/J.Actamat.2015.07.016 |
0.335 |
|
2015 |
Paquin M, Thibault D, Bocher P, Lévesque JB, Verreman Y, Shinozaki K. Assessment of cold cracking tests for low transformation temperature martensitic stainless steel multipass welds Welding in the World. 59: 521-532. DOI: 10.1007/S40194-015-0227-2 |
0.386 |
|
2015 |
Mokhtabad Amrei M, Verreman Y, Bridier F, Thibault D, Bocher P. Microstructure Characterization of Single and Multipass 13Cr4Ni Steel Welded Joints Metallography, Microstructure, and Analysis. 4: 207-218. DOI: 10.1007/S13632-015-0202-8 |
0.37 |
|
2014 |
Jomaa W, Songmene V, Bocher P. Surface Finish and Residual Stresses Induced by Orthogonal Dry Machining of AA7075-T651. Materials (Basel, Switzerland). 7: 1603-1624. PMID 28788534 DOI: 10.3390/Ma7031603 |
0.406 |
|
2014 |
Hoseini M, Bocher P, Shahryari A, Azari F, Szpunar JA, Vali H. On the importance of crystallographic texture in the biocompatibility of titanium based substrate. Journal of Biomedical Materials Research. Part A. 102: 3631-8. PMID 24254817 DOI: 10.1002/Jbm.A.35028 |
0.354 |
|
2014 |
Savaria V, Bridier F, Bocher P. Measuring in-depth residual stress gradients: The challenge of induction hardened parts Materials Science Forum. 768: 158-165. DOI: 10.4028/Www.Scientific.Net/Msf.768-769.158 |
0.794 |
|
2014 |
Bridier F, Stinville JC, Vanderesse N, Villechaise P, Bocher P. Microscopic strain and crystal rotation measurement within metallurgical grains Key Engineering Materials. 592: 493-496. DOI: 10.4028/Www.Scientific.Net/Kem.592-593.493 |
0.325 |
|
2014 |
Touazine H, Jahazi M, Bocher P. Influence of hard turning on microstructure evolution in the subsurface layers of Inconel 718 Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 2. DOI: 10.1115/IMECE2014-37348 |
0.309 |
|
2014 |
Gagnon M, Tahan A, Bocher P, Thibault D. Influence of load spectrum assumptions on the expected reliability of hydroelectric turbines: A case study Structural Safety. 50: 1-8. DOI: 10.1016/J.Strusafe.2014.03.008 |
0.553 |
|
2014 |
Ruiz-Vargas J, Siredey-Schwaller N, Noyrez P, Mathieu S, Bocher P, Gey N. Potential and limitations of microanalysis SEM techniques to characterize borides in brazed Ni-based superalloys Materials Characterization. 94: 46-57. DOI: 10.1016/J.Matchar.2014.04.009 |
0.355 |
|
2014 |
Momeni A, Ebrahimi GR, Jahazi M, Bocher P. Microstructure evolution at the onset of discontinuous dynamic recrystallization: A physics-based model of subgrain critical size Journal of Alloys and Compounds. 587: 199-210. DOI: 10.1016/J.Jallcom.2013.10.180 |
0.367 |
|
2014 |
Pourian MH, Pilvin P, Bridier F, Bocher P. Heterogeneous elastic behavior of HCP titanium polycrystalline aggregates simulated by cellular automaton and finite element Computational Materials Science. 92: 468-475. DOI: 10.1016/J.Commatsci.2014.05.068 |
0.38 |
|
2014 |
Lapalme M, Hoseini M, Bocher P, Colle AR, Lévesque M. Realistic Cold Expansion Finite Element Model and Experimental Validations for Aluminium Alloys Experimental Mechanics. 54: 841-855. DOI: 10.1007/S11340-013-9844-0 |
0.47 |
|
2013 |
Barka N, Khelalfa AJ, Ouafi AE, Bocher P, Brousseau J. Effect of skin depth on hardness profile of gear heated by induction using 2D model Advanced Materials Research. 664: 884-890. DOI: 10.4028/Www.Scientific.Net/Amr.664.884 |
0.632 |
|
2013 |
Barka N, El Ouafi A, Bocher P, Brousseau J. Effects of material properties fornon-equilibrium conditions in induction heating process Advanced Materials Research. 664: 496-503. DOI: 10.4028/Www.Scientific.Net/Amr.664.496 |
0.628 |
|
2013 |
Barka N, El Ouafi A, Bocher P, Brousseau J. Explorative study and prediction of overtemperingregion of disc heated by induction process using 2D axisymmetric model and experimental tests Advanced Materials Research. 658: 259-265. DOI: 10.4028/Www.Scientific.Net/Amr.631-632.417 |
0.637 |
|
2013 |
Anderson M, Gholipour J, Bridier F, Bocher P, Jahazi M, Savoie J, Wanjara P. Improving the formability of stainless steel 321 through multistep deformation for hydroforming applications Transactions of the Canadian Society For Mechanical Engineering. 37: 39-52. DOI: 10.1139/Tcsme-2013-0003 |
0.434 |
|
2013 |
Kamkar N, Bridier F, Bocher P, Jedrzejowski P. Water droplet erosion mechanisms in rolled Ti-6Al-4V Wear. 301: 442-448. DOI: 10.1016/J.Wear.2013.01.005 |
0.332 |
|
2013 |
