| Year |
Citation |
Score |
| 2022 |
Sabban R, Dash K, Suwas S, Murty BS. Strength-Ductility Synergy in High Entropy Alloys by Tuning the Thermo-Mechanical Process Parameters: A Comprehensive Review. Journal of the Indian Institute of Science. 1-26. PMID 35345876 DOI: 10.1007/s41745-022-00299-9 |
0.358 |
|
| 2021 |
Chawake N, Raman L, Ramasamy P, Ghosh P, Spieckermann F, Gammer C, Murty BS, Kottada RS, Eckert J. Composite of medium entropy alloys synthesized using spark plasma sintering Scripta Materialia. 191: 46-51. DOI: 10.1016/J.Scriptamat.2020.09.015 |
0.511 |
|
| 2021 |
Raman L, Anupam A, Karthick G, Berndt CC, Ang ASM, Narayana Murty SVS, Fabijanic D, Murty BS, Kottada RS. Strengthening mechanisms in CrMoNbTiW refractory high entropy alloy Materials Science and Engineering: A. 819: 141503. DOI: 10.1016/J.MSEA.2021.141503 |
0.407 |
|
| 2021 |
Parakh A, Vaidya M, Kumar N, Chetty R, Murty B. Effect of crystal structure and grain size on corrosion properties of AlCoCrFeNi high entropy alloy Journal of Alloys and Compounds. 863: 158056. DOI: 10.1016/j.jallcom.2020.158056 |
0.375 |
|
| 2020 |
Muralikrishna GM, Esther ACM, Guruvidyathri K, Watermeyer P, Liebscher CH, Kulkarni KN, Wilde G, Divinski SV, Murty BS. Novel Multicomponent B2-Ordered Aluminides: Compositional Design, Synthesis, Characterization, and Thermal Stability Metals. 10: 1411. DOI: 10.3390/met10111411 |
0.419 |
|
| 2020 |
Raman L, Karthick G, Guruvidyathri K, Fabijanic D, Murty SVSN, Murty BS, Kottada RS. Influence of processing route on the alloying behavior, microstructural evolution and thermal stability of CrMoNbTiW refractory high-entropy alloy Journal of Materials Research. 35: 1556-1571. DOI: 10.1557/Jmr.2020.128 |
0.497 |
|
| 2020 |
Srivastav AK, Bandi S, Kumar A, Murty BS. Microstructure evolution and densification during spark plasma sintering of nanocrystalline W-5wt.%Ta alloy Philosophical Magazine Letters. 100: 442-451. DOI: 10.1080/09500839.2020.1793010 |
0.507 |
|
| 2020 |
Guruvidyathri K, Vaidya M, Murty BS. Challenges in design and development of high entropy alloys: A thermodynamic and kinetic perspective Scripta Materialia. 188: 37-43. DOI: 10.1016/J.Scriptamat.2020.06.060 |
0.462 |
|
| 2020 |
Karati A, Hariharan VS, Ghosh S, Prasad A, Nagini M, Guruvidyathri K, Mallik RC, Shabadi R, Bichler L, Murty BS, Varadaraju UV. Thermoelectric properties of half-Heusler high-entropy Ti2NiCoSn1-xSb1+x (x = 0.5, 1) alloys with VEC>18 Scripta Materialia. 186: 375-380. DOI: 10.1016/J.Scriptamat.2020.04.036 |
0.478 |
|
| 2020 |
Parida T, Karati A, Guruvidyathri K, Murty BS, Markandeyulu G. Novel rare-earth and transition metal-based entropy stabilized oxides with spinel structure Scripta Materialia. 178: 513-517. DOI: 10.1016/J.Scriptamat.2019.12.027 |
0.313 |
|
| 2020 |
Muralikrishna GM, Vaidya M, Murty BS, Divinski SV, Wilde G. Tracer diffusion in ordered pseudo-binary multicomponent aluminides Scripta Materialia. 178: 227-231. DOI: 10.1016/J.Scriptamat.2019.11.044 |
0.482 |
|
| 2020 |
Lee JS, Oh HS, Kim W, Ryu CW, Kim JY, Chang HJ, Gu JL, Yao KF, Murty BS, Park ES. Anomalous behavior of glass-forming ability and mechanical response in a series of equiatomic binary to denary metallic glasses Materialia. 9: 100505. DOI: 10.1016/J.Mtla.2019.100505 |
0.351 |
|
| 2020 |
Vaidya M, Karati A, Guruvidyathri K, Nagini M, Pradeep KG, Murty BS. Suppression of σ-phase in nanocrystalline CoCrFeMnNiV high entropy alloy by unsolicited contamination during mechanical alloying and spark plasma sintering Materials Chemistry and Physics. 255: 123558. DOI: 10.1016/J.Matchemphys.2020.123558 |
0.545 |
|
| 2020 |
Bhushan B, Jahan K, Verma V, Murty BS, Mondal K. Photodegradation of methylene blue dye by powders of Ni–ZnO floweret consisting of petals of ZnO nanorod around Ni-rich core Materials Chemistry and Physics. 253: 123394. DOI: 10.1016/J.Matchemphys.2020.123394 |
0.34 |
|
| 2020 |
Nagini M, Pradeep KG, Vijay R, Reddy AV, Murty BS, Sundararajan G. A combined electron microscopy, atom probe tomography and small angle X-ray scattering study of oxide dispersion strengthened 18Cr ferritic steel Materials Characterization. 164: 110306. DOI: 10.1016/J.Matchar.2020.110306 |
0.42 |
|
| 2020 |
Meghwal A, Anupam A, Luzin V, Schulz C, Hall C, Murty BS, Kottada RS, Berndt CC, Ang ASM. Multiscale mechanical performance and corrosion behaviour of plasma sprayed AlCoCrFeNi high-entropy alloy coatings Journal of Alloys and Compounds. 157140. DOI: 10.1016/J.Jallcom.2020.157140 |
0.424 |
|
| 2020 |
Karthick G, Karati A, Murty BS. Low temperature synthesis of nanocrystalline Y2Ti2O7, Y2Zr2O7, Y2Hf2O7 with exceptional hardness by reverse co-precipitation technique Journal of Alloys and Compounds. 837: 155491. DOI: 10.1016/J.Jallcom.2020.155491 |
0.45 |
|
| 2020 |
John R, Karati A, Joseph J, Fabijanic D, Murty BS. Microstructure and mechanical properties of a high entropy alloy with a eutectic composition (AlCoCrFeNi2.1) synthesized by mechanical alloying and spark plasma sintering Journal of Alloys and Compounds. 835: 155424. DOI: 10.1016/J.Jallcom.2020.155424 |
0.567 |
|
| 2020 |
Mundhra G, Hariharan VS, Murty BS. Design of a novel Al–Ti–Zr light-weight alloy: CALPHAD and experiments Journal of Alloys and Compounds. 835: 155304. DOI: 10.1016/J.Jallcom.2020.155304 |
0.551 |
|
| 2020 |
Idury KSNS, Rastogi P, Narayan RL, Singh N, Ravi KR, Murty BS, Bhatt J. Room temperature dynamic indentation response of partially crystallized Zr–Cu metallic glass Journal of Alloys and Compounds. 834: 155161. DOI: 10.1016/J.Jallcom.2020.155161 |
0.313 |
|
| 2020 |
Vikram RJ, Murty BS, Fabijanic D, Suwas S. Insights into micro-mechanical response and texture of the additively manufactured eutectic high entropy alloy AlCoCrFeNi2.1 Journal of Alloys and Compounds. 827: 154034. DOI: 10.1016/J.Jallcom.2020.154034 |
0.454 |
|
| 2020 |
Pillari LK, Bakshi SR, Chaudhuri P, Murty BS. Fabrication of W-Cu functionally graded composites using high energy ball milling and spark plasma sintering for plasma facing components Advanced Powder Technology. 31: 3657-3666. DOI: 10.1016/J.Apt.2020.07.015 |
0.336 |
|
| 2020 |
Bhushan B, Jahan K, Katiyar PK, Murty BS, Mondal K. Evolution of ZnO flowerets from dealloying of Cu-Zn alloy powder Advanced Powder Technology. 31: 3093-3101. DOI: 10.1016/J.Apt.2020.05.031 |
0.467 |
|
| 2020 |
Garlapati MM, Vaidya M, Karati A, Mishra S, Bhattacharya R, Murty BS. Influence of Al content on thermal stability of nanocrystalline AlxCoCrFeNi high entropy alloys at low and intermediate temperatures Advanced Powder Technology. 31: 1985-1993. DOI: 10.1016/J.Apt.2020.02.032 |
0.553 |
|
| 2020 |
Anupam A, Kottada RS, Kashyap S, Meghwal A, Murty BS, Berndt CC, Ang ASM. Understanding the microstructural evolution of high entropy alloy coatings manufactured by atmospheric plasma spray processing Applied Surface Science. 505: 144117. DOI: 10.1016/J.Apsusc.2019.144117 |
0.463 |
|
| 2020 |
Meghwal A, Anupam A, Murty BS, Berndt CC, Kottada RS, Ang ASM. Thermal Spray High-Entropy Alloy Coatings: A Review Journal of Thermal Spray Technology. 29: 857-893. DOI: 10.1007/S11666-020-01047-0 |
0.387 |
|
| 2020 |
Hariharan VS, Karati A, Parida T, John R, Babu DA, Murty BS. Effect of Al addition and homogenization treatment on the magnetic properties of CoFeMnNi high-entropy alloy Journal of Materials Science. 55: 17204-17217. DOI: 10.1007/s10853-020-05171-8 |
0.334 |
|
| 2019 |
Tippireddy S, D S PK, Karati A, Ramakrishnan A, Sarkar S, C Peter S, P M, Chen KH, Murty BS, Mallik RC. The Effect of Sn Substitution on the Thermoelectric Properties of Synthetic Tetrahedrite. Acs Applied Materials & Interfaces. PMID 31120729 DOI: 10.1021/Acsami.9B02956 |
0.359 |
|
| 2019 |
Karati A, Nagini M, Ghosh S, Shabadi R, Pradeep KG, Mallik RC, Murty BS, Varadaraju UV. TiNiCoSnSb - a new half-Heusler type high-entropy alloy showing simultaneous increase in Seebeck coefficient and electrical conductivity for thermoelectric applications. Scientific Reports. 9: 5331. PMID 30926868 DOI: 10.1038/S41598-019-41818-6 |
0.528 |
|
| 2019 |
Anupam A, Kumar S, Chavan NM, Murty BS, Kottada RS. First report on cold-sprayed AlCoCrFeNi high-entropy alloy and its isothermal oxidation Journal of Materials Research. 34: 796-806. DOI: 10.1557/Jmr.2019.38 |
0.423 |
|
| 2019 |
Vaidya M, Muralikrishna GM, Murty BS. High-entropy alloys by mechanical alloying: A review Journal of Materials Research. 34: 664-686. DOI: 10.1557/Jmr.2019.37 |
0.537 |
|
| 2019 |
Raman L, Guruvidyathri K, Kumari G, Murty SVSN, Kottada RS, Murty BS. Phase evolution of refractory high-entropy alloy CrMoNbTiW during mechanical alloying and spark plasma sintering Journal of Materials Research. 34: 756-766. DOI: 10.1557/Jmr.2018.483 |
0.52 |
|
| 2019 |
Adil S, Murty BS. Effect of milling on the oxidation kinetics of Aluminium + Boron mixture and nanocrystalline Aluminium Boride (AlB12) Thermochimica Acta. 678: 178306. DOI: 10.1016/J.Tca.2019.178306 |
0.372 |
|
| 2019 |
Karati A, Guruvidyathri K, Hariharan VS, Murty BS. Thermal stability of AlCoFeMnNi high-entropy alloy Scripta Materialia. 162: 465-467. DOI: 10.1016/J.Scriptamat.2018.12.017 |
0.511 |
|
| 2019 |
Srivastav AK, Chawake N, Yadav D, Karthiselva NS, Murty BS. Localized pore evolution assisted densification during spark plasma sintering of nanocrystalline W-5wt.%Mo alloy Scripta Materialia. 159: 41-45. DOI: 10.1016/J.Scriptamat.2018.09.013 |
0.442 |
|
| 2019 |
Karati A, Mukherjee S, Mallik RC, Shabadi R, Murty BS, Varadaraju UV. Simultaneous increase in thermopower and electrical conductivity through Ta-doping and nanostructuring in half-Heusler TiNiSn alloys Materialia. 7: 100410. DOI: 10.1016/J.Mtla.2019.100410 |
0.408 |
|
| 2019 |
Pramod SL, Ravikirana, Rao AKP, Murty BS, Bakshi SR. Microstructure and mechanical properties of as-cast and T6 treated Sc modified A356-5TiB2 in-situ composite Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 739: 383-394. DOI: 10.1016/J.Msea.2018.10.080 |
0.412 |
|
| 2019 |
Vaidya M, Anupam A, Bharadwaj JV, Srivastava C, Murty BS. Grain growth kinetics in CoCrFeNi and CoCrFeMnNi high entropy alloys processed by spark plasma sintering Journal of Alloys and Compounds. 791: 1114-1121. DOI: 10.1016/J.Jallcom.2019.03.341 |
0.537 |
|
| 2019 |
