Year |
Citation |
Score |
2018 |
Akram J, Chalavadi P, Pal D, Stucker B. Understanding grain evolution in additive manufacturing through modeling Additive Manufacturing. 21: 255-268. DOI: 10.1016/J.Addma.2018.03.021 |
0.396 |
|
2017 |
Teng C, Gong H, Szabo A, Dilip JJS, Ashby K, Zhang S, Patil N, Pal D, Stucker B. Simulating melt pool shape and lack of fusion porosity for selective laser melting of cobalt chromium components Journal of Manufacturing Science and Engineering, Transactions of the Asme. 139. DOI: 10.1115/1.4034137 |
0.498 |
|
2017 |
Dilip JJS, Miyanaji H, Lassell A, Starr TL, Stucker B. A novel method to fabricate TiAl intermetallic alloy 3D parts using additive manufacturing Defence Technology. 13: 72-76. DOI: 10.1016/J.Dt.2016.08.001 |
0.383 |
|
2017 |
Dilip JJS, Ram GDJ, Starr TL, Stucker B. Selective laser melting of HY100 steel: Process parameters, microstructure and mechanical properties Additive Manufacturing. 13: 49-60. DOI: 10.1016/J.Addma.2016.11.003 |
0.409 |
|
2017 |
Teng C, Pal D, Gong H, Zeng K, Briggs K, Patil N, Stucker B. A review of defect modeling in laser material processing Additive Manufacturing. 14: 137-147. DOI: 10.1016/J.Addma.2016.10.009 |
0.412 |
|
2016 |
Teng C, Ashby K, Phan N, Pal D, Stucker B. The effects of material property assumptions on predicted meltpool shape for laser powder bed fusion based additive manufacturing Measurement Science and Technology. 27. DOI: 10.1088/0957-0233/27/8/085602 |
0.399 |
|
2015 |
Zeng K, Pal D, Gong HJ, Patil N, Stucker B. Comparison of 3DSIM thermal modelling of selective laser melting using new dynamic meshing method to ANSYS Materials Science and Technology (United Kingdom). 31: 945-956. DOI: 10.1179/1743284714Y.0000000703 |
0.374 |
|
2015 |
Patil N, Pal D, Teng C, Zeng K, Sublette T, Stucker B. A study of transverse laser modes using a novel multi-scale simulation architecture for laser-based manufacturing technologies Proceedings of Spie - the International Society For Optical Engineering. 9353. DOI: 10.1117/12.2077284 |
0.373 |
|
2015 |
Patil N, Pal D, Rafi HK, Zeng K, Moreland A, Hicks A, Beeler D, Stucker B. A Generalized Feed Forward Dynamic Adaptive Mesh Refinement and Derefinement Finite Element Framework for Metal Laser Sintering - Part I: Formulation and Algorithm Development Journal of Manufacturing Science and Engineering, Transactions of the Asme. 137. DOI: 10.1115/1.4030059 |
0.385 |
|
2015 |
Gong H, Rafi K, Gu H, Janaki Ram GD, Starr T, Stucker B. Influence of defects on mechanical properties of Ti-6Al-4V components produced by selective laser melting and electron beam melting Materials and Design. 86: 545-554. DOI: 10.1016/J.Matdes.2015.07.147 |
0.331 |
|
2015 |
Yang L, Harrysson O, Cormier D, West H, Gong H, Stucker B. Additive Manufacturing of Metal Cellular Structures: Design and Fabrication Jom. 67: 608-615. DOI: 10.1007/S11837-015-1322-Y |
0.426 |
|
2015 |
Pal D, Patil N, Zeng K, Teng C, Stucker B. An Efficient Multi-Scale Simulation Architecture for the Prediction of Performance Metrics of Parts Fabricated Using Additive Manufacturing Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 3852-3863. DOI: 10.1007/S11661-015-2903-7 |
0.401 |
|
2014 |
Pal D, Patil N, Zeng K, Stucker B. An Integrated Approach to Additive Manufacturing Simulations Using Physics Based, Coupled Multiscale Process Modeling Journal of Manufacturing Science and Engineering, Transactions of the Asme. 136. DOI: 10.1115/1.4028580 |
0.478 |
|
2014 |
Gong H, Rafi K, Gu H, Starr T, Stucker B. Analysis of defect generation in Ti-6Al-4V parts made using powder bed fusion additive manufacturing processes Additive Manufacturing. 1: 87-98. DOI: 10.1016/J.Addma.2014.08.002 |
0.4 |
|
2014 |
Obielodan J, Stucker B. A fabrication methodology for dual-material engineering structures using ultrasonic additive manufacturing International Journal of Advanced Manufacturing Technology. 70: 277-284. DOI: 10.1007/S00170-013-5266-5 |
0.335 |
|
2013 |
Pal D, Stucker B. A study of subgrain formation in Al 3003 H-18 foils undergoing ultrasonic additive manufacturing using a dislocation density based crystal plasticity finite element framework Journal of Applied Physics. 113. DOI: 10.1063/1.4807831 |
0.392 |
|
2013 |
Obielodan J, Stucker B. Characterization of LENS-fabricated Ti6Al4V and Ti6Al4V/TiC dual-material transition joints International Journal of Advanced Manufacturing Technology. 66: 2053-2061. DOI: 10.1007/S00170-012-4481-9 |
0.409 |