Gariépy A, Bridier F, Hoseini M, Bocher P, Perron C, Lévesque M. Experimental and numerical investigation of material heterogeneity in shot peened aluminium alloy AA2024-T351 Surface and Coatings Technology. 219: 15-30. DOI: 10.1016/J.Surfcoat.2012.12.046 |
0.438 |
|
2013 |
Gagnon M, Tahan A, Bocher P, Thibault D. On the fatigue reliability of hydroelectric Francis runners Procedia Engineering. 66: 565-574. DOI: 10.1016/J.Proeng.2013.12.108 |
0.559 |
|
2013 |
Yi J, Gharghouri M, Bocher P, Medraj M. Distortion and residual stress measurements of induction hardened AISI 4340 discs Materials Chemistry and Physics. 142: 248-258. DOI: 10.1016/J.Matchemphys.2013.07.012 |
0.445 |
|
2013 |
Moreau A, Toubal L, Bocher P, Humbert M, Uta E, Gey N. Evaluation of macrozone dimensions by ultrasound and EBSD techniques Materials Characterization. 75: 115-128. DOI: 10.1016/J.Matchar.2012.09.011 |
0.356 |
|
2013 |
Ruiz-Vargas J, Siredey-Schwaller N, Bocher P, Hazotte A. First melting stages during isothermal brazing, of Ni/BNi-2 couples Journal of Materials Processing Technology. 213: 2074-2080. DOI: 10.1016/J.Jmatprotec.2013.06.008 |
0.347 |
|
2013 |
Gariépy A, Larose S, Perron C, Bocher P, Lévesque M. On the effect of the orientation of sheet rolling direction in shot peen forming Journal of Materials Processing Technology. 213: 926-938. DOI: 10.1016/J.Jmatprotec.2013.01.003 |
0.477 |
|
2013 |
Ruiz-Vargas J, Siredey-Schwaller N, Gey N, Bocher P, Hazotte A. Microstructure development during isothermal brazing of Ni/BNi-2 couples Journal of Materials Processing Technology. 213: 20-29. DOI: 10.1016/J.Jmatprotec.2012.07.016 |
0.382 |
|
2013 |
Boutana N, Bocher P, Jahazi M. Discrepancy between fatigue and dwell-fatigue behavior of near alpha titanium alloys simulated by cellular automata International Journal of Fatigue. 51: 49-56. DOI: 10.1016/J.Ijfatigue.2012.09.012 |
0.42 |
|
2013 |
Gagnon M, Tahan A, Bocher P, Thibault D. A probabilistic model for the onset of High Cycle Fatigue (HCF) crack propagation: Application to hydroelectric turbine runner International Journal of Fatigue. 47: 300-307. DOI: 10.1016/J.Ijfatigue.2012.09.011 |
0.589 |
|
2013 |
Gariépy A, Larose S, Perron C, Bocher P, Lévesque M. On the effect of the peening trajectory in shot peen forming Finite Elements in Analysis and Design. 69: 48-61. DOI: 10.1016/J.Finel.2013.02.003 |
0.371 |
|
2013 |
Maldar AR, Ebrahimi GR, Haghshenas M, Jahazi M, Bocher P. Thermomechanical characterization of Mg-9Al-1Zn alloy using power dissipation maps Journal of Materials Engineering and Performance. 22: 3306-3314. DOI: 10.1007/S11665-013-0616-X |
0.325 |
|
2013 |
Larregain B, Vanderesse N, Bridier F, Bocher P, Arkinson P. Method for accurate surface temperature measurements during fast induction heating Journal of Materials Engineering and Performance. 22: 1907-1913. DOI: 10.1007/S11665-013-0527-X |
0.351 |
|
2013 |
Barka N, Bocher P, Brousseau J. Sensitivity study of hardness profile of 4340 specimen heated by induction process using axisymmetric modeling International Journal of Advanced Manufacturing Technology. 69: 2747-2756. DOI: 10.1007/S00170-013-5212-6 |
0.62 |
|
2013 |
Jomaa W, Songmene V, Bocher P. On residual stress changes after orthogonal machining of induction hardened AISI 4340 steel Materials Science and Technology Conference and Exhibition 2013, Ms and T 2013. 1: 94-103. |
0.327 |
|
2013 |
Kassab R, Champliaud H, Bocher P, Lanteigne J, Lê VN. Strain variations of AISI 4340 steel undergoing metallurgical transformations during induction hardening heat treatment Materials Science and Technology Conference and Exhibition 2013, Ms and T 2013. 2: 774-783. |
0.302 |
|
2012 |
Hoseini M, Bocher P, Azari F, Vali H, Szpunar JA. Effects of grain size and texture on the biocompatibility of commercially pure titanium Materials Science Forum. 702: 822-825. DOI: 10.4028/Www.Scientific.Net/Msf.702-703.822 |
0.35 |
|
2012 |
Barka N, Bocher P, Brousseau J, Arkinson P. Effect of dimensional variation on induction process parameters using 2D simulation Advanced Materials Research. 409: 395-400. DOI: 10.4028/Www.Scientific.Net/Amr.409.395 |
0.635 |
|
2012 |
Barka N, Chebak A, Ouafi A, Bocher P, Brousseau J. Sensitivity study of temperature profile of 4340 spur gear heated by induction process using 3D model Applied Mechanics and Materials. 232: 736-741. DOI: 10.4028/Www.Scientific.Net/Amm.232.736 |