Vaidya M, Guruvidyathri K, Murty BS. Phase formation and thermal stability of CoCrFeNi and CoCrFeMnNi equiatomic high entropy alloys Journal of Alloys and Compounds. 774: 856-864. DOI: 10.1016/J.Jallcom.2018.09.342 |
0.54 |
|
| 2019 |
Vaidya M, Karati A, Marshal A, Pradeep KG, Murty BS. Phase evolution and stability of nanocrystalline CoCrFeNi and CoCrFeMnNi high entropy alloys Journal of Alloys and Compounds. 770: 1004-1015. DOI: 10.1016/J.Jallcom.2018.08.200 |
0.541 |
|
| 2019 |
Pramanik S, Srivastav AK, Manuel Jolly B, Chawake N, Murty B. Effect of Re on microstructural evolution and densification kinetics during spark plasma sintering of nanocrystalline W Advanced Powder Technology. 30: 2779-2786. DOI: 10.1016/J.Apt.2019.08.025 |
0.508 |
|
| 2019 |
Bhushan B, Katiyar PK, Murty BS, Mondal K. Synthesis of hydrophobic Ni-VN alloy powder by ball milling Advanced Powder Technology. 30: 1600-1610. DOI: 10.1016/J.Apt.2019.05.007 |
0.56 |
|
| 2019 |
Bhushan B, Murty BS, Mondal K. A new approach for synthesis of ZnO nanorod flowerets and subsequent pure free-standing ZnO nanorods Advanced Powder Technology. 30: 30-41. DOI: 10.1016/J.Apt.2018.10.004 |
0.434 |
|
| 2019 |
John R, Karati A, Garlapati MM, Vaidya M, Bhattacharya R, Fabijanic D, Murty BS. Influence of mechanically activated annealing on phase evolution in Al 0.3 CoCrFeNi high-entropy alloy Journal of Materials Science. 54: 14588-14598. DOI: 10.1007/S10853-019-03917-7 |
0.55 |
|
| 2018 |
Ghosh S, Bisht A, Karati A, Rogl G, Rogl P, Murty BS, Suwas S, Mallik RC. Thermoelectric properties of Co4Sb12 with Bi2Te3 nanoinclusions. Journal of Physics. Condensed Matter : An Institute of Physics Journal. 30: 095701. PMID 29432210 DOI: 10.1088/1361-648X/Aaa5Ea |
0.328 |
|
| 2018 |
Kumar P, MBalasubramaniam, Murty B, Rajan K. Infrared and Structural Studies of Micro and Nano-crystalline Ta Doped Lead Zirconate Titanate Ceramics Defence Science Journal. 68: 412-416. DOI: 10.14429/Dsj.68.12314 |
0.396 |
|
| 2018 |
Vaidya M, Muralikrishna GM, Divinski SV, Murty BS. Experimental assessment of the thermodynamic factor for diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys Scripta Materialia. 157: 81-85. DOI: 10.1016/J.Scriptamat.2018.07.040 |
0.398 |
|
| 2018 |
Nampoothiri J, Balasundar I, Raj B, Murty BS, Ravi KR. Porosity alleviation and mechanical property improvement of strontium modified A356 alloy by ultrasonic treatment Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 724: 586-593. DOI: 10.1016/J.Msea.2018.03.069 |
0.479 |
|
| 2018 |
Guruvidyathri K, Murty BS, Yeh JW, Kumar KCH. Gibbs energy-composition plots as a tool for high-entropy alloy design Journal of Alloys and Compounds. 768: 358-367. DOI: 10.1016/J.Jallcom.2018.07.264 |
0.475 |
|
| 2018 |
Kulkarni R, Murty BS, Srinivas V. Study of microstructure and magnetic properties of AlNiCo(CuFe) high entropy alloy Journal of Alloys and Compounds. 746: 194-199. DOI: 10.1016/J.Jallcom.2018.02.275 |
0.481 |
|
| 2018 |
Bhushan B, Murty BS, Mondal K. Dealloying kinetics and mechanism of porosity evolution in mechanically alloyed Ag25Zn75 powder particles Corrosion Science. 139: 155-162. DOI: 10.1016/J.Corsci.2018.04.044 |
0.485 |
|
| 2018 |
Adil S, Karati A, Murty BS. Mechanochemical synthesis of nanocrystalline aluminium boride (AlB12) Ceramics International. 44: 20105-20110. DOI: 10.1016/J.Ceramint.2018.07.302 |
0.419 |
|
| 2018 |
Karthiselva NS, Murty BS, Bakshi SR. Graphene nanoplatelets induce crystallographic texturing during reactive spark plasma sintering of titanium diboride Carbon. 133: 323-334. DOI: 10.1016/J.Carbon.2018.03.052 |
0.394 |
|
| 2018 |
Chattopadhyay C, Prasad A, Murty BS. Phase prediction in high entropy alloys – A kinetic approach Acta Materialia. 153: 214-225. DOI: 10.1016/J.Actamat.2018.05.002 |
0.531 |
|
| 2018 |
Vaidya M, Pradeep KG, Murty BS, Wilde G, Divinski SV. Bulk tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys Acta Materialia. 146: 211-224. DOI: 10.1016/J.Actamat.2017.12.052 |
0.394 |
|
| 2018 |
Srinivas M, Paradkar A, Murty BS, Majumdar B. Processing of [(Fe 0.5 Co 0.5 ) 0.75 B 0.2 Si 0.05 ] 96 Nb 4 Bulk Metallic Glass Alloy by Cu Mould Casting and Spark Plasma Sintering Transactions of the Indian Institute of Metals. 71: 309-317. DOI: 10.1007/S12666-017-1183-X |
0.492 |
|
| 2018 |
Karati A, Vaidya M, Murty BS. Comparison of Different Processing Routes for the Synthesis of Semiconducting AlSb Journal of Materials Engineering and Performance. 27: 6196-6205. DOI: 10.1007/S11665-018-3630-1 |
0.517 |
|
| 2017 |
Vaidya M, Pradeep KG, Murty BS, Wilde G, Divinski SV. Radioactive isotopes reveal a non sluggish kinetics of grain boundary diffusion in high entropy alloys. Scientific Reports. 7: 12293. PMID 28947771 DOI: 10.1038/S41598-017-12551-9 |
0.454 |
|
| 2017 |
Karthiselva NS, Kashyap S, Yadav D, Murty BS, Bakshi SR. Densification mechanisms during reactive spark plasma sintering of Titanium diboride and Zirconium diboride Philosophical Magazine. 97: 1588-1609. DOI: 10.1080/14786435.2017.1312022 |
0.416 |
|
| 2017 |
Atturan UA, Nandam SH, Murty BS, Sankaran S. Deformation behaviour of in-situ TiB2 reinforced A357 aluminium alloy composite foams under compressive and impact loading Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 684: 178-185. DOI: 10.1016/J.Msea.2016.12.048 |
0.369 |
|
| 2017 |
Karati A, Murty BS. Synthesis of nanocrystalline half-Heusler TiNiSn by mechanically activated annealing Materials Letters. 205: 114-117. DOI: 10.1016/J.Matlet.2017.06.068 |
0.49 |
|
| 2017 |
Vaidya M, Prasad A, Parakh A, Murty BS. Influence of sequence of elemental addition on phase evolution in nanocrystalline AlCoCrFeNi: Novel approach to alloy synthesis using mechanical alloying Materials & Design. 126: 37-46. DOI: 10.1016/J.Matdes.2017.04.027 |
0.504 |
|
| 2017 |
Basu J, Vincent S, Murty B, Kramer M, Bhatt J. Role of polyhedral order in glass to crystal transition dynamics in Zr60Cu10Al15Ni15 glass forming alloy Journal of Non-Crystalline Solids. 471: 256-263. DOI: 10.1016/J.Jnoncrysol.2017.06.005 |
0.604 |
|
| 2017 |
Akkiraju K, Kashyap S, Srivastav AK, Chawake N, Bichler L, Murty BS. Novel coalescence-driven grain-growth mechanism during annealing/spark plasma sintering of NiO nanocrystals Journal of the European Ceramic Society. 37: 4973-4977. DOI: 10.1016/J.Jeurceramsoc.2017.05.057 |
0.406 |
|
| 2017 |
Bhushan B, Murty BS, Mondal K. A two-step method for synthesis of micron sized nanoporous silver powder and ZnO nanoparticles Advanced Powder Technology. 28: 2532-2541. DOI: 10.1016/J.Apt.2017.07.003 |
0.387 |
|
| 2017 |
Guruvidyathri K, Kumar KCH, Yeh JW, Murty BS. Topologically Close-packed Phase Formation in High Entropy Alloys: A Review of Calphad and Experimental Results Jom. 69: 2113-2124. DOI: 10.1007/S11837-017-2566-5 |
0.457 |
|
| 2016 |
Raman L, Gothandapani K, Murty BS. Austenitic Oxide Dispersion Strengthened Steels : A Review Defence Science Journal. 66: 316-322. DOI: 10.14429/Dsj.66.10205 |
0.369 |
|
| 2016 |
Chattopadhyay C, Idury KSNS, Bhatt J, Mondal K, Murty BS. Critical evaluation of glass forming ability criteria Materials Science and Technology. 32: 380-400. DOI: 10.1179/1743284715Y.0000000104 |
0.507 |
|
| 2016 |
Murugan K, Joardar J, Gandhi AS, Murty BS, Borse PH. Photo-induced monomer/dimer kinetics in methylene blue degradation over doped and phase controlled nano-TiO2 films Rsc Advances. 6: 43563-43573. DOI: 10.1039/C6Ra03738K |
0.323 |
|
| 2016 |
Chattopadhyay C, Murty BS. Kinetic modification of the ‘confusion principle’ for metallic glass formation Scripta Materialia. 116: 7-10. DOI: 10.1016/J.Scriptamat.2016.01.022 |
0.419 |
|
| 2016 |
Srivastav AK, Basu J, Kashyap S, Chawake N, Yadav D, Murty BS. Crystallographic-shear-phase-driven W18O49 nanowires growth on nanocrystalline W surfaces Scripta Materialia. 115: 28-32. DOI: 10.1016/J.Scriptamat.2015.12.037 |
0.352 |
|
| 2016 |
Karthiselva NS, Murty BS, Bakshi SR. Low temperature synthesis of dense and ultrafine grained zirconium diboride compacts by reactive spark plasma sintering Scripta Materialia. 110: 78-81. DOI: 10.1016/J.Scriptamat.2015.08.005 |
0.371 |
|
| 2016 |
Pramod SL, Ravikirana, Rao AKP, Murty BS, Bakshi SR. Effect of Sc addition and T6 aging treatment on the microstructure modification and mechanical properties of A356 alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 674: 438-450. DOI: 10.1016/J.Msea.2016.08.022 |
0.476 |
|
| 2016 |
Atturan UA, Nandam SH, Murty BS, Sankaran S. Processing and characterization of in-situ TiB2 stabilized closed cell aluminium alloy composite foams Materials & Design. 101: 245-253. DOI: 10.1016/J.Matdes.2016.03.153 |
0.388 |
|
| 2016 |
Idury KSNS, Murty BS, Bhatt J. Identifying non-equiatomic high entropy bulk metallic glass formers through thermodynamic approach: A theoretical perspective Journal of Non-Crystalline Solids. 450: 164-173. DOI: 10.1016/J.Jnoncrysol.2016.08.002 |
0.554 |
|
| 2016 |
Vaidya M, Trubel S, Murty BS, Wilde G, Divinski SV. Ni tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys Journal of Alloys and Compounds. 688: 994-1001. DOI: 10.1016/J.Jallcom.2016.07.239 |
0.533 |
|
| 2016 |
Mudinepalli VR, Leng F, Reddy MP, Lin WC, Murty BS. Structural, dielectric and ferroelectric properties of lead-free Na0.5Bi0.5TiO3 ceramics prepared by spark plasma sintering technique Indian Journal of Physics. 90: 131-138. DOI: 10.1007/S12648-015-0743-3 |
0.409 |
|
| 2016 |
Udhayabanu V, Ravi KR, Murty BS. Structure-Property Correlation in Fe-Al 2 O 3 In Situ Nanocomposite Synthesized by High-Energy Ball Milling and Spark Plasma Sintering Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 47: 5223-5233. DOI: 10.1007/S11661-016-3627-Z |
0.418 |
|
| 2016 |
Mudinepalli VR, Leng F, Lin WC, Murty BS. Conventional and Spark Plasma Sintered Ba0.8Pb0.2TiO3 Nano Ceramics: Structural, Dielectric, and Ferroelectric Properties Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 47: 2579-2586. DOI: 10.1007/S11661-016-3441-7 |
0.41 |
|
| 2015 |
Mondal RA, Murty BS, Murthy VR. Origin of magnetocapacitance in chemically homogeneous and inhomogeneous ferrites. Physical Chemistry Chemical Physics : Pccp. 17: 2432-7. PMID 25490924 DOI: 10.1039/C4Cp04398G |
0.392 |
|
| 2015 |
Mudinepalli VR, Reddy NR, Lin WC, Kumar KVS, Murty BS. Phase transitions of the ferroelectric Na0.5Bi0.5TiO3 by dielectric and internal friction measurements Advanced Materials Letters. 6: 27-32. DOI: 10.5185/Amlett.2015.5620 |
0.371 |
|
