Year |
Citation |
Score |
2021 |
Bhatti MRA, Bilotti E, Peijs T, Bastiaansen CWM. Photo-Actuation Stress of Ultra-Drawn, Chain-Extended Polyethylene Acs Applied Polymer Materials. 3: 2211-2217. DOI: 10.1021/ACSAPM.1C00268 |
0.674 |
|
2020 |
Bhatti MRA, Bilotti E, Zhang H, Varghese S, Verpaalen RCP, Schenning APHJ, Bastiaansen CWM, Peijs T. Ultra-High Actuation Stress Polymer Actuators as Light-Driven Artificial Muscles. Acs Applied Materials & Interfaces. PMID 32580542 DOI: 10.1021/Acsami.0C07684 |
0.757 |
|
2020 |
Eriksson M, Goossens H, Peijs T. Influence of the Solidification Process on the Mechanical Properties of Solid-State Drawn PCL/Sepiolite Nanocomposite Tapes Fibers. 8: 70. DOI: 10.3390/fib8110070 |
0.301 |
|
2020 |
Eriksson M, Meuwissen M, Peijs T, Goossens H. The Influence of Melt-Mixing Conditions and State of Dispersion on Crystallisation, Rheology and Mechanical Properties of PCL/Sepiolite Nanocomposites International Polymer Processing. 35: 302-313. DOI: 10.3139/217.3890 |
0.351 |
|
2020 |
Lin Y, Cao J, Zhu M, Bilotti E, Zhang H, Bastiaansen CWM, Peijs T. High-Performance Transparent Laminates Based on Highly Oriented Polyethylene Films Acs Applied Polymer Materials. 2: 2458-2468. DOI: 10.1021/acsapm.0c00404 |
0.701 |
|
2020 |
Bhatti MRA, Bilotti E, Zhang H, Bastiaansen CWM, Peijs T. Photo-thermal actuation of ultra-drawn high-density polyethylene Polymer. 207: 122897. DOI: 10.1016/J.Polymer.2020.122897 |
0.738 |
|
2020 |
Tao Y, Stevens CA, Bilotti E, Peijs T, Busfield JJC. Fatigue of carbon cord-rubber composites: Effect of frequency, R ratio and life prediction using constant life models International Journal of Fatigue. 135: 105558. DOI: 10.1016/J.Ijfatigue.2020.105558 |
0.71 |
|
2020 |
Liu Y, Vliet Tv, Tao Y, Busfield JJC, Peijs T, Bilotti E, Zhang H. Sustainable and self-regulating out-of-oven manufacturing of FRPs with integrated multifunctional capabilities Composites Science and Technology. 190: 108032. DOI: 10.1016/J.Compscitech.2020.108032 |
0.765 |
|
2020 |
Liu Y, Asare E, Porwal H, Barbieri E, Goutianos S, Evans J, Newton M, Busfield JJC, Peijs T, Zhang H, Bilotti E. The Effect of Conductive Network on Positive Temperature Coefficient Behaviour in Conductive Polymer Composites Composites Part a-Applied Science and Manufacturing. 106074. DOI: 10.1016/J.Compositesa.2020.106074 |
0.797 |
|
2020 |
Goutianos S, Cabrera NO, Alcock B, Reynolds N, Peijs T. Self-Reinforced Polypropylene Composites based on Discontinuous Tapes - An Experimental and Numerical Study of the Influence of Tape Length Applied Composite Materials. 27: 767-793. DOI: 10.1007/s10443-020-09838-y |
0.351 |
|
2020 |
Lin Y, Bilotti E, Bastiaansen CWM, Peijs T. Transparent semi-crystalline polymeric materials and their nanocomposites: a review Polymer Engineering and Science. DOI: 10.1002/Pen.25489 |
0.72 |
|
2020 |
Li Y, Feng Z, Hao L, Huang L, Xin C, Wang Y, Bilotti E, Essa K, Zhang H, Li Z, Yan F, Peijs T. A Review on Functionally Graded Materials and Structures via Additive Manufacturing: From Multi‐Scale Design to Versatile Functional Properties Advanced Materials and Technologies. 5: 1900981. DOI: 10.1002/Admt.201900981 |
0.728 |
|
2019 |
Kang Y, Wang C, Qiao Y, Gu J, Zhang H, Peijs T, Kong J, Zhang G, Shi X. Tissue-Engineered Trachea Consisting of Electrospun Patterned sc-PLA/GO-g-IL Fibrous Membranes with Antibacterial Property and 3D-Printed Skeletons with Elasticity. Biomacromolecules. PMID 30844253 DOI: 10.1021/Acs.Biomac.9B00160 |
0.444 |
|
2019 |
Rogalski JJ, Zhang H, Yao J, Bastiaansen CWM, Peijs T. High-modulus rotary jet spun co-polyimide nanofibers and their composites Nanocomposites. 6: 1-11. DOI: 10.1080/20550324.2019.1687174 |
0.303 |
|
2019 |
van Erp TB, Reynolds CT, Bilotti E, Peijs T. Nanoclay assisted ultra-drawing of polypropylene tapes Nanocomposites. 5: 114-123. DOI: 10.1080/20550324.2019.1671038 |
0.696 |
|
2019 |
Lin Y, Patel R, Cao J, Tu W, Zhang H, Bilotti E, Bastiaansen CWM, Peijs T. Glass-like transparent high strength polyethylene films by tuning drawing temperature Polymer. 171: 180-191. DOI: 10.1016/J.Polymer.2019.03.036 |
0.77 |
|
2019 |
Kernin A, Wan K, Liu Y, Shi X, Kong J, Bilotti E, Peijs T, Zhang H. The effect of graphene network formation on the electrical, mechanical, and multifunctional properties of graphene/epoxy nanocomposites Composites Science and Technology. 169: 224-231. DOI: 10.1016/J.Compscitech.2018.10.036 |
0.79 |
|
2019 |
Li Y, Feng Z, Huang L, Essa K, Bilotti E, Zhang H, Peijs T, Hao L. Additive manufacturing high performance graphene-based composites: a review Composites Part a-Applied Science and Manufacturing. 124: 105483. DOI: 10.1016/J.Compositesa.2019.105483 |
0.774 |
|
2019 |
Liu Y, Zhang H, Porwal H, Busfield JJ, Peijs T, Bilotti E. Pyroresistivity in conductive polymer composites: a perspective on recent advances and new applications Polymer International. 68: 299-305. DOI: 10.1002/Pi.5735 |
0.788 |
|
2019 |
Lin Y, Tu W, Verpaalen RCP, Zhang H, Bastiaansen CWM, Peijs T. Transparent, Lightweight, and High Strength Polyethylene Films by a Scalable Continuous Extrusion and Solid‐State Drawing Process Macromolecular Materials and Engineering. 304: 1900138. DOI: 10.1002/Mame.201900138 |
0.426 |
|
2018 |
Zhang X, Geven MA, Wang X, Qin L, Grijpma DW, Peijs T, Eglin D, Guillaume O, Gautrot JE. A drug eluting poly(trimethylene carbonate)/poly(lactic acid)-reinforced nanocomposite for the functional delivery of osteogenic molecules. International Journal of Nanomedicine. 13: 5701-5718. PMID 30288042 DOI: 10.2147/Ijn.S163219 |
0.345 |
|
2018 |
Santagiuliana G, Picot OT, Crespo-Ribadeneyra M, Porwal H, Zhang H, Li Y, Rubini L, Colonna S, Fina A, Barbieri E, Spoelstra AB, Mirabello G, Patterson JP, Botto L, Pugno NM, ... Peijs T, et al. Breaking the Nanoparticle Loading/Dispersion Dichotomy in Polymer Nanocomposites with the Art of Croissant-Making. Acs Nano. PMID 30179514 DOI: 10.1021/Acsnano.8B02877 |
0.789 |
|
2018 |
Rogalski JJ, Bastiaansen CWM, Peijs T. PA6 nanofibre production: A comparison between rotary jet spinning and electrospinning Fibers. 6: 37. DOI: 10.3390/Fib6020037 |
0.362 |
|
2018 |
Zhang H, Liu Y, Huang M, Bilotti E, Peijs T. Dissolvable thermoplastic interleaves for carbon nanotube localization in carbon/epoxy laminates with integrated damage sensing capabilities Structural Health Monitoring-An International Journal. 17: 59-66. DOI: 10.1177/1475921716683653 |
0.783 |
|
2018 |
Liu Y, Zhang H, Porwal H, Tu W, Wan K, Evans J, Newton M, Busfield JJC, Peijs T, Bilotti E. Tailored pyroresistive performance and flexibility by introducing a secondary thermoplastic elastomeric phase into graphene nanoplatelet (GNP) filled polymer composites for self-regulating heating devices Journal of Materials Chemistry C. 6: 2760-2768. DOI: 10.1039/C7Tc05621D |