0.642 |
|
2012 |
Barka N, El Ouafi A, Chebak A, Bocher P, Brousseau J. Study of induction heating process applied to internal gear using 3D model Applied Mechanics and Materials. 232: 730-735. DOI: 10.4028/Www.Scientific.Net/Amm.232.730 |
0.61 |
|
2012 |
Gagnon M, Tahan A, Bocher P, Thibault D. On the stochastic simulation of hydroelectric turbine blades transient response Mechanical Systems and Signal Processing. 32: 178-187. DOI: 10.1016/J.Ymssp.2012.02.006 |
0.55 |
|
2012 |
Hoseini M, Hamid Pourian M, Bridier F, Vali H, Szpunar JA, Bocher P. Thermal stability and annealing behaviour of ultrafine grained commercially pure titanium Materials Science and Engineering A. 532: 58-63. DOI: 10.1016/J.Msea.2011.10.062 |
0.719 |
|
2012 |
Savaria V, Bridier F, Bocher P. Computational quantification and correction of the errors induced by layer removal for subsurface residual stress measurements International Journal of Mechanical Sciences. 64: 184-195. DOI: 10.1016/J.Ijmecsci.2012.07.003 |
0.767 |
|
2012 |
Gariépy A, Cyr J, Levers A, Perron C, Bocher P, Lévesque M. Potential applications of peen forming finite element modelling Advances in Engineering Software. 52: 60-71. DOI: 10.1016/J.Advengsoft.2012.06.006 |
0.335 |
|
2011 |
Savaria V, Hoseini M, Bridier F, Bocher P, Arkinson P. On the measurement of residual stress in induction hardened parts Materials Science Forum. 681: 431-436. DOI: 10.4028/Www.Scientific.Net/Msf.681.431 |
0.789 |
|
2011 |
Thibault D, Bocher P, Thomas M, Lanteigne J, Hovington P, Robichaud P. Reformed austenite transformation during fatigue crack propagation of 13%Cr-4%Ni stainless steel Materials Science and Engineering A. 528: 6519-6526. DOI: 10.1016/J.Msea.2011.04.089 |
0.356 |
|
2010 |
Thibault D, Bocher P, Thomas M, Gharghouri M, Côté M. Residual stress characterization in low transformation temperature 13%Cr-4%Ni stainless steel weld by neutron diffraction and the contour method Materials Science and Engineering A. 527: 6205-6210. DOI: 10.1016/J.Msea.2010.06.035 |
0.449 |
|
2010 |
Anderson M, Gholipour J, Bocher P, Bridier F, Savoie J, Wanjara P. Formability extension of aerospace alloys for tube hydroforming applications International Journal of Material Forming. 3: 303-306. DOI: 10.1007/S12289-010-0767-3 |
0.409 |
|
2010 |
Toubal L, Bocher P, Moreau A, Lévesque D. Macroregion size measurements in bimodal titanium forgings using two-dimensional autocorrelation method Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 41: 744-750. DOI: 10.1007/S11661-009-0128-3 |
0.381 |
|
2009 |
Uta E, Gey N, Bocher P, Humbert M, Gilgert J. Texture heterogeneities in αp/αs titanium forging analysed by EBSD-Relation to fatigue crack propagation Journal of Microscopy. 233: 451-459. DOI: 10.1111/J.1365-2818.2009.03141.X |
0.338 |
|
2009 |
Thibault D, Bocher P, Thomas M. Residual stress and microstructure in welds of 13%Cr-4%Ni martensitic stainless steel Journal of Materials Processing Technology. 209: 2195-2202. DOI: 10.1016/J.Jmatprotec.2008.05.005 |
0.42 |
|
2009 |
Toubal L, Bocher P, Moreau A. Dwell-fatigue life dispersion of a near alpha titanium alloy International Journal of Fatigue. 31: 601-605. DOI: 10.1016/J.Ijfatigue.2008.09.010 |
0.36 |
|
2009 |
Humbert M, Moreau A, Uta E, Gey N, Bocher P, Bescond C. Analysis of backscattered ultrasound amplitude of Ti-5.8Al-4Sn-3.5Zr-0.7Nb-0.5Mo-0.3Si samples in terms of their microstructures and local textures Acta Materialia. 57: 708-714. DOI: 10.1016/J.Actamat.2008.10.012 |
0.333 |
|
2009 |
Hacini L, Van Lê N, Bocher P. Evaluation of residual stresses induced by robotized hammer peening by the contour method Experimental Mechanics. 49: 775-783. DOI: 10.1007/S11340-008-9205-6 |
0.441 |
|
2008 |
Boutana N, Bocher P, Jahazi M, Piot D, Montheillet F. The microstructural modelling of room temperature creep in titanium alloys using a cellular automata model International Journal of Microstructure and Materials Properties. 3: 642-653. DOI: 10.1504/Ijmmp.2008.022041 |
0.42 |
|
2008 |
Boutana N, Bocher P, Jahazi M, Piot D, Montheillet F. Microstructural modeling of cold creep/fatigue in near alpha titanium alloys using cellular automata method Transactions of the Canadian Society For Mechanical Engineering. 32: 195-213. DOI: 10.1139/Tcsme-2008-0013 |
0.431 |
|
2008 |