| 2015 |
Srivastav AK, Chawake N, Murty BS. Grain-size-dependent non-monotonic lattice parameter variation in nanocrystalline W: The role of non-equilibrium grain boundary structure Scripta Materialia. 98: 20-23. DOI: 10.1016/J.Scriptamat.2014.11.005 |
0.353 |
|
| 2015 |
Mondal RA, Murty BS, Murthy VRK. Grain size dependent phase transition and superparaelectric behavior of ferroelectric BST Physica B: Condensed Matter. 461: 10-16. DOI: 10.1016/J.Physb.2014.12.011 |
0.393 |
|
| 2015 |
Pramod SL, Prasada Rao AK, Murty BS, Bakshi SR. Effect of Sc addition on the microstructure and wear properties of A356 alloy and A356-TiB2 in situ composite Materials and Design. 78: 85-94. DOI: 10.1016/J.Matdes.2015.04.026 |
0.495 |
|
| 2015 |
Vincent S, Murty BS, Kramer MJ, Bhatt J. Micro and nano indentation studies on Zr60Cu10Al15Ni15 bulk metallic glass Materials and Design. 65: 98-103. DOI: 10.1016/J.Matdes.2014.09.017 |
0.54 |
|
| 2015 |
Mondal RA, Murty BS, Murthy VRK. Dielectric, magnetic and enhanced magnetoelectric response in high energy ball milling assisted BST-NZF particulate composite Materials Chemistry and Physics. 167: 338-346. DOI: 10.1016/J.Matchemphys.2015.10.053 |
0.355 |
|
| 2015 |
Vaidya M, Armugam S, Kashyap S, Murty BS. Amorphization in equiatomic high entropy alloys Journal of Non-Crystalline Solids. 413: 8-14. DOI: 10.1016/J.Jnoncrysol.2015.01.015 |
0.566 |
|
| 2015 |
Mudinepalli VR, Song S-, Li J-, Murty BS. Magnetoelectric properties of lead-free Ni0.93Co0.02Mn0.05Fe1.95O4–Na0.5Bi0.5TiO3 multiferroic composites synthesized by spark plasma sintering Journal of Magnetism and Magnetic Materials. 386: 44-49. DOI: 10.1016/J.Jmmm.2015.03.059 |
0.406 |
|
| 2015 |
Idury KSNS, Murty BS, Bhatt J. Thermodynamic modeling and composition design for the formation of Zr–Ti–Cu–Ni–Al high entropy bulk metallic glasses Intermetallics. 65: 42-50. DOI: 10.1016/J.Intermet.2015.04.007 |
0.53 |
|
| 2015 |
Karthiselva NS, Murty BS, Bakshi SR. Low temperature synthesis of dense TiB2 compacts by reaction spark plasma sintering International Journal of Refractory Metals and Hard Materials. 48: 201-210. DOI: 10.1016/J.Ijrmhm.2014.09.015 |
0.408 |
|
| 2015 |
Mudinepalli VR, Song S-, Ravi M, Li J-, Murty BS. Multiferroic properties of lead-free Ni0.5Zn0.5Fe1.9O4−δ−Na0.5Bi0.5TiO3 composites synthesized by spark plasma sintering Ceramics International. 41: 6882-6888. DOI: 10.1016/J.Ceramint.2015.01.140 |
0.404 |
|
| 2015 |
Mondal K, Murty BS. Factors Influencing Oxidation Behavior of Metallic Glasses Transactions of the Indian Institute of Metals. 68: 1151-1154. DOI: 10.1007/S12666-015-0661-2 |
0.503 |
|
| 2015 |
Vincent S, Satish Idury KSN, Gokhale A, Basu J, Murty BS, Bhatt J. Icosahedral Cluster Energetics in Zr60Cu10Al15Ni15 Bulk Metallic Glass and Their Role on Solidification Behavior Transactions of the Indian Institute of Metals. DOI: 10.1007/S12666-015-0654-1 |
0.402 |
|
| 2015 |
Babu DA, Majumdar B, Murty BS. Glass Forming Ability, Structure and Soft Magnetic Properties of Rapidly Solidified Fe86Zr7−xNbxB6Cu1 Alloy Ribbons Transactions of the Indian Institute of Metals. 68: 1047-1051. DOI: 10.1007/S12666-015-0643-4 |
0.479 |
|
| 2015 |
Pramod SL, Bakshi SR, Murty BS. Aluminum-Based Cast In Situ Composites: A Review Journal of Materials Engineering and Performance. 24: 2185-2207. DOI: 10.1007/S11665-015-1424-2 |
0.415 |
|
| 2015 |
Mudinepalli VR, Lin WC, Song SH, Murty BS. Spark Plasma Sintering Temperature Effect on Structural, Dielectric and Ferroelectric Properties of Ba0.9Sr0.1TiO3 Nanocrystalline Ceramics Journal of Electronic Materials. DOI: 10.1007/S11664-015-4005-0 |
0.39 |
|
| 2015 |
Arvindha Babu D, Majumdar B, Sarkar R, Murty BS, Chattopadhyay K. On the Structural Stability of Melt Spun Ribbons of Fe95−xZrxB4Cu1 (x = 7 and 9) Alloys and Correlation with Their Magnetic Properties Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 1-12. DOI: 10.1007/S11661-015-3204-X |
0.513 |
|
| 2015 |
Nandam SH, Murty BS, Sankaran S. Influence of TiB2 Addition on the Precipitation Kinetics in Al-7Si-0.3Mg In Situ TiB2 Composites Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 2844-2849. DOI: 10.1007/S11661-015-2927-Z |
0.4 |
|
| 2015 |
Ang ASM, Berndt CC, Sesso ML, Anupam A, S P, Kottada RS, Murty BS. Plasma-Sprayed High Entropy Alloys: Microstructure and Properties of AlCoCrFeNi and MnCoCrFeNi Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 46: 791-800. DOI: 10.1007/S11661-014-2644-Z |
0.446 |
|
| 2015 |
Vincent S, Daiwile A, Devi SS, Kramer MJ, Besser MF, Murty BS, Bhatt J. Bio-corrosion and Cytotoxicity Studies on Novel Zr55Co30Ti15 and Cu60Zr20Ti20 Metallic Glasses Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 2422-2430. DOI: 10.1007/S11661-014-2574-9 |
0.562 |
|
| 2014 |
Praveen S, Murty BS, Kottada RS. Effect of molybdenum and niobium on the phase formation and hardness of nanocrystalline CoCrFeNi high entropy alloys. Journal of Nanoscience and Nanotechnology. 14: 8106-9. PMID 25942933 DOI: 10.1166/Jnn.2014.9441 |
0.549 |
|
| 2014 |
Devi AR, Chelvane JA, Prabhakar PK, Venkateswarlu B, Doble M, Murty BS. Influence of surfactant variation on effective anisotropy and magnetic properties of mechanically milled magnetite nanoparticles and their biocompatibility Ieee Transactions On Magnetics. 50. DOI: 10.1109/Tmag.2014.2324412 |
0.301 |
|
| 2014 |
Kumar BP, Kumar HH, Kharat DK, Balasubramanian M, Murty BS. Investigation on PZT-Based Nanostructured Functional Materials Synthesis and Reactivity in Inorganic Metal-Organic and Nano-Metal Chemistry. 44: 991-994. DOI: 10.1080/15533174.2013.797451 |
0.398 |
|
| 2014 |
Chawake N, Pinto LD, Srivastav AK, Akkiraju K, Murty BS, Kottada RS. On Joule heating during spark plasma sintering of metal powders Scripta Materialia. 93: 52-55. DOI: 10.1016/J.Scriptamat.2014.09.003 |
0.349 |
|
| 2014 |
Mudinepalli VR, Song SH, Murty BS. Enhanced magnetoelectric properties in lead-free Ni0.83Co0.15Cu0.02Fe1.9O4-δ–Na0.5Bi0.5TiO3 composites by spark plasma sintering Scripta Materialia. 82: 9-12. DOI: 10.1016/J.Scriptamat.2014.03.004 |
0.389 |
|
| 2014 |
Das CR, Albert SK, Laha K, Swaminathan J, Ravi S, Bhaduri AK, Murty BS, Mayr P. Influence of coincidence site lattice boundary on creep resistance of P91 steel weldments Procedia Engineering. 86: 80-87. DOI: 10.1016/J.Proeng.2014.11.014 |
0.38 |
|
| 2014 |
Divya M, Das CR, Albert SK, Goyal S, Ganesh P, Kaul R, Swaminathan J, Murty BS, Kukreja LM, Bhaduri AK. Influence of welding process on Type IV cracking behavior of P91 steel Materials Science and Engineering A. 613: 148-158. DOI: 10.1016/J.Msea.2014.06.089 |
0.319 |
|
| 2014 |
Mondal RA, Murty BS, Murthy VRK. Temperature and frequency dependent electrical properties of NiCuZn ferrite with CuO-rich grain boundary segregation Journal of Alloys and Compounds. 595: 206-212. DOI: 10.1016/J.Jallcom.2014.01.166 |
0.451 |
|
| 2014 |
Sriharitha R, Murty BS, Kottada RS. Alloying, thermal stability and strengthening in spark plasma sintered AlxCoCrCuFeNi high entropy alloys Journal of Alloys and Compounds. 583: 419-426. DOI: 10.1016/J.Jallcom.2013.08.176 |
0.569 |
|
| 2014 |
Mudinepalli VR, Song S, Li J, Murty BS. Effect of grain size on the electrical properties of high dense BPT nanocrystalline ferroelectric ceramics Ceramics International. 40: 1781-1788. DOI: 10.1016/J.Ceramint.2013.07.078 |
0.434 |
|
| 2014 |
Mondal RA, Murty BS, Murthy VRK. Maxwell–Wagner polarization in grain boundary segregated NiCuZn ferrite Current Applied Physics. 14: 1727-1733. DOI: 10.1016/J.Cap.2014.10.005 |
0.397 |
|
| 2014 |
Preethi M, Murty BS, Ganesh Sundara Raman S, Natarajan R. Control of UFG Microstructure in Welded Carbon Steel Tubes by Cold Drawing and Annealing Transactions of the Indian Institute of Metals. DOI: 10.1007/S12666-014-0394-7 |
0.452 |
|
| 2014 |
Mandal M, Singh D, Gouthama, Murty BS, Sangal S, Mondal K. Porous copper template from partially spark plasma-sintered Cu-Zn aggregate via dezincification Bulletin of Materials Science. 37: 743-752. DOI: 10.1007/S12034-014-0001-X |
0.374 |
|
| 2014 |
Murthy NK, Ram GDJ, Murty BS, Reddy GM, Rao TJP. Carbide-Free Bainitic Weld Metal: A New Concept in Welding of Armor Steels Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 45: 2327-2337. DOI: 10.1007/S11663-014-0120-1 |
0.352 |
|
| 2014 |
Rajan K, Rai N, Vadlamani SS, Murty BS. Isothermal grain growth studies on nanostructured 9Cr-1Mo and 9Cr-1W ferritic steels containing nano-sized oxide dispersoids Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 45: 1684-1688. DOI: 10.1007/S11661-014-2189-1 |
0.464 |
|
| 2014 |
Vincent S, Bhatt J, Murty BS. Thermodynamic basis for glass formation in Cu-Zr rich ternary systems and their synthesis by mechanical alloying Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 45: 2363-2370. DOI: 10.1007/S11661-013-1855-Z |
0.45 |
|
| 2013 |
Das CR, Albert SK, Swaminathan J, Bhaduri AK, Murty BS. Effect of boron on creep behaviour of inter-critically annealed modified 9Cr-1Mo steel Procedia Engineering. 55: 402-407. DOI: 10.1016/J.Proeng.2013.03.271 |
0.421 |
|
| 2013 |
Murugan M, Subasri R, Rao TN, Gandhi AS, Murty BS. Synthesis, characterization and demonstration of self-cleaning TiO 2 coatings on glass and glazed ceramic tiles Progress in Organic Coatings. 76: 1756-1760. DOI: 10.1016/J.Porgcoat.2013.05.012 |
0.348 |
|
| 2013 |
Udhayabanu V, Ravi KR, Murty BS. Ultrafine-grained, high-strength NiAl with Al2O3 and Al4C3 nanosized particles dispersed via mechanical alloying in toluene with spark plasma sintering Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 585: 379-386. DOI: 10.1016/J.Msea.2013.07.024 |
0.493 |
|
| 2013 |
Mudinepalli VR, Song S, Li J, Murty BS. A comparative study of structural and electrical properties of Ba0.8Pb0.2TiO3 nanocrystalline ceramics prepared by microwave and spark plasma sintering Materials Chemistry and Physics. 142: 686-691. DOI: 10.1016/J.Matchemphys.2013.08.023 |
0.398 |
|
| 2013 |
Vincent S, Khan AF, Murty BS, Bhatt J. Corrosion characterization on melt spun Cu60Zr20Ti20 metallic glass: An experimental case study Journal of Non-Crystalline Solids. 379: 48-53. DOI: 10.1016/J.Jnoncrysol.2013.07.007 |
0.401 |
|
| 2013 |
Das N, Mittra J, Murty BS, Pabi SK, Kulkarni UD, Dey GK. Miedema model based methodology to predict amorphous-forming-composition range in binary and ternary systems Journal of Alloys and Compounds. 550: 483-495. DOI: 10.1016/J.Jallcom.2012.10.124 |