0.792 |
|
2018 |
Tao Y, Windslow R, Stevens CA, Bilotti E, Peijs T, Busfield JJC. Development of a novel fatigue test method for cord-rubber composites Polymer Testing. 71: 238-247. DOI: 10.1016/J.Polymertesting.2018.09.001 |
0.742 |
|
2018 |
Tao Y, Liu Y, Zhang H, Stevens CA, Bilotti E, Peijs T, Busfield JJC. Smart cord-rubber composites with integrated sensing capabilities by localised carbon nanotubes using a simple swelling and infusion method Composites Science and Technology. 167: 24-31. DOI: 10.1016/J.Compscitech.2018.07.023 |
0.789 |
|
2018 |
Li Y, Zhang H, Liu Y, Wang H, Huang Z, Peijs T, Bilotti E. Synergistic effects of spray-coated hybrid carbon nanoparticles for enhanced electrical and thermal surface conductivity of CFRP laminates Composites Part a-Applied Science and Manufacturing. 105: 9-18. DOI: 10.1016/J.Compositesa.2017.10.032 |
0.791 |
|
2018 |
Zhang JM, Mousavi Z, Soykeabkaew N, Peijs T. Effects of surface‐dissolution process multivariables on the morphology, mechanical properties, and crystallization of all‐aramid composites Polymer Composites. 39: 3307-3316. DOI: 10.1002/Pc.24347 |
0.389 |
|
2018 |
Zhang JM, Cortés-Ballesteros B, Peijs T. All‐aramid composites by partial fiber dissolution in mixed solvents Polymer Composites. 39: 3013-3021. DOI: 10.1002/Pc.24302 |
0.408 |
|
2018 |
Gao Y, Picot OT, Tu W, Bilotti E, Peijs T. Multilayer coextrusion of graphene polymer nanocomposites with enhanced structural organization and properties Journal of Applied Polymer Science. 135: 46041. DOI: 10.1002/App.46041 |
0.751 |
|
2017 |
Picot OT, Rocha VG, Ferraro C, Ni N, D'Elia E, Meille S, Chevalier J, Saunders T, Peijs T, Reece MJ, Saiz E. Using graphene networks to build bioinspired self-monitoring ceramics. Nature Communications. 8: 14425. PMID 28181518 DOI: 10.1038/Ncomms14425 |
0.44 |
|
2017 |
Li Y, Zhang H, Huang Z, Bilotti E, Peijs T. Graphite Nanoplatelet Modified Epoxy Resin for Carbon Fibre Reinforced Plastics with Enhanced Properties Journal of Nanomaterials. 2017: 1-10. DOI: 10.1155/2017/5194872 |
0.825 |
|
2017 |
Zhang JM, Hua Q, Reynolds CT, Zhao Y, Dai Z, Bilotti E, Tang J, Peijs T. Preparation of High Modulus Poly(Ethylene Terephthalate): Influence of Molecular Weight, Extrusion, and Drawing Parameters International Journal of Polymer Science. 2017: 1-10. DOI: 10.1155/2017/2781425 |
0.74 |
|
2017 |
Gao Y, Picot OT, Zhang H, Bilotti E, Peijs T. Synergistic effects of filler size on thermal annealing-induced percolation in polylactic acid (PLA)/graphite nanoplatelet (GNP) nanocomposites Nanocomposites. 3: 67-75. DOI: 10.1080/20550324.2017.1333780 |
0.72 |
|
2017 |
Patel HK, Balasubramanian V, Peijs T. The fracture toughness of natural fibre- and glass fibre-reinforced SMC Plastics Rubber and Composites. 46: 355-364. DOI: 10.1080/14658011.2017.1357868 |
0.359 |
|
2017 |
Hughes-Brittain NF, Qiu L, Picot OT, Wang W, Peijs T, Bastiaansen CW. Surface texturing of electrospun fibres by photoembossing using pulsed laser interference holography and its effects on endothelial cell adhesion Polymer. 125: 40-49. DOI: 10.1016/J.Polymer.2017.07.065 |
0.309 |
|
2017 |
Zhang X, Geven MA, Grijpma DW, Peijs T, Gautrot JE. Tunable and processable shape memory composites based on degradable polymers Polymer. 122: 323-331. DOI: 10.1016/J.Polymer.2017.06.066 |
0.395 |
|
2017 |
Mao R, Goutianos S, Tu W, Meng N, Chen S, Peijs T. Modelling the elastic properties of cellulose nanopaper Materials & Design. 126: 183-189. DOI: 10.1016/J.Matdes.2017.04.050 |
0.315 |
|
2017 |
Goutianos S, Mao R, Peijs T. Effect of inter-fibre bonding on the fracture of fibrous networks with strong interactions International Journal of Solids and Structures. 271-278. DOI: 10.1016/J.Ijsolstr.2017.12.020 |
0.366 |
|
2017 |
Gao Y, Picot OT, Bilotti E, Peijs T. Influence of filler size on the properties of poly(lactic acid) (PLA)/graphene nanoplatelet (GNP) nanocomposites European Polymer Journal. 86: 117-131. DOI: 10.1016/J.Eurpolymj.2016.10.045 |
0.752 |
|
2017 |
Zhang H, Liu Y, Huo S, Briscoe J, Tu W, Picot OT, Rezai A, Bilotti E, Peijs T. Filtration effects of graphene nanoplatelets in resin infusion processes: Problems and possible solutions Composites Science and Technology. 139: 138-145. DOI: 10.1016/J.Compscitech.2016.12.020 |
0.779 |
|
2017 |
Wong DWY, Zhang H, Bilotti E, Peijs T. Interlaminar toughening of woven fabric carbon/epoxy composite laminates using hybrid aramid/phenoxy interleaves Composites Part a-Applied Science and Manufacturing. 101: 151-159. DOI: 10.1016/J.Compositesa.2017.06.001 |
0.808 |
|
2017 |
Li Y, Zhang H, Porwal H, Huang Z, Bilotti E, Peijs T. Mechanical, electrical and thermal properties of in-situ exfoliated graphene/epoxy nanocomposites Composites Part a-Applied Science and Manufacturing. 95: 229-236. DOI: 10.1016/J.Compositesa.2017.01.007 |
0.809 |
|
2017 |
Mao R, Goutianos S, Tu W, Meng N, Yang Gy, Berglund LA, Peijs T. Comparison of fracture properties of cellulose nanopaper, printing paper and buckypaper Journal of Materials Science. 52: 9508-9519. DOI: 10.1007/S10853-017-1108-4 |
0.35 |
|
2017 |
Mao R, Meng N, Tu W, Peijs T. Toughening mechanisms in cellulose nanopaper: the contribution of amorphous regions Cellulose. 24: 4627-4639. DOI: 10.1007/S10570-017-1453-0 |
0.315 |
|
2017 |
Liu Y, Zhang H, Porwal H, Tu W, Evans J, Newton M, Busfield JJC, Peijs T, Bilotti E. Universal Control on Pyroresistive Behavior of Flexible Self‐Regulating Heating Devices Advanced Functional Materials. 27: 1702253. DOI: 10.1002/Adfm.201702253 |
0.767 |
|
2016 |
Hughes-Brittain NF, Qiu L, Wang W, Peijs T, Bastiaansen CW. Degradation and biocompatibility of photoembossed PLGA-acrylate blend for improved cell adhesion. Journal of Biomedical Materials Research. Part B, Applied Biomaterials. PMID 27910198 DOI: 10.1002/Jbm.B.33789 |
0.335 |
|
2016 |
Li Y, Zhang H, Crespo-Ribadeneyra M, Porwal H, Picot OT, Santagiuliana G, Huang Z, Barbieri E, Pugno NM, Peijs T, Bilotti E. In-Situ Exfoliation of Graphene in Epoxy Resins: a Facile Strategy to Efficient and Large Scale Graphene Nanocomposites. Acs Applied Materials & Interfaces. PMID 27541488 DOI: 10.1021/Acsami.6B07492 |
0.8 |
|
2016 |
Li Y, Zhang H, Peijs T, Bilotti E. Graphene Delivery Systems for Hierarchical Fiber Reinforced Composites Mrs Advances. 1: 1339-1344. DOI: 10.1557/Adv.2016.92 |
0.797 |
|
2016 |
Li Y, Zhang H, Bilotti E, Peijs T. Optimization of Three-Roll Mill Parameters for In-Situ Exfoliation of Graphene Mrs Advances. 1: 1389-1394. DOI: 10.1557/Adv.2016.191 |
0.793 |
|
2016 |
