Year |
Citation |
Score |
2022 |
Chari CS, Taylor ZW, Bezur A, Xie S, Faber KT. Nanoscale engineering of gold particles in 18th century Böttger lusters and glazes. Proceedings of the National Academy of Sciences of the United States of America. 119: e2120753119. PMID 35446687 DOI: 10.1073/pnas.2120753119 |
0.717 |
|
2020 |
Sturdy LF, Wright MS, Yee A, Casadio F, Faber KT, Shull KR. Effects of zinc oxide filler on the curing and mechanical response of alkyd coatings Polymer. 191: 122222. DOI: 10.1016/J.Polymer.2020.122222 |
0.538 |
|
2018 |
Miller SM, Xiao X, Setlock JA, Faber KT. Freeze-cast alumina pore networks: Effects of processing parameters in steady-state solidification regimes of aqueous slurries Journal of the European Ceramic Society. 38: 5134-5143. DOI: 10.1016/J.Jeurceramsoc.2018.07.009 |
0.302 |
|
2017 |
Liu Z, Han K, Chen-Wiegart YK, Wang J, Kung HH, Wang J, Barnett SA, Faber KT. X-ray nanotomography analysis of the microstructural evolution of LiMn2O4 electrodes Journal of Power Sources. 360: 460-469. DOI: 10.1016/J.Jpowsour.2017.06.027 |
0.301 |
|
2016 |
Childers AS, Brodnik NR, Faber KT. Interfacial frictional stresses and fracture toughness of biomorphic graphite/copper interfaces Materials Letters. 174: 106-109. DOI: 10.1016/J.Matlet.2016.03.065 |
0.385 |
|
2016 |
Stolzenburg F, Kenesei P, Almer J, Lee KN, Johnson MT, Faber KT. The influence of calcium-magnesium-aluminosilicate deposits on internal stresses in Yb2Si2O7 multilayer environmental barrier coatings Acta Materialia. 105: 189-198. DOI: 10.1016/J.Actamat.2015.12.016 |
0.712 |
|
2015 |
Stolzenburg F, Johnson MT, Lee KN, Jacobson NS, Faber KT. The interaction of calcium-magnesium-aluminosilicate with ytterbium silicate environmental barrier materials Surface and Coatings Technology. DOI: 10.1016/J.Surfcoat.2015.08.069 |
0.687 |
|
2014 |
Shanti NO, Chan VWL, Stock SR, De Carlo F, Thornton K, Faber KT. X-ray micro-computed tomography and tortuosity calculations of percolating pore networks Acta Materialia. 71: 126-135. DOI: 10.1016/J.Actamat.2014.03.003 |
0.764 |
|
2013 |
Faber KT, Lara‐Curzio E. Emerging Opportunities in Ceramics: Reports from the 4th International Congress on Ceramics International Journal of Applied Ceramic Technology. 10: 377-378. DOI: 10.1111/Ijac.12089 |
0.331 |
|
2013 |
Ramirez-Rico J, Stolzenburg F, Almer JD, Routbort JL, Singh D, Faber KT. In situ imaging and strain determination during fracture in a SiC/SiC ceramic matrix composite Scripta Materialia. 69: 497-500. DOI: 10.1016/J.Scriptamat.2013.05.032 |
0.705 |
|
2013 |
Hsiung CHH, Pyzik AJ, Gulsoy EB, De Carlo F, Xiao X, Faber KT. Impact of doping on the mechanical properties of acicular mullite Journal of the European Ceramic Society. 33: 1955-1965. DOI: 10.1016/J.Jeurceramsoc.2013.02.006 |
0.773 |
|
2013 |
Hsiung CHH, Pyzik AJ, De Carlo F, Xiao X, Stock SR, Faber KT. Microstructure and mechanical properties of acicular mullite Journal of the European Ceramic Society. 33: 503-513. DOI: 10.1016/J.Jeurceramsoc.2012.09.017 |
0.763 |
|
2013 |
Chen-Wiegart YK, Liu Z, Faber KT, Barnett SA, Wang J. 3D analysis of a LiCoO2–Li(Ni1/3Mn1/3Co1/3)O2 Li-ion battery positive electrode using x-ray nano-tomography Electrochemistry Communications. 28: 127-130. DOI: 10.1016/J.Elecom.2012.12.021 |
0.325 |
|
2013 |