Hacini L, Van Lê N, Bocher P. Effect of impact energy on residual stresses induced by hammer peening of 304L plates Journal of Materials Processing Technology. 208: 542-548. DOI: 10.1016/J.Jmatprotec.2008.01.025 |
0.466 |
|
2008 |
Germain L, Gey N, Humbert M, Vo P, Jahazi M, Bocher P. Texture heterogeneities induced by subtransus processing of near α titanium alloys Acta Materialia. 56: 4298-4308. DOI: 10.1016/J.Actamat.2008.04.065 |
0.31 |
|
2007 |
Arafin MA, Medraj M, Turner DP, Bocher P. Mathematical modeling and experimental investigations of isothermal solidification during transient liquid phase bonding of nickel superalloys Advanced Materials Research. 15: 882-887. DOI: 10.4028/Www.Scientific.Net/Amr.15-17.882 |
0.363 |
|
2007 |
Barka N, Bocher P, Brousseau J, Galopin M, Sundararajan S. Modeling and sensitivity study of the induction hardening process Advanced Materials Research. 15: 525-530. DOI: 10.4028/Www.Scientific.Net/Amr.15-17.525 |
0.678 |
|
2007 |
Arafin MA, Medraj M, Turner DP, Bocher P. Transient liquid phase bonding of Inconel 718 and Inconel 625 with BNi-2: Modeling and experimental investigations Materials Science and Engineering A. 447: 125-133. DOI: 10.1016/J.Msea.2006.10.045 |
0.351 |
|
2007 |
Vo P, Jahazi M, Yue S, Bocher P. Flow stress prediction during hot working of near-α titanium alloys Materials Science and Engineering A. 447: 99-110. DOI: 10.1016/J.Msea.2006.10.032 |
0.422 |
|
2007 |
Arafin MA, Medraj M, Turner DP, Bocher P. Effect of alloying elements on the isothermal solidification during TLP bonding of SS 410 and SS 321 using a BNi-2 interlayer Materials Chemistry and Physics. 106: 109-119. DOI: 10.1016/J.Matchemphys.2007.05.049 |
0.343 |
|
2006 |
Humbert M, Germain L, Gey N, Bocher P, Jahazi M. Study of the variant selection in sharp textured regions of bimodal IMI 834 billet Materials Science and Engineering A. 430: 157-164. DOI: 10.1016/J.Msea.2006.05.047 |
0.317 |
|
2005 |
Bocher P, Jahazi M, Germain L, Wanjara P, Gey N, Humbert M. β Microtexture analysis in correlation with hcp textured regions observed in a forged near alpha titanium alloy Solid State Phenomena. 105: 127-132. DOI: 10.4028/Www.Scientific.Net/Ssp.105.127 |
0.318 |
|
2005 |
Khodabandeh AR, Jahazi M, Yue S, Bocher P. Impact toughness and tensile properties improvement through microstructure control in hot forged Nb-V microalloyed steel Isij International. 45: 272-280. DOI: 10.2355/Isijinternational.45.272 |
0.406 |
|
2005 |
Germain L, Gey N, Humbert M, Hazotte A, Bocher P, Jahazi M. An automated method to analyze separately the microtextures of primary αp grains and the secondary αs inherited colonies in bimodal titanium alloys Materials Characterization. 54: 216-222. DOI: 10.1016/J.Matchar.2004.11.011 |
0.344 |
|
2005 |
Germain L, Gey N, Humbert M, Bocher P, Jahazi M. Analysis of sharp microtexture heterogeneities in a bimodal IMI 834 billet Acta Materialia. 53: 3535-3543. DOI: 10.1016/J.Actamat.2005.03.043 |
0.316 |
|
2001 |
Girault E, Godet S, Jacques P, Bocher P, Verlinden B, Van Humbeeck J. Effect of hot-rolling in the austenitic region on the formation of isothermal bainite in a 0.4C-1.5Si-1.4Mn steel Le Journal De Physique Iv. 11: Pr8-217-Pr8-222. DOI: 10.1051/Jp4:2001837 |
0.373 |
|
1998 |
Bocher P, Azar J, Adams BL, Jonas JJ. Using Oim to Interpret the Dynamically Recrystallized Texture of a Low Stacking Fault Energy FCC Material Materials Science Forum. 249-254. DOI: 10.4028/Www.Scientific.Net/Msf.273-275.249 |
0.36 |
|
Low-probability matches (unlikely to be authored by this person) |
2014 |
Ebrahimi GR, Momeni A, Jahazi M, Bocher P. Dynamic recrystallization and precipitation in 13Cr super-martensitic stainless steels Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 45: 2219-2231. DOI: 10.1007/S11661-013-2119-7 |
0.299 |
|
2012 |
Gey N, Bocher P, Uta E, Germain L, Humbert M. Texture and microtexture variations in a near-α titanium forged disk of bimodal microstructure Acta Materialia. 60: 2647-2655. DOI: 10.1016/J.Actamat.2012.01.031 |
0.293 |
|
2014 |
Jomaa W, Songmene V, Bocher P. Surface finish and residual stresses induced by orthogonal dry machining of AA7075-T651 Materials. 7: 1603-1624. DOI: 10.3390/ma7031603 |
0.292 |
|
2020 |
Dureau C, Novelli M, Arzaghi M, Massion R, Bocher P, Nadot Y, Grosdidier T. On the Influence of Ultrasonic Surface Mechanical Attrition Treatment (SMAT) on the Fatigue Behavior of the 304L Austenitic Stainless Steel Metals. 10: 100. DOI: 10.3390/met10010100 |
