Year |
Citation |
Score |
2013 |
Dubrawski K, Tebianian S, Bi HT, Chaouki J, Ellis N, Gerspacher R, Jafari R, Kantzas A, Lim C, Patience GS, Pugsley T, Qi MZ, Zhu JX, Grace JR. Traveling column for comparison of invasive and non-invasive fluidization voidage measurement techniques Powder Technology. 235: 203-220. DOI: 10.1016/J.Powtec.2012.10.031 |
0.376 |
|
2012 |
Karimipour S, Pugsley T. Application of the particle in cell approach for the simulation of bubbling fluidized beds of Geldart A particles Powder Technology. 220: 63-69. DOI: 10.1016/J.Powtec.2011.09.026 |
0.697 |
|
2012 |
Granovskii M, Gerspacher R, Pugsley T, Sanchez F. An effect of tar model compound toluene treatment with high-temperature flames Fuel. 92: 369-372. DOI: 10.1016/J.Fuel.2011.08.004 |
0.353 |
|
2011 |
Karimipour S, Pugsley T. A critical evaluation of literature correlations for predicting bubble size and velocity in gas-solid fluidized beds Powder Technology. 205: 1-14. DOI: 10.1016/J.Powtec.2010.09.016 |
0.723 |
|
2011 |
Soni CG, Dalai AK, Pugsley T, Fonstad T. Steam gasification of meat and bone meal in a two-stage fixed-bed reactor system Asia-Pacific Journal of Chemical Engineering. 6: 71-77. DOI: 10.1002/Apj.454 |
0.377 |
|
2010 |
Karimipour S, Pugsley T. Study of gas streaming in a deep fluidized bed containing Geldart's Group A particles Chemical Engineering Science. 65: 3508-3517. DOI: 10.1016/J.Ces.2010.02.045 |
0.733 |
|
2010 |
Karimipour S, Pugsley T. Experimental study of the nature of gas streaming in deep fluidized beds of Geldart a particles Chemical Engineering Journal. 162: 388-395. DOI: 10.1016/J.Cej.2010.05.040 |
0.733 |
|
2010 |
Clarke K, Pugsley T, Hill GA. The use of peat granules in a fluidized bed bioreactor Canadian Journal of Chemical Engineering. 88: 217-223. DOI: 10.1002/Cjce.20269 |
0.559 |
|
2009 |
Wormsbecker M, Pugsley T. Distributor induced hydrodynamics in a conical fluidized bed dryer Drying Technology. 27: 797-804. DOI: 10.1080/07373930902901588 |
0.494 |
|
2009 |
Wormsbecker M, Pugsley T, Van Ommen JR, Nijenhuis J, Mudde R. Effect of distributor design on the bottom zone hydrodynamics in a fluidized bed dryer using 1-D X-ray densitometry imaging Industrial and Engineering Chemistry Research. 48: 7004-7015. DOI: 10.1021/Ie900025N |
0.39 |
|
2009 |
Wormsbecker M, van Ommen R, Nijenhuis J, Tanfara H, Pugsley T. The influence of vessel geometry on fluidized bed dryer hydrodynamics Powder Technology. 194: 115-125. DOI: 10.1016/J.Powtec.2009.03.036 |
0.422 |
|
2009 |
Soni CG, Wang Z, Dalai AK, Pugsley T, Fonstad T. Hydrogen production via gasification of meat and bone meal in two-stage fixed bed reactor system Fuel. 88: 920-925. DOI: 10.1016/J.Fuel.2008.10.037 |
0.36 |
|
2009 |
Wormsbecker M, Pugsley T, Tanfara H. Interpretation of the hydrodynamic behaviour in a conical fluidized bed dryer Chemical Engineering Science. 64: 1739-1746. DOI: 10.1016/J.Ces.2008.11.025 |
0.521 |
|
2009 |
Clarke K, Pugsley T, Hill GA. Gas-solid packed and fluidized bed models for bioremediation of volatile organic compounds in air Biochemical Engineering Journal. 46: 34-43. DOI: 10.1016/J.Bej.2009.04.009 |
0.457 |
|
2008 |
Clarke K, Hill GA, Pugsley T. Improved VOC bioremediation using a fluidized bed peat bioreactor Process Safety and Environmental Protection. 86: 283-290. DOI: 10.1016/J.Psep.2008.04.002 |
0.415 |
|
2008 |
Wormsbecker M, Pugsley T. The influence of moisture on the fluidization behaviour of porous pharmaceutical granule Chemical Engineering Science. 63: 4063-4069. DOI: 10.1016/J.Ces.2008.05.023 |
0.417 |
|
2008 |
Khanna P, Pugsley T, Tanfara H, Dumont H. Radioactive particle tracking in a lab-scale conical fluidized bed dryer containing pharmaceutical granule Canadian Journal of Chemical Engineering. 86: 563-570. DOI: 10.1002/Cjce.20073 |
0.454 |
|
2008 |
Cruz E, Pugsley T. Computational fluid dynamics model of a circulating fluidized bed lignite coal combustor Cfb 2008 - Proceedings of the 9th Int. Conference On Circulating Fluidized Beds, in Conjunction With the 4th International Vgb Workshop "Operating Experience With Fluidized Bed Firing Systems",. |
0.377 |
|
2007 |
Pugsley T, Chaplin G, Khanna P. Application of advanced measurement techniques to conical lab-scale fluidized bed dryers containing pharmaceutical granule Food and Bioproducts Processing. 85: 273-283. DOI: 10.1205/Fbp07022 |
0.418 |
|
2007 |
Clarke K, Hill GA, Pugsley TS. Direct comparison of fluidized and packed bed bioreactors for bioremediation of an air pollutant International Journal of Chemical Reactor Engineering. 5. |