Li Y, Porwal H, Huang Z, Zhang H, Bilotti E, Peijs T. Enhanced Thermal and Electrical Properties of Polystyrene-Graphene Nanofibers via Electrospinning Journal of Nanomaterials. 2016: 18. DOI: 10.1155/2016/4624976 |
0.796 |
|
2016 |
Asare E, Basir A, Tu W, Porwal H, Zhang H, Liu Y, Evans J, Newton M, Peijs T, Bilotti E. Effect of mixed fillers on positive temperature coefficient of conductive polymer composites Nanocomposites. 2: 58-64. DOI: 10.1080/20550324.2016.1192796 |
0.754 |
|
2016 |
Somord K, Suwantong O, Tawichai N, Peijs T, Soykeabkaew N. Self-reinforced poly(lactic acid) nanocomposites of high toughness Polymer. 103: 347-352. DOI: 10.1016/J.Polymer.2016.09.080 |
0.428 |
|
2016 |
Zhang X, Geven MA, Grijpma DW, Gautrot JE, Peijs T. Polymer-polymer composites for the design of strong and tough degradable biomaterials Materials Today Communications. 8: 53-63. DOI: 10.1016/J.Mtcomm.2016.05.001 |
0.504 |
|
2016 |
Asare E, Evans J, Newton M, Peijs T, Bilotti E. Effect of particle size and shape on positive temperature coefficient (PTC) of conductive polymer composites (CPC) - a model study Materials and Design. 97: 459-463. DOI: 10.1016/J.Matdes.2016.02.077 |
0.765 |
|
2016 |
Yao J, Picot OT, Hughes-Brittain NF, Bastiaansen CWM, Peijs T. Electrospinning of reactive mesogens European Polymer Journal. 84: 642-651. DOI: 10.1016/J.Eurpolymj.2016.08.037 |
0.425 |
|
2016 |
Arévalo R, Peijs T. Binderless all-cellulose fibreboard from microfibrillated lignocellulosic natural fibres Composites Part a-Applied Science and Manufacturing. 83: 38-46. DOI: 10.1016/J.Compositesa.2015.11.027 |
0.404 |
|
2016 |
Schaller R, Peijs T, Tervoort TA. High-performance liquid-crystalline polymer films for monolithic “composites” Composites Part a-Applied Science and Manufacturing. 81: 296-304. DOI: 10.1016/J.Compositesa.2015.11.024 |
0.445 |
|
2015 |
Mai F, Tu W, Bilotti E, Peijs T. The Influence of Solid-State Drawing on Mechanical Properties and Hydrolytic Degradation of Melt-Spun Poly(Lactic Acid) (PLA) Tapes Fibers. 3: 523-538. DOI: 10.3390/Fib3040523 |
0.745 |
|
2015 |
Sellam C, Zhai Z, Zahabi H, Picot OT, Deng H, Fu Q, Bilotti E, Peijs T. High mechanical reinforcing efficiency of layered poly(vinyl alcohol) – graphene oxide nanocomposites Nanocomposites. 1: 89-95. DOI: 10.1179/2055033215Y.0000000001 |
0.71 |
|
2015 |
Patel H, Ren G, Hogg PJ, Peijs T. Hemp fibre as alternative to glass fibre in sheet moulding compound. Part 2 : impact properties Plastics Rubber and Composites. 44: 291-298. DOI: 10.1179/1743289815Y.0000000030 |
0.408 |
|
2015 |
Zhang H, Liu Y, Bilotti E, Peijs T. In-Situ Monitoring of Interlaminar Shear Damage in Carbon Fibre Composites Advanced Composites Letters. 24: 96369351502400. DOI: 10.1177/096369351502400405 |
0.793 |
|
2015 |
Zhang H, Kuwata M, Bilotti E, Peijs T. Integrated damage sensing in fibre-reinforced composites with extremely low carbon nanotube loadings Journal of Nanomaterials. 2015. DOI: 10.1155/2015/785834 |
0.805 |
|
2015 |
Zhang H, Bilotti E, Peijs T. The use of carbon nanotubes for damage sensing and structural health monitoring in laminated composites: a review Nanocomposites. 1: 167-184. DOI: 10.1080/20550324.2015.1113639 |
0.737 |
|
2015 |
Yao J, Li G, Bastiaansen CWM, Peijs T. High performance co-polyimide nanofiber reinforced composites Polymer (United Kingdom). 76: 46-51. DOI: 10.1016/j.polymer.2015.08.054 |
0.314 |
|
2015 |
Zhang H, Bilotti E, Tu W, Lew CY, Peijs T. Static and dynamic percolation of phenoxy/carbon nanotube nanocomposites European Polymer Journal. 68: 128-138. DOI: 10.1016/J.Eurpolymj.2015.04.022 |
0.806 |
|
2015 |
Zhang H, Bharti A, Li Z, Du S, Bilotti E, Peijs T. Localized toughening of carbon/epoxy laminates using dissolvable thermoplastic interleaves and electrospun fibres Composites Part a: Applied Science and Manufacturing. 79: 116-126. DOI: 10.1016/J.Compositesa.2015.09.024 |
0.781 |
|
2015 |
Mai F, Tu W, Bilotti E, Peijs T. Preparation and properties of self-reinforced poly(lactic acid) composites based on oriented tapes Composites Part a: Applied Science and Manufacturing. 76: 145-153. DOI: 10.1016/J.Compositesa.2015.05.030 |
0.791 |
|
2015 |
Zhang H, Liu Y, Kuwata M, Bilotti E, Peijs T. Improved fracture toughness and integrated damage sensing capability by spray coated CNTs on carbon fibre prepreg Composites Part a: Applied Science and Manufacturing. 70: 102-110. DOI: 10.1016/J.Compositesa.2014.11.029 |
0.8 |
|
2015 |
Mai F, Deng H, Tu W, Chankajorn S, Fu Q, Bilotti E, Peijs T. Oriented Poly(lactic acid)/Carbon Nanotube Composite Tapes with High Electrical Conductivity and Mechanical Properties Macromolecular Materials and Engineering. 300: 1257-1267. DOI: 10.1002/Mame.201500163 |
0.804 |
|
2014 |
Hughes-Brittain NF, Qiu L, Wang W, Peijs T, Bastiaansen CW. Photoembossing of surface relief structures in polymer films for biomedical applications. Journal of Biomedical Materials Research. Part B, Applied Biomaterials. 102: 214-20. PMID 23908051 DOI: 10.1002/Jbm.B.32997 |
0.351 |
|
2014 |
Yao J, Bastiaansen CWM, Peijs T. High Strength and High Modulus Electrospun Nanofibers Fibers. 2: 158-186. DOI: 10.3390/Fib2020158 |
0.361 |
|
2014 |
Nuzzo A, Bilotti E, Peijs T, Acierno D, Filippone G. Nanoparticle-induced co-continuity in immiscible polymer blends - A comparative study on bio-based PLA-PA11 blends filled with organoclay, sepiolite, and carbon nanotubes Polymer (United Kingdom). 55: 4908-4919. DOI: 10.1016/J.Polymer.2014.07.036 |
0.769 |
|
2014 |
Bilotti E, Duquesne E, Deng H, Zhang R, Quero F, Georgiades SN, Fischer HR, Dubois P, Peijs T. In situ polymerised polyamide 6/sepiolite nanocomposites: Effect of different interphases European Polymer Journal. 56: 131-139. DOI: 10.1016/J.Eurpolymj.2014.04.004 |
0.78 |
|
2014 |
Inam F, Heaton A, Brown P, Peijs T, Reece MJ. Effects of dispersion surfactants on the properties of ceramic-carbon nanotube (CNT) nanocomposites Ceramics International. 40: 511-516. DOI: 10.1016/J.Ceramint.2013.06.031 |
0.401 |
|
2014 |
Goutianos S, Arévalo R, Sørensen BF, Peijs T. Effect of Processing Conditions on Fracture Resistance and Cohesive Laws of Binderfree All-Cellulose Composites Applied Composite Materials. 21: 805-825. DOI: 10.1007/S10443-013-9381-0 |
0.335 |
|
2014 |
Luijsterburg B, Jobse P, Merino DH, Peijs T, Goossens H. Solid‐state drawing of β‐nucleated polypropylene: Effect of additives on drawability and mechanical properties Journal of Polymer Science Part B. 52: 1071-1082. DOI: 10.1002/Polb.23533 |
0.337 |
|
2014 |
Russo P, Cammarano S, Bilotti E, Peijs T, Cerruti P, Acierno D. Physical properties of poly lactic acid/clay nanocomposite films: Effect of filler content and annealing treatment Journal of Applied Polymer Science. 131. DOI: 10.1002/App.39798 |
0.742 |
|
2013 |
