| Year |
Citation |
Score |
| 2018 |
Zhang T, Yue X, Sameoto D. Fluorosilicone as an Omnimold for Microreplication. Micromachines. 9. PMID 30424339 DOI: 10.3390/Mi9080406 |
0.367 |
|
| 2018 |
Khondoker MAH, Asad A, Sameoto D. Printing with mechanically interlocked extrudates using a custom bi-extruder for fused deposition modelling Rapid Prototyping Journal. 24: 921-934. DOI: 10.1108/Rpj-03-2017-0046 |
0.363 |
|
| 2017 |
Moghadas H, Zandvakili M, Sameoto D, Mousavi P. Beam-Reconfigurable Aperture Antenna by Stretching or Reshaping of a Flexible Surface Ieee Antennas and Wireless Propagation Letters. 16: 1337-1340. DOI: 10.1109/Lawp.2016.2633964 |
0.307 |
|
| 2017 |
Zandvakili M, Honari MM, Mousavi P, Sameoto D. Gecko‐Gaskets for Multilayer, Complex, and Stretchable Liquid Metal Microwave Circuits and Antennas Advanced Materials and Technologies. 2: 1700144. DOI: 10.1002/Admt.201700144 |
0.394 |
|
| 2016 |
Wang Y, Lehmann S, Shao J, Sameoto D. The adhesion circle: A new approach to better characterize directional gecko-inspired dry adhesives. Acs Applied Materials & Interfaces. PMID 28038311 DOI: 10.1021/Acsami.6B11708 |
0.342 |
|
| 2016 |
Wang Y, Tian H, Shao J, Sameoto D, Li X, Wang L, Hu H, Ding Y, Lu B. Switchable Dry Adhesion with Step-like Micropillars and Controllable Interfacial Contact. Acs Applied Materials & Interfaces. PMID 27040123 DOI: 10.1021/Acsami.6B01434 |
0.361 |
|
| 2016 |
Martinez-Quijada J, Caverhill-Godkewitsch S, Reynolds M, Sloan D, Backhouse CJ, Elliott DG, Sameoto D. Deterministic Design of Thin-Film Heaters for Precise Spatial Temperature Control in Lab-on-Chip Systems Journal of Microelectromechanical Systems. DOI: 10.1109/Jmems.2016.2536561 |
0.36 |
|
| 2016 |
Khondoker MAH, Sameoto D. Fabrication methods and applications of microstructured gallium based liquid metal alloys Smart Materials and Structures. 25: 93001. DOI: 10.1088/0964-1726/25/9/093001 |
0.311 |
|
| 2016 |
Warnat S, King H, Wasay A, Sameoto D, Hubbard T. Direct integration of MEMS, dielectric pumping and cell manipulation with reversibly bonded gecko adhesive microfluidics Journal of Micromechanics and Microengineering. 26: 097001. DOI: 10.1088/0960-1317/26/9/097001 |
0.392 |
|
| 2015 |
Wasay A, Sameoto D. Gecko gaskets for self-sealing and high-strength reversible bonding of microfluidics Lab On a Chip. 15: 2749-2753. PMID 26016928 DOI: 10.1039/C5Lc00342C |
0.401 |
|
| 2015 |
Sameoto D, Wasay A. Materials selection and manufacturing of thermoplastic elastomer microfluidics Proceedings of Spie. 9320: 932001. DOI: 10.1117/12.2081291 |
0.382 |
|
| 2015 |
Toossi A, Moghadas H, Shayegh M, Sameoto D, Daneshmand M. Efficient Microwave Susceptor Design for Localized Heating on Substrate Ieee Transactions On Components, Packaging and Manufacturing Technology. 5: 570-578. DOI: 10.1109/Tcpmt.2015.2409791 |
0.682 |
|
| 2015 |
Toossi A, Moghadas H, Daneshmand M, Sameoto D. Bonding PMMA microfluidics using commercial microwave ovens Journal of Micromechanics and Microengineering. 25: 085008. DOI: 10.1088/0960-1317/25/8/085008 |
0.687 |
|
| 2015 |