0.306 |
|
2006 |
Wiens J, Pugsley T. Tomographic imaging of a conical fluidized bed of dry pharmaceutical granule Powder Technology. 169: 49-59. DOI: 10.1016/J.Powtec.2006.07.022 |
0.559 |
|
2006 |
Sharma SD, Pugsley T, Delatour R. Three-dimensional CFD model of the deaeration rate of FCC particles Aiche Journal. 52: 2391-2400. DOI: 10.1002/Aic.10858 |
0.528 |
|
2005 |
Chaplin G, Pugsley T, Winters C. Monitoring the fluidized bed granulation process based on S-statistic analysis of a pressure time series. Aaps Pharmscitech. 6: E198-201. PMID 16353978 DOI: 10.1208/Pt060229 |
0.367 |
|
2005 |
Wormsbecker M, Adams A, Pugsley T, Winters C. Segregation by size difference in a conical fluidized bed of pharmaceutical granulate Powder Technology. 153: 72-80. DOI: 10.1016/J.Powtec.2005.02.006 |
0.587 |
|
2005 |
Chaplin G, Pugsley T, Winters C. The S-statistic as an early warning of entrainment in a fluidized bed dryer containing pharmaceutical granule Powder Technology. 149: 148-156. DOI: 10.1016/J.Powtec.2004.11.002 |
0.345 |
|
2005 |
Chaplin G, Pugsley T. Application of electrical capacitance tomography to the fluidized bed drying of pharmaceutical granule Chemical Engineering Science. 60: 7022-7033. DOI: 10.1016/J.Ces.2005.06.029 |
0.365 |
|
2005 |
Clarke KL, Pugsley T, Hill GA. Fluidization of moist sawdust in binary particle systems in a gas-solid fluidized bed Chemical Engineering Science. 60: 6909-6918. DOI: 10.1016/J.Ces.2005.06.004 |
0.493 |
|
2004 |
Chaplin G, Pugsley T, Winters C. Application of chaos analysis to pressure fluctuation data from a fluidized bed dryer containing pharmaceutical granule Powder Technology. 142: 110-120. DOI: 10.1016/J.Powtec.2004.05.001 |
0.489 |
|
2004 |
Berry TA, McKeen TR, Pugsley TS, Dalai AK. Two-dimensional reaction engineering model of the riser section of a fluid catalytic cracking unit Industrial and Engineering Chemistry Research. 43: 5571-5581. |
0.301 |
|
2003 |
McKeen T, Pugsley TS. Simulation of Cold Flow FCC Stripper Hydrodynamics at Small Scale Using Computational Fluid Dynamics International Journal of Chemical Reactor Engineering. 1. DOI: 10.2202/1542-6580.1034 |
0.313 |
|
2003 |
McKeen T, Pugsley T. Simulation and experimental validation of a freely bubbling bed of FCC catalyst Powder Technology. 129: 139-152. DOI: 10.1016/S0032-5910(02)00294-2 |
0.527 |
|
2002 |
Tanfara H, Pugsley T, Winters C. Effect of particle size distribution on local voidage in a bench-scale conical fluidized bed dryer Drying Technology. 20: 1273-1289. DOI: 10.1081/Drt-120004051 |
0.588 |
|
2002 |
Malcus S, Cruz E, Rowe C, Pugsley TS. Radial solid mass flux profiles in a high-suspension density circulating fluidized bed Powder Technology. 125: 5-9. DOI: 10.1016/S0032-5910(01)00492-2 |
0.347 |
|
2001 |
Malcus S, Pugsley T. Lateral flux and velocity of FCC particles in a CFB riser Canadian Journal of Chemical Engineering. 79: 548-556. DOI: 10.1002/Cjce.5450790412 |
0.462 |
|
2000 |
Malcus S, Chaplin G, Pugsley T. The hydrodynamics of the high-density bottom zone in a CFB riser analyzed by means of electrical capacitance tomography (ECT) Chemical Engineering Science. 55: 4129-4138. DOI: 10.1016/S0009-2509(00)00083-X |
0.312 |
|
1996 |
Pugsley TS, Berruti F. A predictive hydrodynamic model for circulating fluidized bed risers Powder Technology. 89: 57-69. DOI: 10.1016/S0032-5910(96)03154-3 |
0.43 |
|
1996 |
Pugsley TS, Milne BJ, Berruti F. An innovative non-mechanical solids feeder for high solids mass fluxes in circulating fluidized bed risers Powder Technology. 88: 123-131. DOI: 10.1016/0032-5910(96)03118-X |
0.344 |
|
1996 |
Pugsley TS, Berruti F. The circulating fluidized bed catalytic reactor: Reactor model validation and simulation of the oxidative coupling of methane Chemical Engineering Science. 51: 2751-2756. |
0.307 |
|
1996 |
Kimm NK, Berruti F, Pugsley TS. Modeling the hydrodynamics of downflow gas-solids reactors Chemical Engineering Science. 51: 2661-2666. |
0.446 |
|
1995 |
Berruti F, Pugsley TS, Godfroy L, Chaouki J, Patience GS. Hydrodynamics of circulating fluidized bed risers: A review The Canadian Journal of Chemical Engineering. 73: 579-602. DOI: 10.1002/Cjce.5450730502 |
0.397 |
|
1992 |
Wong R, Pugsley T, Berrut F. Modelling the axial voidage profile and flow structure in risers of circulating fluidized beds Chemical Engineering Science. 47: 2301-2306. DOI: 10.1016/0009-2509(92)87051-Q |
0.367 |
|
Show low-probability matches. |