Picot OT, Dai M, Broer DJ, Peijs T, Bastiaansen CW. New approach toward reflective films and fibers using cholesteric liquid-crystal coatings. Acs Applied Materials & Interfaces. 5: 7117-21. PMID 23802918 DOI: 10.1021/Am401438Z |
0.326 |
|
2013 |
Nainggolan H, Gea S, Bilotti E, Peijs T, Hutagalung SD. Mechanical and thermal properties of bacterial-cellulose-fibre-reinforced Mater-Bi(®) bionanocomposite. Beilstein Journal of Nanotechnology. 4: 325-9. PMID 23766957 DOI: 10.3762/Bjnano.4.37 |
0.772 |
|
2013 |
Mai F, Habibi Y, Raquez JM, Dubois P, Feller JF, Peijs T, Bilotti E. Poly(lactic acid)/carbon nanotube nanocomposites with integrated degradation sensing Polymer (United Kingdom). 54: 6818-6823. DOI: 10.1016/J.Polymer.2013.10.035 |
0.785 |
|
2013 |
Bilotti E, Zhang H, Deng H, Zhang R, Fu Q, Peijs T. Controlling the dynamic percolation of carbon nanotube based conductive polymer composites by addition of secondary nanofillers: The effect on electrical conductivity and tuneable sensing behaviour Composites Science and Technology. 74: 85-90. DOI: 10.1016/J.Compscitech.2012.10.008 |
0.814 |
|
2013 |
Zhang R, Deng H, Valenca R, Jin J, Fu Q, Bilotti E, Peijs T. Strain sensing behaviour of elastomeric composite films containing carbon nanotubes under cyclic loading Composites Science and Technology. 74: 1-5. DOI: 10.1016/J.Compscitech.2012.09.016 |
0.763 |
|
2013 |
Lin L, Deng H, Gao X, Zhang S, Bilotti E, Peijs T, Fu Q. Modified resistivity-strain behavior through the incorporation of metallic particles in conductive polymer composite fibers containing carbon nanotubes Polymer International. 62: 134-140. DOI: 10.1002/Pi.4291 |
0.757 |
|
2013 |
Hapuarachchi TD, Peijs T, Bilotti E. Thermal degradation and flammability behavior of polypropylene/clay/carbon nanotube composite systems Polymers For Advanced Technologies. 24: 331-338. DOI: 10.1002/Pat.3087 |
0.769 |
|
2013 |
Borreguero AM, Rodríguez JF, Valverde JL, Peijs T, Carmona M. Characterization of rigid polyurethane foams containing microencapsulted phase change materials: Microcapsules type effect Journal of Applied Polymer Science. 128: 582-590. DOI: 10.1002/App.38226 |
0.376 |
|
2012 |
Stachewicz U, Modaresifar F, Bailey RJ, Peijs T, Barber AH. Manufacture of void-free electrospun polymer nanofiber composites with optimized mechanical properties. Acs Applied Materials & Interfaces. 4: 2577-82. PMID 22524442 DOI: 10.1021/Am300235R |
0.456 |
|
2012 |
Zhang SM, Lin L, Deng H, Gao X, Bilotti E, Peijs T, Zhang Q, Fu Q. Synergistic effect in conductive networks constructed with carbon nanofillers in different dimensions Express Polymer Letters. 6: 159-168. DOI: 10.3144/Expresspolymlett.2012.17 |
0.775 |
|
2012 |
Picot OT, Dai M, Peijs T, Bastiaansen CWM. Manufacturing of Fibres with New Reflective Properties and their Application in Textiles Mrs Proceedings. 1403. DOI: 10.1557/Opl.2012.368 |
0.368 |
|
2012 |
Inam F, Reece MJ, Peijs T. Shortened carbon nanotubes and their influence on the electrical properties of polymer nanocomposites Journal of Composite Materials. 46: 1313-1322. DOI: 10.1177/0021998311418139 |
0.458 |
|
2012 |
Dai M, De Jong TM, Sánchez C, Picot OT, Broer DJ, Peijs T, Bastiaansen CWM. Surface structuring of bi-component fibres with photoembossing Rsc Advances. 2: 9964-9968. DOI: 10.1039/C2Ra21880A |
0.316 |
|
2012 |
Stachewicz U, Modaresifar F, Bailey RJ, Peijs T, Barber AH. Manufacture of void-free electrospun polymer nanofiber composites with optimized mechanical properties Acs Applied Materials and Interfaces. 4: 2577-2582. DOI: 10.1021/am300235r |
0.351 |
|
2012 |
Zhang R, Deng H, Valenca R, Jin J, Fu Q, Bilotti E, Peijs T. Carbon nanotube polymer coatings for textile yarns with good strain sensing capability Sensors and Actuators, a: Physical. 179: 83-91. DOI: 10.1016/J.Sna.2012.03.029 |
0.763 |
|
2012 |
Milsom B, Viola G, Gao Z, Inam F, Peijs T, Reece MJ. The effect of carbon nanotubes on the sintering behaviour of zirconia Journal of the European Ceramic Society. 32: 4149-4156. DOI: 10.1016/J.Jeurceramsoc.2012.07.028 |
0.324 |
|
2011 |
Gea S, Reynolds CT, Roohpour N, Wirjosentono B, Soykeabkaew N, Bilotti E, Peijs T. Investigation into the structural, morphological, mechanical and thermal behaviour of bacterial cellulose after a two-step purification process. Bioresource Technology. 102: 9105-10. PMID 21835613 DOI: 10.1016/J.Biortech.2011.04.077 |
0.748 |
|
2011 |
Sellam C, Zhai Z, Zahabi H, Deng H, Bilotti E, Peijs T. Bioinspired layer-by-layer Poly(vinyl alcohol) - Graphene oxide nanocomposites Materials Research Society Symposium Proceedings. 1410: 19-24. DOI: 10.1557/Opl.2012.544 |
0.746 |
|
2011 |
Deng H, Fu Q, Bilotti E, Peijs T. The use of polymer-carbon nanotube composites in fibres Polymer-Carbon Nanotube Composites: Preparation, Properties and Applications. 657-675. DOI: 10.1533/9780857091390.3.657 |
0.782 |
|
2011 |
Dai M, Picot OT, Hughes-Brittain NF, Peijs T, Bastiaansen CWM. Formation of relief structures on fibres by photo-embossing Journal of Materials Chemistry. 21: 15527-15531. DOI: 10.1039/C1Jm12365C |
0.335 |
|
2011 |
Inam F, Peijs T, Reece MJ. The production of advanced fine-grained alumina by carbon nanotube addition Journal of the European Ceramic Society. 31: 2853-2859. DOI: 10.1016/J.Jeurceramsoc.2011.07.011 |
0.396 |
|
2011 |
Borreguero AM, Rodríguez JF, Valverde JL, Arevalo R, Peijs T, Carmona M. Characterization of rigid polyurethane foams containing microencapsulated Rubitherm RT27: catalyst effect. Part II Journal of Materials Science. 46: 347-356. DOI: 10.1007/S10853-010-4824-6 |
0.364 |
|
2011 |
Hapuarachchi TD, Bilotti E, Reynolds CT, Peijs T. The synergistic performance of multiwalled carbon nanotubes and sepiolite nanoclays as flame retardants for unsaturated polyester Fire and Materials. 35: 157-169. DOI: 10.1002/Fam.1044 |
0.751 |
|
2011 |
Deng H, Bilotti E, Zhang R, Wang K, Zhang Q, Peijs T, Fu Q. Improving tensile strength and toughness of melt processed polyamide 6/multiwalled carbon nanotube composites by in situ polymerization and filler surface functionalization Journal of Applied Polymer Science. 120: 133-140. DOI: 10.1002/App.33140 |
0.805 |
|
2010 |
Zhang JM, Mousavi Z, Soykeabkaew N, Smith P, Nishino T, Peijs T. All-aramid composites by partial fiber dissolution. Acs Applied Materials & Interfaces. 2: 919-26. PMID 20356299 DOI: 10.1021/Am900859C |
0.472 |
|
2010 |
Hudziak S, Darfeuille A, Zhang R, Peijs T, Mountjoy G, Bertoni G, Baxendale M. Magnetoresistive phenomena in an Fe-filled carbon nanotube/elastomer composite. Nanotechnology. 21: 125505. PMID 20203351 DOI: 10.1088/0957-4484/21/12/125505 |
0.375 |
|
2010 |
Wang W, Peijs T, Barber AH. Indentation induced solid state ordering of electrospun polyethylene oxide fibres. Nanotechnology. 21: 035705. PMID 19966404 DOI: 10.1088/0957-4484/21/3/035705 |