Johnson MT, Childers AS, De Carlo F, Xiao X, Faber KT. Wood-derived copper-graphite composites produced via additive-assisted electrodeposition Composites Science and Technology. 89: 61-68. DOI: 10.1016/J.Compscitech.2013.09.010 |
0.33 |
|
2013 |
Johnson MT, Childers AS, Ramírez-Rico J, Wang H, Faber KT. Thermal conductivity of wood-derived graphite and copper-graphite composites produced via electrodeposition Composites Part a: Applied Science and Manufacturing. 53: 182-189. DOI: 10.1016/J.Compositesa.2013.06.009 |
0.33 |
|
2012 |
Rohrer GS, Affatigato M, Backhaus M, Bordia RK, Chan HM, Curtarolo S, Demkov A, Eckstein JN, Faber KT, Garay JE, Gogotsi Y, Huang L, Jones LE, Kalinin SV, Lad RJ, et al. Challenges in ceramic science: A report from the workshop on emerging research areas in ceramic science Journal of the American Ceramic Society. 95: 3699-3712. DOI: 10.1111/Jace.12033 |
0.317 |
|
2012 |
Shanti NO, Denolf GC, Shull KR, Faber KT. Liquid desiccant solvent extraction of alumina-filled thermoreversible gels Journal of the American Ceramic Society. 95: 509-514. DOI: 10.1111/J.1551-2916.2011.04884.X |
0.751 |
|
2012 |
Shanti NO, Bierschenk DM, Barnett SA, Faber KT. Direct lamination of solid oxide fuel cell anode support, anode, and electrolyte by sequential tape casting of thermoreversible gel slips Journal of Power Sources. 212: 43-46. DOI: 10.1016/J.Jpowsour.2012.03.073 |
0.761 |
|
2012 |
Faber KT, Shanti NO. Gelcasting of Ceramic Bodies Ceramics and Composites Processing Methods. 199-234. DOI: 10.1002/9781118176665.ch6 |
0.748 |
|
2011 |
Johnson MT, Faber KT. Catalytic graphitization of three-dimensional wood-derived porous scaffolds Journal of Materials Research. 26: 18-25. DOI: 10.1557/Jmr.2010.88 |
0.317 |
|
2011 |
Harder BJ, Ramírez-Rico J, Almer JD, Lee KN, Faber KT. Chemical and mechanical consequences of environmental barrier coating exposure to calcium-magnesium-aluminosilicate Journal of the American Ceramic Society. 94. DOI: 10.1111/J.1551-2916.2011.04448.X |
0.75 |
|
2010 |
Parfen’eva LS, Orlova TS, Smirnov BI, Smirnov IA, Misiorek H, Jezowski A, Faber KT. Thermal conductivity of the pine-biocarbon-preform/copper composite Physics of the Solid State. 52: 1348-1355. DOI: 10.1134/S1063783410070048 |
0.32 |
|
2010 |
Parfen’eva LS, Orlova TS, Kartenko NF, Sharenkova NV, Smirnov BI, Smirnov IA, Misiorek H, Jezowski A, Wilkes TE, Faber KT. Thermal conductivity of high-porosity biocarbon preforms of beech wood Physics of the Solid State. 52: 1115-1122. DOI: 10.1134/S1063783410060028 |
0.308 |
|
2010 |
Harder BJ, Faber KT. Transformation kinetics in plasma-sprayed barium- and strontium-doped aluminosilicate (BSAS) Scripta Materialia. 62: 282-285. DOI: 10.1016/J.Scriptamat.2009.11.019 |
0.716 |
|
2010 |
Pappacena KE, Johnson MT, Xie S, Faber KT. Processing of wood-derived copper–silicon carbide composites via electrodeposition Composites Science and Technology. 70: 485-491. DOI: 10.1016/J.Compscitech.2009.12.019 |
0.377 |
|
2010 |
Pappacena KE, Johnson MT, Wang H, Porter WD, Faber KT. Thermal properties of wood-derived copper–silicon carbide composites fabricated via electrodeposition Composites Science and Technology. 70: 478-484. DOI: 10.1016/J.Compscitech.2009.11.011 |
0.354 |
|
2010 |
Weyant CM, Almer J, Faber KT. Through-thickness determination of phase composition and residual stresses in thermal barrier coatings using high-energy X-rays Acta Materialia. 58: 943-951. DOI: 10.1016/J.Actamat.2009.10.010 |
0.787 |
|
2010 |