Martinez-Quijada J, Ma T, Hall GH, Reynolds M, Sloan D, Caverhill-Godkewitsch S, Glerum DM, Sameoto D, Elliott DG, Backhouse CJ. Robust thermal control for CMOS-based lab-on-chip systems Journal of Micromechanics and Microengineering. 25. DOI: 10.1088/0960-1317/25/7/075005 |
0.343 |
|
| 2014 |
Soltannia B, Sameoto D. Strong, reversible underwater adhesion via gecko-inspired hydrophobic fibers. Acs Applied Materials & Interfaces. 6: 21995-2003. PMID 25454841 DOI: 10.1021/Am5075375 |
0.311 |
|
| 2014 |
Bin Khaled W, Sameoto D. Fabrication and characterization of thermoplastic elastomer dry adhesives with high strength and low contamination. Acs Applied Materials & Interfaces. 6: 6806-15. PMID 24712514 DOI: 10.1021/Am500616A |
0.417 |
|
| 2014 |
Rezaeisaray M, El Gowini M, Sameoto D, Raboud D, Moussa W. Wide-bandwidth piezoelectric energy harvester with polymeric structure Journal of Micromechanics and Microengineering. 25: 015018. DOI: 10.1088/0960-1317/25/1/015018 |
0.328 |
|
| 2014 |
Sameoto D, Sharif H, Téllez JPD, Ferguson B, Menon C. Nonangled anisotropic elastomeric dry adhesives with tailorable normal adhesion strength and high directionality Journal of Adhesion Science and Technology. 28: 354-366. DOI: 10.1080/01694243.2012.693809 |
0.348 |
|
| 2014 |
Sameoto D, Ferguson B. Robust large-area synthetic dry adhesives Journal of Adhesion Science and Technology. 28: 337-353. DOI: 10.1080/01694243.2012.693802 |
0.384 |
|
| 2014 |
Zhang C, Zhou JHW, Sameoto D, Zhang X, Li Y, Ng HW, Menon C, Gates BD. Determining adhesion of nonuniform arrays of fibrils Journal of Adhesion Science and Technology. 28: 320-336. DOI: 10.1080/01694243.2012.691810 |
0.347 |
|
| 2013 |
Zhou M, Tian Y, Sameoto D, Zhang X, Meng Y, Wen S. Controllable interfacial adhesion applied to transfer light and fragile objects by using gecko inspired mushroom-shaped pillar surface. Acs Applied Materials & Interfaces. 5: 10137-44. PMID 24041007 DOI: 10.1021/Am402815X |
0.342 |
|
| 2013 |
Toossi A, Daneshmand M, Sameoto D. A low-cost rapid prototyping method for metal electrode fabrication using a CO2laser cutter Journal of Micromechanics and Microengineering. 23: 047001. DOI: 10.1088/0960-1317/23/4/047001 |
0.665 |
|
| 2013 |
Martinez-Quijada J, Caverhill-Godkewitsch S, Reynolds M, Gutierrez-Rivera L, Johnstone RW, Elliott DG, Sameoto D, Backhouse CJ. Fabrication and characterization of aluminum thin film heaters and temperature sensors on a photopolymer for lab-on-chip systems Sensors and Actuators, a: Physical. 193: 170-181. DOI: 10.1016/J.Sna.2013.01.035 |
0.369 |
|
| 2012 |
Gutierrez-Rivera L, Martinez-Quijada J, Johnstone R, Elliott D, Backhouse C, Sameoto D. Multilayer bonding using a conformal adsorbate film (CAF) for the fabrication of 3D monolithic microfluidic devices in photopolymer Journal of Micromechanics and Microengineering. 22: 85018. DOI: 10.1088/0960-1317/22/8/085018 |
0.43 |
|
| 2012 |
Sameoto D, Sharif H, Menon C. Investigation of low-pressure adhesion performance of mushroom shaped biomimetic dry adhesives Journal of Adhesion Science and Technology. 26: 2641-2652. DOI: 10.1080/01694243.2012.701463 |
0.304 |
|
| 2012 |
Johnstone RW, Sameoto D, Parameswaran M. Non-uniform residual stress assembly for free-space optical systems Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems. 18: 805-813. DOI: 10.1007/S00542-012-1490-4 |