0.404 |
|
2010 |
Berglund LA, Peijs T. Cellulose Biocomposites—From Bulk Moldings to Nanostructured Systems Mrs Bulletin. 35: 201-207. DOI: 10.1557/Mrs2010.652 |
0.438 |
|
2010 |
Ciselli P, Lu L, Busfield JJC, Peijs T. Piezoresistive polymer composites based on EPDM and MWNTs for strain sensing applications E-Polymers. 10: 125-137. DOI: 10.1515/Epoly.2010.10.1.125 |
0.443 |
|
2010 |
Inam F, Yan H, Reece MJ, Peijs T. Structural and chemical stability of multiwall carbon nanotubes in sintered ceramic nanocomposite Advances in Applied Ceramics. 109: 240-245. DOI: 10.1179/174367509X12595778633336 |
0.419 |
|
2010 |
Patel HK, Ren G, Hogg PJ, Peijs T. Hemp fibre as alternative to glass fibre in sheet moulding compound Part 1 - Influence of fibre content and surface treatment on mechanical properties Plastics, Rubber and Composites. 39: 268-276. DOI: 10.1179/174328910X12647080902853 |
0.427 |
|
2010 |
Wang Z, Bilotti E, Peijs T. Effective Modulus of Single- and Multi-Walled Carbon Nanotubes in Melt-Compounded Polycarbonate Nanocomposites Advanced Composites Letters. 19: 96369351001900. DOI: 10.1177/096369351001900505 |
0.751 |
|
2010 |
Barkoula NM, Garkhail SK, Peijs T. Effect of Compounding and Injection Molding on the Mechanical Properties of Flax Fiber Polypropylene Composites Journal of Reinforced Plastics and Composites. 29: 1366-1385. DOI: 10.1177/0731684409104465 |
0.341 |
|
2010 |
Gea S, Reynolds CT, Roohpur N, Soykeabkaew N, Wirjosentono B, Bilotti E, Peijs T. Biodegradable composites based on poly(ε-caprolactone) and bacterial cellulose as a reinforcing agent Journal of Biobased Materials and Bioenergy. 4: 384-390. DOI: 10.1166/Jbmb.2010.1108 |
0.787 |
|
2010 |
Arévalo R, Picot O, Wilson RM, Soykeabkaew N, Peijs T. All-cellulose composites by partial dissolution of cotton fibres Journal of Biobased Materials and Bioenergy. 4: 129-138. DOI: 10.1166/Jbmb.2010.1077 |
0.431 |
|
2010 |
Peijs T, Inam F, Wong DWY, Kuwata M. Multiscale hybrid micro-nanocomposites based on carbon nanotubes and carbon fibers Journal of Nanomaterials. 2010. DOI: 10.1155/2010/453420 |
0.454 |
|
2010 |
Bilotti E, Zhang R, Deng H, Baxendale M, Peijs T. Fabrication and property prediction of conductive and strain sensing TPU/CNT nanocomposite fibres Journal of Materials Chemistry. 20: 9449-9455. DOI: 10.1039/C0Jm01827A |
0.784 |
|
2010 |
Deng H, Bilotti E, Zhang R, Loos J, Peijs T. Effect of thermal annealing on the electrical conductivity of high-strength bicomponent polymer tapes containing carbon nanofillers Synthetic Metals. 160: 337-344. DOI: 10.1016/J.Synthmet.2009.11.001 |
0.786 |
|
2010 |
Gea S, Bilotti E, Reynolds CT, Soykeabkeaw N, Peijs T. Bacterial cellulose-poly(vinyl alcohol) nanocomposites prepared by an in-situ process Materials Letters. 64: 901-904. DOI: 10.1016/J.Matlet.2010.01.042 |
0.759 |
|
2010 |
Inam F, Yan H, Jayaseelan DD, Peijs T, Reece MJ. Electrically conductive alumina-carbon nanocomposites prepared by Spark Plasma Sintering Journal of the European Ceramic Society. 30: 153-157. DOI: 10.1016/J.Jeurceramsoc.2009.05.045 |
0.401 |
|
2010 |
Barkoula NM, Garkhail SK, Peijs T. Biodegradable composites based on flax/polyhydroxybutyrate and its copolymer with hydroxyvalerate Industrial Crops and Products. 31: 34-42. DOI: 10.1016/J.Indcrop.2009.08.005 |
0.489 |
|
2010 |
Inam F, Yan H, Peijs T, Reece MJ. The sintering and grain growth behaviour of ceramic-carbon nanotube nanocomposites Composites Science and Technology. 70: 947-952. DOI: 10.1016/J.Compscitech.2010.02.010 |
0.383 |
|
2010 |
Deng H, Reynolds CT, Cabrera NO, Barkoula NM, Alcock B, Peijs T. The water absorption behaviour of all-polypropylene composites and its effect on mechanical properties Composites Part B: Engineering. 41: 268-275. DOI: 10.1016/J.Compositesb.2010.02.007 |
0.396 |
|
2010 |
Zhang JM, Peijs T. Self-reinforced poly(ethylene terephthalate) composites by hot consolidation of Bi-component PET yarns Composites Part a-Applied Science and Manufacturing. 41: 964-972. DOI: 10.1016/J.Compositesa.2010.03.012 |
0.487 |
|
2010 |
Hapuarachchi TD, Peijs T. Multiwalled carbon nanotubes and sepiolite nanoclays as flame retardants for polylactide and its natural fibre reinforced composites Composites Part a-Applied Science and Manufacturing. 41: 954-963. DOI: 10.1016/J.Compositesa.2010.03.004 |
0.456 |
|
2010 |
Wong DWY, Lin L, McGrail PT, Peijs T, Hogg PJ. Improved fracture toughness of carbon fibre/epoxy composite laminates using dissolvable thermoplastic fibres Composites Part a-Applied Science and Manufacturing. 41: 759-767. DOI: 10.1016/J.Compositesa.2010.02.008 |
0.472 |
|
2010 |
Borreguero AM, Valverde JL, Peijs T, Rodríguez JF, Carmona M. Characterization of rigid polyurethane foams containing microencapsulated Rubitherm® RT27. Part I Journal of Materials Science. 45: 4462-4469. DOI: 10.1007/S10853-010-4529-X |
0.382 |
|
2010 |
Eichhorn SJ, Dufresne A, Aranguren M, Marcovich NE, Capadona JR, Rowan SJ, Weder C, Thielemans W, Roman M, Renneckar S, Gindl W, Veigel S, Keckes J, Yano H, Abe K, ... ... Peijs T, et al. Review: Current international research into cellulose nanofibres and nanocomposites Journal of Materials Science. 45: 1-33. DOI: 10.1007/S10853-009-3874-0 |
0.402 |
|
2010 |
Ma J, Deng H, Peijs T. Processing of Poly(propylene)/Carbon Nanotube Composites using scCO2‐Assisted Mixing Macromolecular Materials and Engineering. 295: 566-574. DOI: 10.1002/Mame.200900405 |
0.513 |
|
2010 |
Bilotti E, Deng H, Zhang R, Lu D, Bras W, Fischer HR, Peijs T. Synergistic reinforcement of highly oriented poly(propylene) tapes by sepiolite nanoclay Macromolecular Materials and Engineering. 295: 37-47. DOI: 10.1002/Mame.200900156 |
0.786 |
|
2010 |
Deng H, Bilotti E, Zhang R, Peijs T. Effective reinforcement of carbon nanotubes in polypropylene matrices Journal of Applied Polymer Science. 118: 30-41. DOI: 10.1002/App.30783 |
0.801 |
|
2010 |
Deng H, Skipa T, Bilotti E, Zhang R, Lellinger D, Mezzo L, Fu Q, Alig I, Peijs T. Preparation of high-performance conductive polymer fibers through morphological control of networks formed by nanofillers Advanced Functional Materials. 20: 1424-1432. DOI: 10.1002/Adfm.200902207 |
0.789 |
|
2009 |
Hapuarachchi TD, Peijs T. Aluminium trihydroxide in combination with ammonium polyphosphate as flame retardants for unsaturated polyester resin Express Polymer Letters. 3: 743-751. DOI: 10.3144/Expresspolymlett.2009.92 |
0.361 |
|
2009 |
Deng H, Skipa T, Zhang R, Lellinger D, Bilotti E, Alig I, Peijs T. Effect of melting and crystallization on the conductive network in conductive polymer composites Polymer. 50: 3747-3754. DOI: 10.1016/J.Polymer.2009.05.016 |