0.291 |
|
2016 |
Comot P, Bocher P, Belanger P. Ultrasonic guided wave inspection of Inconel 625 brazed lap joints Proceedings of Spie - the International Society For Optical Engineering. 9804. DOI: 10.1117/12.2216284 |
0.289 |
|
2015 |
Strano M, Marra A, Mussi V, Goletti M, Bocher P. Endurance of Damping Properties of Foam-Filled Tubes. Materials (Basel, Switzerland). 8: 4061-4079. PMID 28793425 DOI: 10.3390/Ma8074061 |
0.287 |
|
2005 |
Wanjara P, Monajati H, Jahazi M, Germain L, Bocher P, Immarigeon JP. Deformation processing and microstructural evolution in a near-alpha titanium alloy Materials Science and Technology. 3: 15-26. |
0.286 |
|
2020 |
Maurel P, Weiss L, Bocher P, Fleury E, Grosdidier T. Erratum: “Oxide dependent wear mechanisms of titanium against a steel counterface: Influence of SMAT nanostructured surface”, [Wear, (2019) 430–431, 245–255] Wear. 203087. DOI: 10.1016/J.Wear.2019.203087 |
0.283 |
|
2017 |
Tolouei E, Toroghinejad MR, Asgari H, Monajati Zadeh H, Ashrafizadeh F, Szpunar JA, Bocher P. Microstructure and Texture Development in Al-3%Brass Composite Produced through ARB Advanced Engineering Materials. 20: 1700463. DOI: 10.1002/Adem.201700463 |
0.272 |
|
2012 |
Anderson M, Bocher P, Gholipour J, Jahazi M, Savoie J, Wanjara P. Increasing the hydroformability of stainless steel 321 by multistep processing Steel Research International. 1243-1246. |
0.257 |
|
2005 |
Germain L, Gey N, Humbert M, Bocher P, Jahazi M. β→α s Variant selection in sharp hcp textured regions of a bimodal IMI834 billet Materials Science Forum. 495: 663-668. DOI: 10.4028/Www.Scientific.Net/Msf.495-497.663 |
0.257 |
|
1999 |
Bayle B, Bocher P, Jonas J, Montheillet F. Flow stress and recrystallisation during hot deformation of Cu–9%Sn alloys Materials Science and Technology. 15: 803-811. DOI: 10.1179/026708399101506445 |
0.246 |
|
2012 |
Hoseini M, Bridier F, Bocher P, Vali H, Szpunar JA. Thermal stability and grain growth behavior of ultrafine grained commercially pure titanium fabricated by equal channel angular pressing Ti 2011 - Proceedings of the 12th World Conference On Titanium. 1: 666-670. |
0.239 |
|
2013 |
Ansaripour A, Monajatizadeh H, Bocher P, Asefi D. Evaluation of recovery and recrystallization in cold rolled low carbon steel by magnetic hysteresis loop measurements Materials Science and Technology Conference and Exhibition 2013, Ms and T 2013. 1: 225-233. |
0.227 |
|
2009 |
Toubal L, Bocher P, Moreau A. Dwell-fatigue life of a near-alpha titanium alloy and ultrasonic measurement correlation 12th International Conference On Fracture 2009, Icf-12. 2: 1123-1128. |
0.226 |
|
2006 |
Arafin MA, Medraj M, Turner DP, Bocher P. Thermodynamic modeling and experimental investigation of brazed joints used in aerospace industry Proceedings of the 3rd International Brazing and Soldering Conference. 2006: 189-196. |
0.226 |
|
2009 |
Bocher P, Bridier F, Toubal L, Boutana N, Uta E, Gey N, Humbert M. Dwell-fatigue in near alpha titanium alloys: A multiscale, interdisciplinary challenge 12th International Conference On Fracture 2009, Icf-12. 2: 1481-1486. |
0.224 |
|
2012 |
Gey N, Bocher P, Uta E, Humbert M, Gilgert J. How texture and microtexture influence dwell fatigue lifetime in forged IMI834 titanium alloys Ti 2011 - Proceedings of the 12th World Conference On Titanium. 2: 879-882. |
0.223 |
|
2001 |
Le Gall R, Bocher P, Verlinden B, Jonas JJ. Effect of solutes on the dynamic recrystallization microstructure of nickel Journal De Physique. Iv : Jp. 11. |
0.222 |
|
2014 |
Jomaa W, Daoud M, Songmene V, Bocher P, Châtelain JF. Identification and validation of Marusich's constitutive law for finite element modeling of high speed machining Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 2. DOI: 10.1115/IMECE2014-39503 |
0.218 |
|
2013 |
Gariépy A, Larose S, Perron C, Bocher P, Lévesque M. Erratum to “On the effect of the peening trajectory in shot peen forming” [Finite Elem. Anal. Des. 69 (2013) 48–61] Finite Elements in Analysis and Design. 74: 111. DOI: 10.1016/J.Finel.2013.07.006 |
0.211 |
|
2011 |
Candeo A, Ducassy C, Bocher P, Dughiero F. Multiphysics modeling of induction hardening of ring gears for the aerospace industry Ieee Transactions On Magnetics. 47: 918-921. DOI: 10.1109/TMAG.2010.2073682 |