0.472 |
|
| 2013 |
Rao BR, Srinivas M, Shah AK, Gandhi AS, Murty BS. A new thermodynamic parameter to predict glass forming ability in iron based multi-component systems containing zirconium Intermetallics. 35: 73-81. DOI: 10.1016/J.Intermet.2012.11.020 |
0.417 |
|
| 2013 |
Sriharitha R, Murty BS, Kottada RS. Phase formation in mechanically alloyed AlxCoCrCuFeNi (x = 0.45, 1, 2.5, 5 mol) high entropy alloys Intermetallics. 32: 119-126. DOI: 10.1016/J.Intermet.2012.08.015 |
0.553 |
|
| 2013 |
Pradeep KG, Wanderka N, Choi P, Banhart J, Murty BS, Raabe D. Atomic-scale compositional characterization of a nanocrystalline AlCrCuFeNiZn high-entropy alloy using atom probe tomography Acta Materialia. 61: 4696-4706. DOI: 10.1016/J.Actamat.2013.04.059 |
0.565 |
|
| 2013 |
Chawake N, Paleti SHK, Murty BS, Kottada RS. Synthesis and Characterization of Spark Plasma Sintered FeAl and In situ FeAl–Al 2 O 3 Composite Transactions of the Indian Institute of Metals. 66: 419-424. DOI: 10.1007/S12666-013-0279-1 |
0.424 |
|
| 2013 |
Srivastav AK, Panindre AM, Murty BS. XRD characterization of microstructural evolution during mechanical alloying of W-20 wt%Mo Transactions of the Indian Institute of Metals. 66: 409-414. DOI: 10.1007/S12666-013-0269-3 |
0.525 |
|
| 2013 |
Praveen S, Anupam A, Sirasani T, Murty BS, Kottada RS. Characterization of Oxide Dispersed AlCoCrFe High Entropy Alloy Synthesized by Mechanical Alloying and Spark Plasma Sintering Transactions of the Indian Institute of Metals. 66: 369-373. DOI: 10.1007/S12666-013-0268-4 |
0.525 |
|
| 2013 |
Praveen S, Murty BS, Kottada RS. Phase Evolution and Densification Behavior of Nanocrystalline Multicomponent High Entropy Alloys During Spark Plasma Sintering Jom. 65: 1797-1804. DOI: 10.1007/S11837-013-0759-0 |
0.534 |
|
| 2013 |
Reddy NS, Rao AKP, Krishnaiah J, Chakraborty M, Murty BS. Design of an Ideal Grain-Refiner Alloy for Al-7Si Alloy Using Artificial Neural Networks Journal of Materials Engineering and Performance. 22: 696-699. DOI: 10.1007/S11665-012-0334-9 |
0.467 |
|
| 2013 |
Alluri NR, Parashar SKS, Parashar K, Mukherjee PS, Murty BS. Investigation of structural and diffuse phase transition of new nano lead-free system xBAO - YBZT - (1-x-y) BCT Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 44: 5241-5250. DOI: 10.1007/S11661-013-1875-8 |
0.362 |
|
| 2013 |
Rajan K, Shanmugasundaram T, Sarma VS, Murty BS. Effect of Y 2 O 3 on Spark Plasma Sintering Kinetics of Nanocrystalline 9Cr-1Mo Ferritic Oxide Dispersion-Strengthened Steels Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 44: 4037-4041. DOI: 10.1007/S11661-013-1845-1 |
0.491 |
|
| 2013 |
Das CR, Albert SK, Bhaduri AK, Murty BS. Effect of boron addition and initial heat-treatment temperature on microstructure and mechanical properties of modified 9Cr-1Mo steels under different heat-treatment conditions Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 44: 2171-2186. DOI: 10.1007/S11661-012-1584-8 |
0.395 |
|
| 2013 |
Mudinepalli VR, Song S, Murty BS. Microwave sintering effect on structural and dielectrical properties of Ba1−x(Sr/Pb)xTiO3 (x = 0.2 for Sr and Pb) ceramics Journal of Materials Science: Materials in Electronics. 24: 2141-2150. DOI: 10.1007/S10854-013-1072-Y |
0.404 |
|
| 2012 |
Ravi KR, Indumathi, Subramanian R, Murty BS. Spark Plasma Sintering of Fe-Cr-Mo-P-B-C-Si Amorphous Alloy Materials Science Forum. 710: 320-325. DOI: 10.4028/Www.Scientific.Net/Msf.710.320 |
0.522 |
|
| 2012 |
Ravi KR, Murugesan A, Udhayabanu V, Subramanian R, Murty BS. Microstructure and mechanical Property of Fe-Al 2O 3 nanocomposites synthesized by reactive milling followed by spark plasma sintering Materials Science Forum. 710: 291-296. DOI: 10.4028/Www.Scientific.Net/Msf.710.291 |
0.371 |
|
| 2012 |
Kiran SR, Sreenivasulu G, Murthy VRK, Subramanian V, Murty BS. Effect of Grain Size on the Microwave Dielectric Characteristics of High‐Energy Ball‐Milled Zinc Magnesium Titanate Ceramics Journal of the American Ceramic Society. 95: 1973-1979. DOI: 10.1111/J.1551-2916.2012.05128.X |
0.385 |
|
| 2012 |
Schloth P, Weisser MA, Swygenhoven HV, Petegem SV, Susila P, Sarma VS, Murty BS, Lauterbach S, Heilmaier M. Two strain-hardening mechanisms in nanocrystalline austenitic steel: An in situ synchrotron X-ray diffraction study Scripta Materialia. 66: 690-693. DOI: 10.1016/J.Scriptamat.2012.01.021 |
0.398 |
|
| 2012 |
Rajan K, Sarma VS, Kutty TRG, Murty BS. Hot hardness behaviour of ultrafine grained ferritic oxide dispersion strengthened alloys prepared by mechanical alloying and spark plasma sintering Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 558: 492-496. DOI: 10.1016/J.Msea.2012.08.033 |
0.565 |
|
| 2012 |
Das CR, Albert SK, Bhaduri AK, Murty BS. Understanding room temperature deformation behavior through indentation studies on modified 9Cr-1Mo steel weldments Materials Science and Engineering A. 552: 419-426. DOI: 10.1016/J.Msea.2012.05.064 |
0.403 |
|
| 2012 |
Vincent S, Basu J, Murty BS, Bhatt J. Micro indentation study on Cu 60Zr 20Ti 20 metallic glass Materials Science and Engineering A. 550: 160-166. DOI: 10.1016/J.Msea.2012.04.050 |
0.49 |
|
| 2012 |
Praveen S, Murty BS, Kottada RS. Alloying behavior in multi-component AlCoCrCuFe and NiCoCrCuFe high entropy alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 534: 83-89. DOI: 10.1016/J.Msea.2011.11.044 |
0.533 |
|
| 2012 |
Raghavan R, Kumar KCH, Murty BS. Analysis of phase formation in multi-component alloys Journal of Alloys and Compounds. 544: 152-158. DOI: 10.1016/J.Jallcom.2012.07.105 |
0.42 |
|
| 2012 |
Srivastav AK, Murty BS. Dilatometric analysis on shrinkage behavior during non-isothermal sintering of nanocrystalline tungsten mechanically alloyed with molybdenum Journal of Alloys and Compounds. 536: S41-S44. DOI: 10.1016/J.Jallcom.2011.12.067 |
0.499 |
|
| 2012 |
Bhatt J, Balachander N, Shekher S, Karthikeyan R, Peshwe DR, Murty BS. Synthesis of nanostructured Al–Mg–SiO2 metal matrix composites using high-energy ball milling and spark plasma sintering Journal of Alloys and Compounds. 536. DOI: 10.1016/J.Jallcom.2011.12.062 |
0.524 |
|
| 2012 |
Ramana MV, Reddy MP, Reddy NR, Murty BS, Kumar KVS, Song S. Mechanical properties of Ni0.83Co0.15Cu0.02Fe1.9O4−δ+PbZr0.52Ti0.48O3 particulate composites by composite oscillator technique and the correlation with the results of magnetoelectric properties Journal of Advanced Ceramics. 1: 317-326. DOI: 10.1007/S40145-012-0032-Y |
0.425 |
|
| 2012 |
Rao BR, Gandhi AS, Vincent S, Bhatt J, Murty BS. Prediction of Glass Forming Ability Using Thermodynamic Parameters Transactions of the Indian Institute of Metals. 65: 559-563. DOI: 10.1007/S12666-012-0215-9 |
0.379 |
|
| 2012 |
Nandam SH, Charbhai N, Murty BS, Sankaran S. Microstructural and mechanical characterization of two aluminium based in situ composite foams Transactions of the Indian Institute of Metals. 65: 595-600. DOI: 10.1007/S12666-012-0214-X |
0.443 |
|
| 2012 |
Nayak SS, Kim DH, Pabi SK, Murty BS. Nanocomposites of Aluminum Alloys by Rapid Solidification Processing Transactions of the Indian Institute of Metals. 65: 647-651. DOI: 10.1007/S12666-012-0213-Y |
0.545 |
|
| 2012 |
Vincent S, Murty BS, Bhatt J. Prediction of Bulk Metallic Glass Formation in Cu–Zr–Ag–Hf System by Thermodynamic and Topological Modeling Transactions of the Indian Institute of Metals. 65: 827-831. DOI: 10.1007/S12666-012-0209-7 |
0.406 |
|
| 2012 |
Durga A, Kumar KCH, Murty BS. Phase Formation in Equiatomic High Entropy Alloys: CALPHAD Approach and Experimental Studies Transactions of the Indian Institute of Metals. 65: 375-380. DOI: 10.1007/S12666-012-0138-5 |
0.539 |
|
| 2012 |
Lombardi A, D’Elia F, Ravindran C, Sediako D, Murty BS, MacKay R. Interplay Between Residual Stresses, Microstructure, Process Variables and Engine Block Casting Integrity Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 43: 5258-5270. DOI: 10.1007/S11661-012-1340-0 |
0.386 |
|
| 2012 |
Das CR, Albert SK, Swaminathan J, Raju S, Bhaduri AK, Murty BS. Transition of crack from type IV to type II resulting from improved utilization of boron in the modified 9Cr-1Mo steel weldment Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 43: 3724-3741. DOI: 10.1007/S11661-012-1179-4 |
0.366 |
|
| 2012 |
Gupta RK, Darling KS, Raman RKS, Ravi KR, Koch CC, Murty BS, Scattergood RO. Synthesis, characterization and mechanical behaviour of an in situ consolidated nanocrystalline FeCrNi alloy Journal of Materials Science. 47: 1562-1566. DOI: 10.1007/S10853-011-5986-6 |
0.473 |
|
| 2012 |
Das CR, Albert SK, Bhaduri AK, Raj B, Swaminathan J, Murty BS. Improvement in creep resistance Of modified 9Cr-1Mo steel weldment By boron addition Welding in the World. 56: 10-17. DOI: 10.1007/Bf03321360 |
0.39 |
|
| 2012 |
Thangaraju S, Heilmaier M, Murty BS, Vadlamani SS. On the estimation of true hall-Petch constants and their role on the superposition law exponent in al alloys Advanced Engineering Materials. 14: 892-897. DOI: 10.1002/Adem.201200114 |
0.317 |
|
| 2011 |
Prasad ChS, Sreenivasulu G, Kiran SR, Balasubramanian M, Murty BS. Electrical and magnetic properties of nanocrystalline BiFeO3 prepared by high energy ball milling and microwave sintering. Journal of Nanoscience and Nanotechnology. 11: 4097-102. PMID 21780411 DOI: 10.1166/Jnn.2011.3852 |
0.334 |
|
| 2011 |
Abdallah E, Ravindran C, Murty BS. Effect of Al-Ti-B Based Master Alloys on Grain Refinement and Hot Tearing Susceptibility of AZ91E Magnesium Alloy Materials Science Forum. 690: 351-354. DOI: 10.4028/Www.Scientific.Net/Msf.690.351 |
0.541 |
|
| 2011 |
Shanmugasundaram T, Heilmaier M, Sarma VS, Murty BS. Thermal Stability of Vacuum Hot Pressed Bulk Nanostructured Al-Cu Alloys Materials Science Forum. 690: 234-237. DOI: 10.4028/Www.Scientific.Net/Msf.690.234 |
0.536 |
|
| 2011 |
Bhatt J, Kumar S, Murty BS. Thermodynamic Model and Synthesis of Bulk Metallic Glass in Cu-Zr-Ti System by Mechanical Alloying Materials Science Forum. 189-192. DOI: 10.4028/Www.Scientific.Net/Msf.675-677.189 |
0.468 |
|
| 2011 |
Ramana MV, Kiran SR, Reddy NR, Kumar KVS, Murthy VRK, Murty BS. Synthesis Of Lead Free Sodium Bismuth Titanate (Nbt) Ceramic By Conventional And Microwave Sintering Methods Journal of Advanced Dielectrics. 1: 71-77. DOI: 10.1142/S2010135X11000094 |