0.766 |
|
2009 |
Fina A, Tabuani D, Peijs T, Camino G. POSS GRAFTING ON PPgMA BY ONE-STEP REACTIVE BLENDING Polymer. 50: 218-226. DOI: 10.1016/J.Polymer.2008.11.002 |
0.328 |
|
2009 |
Dusza J, Blugan G, Morgiel J, Kuebler J, Inam F, Peijs T, Reece MJ, Puchy V. Hot pressed and spark plasma sintered zirconia/carbon nanofiber composites Journal of the European Ceramic Society. 29: 3177-3184. DOI: 10.1016/J.Jeurceramsoc.2009.05.030 |
0.474 |
|
2009 |
Alcock B, Cabrera NO, Barkoula NM, Peijs T. The effect of processing conditions on the mechanical properties and thermal stability of highly oriented PP tapes European Polymer Journal. 45: 2878-2894. DOI: 10.1016/J.Eurpolymj.2009.06.025 |
0.413 |
|
2009 |
Ciselli P, Zhang R, Wang Z, Reynolds CT, Baxendale M, Peijs T. Oriented UHMW-PE/CNT composite tapes by a solution casting-drawing process using mixed-solvents European Polymer Journal. 45: 2741-2748. DOI: 10.1016/J.Eurpolymj.2009.06.004 |
0.479 |
|
2009 |
Bilotti E, Zhang R, Deng H, Quero F, Fischer HR, Peijs T. Sepiolite needle-like clay for PA6 nanocomposites: An alternative to layered silicates? Composites Science and Technology. 69: 2587-2595. DOI: 10.1016/J.Compscitech.2009.07.016 |
0.769 |
|
2009 |
Zhang R, Dowden A, Deng H, Baxendale M, Peijs T. Conductive network formation in the melt of carbon nanotube/thermoplastic polyurethane composite Composites Science and Technology. 69: 1499-1504. DOI: 10.1016/J.Compscitech.2008.11.039 |
0.48 |
|
2009 |
Zhang JM, Reynolds CT, Peijs T. All-poly(ethylene terephthalate) composites by film stacking of oriented tapes Composites Part a-Applied Science and Manufacturing. 40: 1747-1755. DOI: 10.1016/J.Compositesa.2009.08.008 |
0.414 |
|
2009 |
Soykeabkaew N, Nishino T, Peijs T. All-cellulose composites of regenerated cellulose fibres by surface selective dissolution Composites Part a-Applied Science and Manufacturing. 40: 321-328. DOI: 10.1016/J.Compositesa.2008.10.021 |
0.458 |
|
2009 |
Garkhail S, Wieland B, George J, Soykeabkaew N, Peijs T. Transcrystallisation in PP/flax composites and its effect on interfacial and mechanical properties Journal of Materials Science. 44: 510-519. DOI: 10.1007/S10853-008-3089-9 |
0.432 |
|
2009 |
Soykeabkaew N, Sian C, Gea S, Nishino T, Peijs T. All-cellulose nanocomposites by surface selective dissolution of bacterial cellulose Cellulose. 16: 435-444. DOI: 10.1007/S10570-009-9285-1 |
0.424 |
|
2009 |
Alcock B, Cabrera NO, Barkoula NM, Peijs T. Direct Forming of All-Polypropylene Composites Products from Fabrics made of Co-Extruded Tapes Applied Composite Materials. 16: 117-134. DOI: 10.1007/S10443-009-9081-Y |
0.42 |
|
2009 |
Deng H, Zhang R, Reynolds CT, Bilotti E, Peijs T. Macromol. Mater. Eng. 11/2009 Macromolecular Materials and Engineering. 294. DOI: 10.1002/Mame.200990018 |
0.685 |
|
2009 |
Deng H, Zhang R, Reynolds CT, Bilotti E, Peijs T. A novel concept for highly oriented carbon nanotube composite tapes or fibres with high strength and electrical conductivity Macromolecular Materials and Engineering. 294: 749-755. DOI: 10.1002/Mame.200900151 |
0.8 |
|
2009 |
Deng H, Zhang R, Bilotti E, Loos J, Peijs T. Conductive polymer tape containing highly oriented carbon nanofillers Journal of Applied Polymer Science. 113: 742-751. DOI: 10.1002/App.29624 |
0.778 |
|
2008 |
Inam F, Yan H, Reece MJ, Peijs T. Dimethylformamide: an effective dispersant for making ceramic-carbon nanotube composites. Nanotechnology. 19: 195710. PMID 21825728 DOI: 10.1088/0957-4484/19/19/195710 |
0.412 |
|
2008 |
Wang W, Ciselli P, Kuznetsov E, Peijs T, Barber AH. Effective reinforcement in carbon nanotube-polymer composites. Philosophical Transactions of the Royal Society A. 366: 1613-1626. PMID 18192168 DOI: 10.1098/Rsta.2007.2175 |
0.513 |
|
2008 |
Ciselli P, Lu L, Busfield JJ, Peijs T. Multifunctional Elastomer Nanocomposites based on EPDM and Carbon Nanotubes Mrs Proceedings. 1143. DOI: 10.1557/Proc-1143-Kk02-05 |
0.386 |
|
2008 |
Barkoula N-, Alcock B, Cabrera NO, Peijs T. Fatigue Properties of Highly Oriented Polypropylene Tapes and All-Polypropylene Composites: Polymers & Polymer Composites. 16: 101-113. DOI: 10.1177/096739110801600203 |
0.47 |
|
2008 |
Soykeabkaew N, Arimoto N, Nishino T, Peijs T. All-cellulose composites by surface selective dissolution of aligned ligno-cellulosic fibres Composites Science and Technology. 68: 2201-2207. DOI: 10.1016/J.Compscitech.2008.03.023 |
0.479 |
|
2008 |
Cabrera NO, Alcock B, Peijs T. Design and manufacture of all-PP sandwich panels based on co-extruded polypropylene tapes Composites Part B-Engineering. 39: 1183-1195. DOI: 10.1016/J.Compositesb.2008.03.010 |
0.444 |
|
2008 |
Alcock B, Cabrera NO, Barkoula N-, Wang Z, Peijs T. The effect of temperature and strain rate on the impact performance of recyclable all-polypropylene composites Composites Part B-Engineering. 39: 537-547. DOI: 10.1016/J.Compositesb.2007.03.003 |
0.441 |
|
2008 |
Cabrera NO, Reynolds CT, Alcock B, Peijs T. Non-isothermal stamp forming of continuous tape reinforced all-polypropylene composite sheet Composites Part a-Applied Science and Manufacturing. 39: 1455-1466. DOI: 10.1016/J.Compositesa.2008.05.014 |
0.363 |
|
2008 |
Qin C, Soykeabkaew N, Xiuyuan N, Peijs T. The effect of fibre volume fraction and mercerization on the properties of all-cellulose composites Carbohydrate Polymers. 71: 458-467. DOI: 10.1016/J.Carbpol.2007.06.019 |
0.464 |
|
2008 |
Cabrera NO, Alcock B, Klompen ETJ, Peijs T. Filament Winding of Co-Extruded Polypropylene Tapes for Fully Recyclable All-Polypropylene Composite Products Applied Composite Materials. 15: 27-45. DOI: 10.1007/S10443-008-9055-5 |
0.393 |
|
2008 |
Bilotti E, Fischer HR, Peijs T. Polymer nanocomposites based on needle-like sepiolite clays: Effect of functionalized polymers on the dispersion of nanofiller, crystallinity, and mechanical properties Journal of Applied Polymer Science. 107: 1116-1123. DOI: 10.1002/App.25395 |
0.77 |
|
2007 |
Gea S, Torres FG, Troncoso OP, Reynolds CT, Vilasecca F, Iguchi M, Peijs T. Biocomposites Based on Bacterial Cellulose and Apple and Radish Pulp International Polymer Processing. 22: 497-501. DOI: 10.3139/217.2059 |
0.416 |
|
2007 |
Ciselli P, Wang Z, Peijs T. Reinforcing potential of carbon nanotubes in oriented polymer fibres Materials Technology. 22: 10-21. DOI: 10.1179/175355507X196493 |
0.533 |
|
2007 |
Wu X, Torres FG, Vilaseca F, Peijs T. Influence of the Processing Conditions on the Mechanical Properties of Chitin Whisker Reinforced Poly(caprolactone) Nanocomposites Journal of Biobased Materials and Bioenergy. 1: 341-350. DOI: 10.1166/Jbmb.2007.008 |
0.41 |
|
2007 |
Zhang R, Baxendale M, Peijs T. Universal resistivity-strain dependence of carbon nanotube/polymer composites Physical Review B. 76: 195433. DOI: 10.1103/Physrevb.76.195433 |