Chen Z, Sucech S, Faber KT. A hierarchical study of the mechanical properties of gypsum Journal of Materials Science. 45: 4444-4453. DOI: 10.1007/S10853-010-4527-Z |
0.316 |
|
2009 |
Harder BJ, Almer J, Lee KN, Faber KT. In situ stress analysis of multilayer environmental barrier coatings Powder Diffraction. 24: 94-98. DOI: 10.1154/1.3120602 |
0.739 |
|
2009 |
Kardashev BK, Orlova TS, Smirnov BI, Wilkes TE, Faber KT. Young’s modulus and internal friction in porous biocarbon white pine wood precursors Physics of the Solid State. 51: 2463-2468. DOI: 10.1134/S1063783409120063 |
0.342 |
|
2009 |
Shanti NO, Hovis DB, Seitz ME, Montgomery JK, Baskin DM, Faber KT. Ceramic laminates by gelcasting International Journal of Applied Ceramic Technology. 6: 593-606. DOI: 10.1111/J.1744-7402.2008.02312.X |
0.751 |
|
2009 |
Seitz ME, Shull KR, Faber KT. Acrylic triblock copolymer design for thermoreversible gelcasting of ceramics: Rheological and green body properties Journal of the American Ceramic Society. 92: 1519-1525. DOI: 10.1111/J.1551-2916.2009.03059.X |
0.773 |
|
2009 |
Harder BJ, Almer JD, Weyant CM, Lee KN, Faber KT. Residual stress analysis of multilayer environmental barrier coatings Journal of the American Ceramic Society. 92: 452-459. DOI: 10.1111/J.1551-2916.2008.02888.X |
0.801 |
|
2009 |
Wilkes TE, Stock SR, Carlo FD, Xiao X, Faber KT. X-ray micro-computed tomography of beech wood and biomorphic C, SiC and Al/SiC composites Philosophical Magazine. 89: 1373-1389. DOI: 10.1080/14786430902956457 |
0.356 |
|
2009 |
Wilkes TE, Harder BJ, Almer JD, Faber KT. Load partitioning in honeycomb-like silicon carbide aluminum alloy composites Acta Materialia. 57: 6234-6242. DOI: 10.1016/J.Actamat.2009.08.050 |
0.738 |
|
2008 |
Wilkes TE, Pastor JY, Llorca J, Faber KT. Mechanical properties of wood-derived silicon carbide aluminum-alloy composites as a function of temperature Journal of Materials Research. 23: 1732-1743. DOI: 10.1557/Jmr.2008.0197 |
0.347 |
|
2008 |
Harder BJ, Faber KT, Almer J, Lee KN. D-54 In Situ Heating Studies on the Internal Stresses of Multilayer Environmental Barrier Coatings Powder Diffraction. 23: 178-178. DOI: 10.1154/1.2951702 |
0.713 |
|
2008 |
Parfen’eva LS, Orlova TS, Kartenko NF, Sharenkova NV, Smirnov BI, Smirnov IA, Misiorek H, Jezowski A, Wilkes TE, Faber KT. Thermal conductivity of high-porosity biocarbon precursors of white pine wood Physics of the Solid State. 50: 2245-2255. DOI: 10.1134/S1063783408120032 |
0.32 |
|
2008 |
Kardashev BK, Orlova TS, Smirnov BI, Wilkes TE, Faber KT. Elasticity and inelasticity of the SiC/Al-13Si-9Mg biomorphic metal ceramics Physics of the Solid State. 50: 1882-1887. DOI: 10.1134/S1063783408100168 |
0.308 |
|
2008 |
Weyant CM, Faber KT. Processing-microstructure relationships for plasma-sprayed yttrium aluminum garnet Surface and Coatings Technology. 202: 6081-6089. DOI: 10.1016/J.Surfcoat.2008.07.008 |
0.775 |
|
2008 |
Kaul VS, Faber KT. Nanoindentation analysis of the elastic properties of porous SiC derived from wood Scripta Materialia. 58: 886-889. DOI: 10.1016/J.Scriptamat.2008.01.018 |
0.782 |
|
2008 |
Hovis DB, Faber KT, Kenik EA. Texture and microstructural development in gelcast barium hexaferrite Journal of Materials Science. 43: 1836-1843. DOI: 10.1007/S10853-007-2375-2 |
0.765 |
|
2007 |