0.205 |
|
2017 |
Jomaa W, Mechri O, Lévesque J, Songmene V, Bocher P, Gakwaya A. Finite element simulation and analysis of serrated chip formation during high–speed machining of AA7075–T651 alloy Journal of Manufacturing Processes. 26: 446-458. DOI: 10.1016/J.JMAPRO.2017.02.015 |
0.194 |
|
2018 |
Khalifa M, Barka N, Brousseau J, Bocher P. Correction to: Sensitivity study of hardness profile of 4340 steel disc hardened by induction according to machine parameters and geometrical factors The International Journal of Advanced Manufacturing Technology. 101: 223-223. DOI: 10.1007/s00170-018-3050-2 |
0.193 |
|
2013 |
Shahriari D, Zolfaghari A, Jahazi M, Bocher P. Development of an expert system to characterize weld defects identified by ultrasonic testing American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) Pvp. 5. DOI: 10.1115/PVP2013-97783 |
0.187 |
|
2013 |
Paquin M, Thibault D, Bocher P, Verreman Y. Study on cold cracking test methods for low carbon soft-martensitic stainless steel flux cored arc welding Materials Science and Technology Conference and Exhibition 2013, Ms and T 2013. 1: 733-744. |
0.181 |
|
2020 |
Godin S, Hamel-Akré J, Thibault D, Serventi A, Bocher P. Ni and Mn enrichment effects on reformed austenite: thermodynamical and low cycle fatigue stability of 13%Cr–4%Ni and 13%Cr–6%Ni stainless steels Sn Applied Sciences. 2. DOI: 10.1007/s42452-020-2180-y |
0.16 |
|
2015 |
Strano M, Marra A, Mussi V, Goletti M, Bocher P. Endurance of damping properties of foam-filled tubes Materials. 8: 4061-4079. DOI: 10.3390/ma8074061 |
0.151 |
|
2013 |
Vanderesse N, Lagacé M, Bridier F, Bocher P. An Open Source Software for the Measurement of Deformation Fields by Means of Digital Image Correlation Microscopy and Microanalysis. 19: 820-821. DOI: 10.1017/S1431927613006090 |
0.12 |
|
2011 |
Quaintenne G, van Gils JA, Bocher P, Dekinga A, Piersma T. Scaling up ideals to freedom: Are densities of red knots across western Europe consistent with ideal free distribution? Proceedings of the Royal Society B: Biological Sciences. 278: 2728-2736. PMID 21325322 DOI: 10.1098/rspb.2011.0026 |
0.114 |
|
2013 |
Bridier F, Stinville J, Vanderesse N, Lagacé M, Bocher P. Measuring and Comparing Local Strain Field and Crystal Rotation at the Microscopic Scale Microscopy and Microanalysis. 19: 798-799. DOI: 10.1017/S1431927613005989 |
0.108 |
|
2012 |
Lucia M, Bocher P, Cosson RP, Churlaud C, Robin F, Bustamante P. Insight on trace element detoxification in the Black-tailed Godwit (Limosa limosa) through genetic, enzymatic and metallothionein analyses. The Science of the Total Environment. 423: 73-83. PMID 22421087 DOI: 10.1016/J.Scitotenv.2012.02.005 |
0.102 |
|
2010 |
Quaintenne G, Van Gils JA, Bocher P, Dekinga A, Piersma T. Diet selection in a molluscivore shorebird across Western Europe: Does it show short- or long-term intake rate-maximization? Journal of Animal Ecology. 79: 53-62. PMID 19674177 DOI: 10.1111/j.1365-2656.2009.01608.x |
0.101 |
|
2012 |
Lucia M, Bocher P, Cosson RP, Churlaud C, Bustamante P. Evidence of species-specific detoxification processes for trace elements in shorebirds Ecotoxicology. 21: 2349-2362. PMID 23001427 DOI: 10.1007/S10646-012-0991-3 |
0.098 |
|
2016 |
Philippe AS, Pinaud D, Cayatte ML, Goulevant C, Lachaussée N, Pineau P, Karpytchev M, Bocher P. Influence of environmental gradients on the distribution of benthic resources available for shorebirds on intertidal mudflats of Yves Bay, France Estuarine, Coastal and Shelf Science. 174: 71-81. DOI: 10.1016/j.ecss.2016.03.013 |
0.098 |
|
2012 |
Gagnon M, Tahan SA, Bocher P, Thibault D. The role of high cycle fatigue (HCF) onset in Francis runner reliability Iop Conference Series: Earth and Environmental Science. 15. DOI: 10.1088/1755-1315/15/2/022005 |
0.097 |
|
1994 |
Bocher P, De Meyer H, Vanden Berghe G. On Gregory- and modified Gregory-type corrections to Newton-Cotes quadrature Journal of Computational and Applied Mathematics. 50: 145-158. DOI: 10.1016/0377-0427(94)90296-8 |
0.09 |
|
2012 |
Bocher P, Quaintenne G, Delaporte P, Goulevant C, Deceuninck B, Caillot E. Distribution, phenology and long term trends of Red Knots Calidris canutus in France Wader Study Group Bulletin. 119: 17-25. |
0.085 |
|
2003 |