0.385 |
|
2007 |
Wang Z, Ciselli P, Peijs T. The extraordinary reinforcing efficiency of single-walled carbon nanotubes in oriented poly(vinyl alcohol) tapes Nanotechnology. 18: 455709. DOI: 10.1088/0957-4484/18/45/455709 |
0.467 |
|
2007 |
Ma J, Bilotti E, Peijs T, Darr JA. Preparation of polypropylene/sepiolite nanocomposites using supercritical CO2 assisted mixing European Polymer Journal. 43: 4931-4939. DOI: 10.1016/J.Eurpolymj.2007.09.010 |
0.758 |
|
2007 |
Alcock B, Cabrera NO, Barkoula N-, Reynolds CT, Govaert LE, Peijs T. The effect of temperature and strain rate on the mechanical properties of highly oriented polypropylene tapes and all-polypropylene composites Composites Science and Technology. 67: 2061-2070. DOI: 10.1016/J.Compscitech.2006.11.012 |
0.475 |
|
2007 |
Alcock B, Cabrera NO, Barkoula NM, Spoelstra AB, Loos J, Peijs T. The mechanical properties of woven tape all-polypropylene composites Composites Part a-Applied Science and Manufacturing. 38: 147-161. DOI: 10.1016/J.Compositesa.2006.01.003 |
0.477 |
|
2007 |
Hapuarachchi TD, Ren G, Fan M, Hogg PJ, Peijs T. Fire Retardancy of Natural Fibre Reinforced Sheet Moulding Compound Applied Composite Materials. 14: 251-264. DOI: 10.1007/S10443-007-9044-0 |
0.396 |
|
2007 |
Schimanski T, Loos J, Peijs T, Alcock B, Lemstra PJ. On the overdrawing of melt-spun isotactic polypropylene tapes Journal of Applied Polymer Science. 103: 2920-2931. DOI: 10.1002/App.25128 |
0.631 |
|
2007 |
Alcock B, Cabrera NO, Barkoula N-, Loos J, Peijs T. Interfacial properties of highly oriented coextruded polypropylene tapes for the creation of recyclable all‐polypropylene composites Journal of Applied Polymer Science. 104: 118-129. DOI: 10.1002/App.24588 |
0.445 |
|
2006 |
Inam F, Peijs T. Transmission light microscopy of carbon nanotubes-epoxy nanocomposites involving different dispersion methods Advanced Composites Letters. 15: 96369350601500. DOI: 10.1177/096369350601500101 |
0.412 |
|
2006 |
Alcock B, Cabrera NO, Barkoula N-, Peijs T. Low velocity impact performance of recyclable all-polypropylene composites Composites Science and Technology. 66: 1724-1737. DOI: 10.1016/J.Compscitech.2005.11.010 |
0.467 |
|
2006 |
Alcock B, Cabrera NO, Barkoula N-, Loos J, Peijs T. The mechanical properties of unidirectional all-polypropylene composites Composites Part a-Applied Science and Manufacturing. 37: 716-726. DOI: 10.1016/J.Compositesa.2005.07.002 |
0.475 |
|
2006 |
Goutianos S, Peijs T, Nyström B, Skrifvars M. Development of Flax Fibre based Textile Reinforcements for Composite Applications Applied Composite Materials. 13: 199-215. DOI: 10.1007/S10443-006-9010-2 |
0.465 |
|
2005 |
Abraham TN, George KE, Peijs T. Recyclable PP/polyamide composite Progress in Rubber Plastics and Recycling Technology. 21: 73-83. DOI: 10.1177/147776060502100105 |
0.468 |
|
2005 |
Barkoula N, Peijs T, Schimanski T, Loos J. Processing of single polymer composites using the concept of constrained fibers Polymer Composites. 26: 114-120. DOI: 10.1002/Pc.20082 |
0.424 |
|
2004 |
Schimanski T, Peijs T, Lemstra PJ, Loos J. Influence of Postdrawing Temperature on Mechanical Properties of Melt-Spun Isotactic Polypropylene Macromolecules. 37: 1810-1815. DOI: 10.1021/Ma034949S |
0.598 |
|
2004 |
Heuvel PWJvd, Goutianos S, Young RJ, Peijs T. Failure phenomena in fibre-reinforced composites. Part 6: a finite element study of stress concentrations in unidirectional carbon fibre-reinforced epoxy composites Composites Science and Technology. 64: 645-656. DOI: 10.1016/J.Compscitech.2003.06.003 |
0.432 |
|
2004 |
Goutianos S, Galiotis C, Peijs T. Compressive failure mechanisms in multi-fibre microcomposites Composites Part a-Applied Science and Manufacturing. 35: 461-475. DOI: 10.1016/J.Compositesa.2003.10.007 |
0.456 |
|
2003 |
Goutianos S, Peijs T. The Optimisation of Flax Fibre Yarns for the Development of High-Performance Natural Fibre Composites: Advanced Composites Letters. 12: 96369350301200. DOI: 10.1177/096369350301200602 |
0.416 |
|
2003 |
Peijs T. Composites for recyclability Materials Today. 6: 30-35. DOI: 10.1016/S1369-7021(03)00428-0 |
0.427 |
|
2003 |
Singleton ACN, Baillie CA, Beaumont PWR, Peijs T. On the mechanical properties, deformation and fracture of a natural fibre/recycled polymer composite Composites Part B-Engineering. 34: 519-526. DOI: 10.1016/S1359-8368(03)00042-8 |
0.469 |
|
2003 |
Goutianos S, Galiotis C, Peijs T. Mechanisms of stress transfer and interface integrity in carbon/epoxy composites under compression loading. Part II: Numerical approach International Journal of Solids and Structures. 40: 5521-5538. DOI: 10.1016/S0020-7683(03)00340-8 |
0.398 |
|
2002 |
Schrauwen B, Peijs T. Influence of Matrix Ductility and Fibre Architecture on the Repeated Impact Response of Glass-Fibre-Reinforced Laminated Composites Applied Composite Materials. 9: 331-352. DOI: 10.1023/A:1020267013414 |
0.365 |
|
2002 |
Goutianos S, Peijs T, Galiotis C. Comparative assessment of stress transfer efficiency in tension and compression Composites Part a-Applied Science and Manufacturing. 33: 1303-1309. DOI: 10.1016/S1359-835X(02)00166-5 |
0.318 |
|
2002 |
Goutianos S, Peijs T, Galiotis C. Mechanisms of stress transfer and interface integrity in carbon/epoxy composites under compression loading: Part I: Experimental investigation International Journal of Solids and Structures. 39: 3217-3231. DOI: 10.1016/S0020-7683(02)00240-8 |
0.351 |
|
2001 |
Goutianos S, Peijs T. Experimental and numerical investigation into fatigue damage mechanisms in multifibre microcomposites Plastics Rubber and Composites. 30: 222-232. DOI: 10.1179/146580101101541651 |
0.386 |
|
2001 |
Saalbrink A, Mureau M, Peijs T. Blends of poly(ethylene terephthalate) and epoxy as matrix material for continuous fibre reinforced composites Plastics Rubber and Composites. 30: 213-221. DOI: 10.1179/146580101101541642 |
0.422 |
|
2001 |
George J, Klompen ETJ, Peijs T. Thermal Degradation of Green and Upgraded Flax Fibres Advanced Composites Letters. 10: 96369350101000. DOI: 10.1177/096369350101000205 |
0.332 |
|
2001 |
Goutianos S, Peijs T. Fatigue Damage Mechanisms in Carbon-Epoxy Multi-Fibre Model Composites: Advanced Composites Letters. 10: 96369350101000. DOI: 10.1177/096369350101000103 |
0.407 |
|
2001 |
Peijs T. First International Conference On Eco-Composites (ECOCOMP) Materials Technology. 16: 253-255. DOI: 10.1080/10667857.2001.11752952 |
0.405 |
|
2001 |
Govaert LE, Schellens HJ, Thomassen HJM, Smit RJM, Terzoli L, Peijs T. A micromechanical approach to time-dependent failure in off-axis loaded polymer composites Composites Part a-Applied Science and Manufacturing. 32: 1697-1711. DOI: 10.1016/S1359-835X(01)00028-8 |