0.399 |
|
| 2011 |
Saravanan MSS, Babu SPK, Sivaprasad K, Ravisankar B, Susila P, Murty BS. Consolidation of CNT reinforced AA4032 nanocomposites by ECAP International Journal of Nanoscience. 10: 233-236. DOI: 10.1142/S0219581X11007818 |
0.512 |
|
| 2011 |
Ramana MV, Reddy NR, Kumar KVS, Murthy VRK, Murty BS. MAGNETO-ELECTRIC EFFECT IN MULTIFERROIC Ni0.93Co0.02Mn0.05Fe1.95O4-δ/PbZr0.52Ti0.48O3 PARTICULATE COMPOSITES: DIELECTRIC, PIEZOELECTRIC PROPERTIES Modern Physics Letters B. 25: 345-358. DOI: 10.1142/S0217984911025742 |
0.373 |
|
| 2011 |
Prashanth KG, Kumar S, Scudino S, Murty BS, Eckert J. Fabrication and Response of Al70Y16Ni10Co4Glass Reinforced Metal Matrix Composites Materials and Manufacturing Processes. 26: 1242-1247. DOI: 10.1080/10426914.2010.544824 |
0.412 |
|
| 2011 |
Bhaduri AK, Das CR, Albert SK, Klenk A, Murty BS. Study of deformation behavior of simulated inter-critical heat-affected zones of modified 9Cr-1Mo steel Materials and Manufacturing Processes. 26: 62-65. DOI: 10.1080/10426910903206725 |
0.344 |
|
| 2011 |
Nayak SS, Chang HJ, Kim DH, Pabi SK, Murty BS. Formation of metastable phases and nanocomposite structures in rapidly solidified Al–Fe alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 528: 5967-5973. DOI: 10.1016/J.Msea.2011.04.028 |
0.506 |
|
| 2011 |
Susila P, Sturm D, Heilmaier M, Murty BS, Sarma VS. Effect of yttria particle size on the microstructure and compression creep properties of nanostructured oxide dispersion strengthened ferritic (Fe–12Cr–2W–0.5Y2O3) alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 528: 4579-4584. DOI: 10.1016/J.Msea.2011.02.078 |
0.529 |
|
| 2011 |
Surekha K, Murty BS, Rao KP. Comparison of corrosion behaviour of friction stir processed and laser melted AA 2219 aluminium alloy Materials & Design. 32: 4502-4508. DOI: 10.1016/J.Matdes.2011.03.033 |
0.45 |
|
| 2011 |
Ramana MV, Kiran SR, Reddy NR, Kumar KVS, Murthy VRK, Murty BS. Investigation and characterization of Pb(Zr0.52Ti0.48)O3 nanocrystalline ferroelectric ceramics: By conventional and microwave sintering methods Materials Chemistry and Physics. 126: 295-300. DOI: 10.1016/J.Matchemphys.2010.11.023 |
0.413 |
|
| 2011 |
Vincent S, Peshwe DR, Murty BS, Bhatt J. Thermodynamic prediction of bulk metallic glass forming alloys in ternary Zr-Cu-X (X=Ag, Al, Ti, Ga) systems Journal of Non-Crystalline Solids. 357: 3495-3499. DOI: 10.1016/J.Jnoncrysol.2011.06.024 |
0.413 |
|
| 2011 |
Udhayabanu V, Ravi KR, Murty BS. Development of in situ NiAl–Al2O3 nanocomposite by reactive milling and spark plasma sintering Journal of Alloys and Compounds. 509. DOI: 10.1016/J.Jallcom.2010.12.091 |
0.406 |
|
| 2011 |
Singh S, Wanderka N, Murty BS, Glatzel U, Banhart J. Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy Acta Materialia. 59: 182-190. DOI: 10.1016/J.Actamat.2010.09.023 |
0.543 |
|
| 2011 |
Udhayabanu V, Murty BS. Synthesis of Nanocrystalline α-Al2O3 from Nanocrystalline Boehmite Derived from High Energy Ball Milling of Gibbiste Transactions of the Indian Institute of Metals. 64: 535-540. DOI: 10.1007/S12666-011-0086-5 |
0.327 |
|
| 2011 |
Nandam SH, Sankaran S, Murty BS. Precipitation kinetics in Al-Si-Mg/TiB 2 in-situ composites Transactions of the Indian Institute of Metals. 64: 123-126. DOI: 10.1007/S12666-011-0024-6 |
0.457 |
|
| 2011 |
Charbhai N, Murty BS, Sankaran S. Characterization of microstructure and precipitation behavior in Al-4Cu-xTiB 2 in-situ composite Transactions of the Indian Institute of Metals. 64: 117-121. DOI: 10.1007/S12666-011-0023-7 |
0.458 |
|
| 2011 |
Lombardi A, D’Elia F, Ravindran C, Murty BS, MacKay R. Analysis of the secondary phases in the microstructure of 319 type Al alloy engine blocks using electron microscopy and nanoindentation Transactions of the Indian Institute of Metals. 64: 7-11. DOI: 10.1007/S12666-011-0002-Z |
0.491 |
|
| 2011 |
Srivastav AK, Sankaranarayana M, Murty BS. Initial-stage sintering kinetics of nanocrystalline tungsten Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 3863-3866. DOI: 10.1007/S11661-011-0975-6 |
0.355 |
|
| 2011 |
Das CR, Albert SK, Bhaduri AK, Murty BS. Characterization of ferrite in tempered martensite of modified 9Cr-1Mo steel using the electron backscattered diffraction technique Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 3849-3852. DOI: 10.1007/S11661-011-0941-3 |
0.438 |
|
| 2011 |
Rao BR, Shah AK, Srinivas M, Bhatt J, Gandhi AS, Murty BS. On Prediction of Amorphous Phase Forming Compositions in the Iron-Rich Fe-Zr-B Ternary System and Their Synthesis Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 42: 3913-3920. DOI: 10.1007/S11661-011-0784-Y |
0.433 |
|
| 2011 |
Udhayabanu V, Ravi KR, Murugan K, Sivaprahasam D, Murty BS. Development of Ni-Al 2 O 3 In-Situ Nanocomposite by Reactive Milling and Spark Plasma Sintering Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 42: 2085-2093. DOI: 10.1007/S11661-011-0602-6 |
0.5 |
|
| 2011 |
Ravi KR, Manivannan S, Phanikumar G, Murty BS, Sundarraj S. Influence of Mg on grain refinement of near eutectic Al-Si alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 2028-2039. DOI: 10.1007/S11661-010-0600-0 |
0.514 |
|
| 2011 |
Elsayed A, Ravindran C, Murty BS. Effect of Aluminum-Titanium-Boron Based Grain Refiners on AZ91E Magnesium Alloy Grain Size and Microstructure International Journal of Metalcasting. 5: 29-41. DOI: 10.1007/BF03355470 |
0.397 |
|
| 2010 |
Bhatt J, Murty BS. Identification of Bulk Metallic Forming Compositions through Thermodynamic and Topological Models Materials Science Forum. 649: 67-73. DOI: 10.4028/Www.Scientific.Net/Msf.649.67 |
0.439 |
|
| 2010 |
Kumar GSV, Murty BS, Chakraborty M. Settling behaviour of TiAl3, TiB2, TiC and AlB2 particles in liquid Al during grain refinement International Journal of Cast Metals Research. 23: 193-204. DOI: 10.1179/136404610X12665088537491 |
0.347 |
|
| 2010 |
Ramana MV, Reddy MP, Reddy NR, Kumar KVS, Murthy VRK, Murty BS. Nanocrystalline Pb(Zr 0.52 Ti 0.48 )O 3 ferroelectric ceramics: mechanical and electrical properties Journal of Nanomaterials. 2010: 41. DOI: 10.1155/2010/783043 |
0.451 |
|
| 2010 |
Ramana MV, Reddy NR, Murty BS, Murthy VRK, Kumar KVS. Ferromagnetic-Dielectric Ni 0.5 Zn 0.5 Fe 1.9 O 4−δ /PbZr 0.52 Ti 0.48 O 3 Particulate Composites: Electric, Magnetic, Mechanical, and Electromagnetic Properties Advances in Condensed Matter Physics. 2010: 1-14. DOI: 10.1155/2010/763406 |
0.392 |
|
| 2010 |
Susila P, Sturm D, Heilmaier M, Murty BS, Sarma VS. Compression creep studies of mechanically alloyed nanostructured Fe-12Cr-2W-0.25Y2O3ODS alloy Journal of Physics: Conference Series. 240: 012090. DOI: 10.1088/1742-6596/240/1/012090 |
0.391 |
|
| 2010 |
Prashanth KG, Murty BS. Production, Kinetic Study and Properties of Fe-Based Glass and Its Composites Materials and Manufacturing Processes. 25: 592-597. DOI: 10.1080/10426910903536808 |
0.439 |
|
| 2010 |
Kumar S, Sarma VS, Murty BS. High temperature wear behavior of Al-4Cu-TiB2 in situ composites Wear. 268: 1266-1274. DOI: 10.1016/J.Wear.2010.01.022 |
0.47 |
|
| 2010 |
Shanmugasundaram T, Heilmaier M, Murty BS, Sarma VS. On the Hall–Petch relationship in a nanostructured Al–Cu alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 527: 7821-7825. DOI: 10.1016/J.Msea.2010.08.070 |
0.495 |
|
| 2010 |
Mukherjee D, Ande V, Manna R, Murty BS, Mukhopadhyay NK. Formation of nanostructured and amorphous β-Al3Mg2 based alloys by rapid solidification and mechanical milling Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 527: 5078-5083. DOI: 10.1016/J.Msea.2010.04.056 |
0.561 |
|
| 2010 |
Nayak SS, Wollgarten M, Banhart J, Pabi SK, Murty BS. Nanocomposites and an extremely hard nanocrystalline intermetallic of Al–Fe alloys prepared by mechanical alloying Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 527: 2370-2378. DOI: 10.1016/J.Msea.2009.12.044 |
0.56 |
|
| 2010 |
Varalakshmi S, Kamaraj M, Murty BS. Processing and properties of nanocrystalline CuNiCoZnAlTi high entropy alloys by mechanical alloying Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 527: 1027-1030. DOI: 10.1016/J.Msea.2009.09.019 |
0.562 |
|
| 2010 |
Khatirkar RK, Murty BS. Structural changes in iron powder during ball milling Materials Chemistry and Physics. 123: 247-253. DOI: 10.1016/J.Matchemphys.2010.04.004 |
0.375 |
|
| 2010 |
Udhayabanu V, Singh N, Murty BS. Mechanical activation of aluminothermic reduction of NiO by high energy ball milling Journal of Alloys and Compounds. 497: 142-146. DOI: 10.1016/J.Jallcom.2010.03.089 |
0.355 |
|
| 2010 |
Nayak SS, Pabi SK, Murty BS. Al-(L12)Al3Ti nanocomposites prepared by mechanical alloying: Synthesis and mechanical properties Journal of Alloys and Compounds. 492: 128-133. DOI: 10.1016/J.Jallcom.2009.10.274 |
0.514 |
|
| 2010 |
Nayak SS, Pabi SK, Kim DH, Murty BS. Microstructure-hardness relationship of Al–(L12)Al3Ti nanocomposites prepared by rapid solidification processing Intermetallics. 18: 487-492. DOI: 10.1016/J.Intermet.2009.09.009 |
0.525 |
|
| 2010 |
Udhayabanu V, Ravi KR, Vinod V, Murty BS. Synthesis of in-situ NiAl–Al2O3 nanocomposite by reactive milling and subsequent heat treatment Intermetallics. 18: 353-358. DOI: 10.1016/J.Intermet.2009.08.006 |
0.403 |
|
| 2010 |
Timpel M, Wanderka N, Murty BS, Banhart J. Three-dimensional visualization of the microstructure development of Sr-modified Al–15Si casting alloy using FIB-EsB tomography Acta Materialia. 58: 6600-6608. DOI: 10.1016/J.Actamat.2010.08.021 |
0.483 |
|
| 2010 |
Murty BS, Phanikumar G. Microstructure engineering of materials International Journal of Advances in Engineering Sciences and Applied Mathematics. 2: 125-125. DOI: 10.1007/S12572-011-0046-7 |
0.428 |
|
| 2010 |
Varalakshmi S, Kamaraj M, Murty BS. Formation and stability of equiatomic and nonequiatomic nanocrystalline CuNiCoZnAlTi high-entropy alloys by mechanical alloying Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 41: 2703-2709. DOI: 10.1007/S11661-010-0344-X |
0.559 |
|
| 2010 |
Kumar GSV, Murty BS, Chakraborty M. Effect of TiAl3 particles size and distribution on their settling and dissolution behaviour in aluminium Journal of Materials Science. 45: 2921-2929. DOI: 10.1007/S10853-010-4284-Z |
0.436 |
|
| 2010 |