Faber KT, Weyant CM, Harder B, Almer J, Lee K. Internal stresses and phase stability in multiphase environmental barrier coatings International Journal of Materials Research. 98: 1188-1195. DOI: 10.3139/146.101590 |
0.788 |
|
2007 |
Pappacena KE, Faber KT, Wang H, Porter WD. Thermal Conductivity of Porous Silicon Carbide Derived from Wood Precursors Journal of the American Ceramic Society. 90: 2855-2862. DOI: 10.1111/J.1551-2916.2007.01777.X |
0.308 |
|
2007 |
Seitz ME, Burghardt WR, Faber KT, Shull KR. Self-assembly and stress relaxation in acrylic triblock copolymer gels Macromolecules. 40: 1218-1226. DOI: 10.1021/Ma061993+ |
0.766 |
|
2006 |
Weyant CM, Faber KT, Almer JD, Guiheen JV. Residual stress and microstructural evolution in environmental barrier coatings of tantalum oxide alloyed with aluminum oxide and lanthanum oxide Journal of the American Ceramic Society. 89: 971-978. DOI: 10.1111/J.1551-2916.2005.00830.X |
0.77 |
|
2006 |
Evans AG, Faber KT. Crack‐Growth Resistance of Microcracking Brittle Materials Journal of the American Ceramic Society. 67: 255-260. DOI: 10.1111/J.1151-2916.1984.Tb18842.X |
0.305 |
|
2006 |
Wilkes T, Young M, Sepulveda R, Dunand D, Faber K. Composites by aluminum infiltration of porous silicon carbide derived from wood precursors Scripta Materialia. 55: 1083-1086. DOI: 10.1016/J.Scriptamat.2006.08.040 |
0.369 |
|
2006 |
Kaul VS, Faber KT, Sepúlveda R, de Arellano López AR, Martínez-Fernández J. Precursor selection and its role in the mechanical properties of porous SiC derived from wood Materials Science and Engineering A. 428: 225-232. DOI: 10.1016/J.Msea.2006.05.033 |
0.78 |
|
2005 |
Weyant CM, Faber KT, Almer JD, Guiheen JV. Residual stress and microstructural evolution in tantalum oxide coatings on silicon nitride Journal of the American Ceramic Society. 88: 2169-2176. DOI: 10.1111/J.1551-2916.2005.00396.X |
0.785 |
|
2005 |
Zimmerman MH, Faber KT, Fuller ER. Forming textured microstructures via the gelcasting technique Journal of the American Ceramic Society. 80: 2725-2729. DOI: 10.1111/J.1151-2916.1997.Tb03184.X |
0.317 |
|
2004 |
Trice RW, Faber KT. Role of Lamellae Morphology on the Microstructural Development and Mechanical Properties of Small-Particle Plasma-Sprayed Alumina Journal of the American Ceramic Society. 83: 889-896. DOI: 10.1111/J.1151-2916.2000.Tb01290.X |
0.371 |
|
2004 |
Easley TC, Faber KT, Shah SP. Use of a Crack‐Bridging Single‐Fiber Pullout Test to Study Steel Fiber/Cementitious Matrix Composites Journal of the American Ceramic Society. 82: 3513-3520. DOI: 10.1111/J.1151-2916.1999.Tb02274.X |
0.774 |
|
2004 |
Arellano-López ARd, Faber KT. Microstructural Characterization of Small‐Particle Plasma Spray Coatings Journal of the American Ceramic Society. 82: 2204-2208. DOI: 10.1111/J.1151-2916.1999.Tb02063.X |
0.35 |
|
2004 |
Su YJ, Trice RW, Faber KT, Wang H, Porter WD. Thermal Conductivity, Phase Stability, and Oxidation Resistance of Y3Al5O12 (YAG)/Y2O3-ZrO2 (YSZ) Thermal-Barrier Coatings Oxidation of Metals. 61: 253-271. DOI: 10.1023/B:Oxid.0000025334.02788.D3 |
0.349 |
|
2004 |
Moldovan M, Weyant CM, Johnson DL, Faber KT. Tantalum oxide coatings as candidate environmental barriers Journal of Thermal Spray Technology. 13: 51-56. DOI: 10.1007/S11666-004-0049-Z |
0.36 |
|
2003 |
Montgomery JK, Botha AS, Drzal PL, Shull KR, Faber KT. A thermoreversible gelcasting technique for ceramic laminates Scripta Materialia. 48: 785-789. DOI: 10.1016/S1359-6462(02)00517-1 |
0.564 |
|
2002 |