Alonzo F, Mayzaud P, Razouls S, Bocher P, Cherel Y. Seasonal changes in biomass, growth rates and production of subantarctic calanoid copepods in the Bay of Morbihan, Kerguelen Islands Marine Biology. 142: 525-536. |
0.08 |
|
2012 |
Bocher P, Quaintenne G, Robin F, Doumeret A, Delaporte P. Origins and age structure of Red Knot Calidris canutus staging and wintering on the Atlantic coast of France Journal of Ornithology. 153: 103-114. DOI: 10.1007/s10336-011-0702-5 |
0.08 |
|
2014 |
Lucia M, Bocher P, Chambosse M, Delaporte P, Bustamante P. Trace element accumulation in relation to trophic niches of shorebirds using intertidal mudflats Journal of Sea Research. 92: 134-143. DOI: 10.1016/J.Seares.2013.08.008 |
0.08 |
|
2010 |
Shamoun-Baranes J, Leyrer J, van Loon E, Bocher P, Robin F, Meunier F, Piersma T. Stochastic atmospheric assistance and the use of emergency staging sites by migrants. Proceedings. Biological Sciences / the Royal Society. 277: 1505-11. PMID 20071381 DOI: 10.1098/rspb.2009.2112 |
0.079 |
|
2001 |
Bocher P, Cherel Y, Labat JP, Mayzaud P, Razouls S, Jouventin P. Amphipod-based food web: Themisto gaudichaudii caught in nets and by seabirds in Kerguelen waters, southern Indian Ocean Marine Ecology Progress Series. 223: 261-276. |
0.077 |
|
2007 |
Bocher P, Piersma T, Dekinga A, Kraan C, Yates MG, Guyot T, Folmer EO, Radenac G. Site- and species-specific distribution patterns of molluscs at five intertidal soft-sediment areas in northwest Europe during a single winter Marine Biology. 151: 577-594. DOI: 10.1007/s00227-006-0500-4 |
0.076 |
|
2009 |
Compton TJ, Troost TA, Drent J, Kraan C, Bocher P, Leyrer J, Dekinga A, Piersma T. Repeatable sediment associations of burrowing bivalves across six European tidal flat systems Marine Ecology Progress Series. 382: 87-98. DOI: 10.3354/meps07964 |
0.074 |
|
1993 |
Vanden Berghe G, Bocher P, De Meyer H. Numerical solution of Fredholm equations based on mixed interpolation Applied Numerical Mathematics. 13: 15-22. DOI: 10.1016/0168-9274(93)90127-D |
0.073 |
|
2008 |
Compton TJ, Troost TA, Van Der Meer J, Kraan C, Honkoop PJC, Rogers DI, Pearson GB, De Goeij P, Bocher P, Lavaleye MSS, Leyrer J, Yates MG, Dekinga A, Piersma T. Distributional overlap rather than habitat differentiation characterizes co-occurrence of bivalves in intertidal soft sediment systems Marine Ecology Progress Series. 373: 25-35. DOI: 10.3354/meps07732 |
0.072 |
|
2014 |
Bocher P, Drouet S, Mahéo R, Drean-Quenec’hdu SL, Guyot T, Caillot E. Distribution, phenology and long-term trends of dunlin calidris alpina in France Wader Study Group Bulletin. 121: 23-32. |
0.072 |
|
2013 |
Saint-Béat B, Dupuy C, Bocher P, Chalumeau J, De Crignis M, Fontaine C, Guizien K, Lavaud J, Lefebvre S, Montanié H, Mouget JL, Orvain F, Pascal PY, Quaintenne G, Radenac G, et al. Key features of intertidal food webs that support migratory shorebirds. Plos One. 8: e76739. PMID 24204666 DOI: 10.1371/journal.pone.0076739 |
0.072 |
|
2000 |
Bocher P, Labidoire B, Cherel Y. Maximum dive depths of common diving petrels (Pelecanoides urinatrix) during the annual cycle at Mayes Island, Kerguelen Journal of Zoology. 251: 517-524. DOI: 10.1017/S0952836900008116 |
0.071 |
|
2011 |
Viain A, Corre F, Delaporte P, Joyeux E, Bocher P. Numbers, diet and feeding methods of common Shelduck Tadorna tadorna wintering in the estuarine bays of Aiguillon and Marennes-Oléron, Western France Wildfowl. 61: 121-141. |
0.07 |
|
2014 |
Quaintenne G, Bocher P, Ponsero A, Caillot E, Feunteun E. Contrasting Benthos Communities and Prey Selection by Red Knot Calidris canutus in Three Nearby Bays on the Channel Coast Ardea. 101: 87-98. DOI: 10.5253/078.101.0203 |
0.069 |
|
2013 |
Bocher P, Robin F, Deceuninck B, Caillot E. Distribution, phenology and long-term population trends in Blacktailed Godwits Limosa limosa wintering in coastal France Acta Ornithologica. 48: 141-150. DOI: 10.3161/000164513X678793 |
0.067 |
|
1994 |
Bocher P, De Meyer H, Vanden Berghe G. Numerical solution of volterra equations based on mixed interpolation Computers and Mathematics With Applications. 27: 1-11. DOI: 10.1016/0898-1221(94)90092-2 |
0.066 |
|
1994 |
Bocher P, de Meyer H, Vanden Berghe G. Modified gregory formulae based on mixed interpolation International Journal of Computer Mathematics. 52: 109-122. DOI: 10.1080/00207169408804295 |
0.064 |
|
1995 |