0.304 |
|
| 2011 |
Krahn J, Sameoto D, Menon C. Controllable biomimetic adhesion using embedded phase change material Smart Materials and Structures. 20: 15014. DOI: 10.1088/0964-1726/20/1/015014 |
0.304 |
|
| 2010 |
Sameoto D, Menon C. Recent advances in the fabrication and adhesion testing of biomimetic dry adhesives Smart Materials and Structures. 19: 103001. DOI: 10.1088/0964-1726/19/10/103001 |
0.372 |
|
| 2010 |
Sameoto D, Menon C. Deep UV patterning of acrylic masters for molding biomimetic dry adhesives Journal of Micromechanics and Microengineering. 20: 115037. DOI: 10.1088/0960-1317/20/11/115037 |
0.344 |
|
| 2010 |
Rahbar M, Chhina S, Sameoto D, Parameswaran M. Microwave-induced, thermally assisted solvent bonding for low-cost PMMA microfluidic devices Journal of Micromechanics and Microengineering. 20: 15026. DOI: 10.1088/0960-1317/20/1/015026 |
0.431 |
|
| 2010 |
Li Y, Sameoto D, Menon C. Enhanced Compliant Adhesive Design and Fabrication with Dual-Level Hierarchical Structure Journal of Bionic Engineering. 7: 228-234. DOI: 10.1016/S1672-6529(10)60245-4 |
0.378 |
|
| 2010 |
Téllez JPD, Sameoto D, Menon C. Cleaning properties of dry adhesives Science China-Technological Sciences. 53: 2942-2946. DOI: 10.1007/S11431-010-4125-Y |
0.331 |
|
| 2009 |
Sameoto D, Menon C. Direct molding of dry adhesives with anisotropic peel strength using an offset lift-off photoresist mold Journal of Micromechanics and Microengineering. 19: 115026. DOI: 10.1088/0960-1317/19/11/115026 |
0.355 |
|
| 2009 |
Sameoto D, Menon C. A low-cost, high-yield fabrication method for producing optimized biomimetic dry adhesives Journal of Micromechanics and Microengineering. 19: 115002. DOI: 10.1088/0960-1317/19/11/115002 |
0.392 |
|
| 2008 |
Sameoto D, Li YS, Menon C. Micromask Generation for Polymer Morphology Control: Nanohair Fabrication for Synthetic Dry Adhesives Advances in Science and Technology. 54: 439-444. DOI: 10.4028/Www.Scientific.Net/Ast.54.439 |
0.371 |
|
| 2008 |
Johnstone RW, Ma AH, Sameoto D, Parameswaran M, Leung AM. Buckled cantilevers for out-of-plane platforms Journal of Micromechanics and Microengineering. 18: 45024. DOI: 10.1088/0960-1317/18/4/045024 |
0.309 |
|
| 2008 |
Haiducu M, Rahbar M, Foulds IG, Johnstone RW, Sameoto D, Parameswaran M. Deep-UV patterning of commercial grade PMMA for low-cost, large-scale microfluidics Journal of Micromechanics and Microengineering. 18: 115029. DOI: 10.1088/0960-1317/18/11/115029 |
0.32 |
|
| 2008 |
Sameoto D, Li Y, Menon C. Multi-Scale Compliant Foot Designs and Fabrication for Use with a Spider-Inspired Climbing Robot Journal of Bionic Engineering. 5: 189-196. DOI: 10.1016/S1672-6529(08)60024-4 |
0.373 |
|
| 2007 |
Tsang SH, Sameoto D, Foulds IG, Johnstone RW, Parameswaran M. Automated assembly of hingeless 90° out-of-plane microstructures Journal of Micromechanics and Microengineering. 17: 1314-1325. DOI: 10.1088/0960-1317/17/7/014 |
0.345 |
|
| 2007 |
Sameoto D, Tsang S, Parameswaran M. Polymer MEMS processing for multi-user applications Sensors and Actuators a-Physical. 134: 457-464. DOI: 10.1016/J.Sna.2006.05.018 |
0.358 |
|
| Show low-probability matches. |