Su YJ, Bernecki TF, Faber KT. In situ characterization of small-particle plasma sprayed powders Journal of Thermal Spray Technology. 11: 52-61. DOI: 10.1361/105996302770348970 |
0.487 |
|
2002 |
Montgomery JK, Drzal PL, Shull KR, Faber KT. Thermoreversible gelcasting: A novel ceramic processing technique Journal of the American Ceramic Society. 85: 1164-1168. DOI: 10.1111/J.1151-2916.2002.Tb00239.X |
0.566 |
|
2002 |
Trice RW, Su YJ, Mawdsley JR, Faber KT, De Arellano-López AR, Wang H, Porter WD. Effect of heat treatment on phase stability, microstructure, and thermal conductivity of plasma-sprayed YSZ Journal of Materials Science. 37: 2359-2365. DOI: 10.1023/A:1015310509520 |
0.658 |
|
2002 |
Trice RW, Batson C, Scharff C, Faber KT. The role of starting powder size on the compressive response of stand-alone plasma-sprayed alumina coatings Journal of Materials Science. 37: 629-636. DOI: 10.1023/A:1013738112206 |
0.341 |
|
2002 |
Gaies D, Faber KT. Thermal properties of pitch-derived graphite foam Carbon. 40: 1137-1140. DOI: 10.1016/S0008-6223(02)00099-4 |
0.323 |
|
2001 |
Torrents JM, Easley TC, Faber KT, Mason TO, Shah SP. Evolution of Impedance Spectra during Debonding and Pullout of Single Steel Fibers from Cement Journal of the American Ceramic Society. 84: 740-746. DOI: 10.1111/J.1151-2916.2001.Tb00735.X |
0.771 |
|
2001 |
Easley TC, Faber KT, Shah SP. Moire interferometry analysis of fiber debonding Journal of Engineering Mechanics. 127: 625-629. DOI: 10.1061/(Asce)0733-9399(2001)127:6(625) |
0.771 |
|
2001 |
Su YJ, Wang H, Porter WD, Lopez ARdA, Faber KT. Thermal conductivity and phase evolution of plasma-sprayed multilayer coatings Journal of Materials Science. 36: 3511-3518. DOI: 10.1023/A:1017932617123 |
0.383 |
|
2001 |
Hovis DB, Faber KT. Textured microstructures in barium hexaferrite by magnetic field assisted gelcasting and templated grain growth Scripta Materialia. 44: 2525-2529. DOI: 10.1016/S1359-6462(01)00957-5 |
0.762 |
|
2001 |
Zimmerman MH, Baskin DM, Faber KT, Fuller ER, Allen AJ, Keane DT. Fracture of a textured anisotropic ceramic Acta Materialia. 49: 3231-3242. DOI: 10.1016/S1359-6454(01)00224-5 |
0.367 |
|
2001 |
Mawdsley JR, Su YJ, Faber KT, Bernecki TF. Optimization of small-particle plasma-sprayed alumina coatings using designed experiments Materials Science and Engineering A. 308: 189-199. DOI: 10.1016/S0921-5093(00)01992-4 |
0.666 |
|
2000 |
López ARdA, Chiou WA, Faber KT. Estudio comparativo de técnicas de preparación de muestras para microscopía electrónica de transmisión de recubrimientos cerámicos proyectados por plasma Boletin De La Sociedad Espanola De Ceramica Y Vidrio. 39: 735-740. DOI: 10.3989/Cyv.2000.V39.I6.774 |
0.338 |
|
2000 |
Boling-Risser MA, Goretta KC, Routbort JL, Faber KT. Effect of microstructure on high-temperature compressive creep of self-reinforced hot-pressed silicon nitride Journal of the American Ceramic Society. 83: 3065-3069. DOI: 10.1111/J.1151-2916.2000.Tb01683.X |
0.348 |
|
2000 |
Trice RW, Prine DW, Faber KT. Deformation Mechanisms in Compression‐Loaded, Stand‐Alone Plasma‐Sprayed Alumina Coatings Journal of the American Ceramic Society. 83: 3057-3064. DOI: 10.1111/J.1151-2916.2000.Tb01682.X |
0.341 |
|
2000 |
Montgomery JK, Faber KT. Processing of stepped-density alumina via gelcasting and reaction bonding techniques Scripta Materialia. 42: 283-287. DOI: 10.1016/S1359-6462(99)00342-5 |