Susila P, Sturm D, Heilmaier M, Murty BS, Sarma VS. Microstructural studies on nanocrystalline oxide dispersion strengthened austenitic (Fe–18Cr–8Ni–2W–0.25Y2O3) alloy synthesized by high energy ball milling and vacuum hot pressing Journal of Materials Science. 45: 4858-4865. DOI: 10.1007/S10853-010-4264-3 |
0.565 |
|
| 2010 |
Varalakshmi S, Rao GA, Kamaraj M, Murty BS. Hot consolidation and mechanical properties of nanocrystalline equiatomic AlFeTiCrZnCu high entropy alloy after mechanical alloying Journal of Materials Science. 45: 5158-5163. DOI: 10.1007/S10853-010-4246-5 |
0.542 |
|
| 2009 |
Lalam SV, Reddy GM, Mohandas T, Kamaraj M, Murty BS. Continuous drive friction welding of Inconel 718 and EN24 dissimilar metal combination Materials Science and Technology. 25: 851-861. DOI: 10.1179/174328408X369384 |
0.399 |
|
| 2009 |
Sreenivasulu G, Babu VH, Markandeyulu G, Murty BS. Magnetoelectric effect of (100−x)BaTiO3–(x)NiFe1.98O4 (x=20–80 wt %) particulate nanocomposites Applied Physics Letters. 94: 112902. DOI: 10.1063/1.3095600 |
0.321 |
|
| 2009 |
Mandal A, Murty BS, Chakraborty M. Sliding wear behaviour of T6 treated A356–TiB2 in-situ composites Wear. 266: 865-872. DOI: 10.1016/J.Wear.2008.12.011 |
0.404 |
|
| 2009 |
Chattopadhyay A, Sarma VS, Murty BS, Haldar A, Bhattacharjee D. Studies on hot rolled galvanized steel sheets: Effect of reheating on galvanizing Surface & Coatings Technology. 203: 3465-3471. DOI: 10.1016/J.Surfcoat.2009.05.005 |
0.302 |
|
| 2009 |
Surekha K, Murty BS, Rao KP. Effect of processing parameters on the corrosion behaviour of friction stir processed AA 2219 aluminum alloy Solid State Sciences. 11: 907-917. DOI: 10.1016/J.Solidstatesciences.2008.11.007 |
0.445 |
|
| 2009 |
Prashanth KG, Scudino S, Surreddi KB, Sakaliyska M, Murty BS, Eckert J. Crystallization kinetics of Zr65Ag5Cu12.5Ni10Al7.5 glassy powders produced by ball milling of pre-alloyed ingots Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 513: 279-285. DOI: 10.1016/J.Msea.2009.01.075 |
0.485 |
|
| 2009 |
Mandal A, Murty BS, Chakraborty M. Wear behaviour of near eutectic Al–Si alloy reinforced with in-situ TiB2 particles Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 506: 27-33. DOI: 10.1016/J.Msea.2008.11.007 |
0.484 |
|
| 2009 |
Praveenkumar B, Sreenivasalu G, Kumar HH, Kharat DK, Balasubramanian M, Murty BS. Size effect studies on nanocrystalline Pb(Zr0.53Ti0.47)O3 synthesized by mechanical activation route Materials Chemistry and Physics. 117: 338-342. DOI: 10.1016/J.Matchemphys.2009.06.032 |
0.396 |
|
| 2009 |
Singh S, Godkhindi MM, Krishnarao RV, Murty BS. Effect of milling energy on mechanical activation of (Mo + Si3N4) powders during the synthesis of Si3N4―MoSi2 in situ composites Journal of the European Ceramic Society. 29: 2069-2077. DOI: 10.1016/J.Jeurceramsoc.2008.11.005 |
0.39 |
|
| 2009 |
Rao AKP, Das K, Murty BS, Chakraborty M. Al–Ti–C–Sr master alloy—A melt inoculant for simultaneous grain refinement and modification of hypoeutectic Al–Si alloys Journal of Alloys and Compounds. 480. DOI: 10.1016/J.Jallcom.2009.02.147 |
0.565 |
|
| 2009 |
Kumar S, Sarma VS, Murty BS. The influence of room temperature and cryogenic temperature rolling on the aging and wear behaviour of Al-4Cu-5TiB2 in situ composites Journal of Alloys and Compounds. 479: 268-273. DOI: 10.1016/J.Jallcom.2008.12.153 |
0.411 |
|
| 2009 |
Prashanth K, Scudino S, Murty B, Eckert J. Crystallization kinetics and consolidation of mechanically alloyed Al70Y16Ni10Co4 glassy powders Journal of Alloys and Compounds. 477: 171-177. DOI: 10.1016/J.Jallcom.2008.10.055 |
0.549 |
|
| 2009 |
Kumar GSV, Murty BS, Chakraborty M. Grain refinement response of LM25 alloy towards Al–Ti–C and Al–Ti–B grain refiners Journal of Alloys and Compounds. 472: 112-120. DOI: 10.1016/J.Jallcom.2008.04.095 |
0.512 |
|
| 2009 |
Ramanaa MV, Reddy NR, Sreenivasulu G, kumar KVS, Murty BS, Murthy VRK. Enhanced mangnetoelectric voltage in multiferroic particulate Ni0.83Co0.15Cu0.02Fe1.9O4- δ/PbZr0.52Ti0.48O3 composites - dielectric, piezoelectric and magnetic properties Current Applied Physics. 9: 1134-1139. DOI: 10.1016/J.Cap.2009.01.002 |
0.373 |
|
| 2009 |
Mondal K, Kumar A, Gupta G, Murty B. Temperature and structure dependency of solid–liquid interfacial energy Acta Materialia. 57: 3422-3430. DOI: 10.1016/J.Actamat.2009.03.051 |
0.318 |
|
| 2009 |
Scudino S, Liu G, Prashanth K, Bartusch B, Surreddi K, Murty B, Eckert J. Mechanical properties of Al-based metal matrix composites reinforced with Zr-based glassy particles produced by powder metallurgy Acta Materialia. 57: 2029-2039. DOI: 10.1016/J.Actamat.2009.01.010 |
0.452 |
|
| 2009 |
Bhatt J, Murty BS. Thermodynamic modeling of Zr-Ti-Cu-Ni-Be bulk metallic glass Transactions of the Indian Institute of Metals. 62: 413-416. DOI: 10.1007/S12666-009-0056-3 |
0.412 |
|
| 2009 |
Kumar S, Subramaniya Sarma V, Murty B. Functionally Graded Al Alloy Matrix In-Situ Composites Metallurgical and Materials Transactions A. 41: 242-254. DOI: 10.1007/S11661-009-0063-3 |
0.521 |
|
| 2009 |
Shanmugasundaram T, Heilmaier M, Murty BS, Sarma VS. Microstructure and Mechanical Properties of Nanostructured Al-4Cu Alloy Produced by Mechanical Alloying and Vacuum Hot Pressing Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 40: 2798-2801. DOI: 10.1007/S11661-009-0005-0 |
0.543 |
|
| 2008 |
Prakash T, Prasad KP, Ramasamy S, Murty BS. Optical and electrical properties of mechanochemically synthesized nanocrystalline delafossite CuAlO2. Journal of Nanoscience and Nanotechnology. 8: 4273-8. PMID 19049217 |
0.303 |
|
| 2008 |
Shanmugasundaram T, Sarma VS, Murty BS, Heilmaier M. High Strength Bulk Nanostructured 2219 Al Alloy Produced by High Energy Ball Milling and Hot Pressing Materials Science Forum. 97-101. DOI: 10.4028/Www.Scientific.Net/Msf.584-586.97 |
0.558 |
|
| 2008 |
Das N, Kulkarni UD, Pabi SK, Murty BS, Dey GK. Development of a Thermodynamic Criterion to Predict the Alloy Compositions for Amorphous and Nanocrystalline Phase Formation during Mechanical Alloying Defect and Diffusion Forum. 279: 147-151. DOI: 10.4028/Www.Scientific.Net/Ddf.279.147 |
0.546 |
|
| 2008 |
Dev S, Murty BS, Rao KP. Effects of base and filler chemistry and weld techniques on equiaxed zone formation in Al–Zn–Mg alloy welds Science and Technology of Welding and Joining. 13: 598-606. DOI: 10.1179/174329308X300163 |
0.443 |
|
| 2008 |
Kumar S, Chakraborty M, Sarma VS, Murty BS. Tensile and wear behaviour of in situ Al-7Si/TiB2 particulate composites Wear. 265: 134-142. DOI: 10.1016/J.Wear.2007.09.007 |
0.47 |
|
| 2008 |
Rao AKP, Das K, Murty BS, Chakraborty M. Microstructure and the wear mechanism of grain-refined aluminum during dry sliding against steel disc Wear. 264: 638-647. DOI: 10.1016/J.Wear.2007.05.010 |
0.482 |
|
| 2008 |
Surekha K, Murty BS, Rao KP. Microstructural characterization and corrosion behavior of multipass friction stir processed AA2219 aluminium alloy Surface & Coatings Technology. 202: 4057-4068. DOI: 10.1016/J.Surfcoat.2008.02.001 |
0.478 |
|
| 2008 |
Chattopadhyay A, Sarma VS, Murty BS, Haldar A, Bhattacharjee D. Studies on hot-rolled galvanized steel sheets: Segregation of alloying elements at the surface Scripta Materialia. 59: 522-525. DOI: 10.1016/J.Scriptamat.2008.04.040 |
0.45 |
|
| 2008 |
Mandal A, Chakraborty M, Murty BS. Ageing behaviour of A356 alloy reinforced with in-situ formed TiB2 particles Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 489: 220-226. DOI: 10.1016/J.Msea.2008.01.042 |
0.475 |
|
| 2008 |
Das CR, Albert SK, Bhaduri AK, Srinivasan G, Murty BS. Effect of prior microstructure on microstructure and mechanical properties of modified 9Cr-1Mo steel weld joints Materials Science and Engineering A. 477: 185-192. DOI: 10.1016/J.Msea.2007.05.017 |
0.421 |
|
| 2008 |
Kumar S, Sarma VS, Murty BS. A statistical analysis on erosion wear behaviour of A356 alloy reinforced with in situ formed TiB2 particles Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 476: 333-340. DOI: 10.1016/J.Msea.2007.04.113 |
0.417 |
|
| 2008 |
Rao AKP, Das K, Murty BS, Chakraborty M. On the modification and segregation behavior of Sb in Al–7Si alloy during solidification Materials Letters. 62: 2013-2016. DOI: 10.1016/J.Matlet.2007.11.005 |
0.497 |
|
| 2008 |
Rao AKP, Das K, Murty BS, Chakraborty M. Microstructural features of as-cast A356 alloy inoculated with Sr, Sb modifiers and Al–Ti–C grain refiner simultaneously Materials Letters. 62: 273-275. DOI: 10.1016/J.Matlet.2007.05.020 |
0.51 |
|
| 2008 |
Praveenkumar B, Kumar HH, Kharat DK, Murty BS. Investigation and characterization of La-doped PZT nanocrystalline ceramic prepared by mechanical activation route Materials Chemistry and Physics. 112: 31-34. DOI: 10.1016/J.Matchemphys.2008.04.009 |
0.417 |
|
| 2008 |
Basu J, Murty BS, Ranganathan S. Glass forming ability: Miedema approach to (Zr, Ti, Hf)–(Cu, Ni) binary and ternary alloys Journal of Alloys and Compounds. 465: 163-172. DOI: 10.1016/J.Jallcom.2007.10.131 |
0.513 |
|
| 2008 |
Abhik NC, Vivek R, Udhayabanu V, Murty BS. Influence of heat of formation of B2/L12 intermetallic compounds on the milling energy for their formation during mechanical alloying Journal of Alloys and Compounds. 465: 106-112. DOI: 10.1016/J.Jallcom.2007.10.076 |
0.449 |
|
| 2008 |
Varalakshmi S, Kamaraj M, Murty BS. Synthesis and characterization of nanocrystalline AlFeTiCrZnCu high entropy solid solution by mechanical alloying Journal of Alloys and Compounds. 460: 253-257. DOI: 10.1016/J.Jallcom.2007.05.104 |
0.541 |
|
| 2008 |
Mondal K, Chatterjee UK, Murty BS. Oxidation behavior of amorphous and nanoquasicrystalline Zr–Pd and Zr–Pt alloys Journal of Alloys and Compounds. 460: 172-181. DOI: 10.1016/J.Jallcom.2007.05.058 |
0.469 |
|
| 2008 |
Ravi KR, Saravanan M, Pillai RM, Mandal A, Murty BS, Chakraborty M, Pai BC. Equal channel angular pressing of Al–5 wt% TiB2 in situ composite Journal of Alloys and Compounds. 459: 239-243. DOI: 10.1016/J.Jallcom.2007.05.025 |
0.367 |
|
| 2008 |
Bhatt J, Murty BS. On the conditions for the synthesis of bulk metallic glasses by mechanical alloying Journal of Alloys and Compounds. 459: 135-141. DOI: 10.1016/J.Jallcom.2007.04.242 |
0.523 |
|
| 2008 |
Mondal K, Murty BS. Determination of kinetic parameters for devitrification of metallic glass — A theoretical approach Transactions of the Indian Institute of Metals. 61: 319-324. DOI: 10.1007/S12666-008-0045-Y |
0.331 |
|
| 2008 |