Bocher P, De Meyer H, Fack V, Vanden Berghe G. A parallel iterated correction algorithm for the numerical solution of Volterra equations Applied Numerical Mathematics. 17: 19-32. DOI: 10.1016/0168-9274(95)00009-J |
0.061 |
|
2014 |
Bocher P, Robin F, Kojadinovic J, Delaporte P, Rousseau P, Dupuy C, Bustamante P. Trophic resource partitioning within a shorebird community feeding on intertidal mudflat habitats Journal of Sea Research. 92: 115-124. DOI: 10.1016/J.Seares.2014.02.011 |
0.054 |
|
2015 |
Drumm DT, Jourde J, Bocher P. A new species of the genus Monokalliapseudes (Crustacea: Tanaidacea: Kalliapseudidae) from French Guiana Proceedings of the Biological Society of Washington. 128: 86-97. DOI: 10.2988/0006-324X-128.1.86 |
0.053 |
|
1996 |
De Meyer H, Bocher P, Fack V, Vanden Berghe G. A parallel fifth-order algorithm for the numerical solution of Volterra equations Journal of Computational and Applied Mathematics. 71: 115-124. DOI: 10.1016/0377-0427(95)00229-4 |
0.05 |
|
2003 |
Bustamante P, Bocher P, Chérel Y, Miramand P, Caurant F. Distribution of trace elements in the tissues of benthic and pelagic fish from the Kerguelen Islands Science of the Total Environment. 313: 25-39. PMID 12922058 DOI: 10.1016/S0048-9697(03)00265-1 |
0.049 |
|
2000 |
Bocher P, Cherel Y, Hobson KA. Complete trophic segregation between South Georgian and common diving petrels during breeding at Iles Kerguelen Marine Ecology Progress Series. 208: 249-264. |
0.047 |
|
2002 |
Bocher P, Cherel Y, Alonzo F, Razouls S, Labat JP, Mayzaud P, Jouventin P. Importance of the large copepod Paraeuchaeta antarctica (Giesbrecht, 1902) in coastal waters and the diet of seabirds at Kerguelen, Southern Ocean Journal of Plankton Research. 24: 1317-1333. DOI: 10.1093/plankt/24.12.1317 |
0.046 |
|
2018 |
Bocher P, Montijano JI, Rández L, Van Daele M. Explicit Runge–Kutta Methods for Stiff Problems with a Gap in Their Eigenvalue Spectrum Journal of Scientific Computing. 77: 1055-1083. DOI: 10.1007/s10915-018-0737-3 |
0.045 |
|
2013 |
Bocher P, Robin F, Meunier F, Delaporte P, Simon-Bouhet B. Origins and age structure of black-tailed god wits limosa limosa on the central atlantic coast of France Ardeola. 60: 225-243. DOI: 10.13157/arIa.60.2.2013225 |
0.042 |
|
2012 |
Adhikari K, Bou Kheir R, Greve MB, Bocher PK, Greve MH, Malone BP, Minasny B, McBratney AB. Progress towards GlobalSoilMap.net soil database of Denmark Digital Soil Assessments and Beyond - Proceedings of the Fifth Global Workshop On Digital Soil Mapping. 445-451. |
0.034 |
|
2010 |
Gagnon M, Tahan SA, Bocher P, Thibault D. Impact of startup scheme on Francis runner life expectancy Iop Conference Series: Earth and Environmental Science. 12: 012107. DOI: 10.1088/1755-1315/12/1/012107 |
0.034 |
|
2003 |
Bocher P, Caurant F, Miramand P, Cherel Y, Bustamante P. Influence of the diet on the bioaccumulation of heavy metals in zooplankton-eating petrels at Kerguelen archipelago, Southern Indian Ocean Polar Biology. 26: 759-767. DOI: 10.1007/S00300-003-0552-6 |
0.033 |
|
2013 |
Robin F, Piersma T, Meunier F, Bocher P. Expansion into an herbivorous niche by a customary carnivore : Black -tailed god wits feeding on rhizomes of zostera at a newly established wintering site Condor. 115: 340-347. DOI: 10.1525/cond.2013.120053 |
0.032 |
|
2002 |
Cherel Y, Bocher P, De Broyer C, Hobson KA. Food and feeding ecology of the sympatric thin-billed Pachyptila belcheri and Antarctic P. desolata prions at Iles Kerguelen, Southern Indian Ocean Marine Ecology Progress Series. 228: 263-281. |
0.03 |
|
2002 |
Cherel Y, Bocher P, Trouvé C, Weimerskirch H. Diet and feeding ecology of blue petrels Halobaena caerulea at Iles Kerguelen, Southern Indian Ocean Marine Ecology Progress Series. 228: 283-299. |
0.027 |
|
2013 |
Thomas S, Willems K, Van den Daelen L, Linden P, Ciocci MC, Bocher P. The M6-C Cervical Disc Prosthesis: First Clinical Experience In 33 Patients. Journal of Spinal Disorders & Techniques. PMID 24136048 DOI: 10.1097/BSD.0000000000000025 |
0.019 |
|
2015 |
Catry T, Lourenço PM, Lopes RJ, Bocher P, Carneiro C, Alves JA, Delaporte P, Bearhop S, Piersma T, Granadeiro JP. Use of stable isotope fingerprints to assign wintering origin and trace shorebird movements along the East Atlantic Flyway Basic and Applied Ecology. DOI: 10.1016/j.baae.2015.10.005 |
0.01 |
|
Hide low-probability matches. |