0.428 |
|
2001 |
Loos J, Schimanski T, Hofman J, Peijs T, Lemstra PJ. Morphological investigations of polypropylene single-fibre reinforced polypropylene model composites Polymer. 42: 3827-3834. DOI: 10.1016/S0032-3861(00)00660-1 |
0.681 |
|
2000 |
Wood JR, Zhao Q, Frogley MD, Meurs ER, Prins AD, Peijs T, Dunstan DJ, Daniel Wagner H. Carbon nanotubes: From molecular to macroscopic sensors Physical Review B - Condensed Matter and Materials Physics. 62: 7571-7575. DOI: 10.1103/Physrevb.62.7571 |
0.422 |
|
2000 |
Peijs T. Natural Fiber Based Composites Materials Technology. 15: 281-285. DOI: 10.1080/10667857.2000.11752892 |
0.338 |
|
2000 |
Garkhail SK, Heijenrath RWH, Peijs T. Mechanical Properties of Natural-Fibre-Mat- Reinforced Thermoplastics based on Flax Fibres and Polypropylene Applied Composite Materials. 7: 351. DOI: 10.1023/A:1026590124038 |
0.447 |
|
2000 |
Stamboulis A, Baillie CA, Garkhail SK, Melick HGHv, Peijs T. Environmental Durability of Flax Fibres and their Composites based on Polypropylene Matrix Applied Composite Materials. 7: 273-294. DOI: 10.1023/A:1026581922221 |
0.454 |
|
2000 |
Heuvel PWJvd, Peijs T, Young RJ. Failure phenomena in two-dimensional multi-fibre microcomposites Part 4 : A Raman spectroscopic study on the influence of the matrix yield stress on stress concentrations Composites Part a-Applied Science and Manufacturing. 31: 165-171. DOI: 10.1016/S1359-835X(99)00059-7 |
0.334 |
|
1999 |
Kok JMMd, Peijs T. Deformation, yield and fracture of unidirectional composites in transverse loading: 2. Influence of fibre–matrix adhesion Composites Part a-Applied Science and Manufacturing. 30: 917-932. DOI: 10.1016/S1359-835X(98)00171-7 |
0.41 |
|
1999 |
Geers MGD, De Borst R, Peijs T. Mixed numerical-experimental identification of non-local characteristics of random-fibre-reinforced composites Composites Science and Technology. 59: 1569-1578. DOI: 10.1016/S0266-3538(99)00017-2 |
0.352 |
|
1999 |
Gamstedt EK, Berglund LA, Peijs T. Fatigue mechanisms in unidirectional glass-fibre-reinforced polypropylene Composites Science and Technology. 59: 759-768. DOI: 10.1016/S0266-3538(98)00119-5 |
0.41 |
|
1998 |
Heuvel PWJvd, Wubbolts MK, Young RJ, Peijs T. Failure phenomena in two-dimensional multi-fibre model composites: 5. A finite element study Composites Part a-Applied Science and Manufacturing. 29: 1121-1135. DOI: 10.1016/S1359-835X(98)00089-X |
0.382 |
|
1998 |
Saalbrink A, Lorteije A, Peijs T. The influence of processing parameters on interphase morphology in polymer composites based on phase-separating thermoplast/epoxy blends Composites Part a-Applied Science and Manufacturing. 29: 1243-1250. DOI: 10.1016/S1359-835X(98)00043-8 |
0.417 |
|
1998 |
Meurs PFM, Schrauwen BAG, Schreurs PJG, Peijs T. Determination of the interfacial normal strength using single fibre model composites Composites Part a-Applied Science and Manufacturing. 29: 1027-1034. DOI: 10.1016/S1359-835X(97)00130-9 |
0.329 |
|
1998 |
Oever MJAvd, Peijs T. Continuous-glass-fibre-reinforced polypropylene composites II. Influence of maleic-anhydride modified polypropylene on fatigue behaviour Composites Part a-Applied Science and Manufacturing. 29: 227-239. DOI: 10.1016/S1359-835X(97)00089-4 |
0.419 |
|
1998 |
Peijs T, Garkhail S, Heijenrath R, Oever MvD, Bos H. Thermoplastic composites based on flax fibres and polypropylene: Influence of fibre length and fibre volume fraction on mechanical properties Macromolecular Symposia. 127: 193-203. DOI: 10.1002/Masy.19981270126 |
0.452 |
|
1997 |
Heuvel PWJvd, Hogeweg B, Peijs T. An experimental and numerical investigation into the single-fibre fragmentation test : stress transfer by a locally yielding matrix Composites Part a-Applied Science and Manufacturing. 28: 237-249. DOI: 10.1016/S1359-835X(96)00114-5 |
0.337 |
|
1997 |
Heuvel PWJvd, Peijs T, Young RJ. Failure phenomena in two-dimensional multi-fibre microcomposites—3. A raman spectroscopy study of the influence of interfacial debonding on stress concentrations Composites Science and Technology. 57: 899-911. DOI: 10.1016/S0266-3538(97)00004-3 |
0.32 |
|
1996 |
Heijenrath RWH, Peijs T. Natural-fibre-mat-reinforced thermoplastic composites based on flax fibres and polypropylene Advanced Composites Letters. 5: 81-85. DOI: 10.1177/096369359600500303 |
0.414 |
|
1996 |
de Haan J, Peijs T. Mechanical Properties of Flexible Knitted Composites Advanced Composites Letters. 5: 096369359600500. DOI: 10.1177/096369359600500102 |
0.341 |
|
1996 |
Geers MGD, Peijs T, Brekelmans WAM, Borst Rd. Experimental monitoring of strain localization and failure behaviour of composite materials Composites Science and Technology. 56: 1283-1290. DOI: 10.1016/S0266-3538(96)00088-7 |
0.304 |
|
1996 |
Venderbosch RW, Peijs T, Meijer HEH, Lemstra PL. Fibre-reinforced composites with tailored interphases using PPE/epoxy blends as a matrix system Composites Part a-Applied Science and Manufacturing. 27: 895-905. DOI: 10.1016/1359-835X(96)00043-7 |
0.495 |
|
1996 |
Heuvel PWJvd, Bruggen YJWvd, Peijs T. Failure phenomena in multi-fibre model composites: Part 1. An experimental investigation into the influence of fibre spacing and fibre-matrix adhesion Composites Part a-Applied Science and Manufacturing. 27: 855-859. DOI: 10.1016/1359-835X(96)00023-1 |
0.35 |
|
1996 |
Meurs PFM, Schreurs PJG, Peijs T, Meijer HEH. Characterization of interphase conditions in composite materials Composites Part a-Applied Science and Manufacturing. 27: 781-786. DOI: 10.1016/1359-835X(96)00020-6 |
0.309 |
|
1995 |
Govaert LE, Peijs T. Influence of applied stress and temperature on the deformation behaviour of high-strength poly(vinyl alcohol) fibres Polymer. 36: 3589-3592. DOI: 10.1016/0032-3861(95)92032-A |
0.331 |
|
1995 |
Peijs T, Vught RJMv, Govaert LE. Mechanical properties of poly(vinyl alcohol) fibres and composites Composites. 26: 83-90. DOI: 10.1016/0010-4361(95)90407-Q |
0.454 |
|
1994 |
Oever MJAvd, Peijs T. Influence of Maleic-Anhydride Polypropylene on Transverse Cracking in Glass Fibre-Reinforced Polypropylene Cross-Ply Laminates Advanced Composites Letters. 3: 96369359400300. DOI: 10.1177/096369359400300505 |
0.305 |
|
1994 |
Peijs T, Rijsdijk HA, de Kok JMM, Lemstra PJ. The role of interface and fibre anisotropy in controlling the performance of polyethylene-fibre-reinforced composites Composites Science and Technology. 52: 449-466. DOI: 10.1016/0266-3538(94)90180-5 |
0.656 |
|
1994 |
Peijs T, Smets EAM, Govaert LE. Strain rate and temperature effects on energy absorption of polyethylene fibres and composites Applied Composite Materials. 1: 35-54. DOI: 10.1007/Bf00567210 |
0.345 |
|
Show low-probability matches. |