Nayak SS, Murty BS, Pabi SK. Structure of nanocomposites of Al-Fe alloys prepared by mechanical alloying and rapid solidification processing Bulletin of Materials Science. 31: 449-454. DOI: 10.1007/S12034-008-0070-9 |
0.518 |
|
| 2008 |
Kumar S, Subramanya Sarma V, Murty B. Effect of Temperature on the Wear Behavior of Al-7Si-TiB2 In-Situ Composites Metallurgical and Materials Transactions A. 40: 223-231. DOI: 10.1007/S11661-008-9696-X |
0.471 |
|
| 2008 |
Bhatt J, Dey GK, Murty BS. Thermodynamic and Topological Modeling and Synthesis of Cu-Zr-Ti-Ni–Based Bulk Metallic Glasses by Mechanical Alloying Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 39: 1543-1551. DOI: 10.1007/S11661-007-9354-8 |
0.456 |
|
| 2007 |
Vinod Kumar GS, GarcÃa-Moreno F, Babcsán N, Brothers AH, Murty BS, Banhart J. Study on aluminium-based single films. Physical Chemistry Chemical Physics : Pccp. 9: 6415-25. PMID 18060172 DOI: 10.1039/B710497A |
0.326 |
|
| 2007 |
Venugopal T, Rao KP, Murty BS. Synthesis of Cu-W nanocomposite by high-energy ball milling. Journal of Nanoscience and Nanotechnology. 7: 2376-81. PMID 17663255 DOI: 10.1166/Jnn.2007.418 |
0.38 |
|
| 2007 |
Bhatt J, Pabi SK, Murty BS. Nanoindentation studies on amorphous, nanoquasicrystalline and nanocrystalline Zr8oPt2o and Zr75Pd25 alloys. Journal of Nanoscience and Nanotechnology. 7: 658-62. PMID 17450810 DOI: 10.1166/Jnn.2007.118 |
0.527 |
|
| 2007 |
Takeuchi A, Murty BS, Hasegawa M, Ranganathan S, Inoue A. Analysis of Bulk Metallic Glass Formation Using a Tetrahedron Composition Diagram that Consists of Constituent Classes Based on Blocks of Elements in the Periodic Table Materials Transactions. 48: 1304-1312. DOI: 10.2320/Matertrans.Mf200604 |
0.385 |
|
| 2007 |
Malewar R, Kumar KS, Murty BS, Sarma B, Pabi SK. On sinterability of nanostructured W produced by high-energy ball milling Journal of Materials Research. 22: 1200-1206. DOI: 10.1557/Jmr.2007.0166 |
0.428 |
|
| 2007 |
Ramana MV, Sreenivasulu G, Reddy NR, Kumar KVS, Murty BS, Murthy VRK. Internal friction and longitudinal modulus behaviour of multiferroic PbZr0.52Ti0.48O3+Ni0.93Co0.02Mn0.05Fe1.95O4−δ particulate composites Journal of Physics D. 40: 7565-7571. DOI: 10.1088/0022-3727/40/23/049 |
0.409 |
|
| 2007 |
Mandal A, Chakraborty M, Murty BS. Effect of TiB2 particles on sliding wear behaviour of Al-4Cu alloy Wear. 262: 160-166. DOI: 10.1016/J.Wear.2006.04.003 |
0.509 |
|
| 2007 |
Kumar S, Sarma VS, Murty BS. Influence of in situ formed TiB2 particles on the abrasive wear behaviour of Al-4Cu alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 465: 160-164. DOI: 10.1016/J.Msea.2007.02.117 |
0.458 |
|
| 2007 |
Dev S, Stuart AA, Kumaar RCRD, Murty BS, Rao KP. Effect of scandium additions on microstructure and mechanical properties of Al–Zn–Mg alloy welds Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 467: 132-138. DOI: 10.1016/J.Msea.2007.02.080 |
0.511 |
|
| 2007 |
Bhatt J, Kumar S, Dong C, Murty BS. Tribological behaviour of Cu60Zr30Ti10 bulk metallic glass Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 458: 290-294. DOI: 10.1016/J.Msea.2006.12.060 |
0.375 |
|
| 2007 |
Sahni S, Reddy SB, Murty BS. Influence of process parameters on the synthesis of nano-titania by sol–gel route Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 452: 758-762. DOI: 10.1016/J.Msea.2006.11.005 |
0.31 |
|
| 2007 |
Rao BS, Bhatt J, Murty BS. Identification of compositions with highest glass forming ability in multicomponent systems by thermodynamic and topological approaches Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 449: 211-214. DOI: 10.1016/J.Msea.2005.12.092 |
0.376 |
|
| 2007 |
Mondal K, Chatterjee UK, Murty BS. Oxidation behavior of multicomponent Zr-based amorphous alloys Journal of Alloys and Compounds. 433: 162-170. DOI: 10.1016/J.Jallcom.2006.06.061 |
0.409 |
|
| 2007 |
Joardar J, Pabi SK, Murty BS. Milling criteria for the synthesis of nanocrystalline NiAl by mechanical alloying Journal of Alloys and Compounds. 429: 204-210. DOI: 10.1016/J.Jallcom.2006.04.045 |
0.445 |
|
| 2007 |
Bhatt J, Jiang W, Junhai X, Qing W, Dong C, Murty BS. Optimization of bulk metallic glass forming compositions in Zr–Cu–Al system by thermodynamic modeling Intermetallics. 15: 716-721. DOI: 10.1016/J.Intermet.2006.10.018 |
0.331 |
|
| 2007 |
Nayak SS, Pabi SK, Murty BS. High strength nanocrystalline L12-Al3(Ti,Zr) intermetallic synthesized by mechanical alloying Intermetallics. 15: 26-33. DOI: 10.1016/J.Intermet.2006.02.003 |
0.494 |
|
| 2007 |
Venugopal T, Rao KP, Murty BS. Mechanical and electrical properties of Cu-Ta nanocomposites prepared by high-energy ball milling Acta Materialia. 55: 4439-4445. DOI: 10.1016/J.Actamat.2007.04.025 |
0.421 |
|
| 2006 |
Mondal K, Chatterjee UK, Murty BS. Surface oxides and their effect on the oxidation behavior of amorphous and nanoquasicrystalline Zr–Pd and Zr–Pt alloys Journal of Materials Research. 21: 639-646. DOI: 10.1557/Jmr.2006.0084 |
0.392 |
|
| 2006 |
Rao AKP, Das K, Murty BS, Chakraborty M. Microstructural and wear behavior of hypoeutectic Al–Si alloy (LM25) grain refined and modified with Al–Ti–C–Sr master alloy Wear. 261: 133-139. DOI: 10.1016/J.Wear.2005.09.012 |
0.549 |
|
| 2006 |
Shanmugasundaram T, Murty BS, Sarma VS. Development of ultrafine grained high strength Al-Cu alloy by cryorolling Scripta Materialia. 54: 2013-2017. DOI: 10.1016/J.Scriptamat.2006.03.012 |
0.535 |
|
| 2006 |
Mondal K, Murty BS. Prediction of maximum homogeneous nucleation temperature for crystallization of metallic glasses Journal of Non-Crystalline Solids. 352: 5257-5264. DOI: 10.1016/J.Jnoncrysol.2006.09.003 |
0.354 |
|
| 2006 |
Mondal K, Murty BS, Chatterjee UK. Electrochemical behavior of multicomponent amorphous and nanocrystalline Zr-based alloys in different environments Corrosion Science. 48: 2212-2225. DOI: 10.1016/J.Corsci.2005.09.001 |
0.522 |
|
| 2005 |
Rao AKP, Murty BS, Chakraborty M. Improvement in tensile strength and load bearing capacity during dry wear of Al-7Si alloy by combined grain refinement and modification Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 395: 323-326. DOI: 10.1016/J.Msea.2004.12.053 |
0.524 |
|
| 2005 |
Venugopal T, Rao KP, Murty BS. Synthesis of copper–alumina nanocomposite by reactive milling Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 393: 382-386. DOI: 10.1016/J.Msea.2004.10.035 |
0.334 |
|
| 2005 |
Reddy NS, Rao AKP, Chakraborty M, Murty BS. Prediction of grain size of Al–7Si Alloy by neural networks Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 391: 131-140. DOI: 10.1016/J.Msea.2004.08.042 |
0.444 |
|
| 2005 |
Mondal K, Murty BS. On the parameters to assess the glass forming ability of liquids Journal of Non-Crystalline Solids. 351: 1366-1371. DOI: 10.1016/J.Jnoncrysol.2005.03.006 |
0.356 |
|
| 2005 |
Kumar GSV, Murty BS, Chakraborty M. Development of Al-Ti-C grain refiners and study of their grain refining efficiency on Al and Al-7Si alloy Journal of Alloys and Compounds. 396: 143-150. DOI: 10.1016/J.Jallcom.2004.12.039 |
0.511 |
|
| 2005 |
Mondal K, Murty BS, Chatterjee UK. Electrochemical behaviour of amorphous and nanoquasicrystalline Zr–Pd and Zr–Pt alloys in different environments Corrosion Science. 47: 2619-2635. DOI: 10.1016/J.Corsci.2004.11.006 |
0.473 |
|
| 2005 |
Das N, Dey GK, Murty BS, Pabi SK. On amorphization and nanocomposite formation in Al-Ni-Ti system by mechanical alloying Pramana. 65: 831-840. DOI: 10.1007/BF02704082 |
0.431 |
|
| 2004 |
Murty BS, Hono K. On the criteria for the formation of nanoquasicrystalline phase Applied Physics Letters. 84: 1674-1676. DOI: 10.1063/1.1667265 |
0.441 |
|
| 2004 |
Mukhopadhyay NK, Bhatt J, Pramanick AK, Murty BS, Paufler P. Synthesis of nanocrystalline/quasicrystalline Mg32(Al,Zn)49by melt spinning and mechanical milling Journal of Materials Science. 39: 5155-5159. DOI: 10.1023/B:Jmsc.0000039202.27103.4C |
0.43 |
|
| 2004 |
Rao AKP, Das K, Murty BS, Chakraborty M. Effect of grain refinement on wear properties of Al and Al–7Si alloy Wear. 257: 148-153. DOI: 10.1016/J.Wear.2003.10.017 |
0.523 |
|
| 2004 |
Joardar J, Pabi SK, Murty BS. Estimation of entrapped powder temperature during mechanical alloying Scripta Materialia. 50: 1199-1202. DOI: 10.1016/J.Scriptamat.2004.02.011 |
0.472 |
|
| 2004 |
Mandal A, Maiti R, Chakraborty M, Murty BS. Effect of TiB2 particles on aging response of Al–4Cu alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 386: 296-300. DOI: 10.1016/J.Msea.2004.07.026 |
0.411 |
|
| 2004 |
Singh S, Godkhindi MM, Krishnarao RV, Murty BS. Effect of mechanical activation on synthesis of ultrafine Si3N4–MoSi2 in situ composites Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 382: 321-327. DOI: 10.1016/J.Msea.2004.05.015 |
0.363 |
|
| 2004 |
Nayak SS, Murty BS. Synthesis and stability of L12–Al3Ti by mechanical alloying Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 367: 218-224. DOI: 10.1016/J.Msea.2003.09.097 |
0.504 |
|
| 2004 |
Venkateswarlu K, Chakraborty M, Murty BS. Influence of thermo-mechanical processing of Al–5Ti–1B master alloy on its grain refining efficiency Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 364: 75-83. DOI: 10.1016/J.Msea.2003.08.022 |
0.503 |
|
| 2004 |
Mondal K, Chatterjee UK, Murty BS. Corrosion and oxidation behavior of amorphous and nanoquasicrystalline phases in Zr70Pd30 and Zr80Pt20 alloys Journal of Non-Crystalline Solids. 544-547. DOI: 10.1016/J.Jnoncrysol.2003.12.038 |
0.474 |
|
| 2004 |
Srinivas V, Barua P, Ghosh TB, Murty BS. Oxidation behavior of Al–Cu–Fe nanoquasicrystal powders Journal of Non-Crystalline Solids. 334: 540-543. DOI: 10.1016/J.Jnoncrysol.2003.12.037 |
0.424 |
|
| 2004 |
Murty BS, Rao RVK, Mukhopadhyay NK. Stability of quasicrystalline phase in Al–Cu–Fe, Al–Cu–Co and Al–Pd–Mn systems by high energy ball milling Journal of Non-Crystalline Solids. 334: 48-51. DOI: 10.1016/J.Jnoncrysol.2003.11.011 |
0.489 |
|
| 2004 |
Murty BS, Barua P, Srinivas V, Schurack F, Eckert J. Synthesis of (Al65Cu20Fe15)100−xSix quasicrystalline alloys by mechanical alloying Journal of Non-Crystalline Solids. 334: 44-47. DOI: 10.1016/J.Jnoncrysol.2003.11.010 |
0.514 |
|
| 2004 |
Sahoo KL, Das S, Murty BS. Formation of quasicrystalline related intermetallic compounds in conventionally cast Al–Fe–V–Si alloy Journal of Non-Crystalline Solids. 29-32. DOI: 10.1016/J.Jnoncrysol.2003.11.007 |
