Year |
Citation |
Score |
2018 |
Panpun C, Plookphol T, Janudom S. Creep of Slurry Squeeze-Cast ZA-27 Zinc Alloy with Different Solid Fractions at 140 °C Materials Science Forum. 928: 194-199. DOI: 10.4028/Www.Scientific.Net/Msf.928.194 |
0.473 |
|
2018 |
Sungkhaphaitoon P, Plookphol T. The Effects of Antimony Addition on the Microstructural, Mechanical, and Thermal Properties of Sn-3.0Ag-0.5Cu Solder Alloy Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 49: 652-660. DOI: 10.1007/S11661-017-4439-5 |
0.452 |
|
2017 |
Chantaramanee S, Sungkhaphaitoon P, Plookphol T. Influence of Indium and Antimony Additions on Mechanical Properties and Microstructure of Sn-3.0Ag-0.5Cu Lead Free Solder Alloys Solid State Phenomena. 266: 196-200. DOI: 10.4028/Www.Scientific.Net/Ssp.266.196 |
0.372 |
|
2017 |
Sungkhaphaitoon P, Wisutmethangoon S, Plookphol T. Influence of Process Parameters on Zinc Powder Produced by Centrifugal Atomisation Materials Research-Ibero-American Journal of Materials. 20: 718-724. DOI: 10.1590/1980-5373-Mr-2015-0674 |
0.37 |
|
2017 |
Shi K, Wisutmethangoon S, Janudom S, Plookphol T. Variation of microstructure and mechanical property of slurry die cast Al-Si-Mg-Fe alloy International Journal of Cast Metals Research. 30: 180-190. DOI: 10.1080/13640461.2017.1286551 |
0.436 |
|
2016 |
Vongcharoenpon S, Janudom S, Plookphol T. Heat Treatment of a Slurry Squeeze-Cast ZA-27 Alloy at 150 °C Materials Science Forum. 867: 14-18. DOI: 10.4028/Www.Scientific.Net/Msf.867.14 |
0.386 |
|
2016 |
Sungkhaphaitoon P, Plookphol T. Effect of Cooling Rate on the Microstructure and Mechanical Properties of Sn-0.7wt.%Cu Solder Alloy Key Engineering Materials. 513-516. DOI: 10.4028/Www.Scientific.Net/Kem.675-676.513 |
0.426 |
|
2016 |
Cooper RF, Stone DS, Plookphol T. Load relaxation of olivine single crystals Journal of Geophysical Research. 121: 7193-7210. DOI: 10.1002/2016Jb013425 |
0.619 |
|
2015 |
Jumpol W, Wannasin J, Janudom S, Canyook R, Plookphol T, Wisutmethangoon S. Effects of Solid Fractions in a Slurry Die Casting Process on Defects of 7075 Aluminum Alloy Applied Mechanics and Materials. 7-10. DOI: 10.4028/Www.Scientific.Net/Amm.752-753.7 |
0.42 |
|
2015 |
Umudee N, Wannasin J, Janudom S, Canyook R, Plookphol T, Wisutmethangoon S. Study of Surface Segregation Defect of 7075 Aluminum Alloy in Semi-Solid Squeeze Casting Applied Mechanics and Materials. 3-6. DOI: 10.4028/Www.Scientific.Net/Amm.752-753.3 |
0.366 |
|
2014 |
Rattanadakul S, Wannasin J, Janudom S, Plookphol T, Wisutmethangoon S. Effects of Solid Fractions in a Slurry Casting Process on Shrinkage and Microstructure of 7075 Aluminum Alloy Advanced Materials Research. 968: 125-128. DOI: 10.4028/Www.Scientific.Net/Amr.968.125 |
0.373 |
|
2014 |
Sangchan A, Plookphol T, Wannasin J, Wisutmethangoon S. Effect of Strontium on Microstructure and Mechanical Properties of Semi-Solid A356 Al Alloy Advanced Materials Research. 893: 353-356. DOI: 10.4028/Www.Scientific.Net/Amr.893.353 |
0.457 |
|
2014 |
Mahathaninwong N, Wisutmethangoon S, Plookphol T, Wannasin J, Chantaramanee S. Elevated Temperature Tensile Behavior of Rheo-Cast 7075-T6 Al Alloy Produced by GISS Technique Advanced Materials Research. 1597-1600. DOI: 10.4028/Www.Scientific.Net/Amr.881-883.1597 |
0.45 |
|
2014 |
Shi KR, Wisutmethangoon S, Wannasin J, Plookphol T. Tensile Properties of Semi-Solid Die Cast AC4C Aluminum Alloy Applied Mechanics and Materials. 680: 11-14. DOI: 10.4028/Www.Scientific.Net/Amm.680.11 |
0.444 |
|
2014 |
Songkuea S, Sripan P, Wisutmethangoon S, Wannasin J, Plookphol T. Tensile Properties and Plasticity of Semi-Solid Cast 6061 Al Alloy at Elevated Temperatures Applied Mechanics and Materials. 366-370. DOI: 10.4028/Www.Scientific.Net/Amm.496-500.366 |
0.487 |
|
2014 |
Khunbanterng N, Wisutmethangoon S, Plookphol T, Wannasin J. Effect of Sr Addition on Microstructure and Mechanical Properties of Semi-Solid 2024 Al Alloys Applied Mechanics and Materials. 336-339. DOI: 10.4028/Www.Scientific.Net/Amm.496-500.336 |
0.462 |
|
2013 |