|
2013 |
Patil N, Pal D, Stucker B. A new finite element solver using numerical Eigen modes for fast simulation of additive manufacturing processes 24th International Sff Symposium - An Additive Manufacturing Conference, Sff 2013. 535-548. |
0.348 |
|
2013 |
Anam MA, Pal D, Stucker B. Modeling and experimental validation of nickel-based super alloy (Inconel 625) made using Selective Laser Melting 24th International Sff Symposium - An Additive Manufacturing Conference, Sff 2013. 463-473. |
0.334 |
|
2013 |
Pal D, Patil N, Nikoukar M, Zeng K, Kutty KH, Stucker BE. An integrated approach to cyber-enabled additive manufacturing using physics based, coupled multi-scale process modeling 24th International Sff Symposium - An Additive Manufacturing Conference, Sff 2013. 1-18. |
0.403 |
|
2012 |
Gonzalez R, Stucker B. Experimental determination of optimum parameters for stainless steel 316L annealed ultrasonic consolidation Rapid Prototyping Journal. 18: 172-183. DOI: 10.1108/13552541211212159 |
0.342 |
|
2011 |
Choi JW, Medina F, Kim C, Espalin D, Rodriguez D, Stucker B, Wicker R. Development of a mobile fused deposition modeling system with enhanced manufacturing flexibility Journal of Materials Processing Technology. 211: 424-432. DOI: 10.1016/J.Jmatprotec.2010.10.019 |
0.387 |
|
2010 |
Gibson I, Rosen DW, Stucker B. Additive manufacturing technologies: Rapid prototyping to direct digital manufacturing Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing. 1-459. DOI: 10.1007/978-1-4419-1120-9 |
0.354 |
|
2010 |
Obielodan JO, Stucker BE. Determination of the optimum joint design for LENS fabricated Ti6Al4V and Ti6Al4V/TiC dual-material structures 21st Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, Sff 2010. 332-361. |
0.304 |
|
2009 |
Salmon S, Swank M, Janaki Ram GD, Stucker BE, Palmer JA. Effectiveness of epoxy staking of fasteners in aerospace applications Assembly Automation. 29: 341-347. DOI: 10.1108/01445150910987754 |
0.311 |
|
2009 |
Hernandez LA, Stucker B. Integration & process planning for combined ultrasonic consolidation and direct write 20th Annual International Solid Freeform Fabrication Symposium, Sff 2009. 129-147. |
0.302 |
|
2006 |
Qu X, Stucker B. Raster milling tool-path generation from STL files Rapid Prototyping Journal. 12: 4-11. DOI: 10.1108/13552540610637219 |
0.607 |
|
2006 |
George J, Stucker B. Fabrication of lightweight structural panels through ultrasonic consolidation Virtual and Physical Prototyping. 1: 227-241. DOI: 10.1080/17452750601106799 |
0.344 |
|
2006 |
Janaki Ram GD, Yang Y, Stucker BE. Effect of process parameters on bond formation during ultrasonic consolidation of aluminum alloy 3003 Journal of Manufacturing Systems. 25: 221-238. DOI: 10.1016/S0278-6125(07)80011-2 |
0.373 |
|
2006 |
Janaki Ram GD, Yang Y, George J, Robinson C, Stucker BE. Improving linear weld density in ultrasonically consolidated parts 17th Solid Freeform Fabrication Symposium, Sff 2006. 692-708. |
0.333 |
|
2005 |
Qu X, Stucker B. Circular hole recognition for STL-based toolpath generation Rapid Prototyping Journal. 11: 132-139. DOI: 10.1108/13552540510601255 |
0.562 |
|
2005 |
Quincieu J, Robinson C, Stucker B, Mosher T. Case study: Selective laser sintering of the USUSat II small satellite structure Assembly Automation. 25: 267-272. DOI: 10.1108/01445150510626389 |
0.439 |
|
2004 |
Giri D, Jouaneh M, Stucker B. Error sources in a 3-D reverse engineering process Precision Engineering. 28: 242-251. DOI: 10.1016/J.Precisioneng.2003.08.004 |
0.344 |
|
2003 |
Stucker B, Qu X. A finish machining strategy for rapid manufactured parts and tools Rapid Prototyping Journal. 9: 194-200. DOI: 10.1108/13552540310489578 |
0.649 |
|
2003 |
Qu X, Stucker B. A 3D surface offset method for STL-format models Rapid Prototyping Journal. 9: 133-141. DOI: 10.1108/13552540310477436 |
0.526 |
|
2000 |
Eppich RE, Hardro PJ, Stucker BE. Rapid tooling for the die casting industry Die Casting Engineer. 44: 30-38. |
0.57 |
|
1999 |
Norasetthekul S, Eubank PT, Bradley WL, Bozkurt B, Stucker B. Use of zirconium diboride-copper as an electrode in plasma applications Journal of Materials Science. 34: 1261-1270. DOI: 10.1023/A:1004529527162 |
0.318 |
|
1999 |
Hardro PJ, Wang JH, Stucker BE. Determining the parameter settings and capability of a rapid prototyping process International Journal of Industrial Engineering : Theory Applications and Practice. 6: 203-213. |
0.575 |
|
Show low-probability matches. |