0.436 |
|
| 2004 |
Singh S, Godkhindi MM, Krishnarao RV, Murty BS. Synthesis of Si3N4–MoSi2 in situ composite from mechanically activated (Mo+Si3N4) powders Journal of Alloys and Compounds. 381: 254-257. DOI: 10.1016/J.Jallcom.2004.03.097 |
0.358 |
|
| 2003 |
Murty BS, Ping DH, Hono K, Kimura H, Inoue A. Microstructure of Rapidly Solidified High Strength Al94V4Fe2 Alloy Materials Transactions. 44: 1993-1998. DOI: 10.2320/Matertrans.44.1993 |
0.561 |
|
| 2003 |
Mondal K, Chatterjee UK, Murty BS. Gibb’s free energy for the crystallization of glass forming liquids Applied Physics Letters. 83: 671-673. DOI: 10.1063/1.1595725 |
0.425 |
|
| 2003 |
Sahoo KL, Das SK, Murty BS. Formation of novel microstructures in conventionally cast Al-Fe-V-Si alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 355: 193-200. DOI: 10.1016/S0921-5093(03)00064-9 |
0.494 |
|
| 2003 |
Venkateswarlu K, Das SK, Chakraborty M, Murty BS. Influence of thermo-mechanical treatment of Al/5Ti master alloy on its grain refining performance on aluminium Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 351: 237-243. DOI: 10.1016/S0921-5093(02)00842-0 |
0.526 |
|
| 2003 |
Murty BS, Datta MK, Pabi SK. Structure and thermal stability of nanocrystalline materials Sadhana-Academy Proceedings in Engineering Sciences. 28: 23-45. DOI: 10.1007/Bf02717124 |
0.348 |
|
| 2002 |
Barua P, Murty BS, Mathur BK, Srinivas V. Icosahedral Phase Formation Domain in Al–Cu–Fe System by Mechanical Alloying Journal of Materials Research. 17: 653-659. DOI: 10.1557/Jmr.2002.0093 |
0.461 |
|
| 2002 |
Murty BS, Kori SA, Chakraborty M. Grain refinement of aluminium and its alloys by heterogeneous nucleation and alloying International Materials Reviews. 47: 3-29. DOI: 10.1179/095066001225001049 |
0.517 |
|
| 2002 |
Joardar J, Pabi SK, Fecht H-, Murty BS. Stability of nanocrystalline disordered NiAl synthesized by mechanical alloying Philosophical Magazine Letters. 82: 469-475. DOI: 10.1080/09500830210145336 |
0.437 |
|
| 2002 |
Mukhopadhyay NK, Murthy GVS, Murty BS, Weatherly GC. Transformation of the decagonal quasicrystalline phase to a B2 crystalline phase in the Al-Cu-Co system by high-energy ball milling Philosophical Magazine Letters. 82: 383-392. DOI: 10.1080/09500830210137380 |
0.433 |
|
| 2002 |
Barua P, Murty BS, Mathur BK, Srinivas V. Nanostructured icosahedral phase formation in Al70Cu20Fe10 by mechanical alloying: Comprehensive study Journal of Applied Physics. 91: 5353-5359. DOI: 10.1063/1.1464206 |
0.482 |
|
| 2002 |
Mukhopadhyay NK, Murthy GVS, Murty BS, Weatherly GC. An investigation on the transformation of the decagonal phase to a B2 phase in Al–Cu–Co alloy during mechanical milling Journal of Alloys and Compounds. 342: 38-41. DOI: 10.1016/S0925-8388(02)00129-9 |
0.423 |
|
| 2001 |
Datta MK, Pabi SK, Murty BS. Thermal stability of nanocrystalline fcc and hcp Ni(Si) synthesized by mechanical alloying of Ni90Si10 Philosophical Magazine Letters. 81: 77-84. DOI: 10.1080/095008301300006717 |
0.47 |
|
| 2001 |
Takagi T, Ohkubo T, Hirotsu Y, Murty BS, Hono K, Shindo D. Local structure of amorphous Zr70Pd30 alloy studied by electron diffraction Applied Physics Letters. 79: 485-487. DOI: 10.1063/1.1383055 |
0.421 |
|
| 2001 |
Murty BS, Hono K. Nanoquasicrystallization of Zr-based metallic glasses Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 312: 253-261. DOI: 10.1016/S0921-5093(00)01861-X |
0.447 |
|
| 2001 |
Barua P, Murty BS, Srinivas V. Mechanical alloying of Al-Cu-Fe elemental powders Materials Science and Engineering A. 304: 863-866. DOI: 10.1016/S0921-5093(00)01621-X |
0.553 |
|
| 2001 |
Murty BS, Ping DH, Hono K, Inoue A. APFIM and TEM study of the oxygen behavior during crystallization of Zr65Cu27.5Al7.5 metallic glass Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 706-709. DOI: 10.1016/S0921-5093(00)01576-8 |
0.433 |
|
| 2001 |
Venkateswarlu K, Murty BS, Chakraborty M. Effect of hot rolling and heat treatment of Al-5Ti-1B master alloy on the grain refining efficiency of aluminium Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 301: 180-186. DOI: 10.1016/S0921-5093(00)01422-2 |
0.525 |
|
| 2000 |
Datta MK, Pabi SK, Murty BS. Face-centered-cubic to hexagonal-close-packed transformation in nanocrystalline Ni(Si) by mechanical alloying Journal of Materials Research. 15: 1429-1432. DOI: 10.1557/Jmr.2000.0206 |
0.424 |
|
| 2000 |
Barua P, Srinivas V, Murty BS. Synthesis of quasicrystalline phase by mechanical alloying of Al70Cu20Fe10 Philosophical Magazine. 80: 1207-1217. DOI: 10.1080/01418610008212111 |
0.489 |
|
| 2000 |
Datta MK, Pabi SK, Murty BS. Phase fields of nickel silicides obtained by mechanical alloying in the nanocrystalline state Journal of Applied Physics. 87: 8393-8400. DOI: 10.1063/1.373553 |
0.47 |
|
| 2000 |
Murty BS, Ping DH, Hono K. Nanoquasicrystallization of binary Zr–Pd metallic glasses Applied Physics Letters. 77: 1102-1104. DOI: 10.1063/1.1289271 |
0.463 |
|
| 2000 |
Murty BS, Ping DH, Hono K, Inoue A. Influence of oxygen on the crystallization behavior of Zr65Cu27.5Al7.5 and Zr66.7Cu33.3 metallic glasses Acta Materialia. 48: 3985-3996. DOI: 10.1016/S1359-6454(00)00190-7 |
0.425 |
|
| 2000 |
Kori SA, Murty BS, Chakraborty M. Development of an efficient grain refiner for Al–7Si alloy and its modification with strontium Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 283: 94-104. DOI: 10.1016/S0921-5093(99)00794-7 |
0.529 |
|
| 2000 |
Kori SA, Murty BS, Chakraborty M. Development of an efficient grain refiner for Al–7Si alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 280: 58-61. DOI: 10.1016/S0921-5093(99)00656-5 |
0.528 |
|
| 2000 |
Srinivas V, Barua P, Murty BS. On icosahedral phase formation in mechanically alloyed Al70Cu20Fe10 Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 65-67. DOI: 10.1016/S0921-5093(00)01200-4 |
0.529 |
|
| 2000 |
Datta MK, Pabi SK, Murty BS. Thermal stability of nanocrystalline Ni silicides synthesized by mechanical alloying Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 284: 219-225. DOI: 10.1016/S0921-5093(00)00774-7 |
0.483 |
|
| 2000 |
Murty BS, Thakur SK, Dhindaw BK. On the infiltration behavior of Al, Al-Li, and Mg meltas through SiC p bed Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 31: 319-325. DOI: 10.1007/S11661-000-0076-4 |
0.43 |
|
| 1999 |
Kori SA, Murty BS, Chakraborty M. Influence of silicon and magnesium on grain refinement in aluminium alloys Materials Science and Technology. 15: 986-992. DOI: 10.1179/026708399101506823 |
0.507 |
|
| 1999 |
Murty BS, Kori SA, Venkateswarlu K, Bhat RR, Chakraborty M. Manufacture of Al–Ti–B master alloys by the reaction of complex halide salts with molten aluminium Journal of Materials Processing Technology. 89: 152-158. DOI: 10.1016/S0924-0136(99)00135-1 |
0.547 |
|
| 1999 |
Pabi SK, Manna I, Murty BS. Alloying behaviour in nanocrystalline materials during mechanical alloying Bulletin of Materials Science. 22: 321-327. DOI: 10.1007/Bf02749938 |
0.491 |
|
| 1998 |
Murty BS, Ranganathan S. Novel materials synthesis by mechanical alloying/milling International Materials Reviews. 43: 101-141. DOI: 10.1179/Imr.1998.43.3.101 |
0.514 |
|
| 1997 |
Pabi SK, Joardar J, Manna I, Murty BS. Nanocrystalline phases in CuNi, CuZn and NiAl systems by mechanical alloying Nanostructured Materials. 9: 149-152. DOI: 10.1016/S0965-9773(97)00040-8 |
0.503 |
|
| 1996 |
Rao AA, Murty BS, Chakraborty M. Response of an Al—Cr alloy towards grain refinement by Al—5Ti-1B master alloy International Journal of Cast Metals Research. 9: 125-132. DOI: 10.1080/13640461.1996.11819651 |
0.401 |
|
| 1996 |
Murty BS, Joardar J, Pabi SK. INFLUENCE OF Fe AND Cr ON THE DISORDERING BEHAVIOR OF MECHANICALLY ALLOYED NiAl Nanostructured Materials. 7: 691-697. DOI: 10.1016/0965-9773(96)00032-3 |
0.388 |
|
| 1996 |
Pabi SK, Murty BS. Mechanism of mechanical alloying in NiAl and CuZn systems Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 214: 146-152. DOI: 10.1016/0921-5093(96)10224-0 |
0.516 |
|
| 1996 |
Murty BS, Singh KHS, Pabi SK. Synthesis of nanocrystalline NiAl over a wide composition range by mechanical alloying Bulletin of Materials Science. 19: 565-571. DOI: 10.1007/Bf02744829 |
0.54 |
|
| 1996 |
Pabi SK, Murty BS. Synthesis of nanocrystalline alloys and intermetallics by mechanical alloying Bulletin of Materials Science. 19: 939-956. DOI: 10.1007/Bf02744629 |
0.557 |
|
| 1996 |
Pabi SK, Joardar J, Murty BS. Formation of nanocrystalline phases in the Cu-Zn system during mechanical alloying Journal of Materials Science. 31: 3207-3211. DOI: 10.1007/Bf00354670 |
0.474 |
|
| 1996 |
Murty BS, Joardar J, Pabi SK. Effect of non-stoichiometry on the ordering behaviour of nanocrystalline NiAl produced by mechanical alloying Journal of Materials Science Letters. 15: 2171-2172. DOI: 10.1007/Bf00241159 |
0.473 |
|
| 1995 |
Murty BS, Rao MM, Ranganathan S. Milling maps and amorphization during mechanical alloying Acta Metallurgica Et Materialia. 43: 2443-2450. DOI: 10.1016/0956-7151(94)00402-1 |
0.438 |
|
| 1995 |
Murty BS, Rao MM, Ranganathan S. Differences in the glass-forming ability of rapidly solidified and mechanically alloyed Ti-Ni-Cu alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 196: 237-241. DOI: 10.1016/0921-5093(94)09723-2 |
0.541 |
|
| 1993 |
Murty BS, Rao MM, Ranganathan S. Nanocrystalline phase formation and extension of solid solubility by mechanical alloying in Ti-based systems Nanostructured Materials. 3: 459-467. DOI: 10.1016/0965-9773(93)90113-P |
0.527 |
|
| 1993 |
Murty BS. Mechanical alloying—a novel synthesis route for amorphous phases Bulletin of Materials Science. 16: 1-17. DOI: 10.1007/Bf02745302 |
0.513 |
|
| 1993 |
Goyal A, Murty BS, Ranganathan S. Crystallization studies on amorphous AI-Y-Ni and AI-Y-Cu alloys Journal of Materials Science. 28: 6091-6095. DOI: 10.1007/Bf00365027 |
0.547 |
|
| 1992 |
Murty BS, Ranganathan S, Rao MM. Solid state amorphization in binary Ti-Ni, Ti-Cu and ternary Ti-Ni-Cu system by mechanical alloying Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 149: 231-240. DOI: 10.1016/0921-5093(92)90384-D |
0.534 |
|
| 1990 |
Murty BS, Rao MM, Ranganathan S. Synthesis of amorphous phase in Ti---Ni---Cu system by mechanical alloying Scripta Metallurgica Et Materialia. 24: 1819-1824. DOI: 10.1016/0956-716X(90)90552-R |
0.515 |
|
| Show low-probability matches. |