Sungkhaphaitoon P, Sangsai N, Wisutmethangoon S, Plookphol T. Paraffin Wax Powder Production by Ultrasonic Atomization Applied Mechanics and Materials. 378: 145-149. DOI: 10.4028/Www.Scientific.Net/Amm.378.145 |
0.389 |
|
2013 |
Thongkam S, Wisutmethangoon S, Wannasin J, Chantaramanee S, Plookphol T. Creep of Rheocast 7075 Aluminum Alloy at 300 °C Applied Mechanics and Materials. 372: 288-291. DOI: 10.4028/Www.Scientific.Net/Amm.372.288 |
0.476 |
|
2013 |
Chantaramanee S, Wisutmethangoon S, Sikong L, Plookphol T. Wettability of Carbon Nanotubes with Molten Sn-Ag-Cu Solder Alloy Applied Mechanics and Materials. 372: 136-142. DOI: 10.4028/Www.Scientific.Net/Amm.372.136 |
0.336 |
|
2013 |
Pajaroen N, Plookphol T, Wannasin J, Wisutmethangoon S. Influence of Solution Heat Treatment Temperature and Time on the Microstructure and Mechanical Properties of Gas Induced Semi-Solid (GISS) 6061 Aluminum Alloy Applied Mechanics and Materials. 67-71. DOI: 10.4028/Www.Scientific.Net/Amm.313-314.67 |
0.427 |
|
2013 |
Chantaramanee S, Wisutmethangoon S, Sikong L, Plookphol T. Development of a lead-free composite solder from Sn–Ag–Cu and Ag-coated carbon nanotubes Journal of Materials Science: Materials in Electronics. 24: 3707-3715. DOI: 10.1007/S10854-013-1307-Y |
0.374 |
|
2012 |
Sungkhaphaitoon P, Plookphol T, Wisutmethangoon S. Design and Development of a Centrifugal Atomizer for Producing Zinc Metal Powder International Journal of Applied Physics and Mathematics. 77-82. DOI: 10.7763/Ijapm.2012.V2.58 |
0.367 |
|
2012 |
Sungkhaphaitoon P, Plookphol T, Wisutmethangoon S. Centrifugal Atomization of Zinc Metal Powder for Friction Materials Application Advanced Materials Research. 281-285. DOI: 10.4028/Www.Scientific.Net/Amr.488-489.281 |
0.374 |
|
2012 |
Kongiang S, Plookphol T, Wannasin J, Wisutmethangoon S. Effect of the Two-Step Solution Heat Treatment on the Microstructure of Semisolid Cast 7075 Aluminum Alloy Advanced Materials Research. 243-247. DOI: 10.4028/Www.Scientific.Net/Amr.488-489.243 |
0.409 |
|
2012 |
Sungkhaphaitoon P, Likhidkan W, Kitjaidiaw S, Wisutmethangoon S, Plookphol T. Effect of Atomizer Disc Geometry on Zinc Metal Powder Production by Centrifugal Atomization Applied Mechanics and Materials. 232-236. DOI: 10.4028/Www.Scientific.Net/Amm.271-272.232 |
0.342 |
|
2012 |
Mahathaninwong N, Zhou Y, Babcock SE, Plookphol T, Wannasin J, Wisutmethangoon S. Creep rupture behavior of semi-solid cast 7075-T6 Al alloy Materials Science and Engineering A. 556: 107-113. DOI: 10.1016/J.Msea.2012.06.064 |
0.458 |
|
2012 |
Wisutmethangoon S, Thongjan S, Mahathaninwong N, Plookphol T, Wannasin J. Precipitation hardening of A356 Al alloy produced by gas induced semi-solid process Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 532: 610-615. DOI: 10.1016/J.Msea.2011.11.026 |
0.469 |
|
2012 |
Mahathaninwong N, Plookphol T, Wannasin J, Wisutmethangoon S. T6 heat treatment of rheocasting 7075 Al alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 532: 91-99. DOI: 10.1016/J.Msea.2011.10.068 |
0.466 |
|
2011 |
Pannaray S, Wisutmethangoon S, Plookphol T, Wannasin J. Microstructure Evolution during Solution Heat Treatment of Semisolid Cast 2024 Aluminum Alloy Advanced Materials Research. 339: 714-717. DOI: 10.4028/Www.Scientific.Net/Amr.339.714 |
0.425 |
|
2011 |
Mahathaninwong N, Wisutmethangoon S, Plookphol T, Wannasin J. Influence of Solution Heat Treatment on Microstructures of Semisolid Cast 7075 Aluminium Alloy Advanced Materials Research. 339: 371-374. DOI: 10.4028/Www.Scientific.Net/Amr.339.371 |
0.427 |
|
2011 |
Plookphol T, Wisutmethangoon S, Gonsrang S. Influence of process parameters on SAC305 lead-free solder powder produced by centrifugal atomization Powder Technology. 214: 506-512. DOI: 10.1016/J.Powtec.2011.09.015 |
0.35 |
|
2011 |
Wisutmethangoon S, Plookphol T, Sungkhaphaitoon P. Production of SAC305 powder by ultrasonic atomization Powder Technology. 209: 105-111. DOI: 10.1016/J.Powtec.2011.02.016 |
0.37 |
|
2004 |
Stone DS, Plookphol T, Cooper RF. Similarity and scaling in creep and load relaxation of single-crystal halite (NaCl) Journal of Geophysical Research B: Solid Earth. 109: 1-17. DOI: 10.1029/2004Jb003064 |
0.627 |
|
Show low-probability matches. |