0.393 |
|
2000 |
Trice RW, Brewer LN, Faber KT. Dissociation of NZP (Ca0.5Sr0.5Zr4P6O24) during plasma spraying Scripta Materialia. 42: 855-860. DOI: 10.1016/S1359-6462(00)00303-1 |
0.352 |
|
1999 |
Trice RW, Su YJ, Faber KT, Wang H, Porter W. The role of NZP additions in plasma-sprayed YSZ: microstructure, thermal conductivity and phase stability effects Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 272: 284-291. DOI: 10.1016/S0921-5093(99)00468-2 |
0.359 |
|
1998 |
López ARdA, Chiou W-, Faber KT. Comparison of Focused Ion Beam and Conventional Techniques on TEM Specimen Preparation of Metal-Ceramic Interfaces Microscopy and Microanalysis. 4: 860-861. DOI: 10.1017/S1431927600024429 |
0.362 |
|
1998 |
Saigal A, Fuller ER, Langer SA, Carter WC, Zimmerman MH, Faber KT. Effect of interface properties on microcracking of iron titanate Scripta Materialia. 38: 1449-1453. DOI: 10.1016/S1359-6462(98)00040-2 |
0.308 |
|
1997 |
Baskin DM, Faber KT, Ohtsuka H. Forming tough, single phase laminates of Fe_2TiO_5 via magnetic-assisted gelcasting Journal of the Japan Institute of Metals. 61: 1306-1310. DOI: 10.2320/Jinstmet1952.61.12_1306 |
0.342 |
|
1997 |
Faber KT. CERAMIC COMPOSITE INTERFACES: Properties and Design Annual Review of Materials Science. 27: 499-524. DOI: 10.1146/Annurev.Matsci.27.1.499 |
0.338 |
|
1997 |
Baskin DM, Zimmerman MH, Faber KT, Fuller ER. Forming Single‐Phase Laminates via the Gelcasting Technique Journal of the American Ceramic Society. 80: 2929-2932. DOI: 10.1111/J.1151-2916.1997.Tb03213.X |
0.354 |
|
1997 |
Cazzato A, Faber KT. Fracture energy of glass-alumina interfaces via the bimaterial bend test Journal of the American Ceramic Society. 80: 181-188. DOI: 10.1111/J.1151-2916.1997.Tb02808.X |
0.331 |
|
1997 |
Christensen RJ, Faber KT. Cyclic fatigue of reaction-bonded silicon nitride at elevated temperatures Journal of Materials Science. 32: 949-955. DOI: 10.1023/A:1018509902025 |
0.309 |
|
1996 |
Paulik SW, Zimmerman MH, Faber KT, Fuller ER. Residual stress in ceramics with large thermal expansion anisotropy Journal of Materials Research. 11: 2795-2803. DOI: 10.1557/Jmr.1996.0354 |
0.347 |
|
1996 |
Day PS, Skamser DJ, Faber KT, Jennings HM, Johnson DL. Damage Tolerance of Silicon Carbide‐ and Alumina‐Matrix Surface Composites Journal of the American Ceramic Society. 79: 1117-1120. DOI: 10.1111/J.1151-2916.1996.Tb08558.X |
0.331 |
|
1996 |
Tandon S, Faber KT. On loading rate effects in toughening processes Scripta Materialia. 34: 757-762. DOI: 10.1016/1359-6462(95)00586-2 |
0.317 |
|
1995 |
Steyer TE, Faber KT. Mechanical Behavior of Alumina Reinforced with Carbon‐Coated Silicon Carbide Whiskers Journal of the American Ceramic Society. 78: 2673-2679. DOI: 10.1111/J.1151-2916.1995.Tb08039.X |
0.396 |
|
1995 |
Mumm DR, Faber KT. Interfacial debonding and sliding in brittle-matrix composites measured using an improved fiber pullout technique Acta Metallurgica Et Materialia. 43: 1259-1270. DOI: 10.1016/0956-7151(94)00294-R |
0.331 |
|
1994 |
Tandon S, Faber K, Bazant Z. Crack Stability in the Fracture of Cementitious Materials Mrs Proceedings. 370. DOI: 10.1557/Proc-370-387 |
0.333 |
|
1994 |
Paulik SW, Faber KT, Fuller ER. Development of Textured Microstructures in Ceramics with Large Thermal Expansion Anisotropy Journal of the American Ceramic Society. 77: 454-458. DOI: 10.1111/J.1151-2916.1994.Tb07014.X |
0.345 |
|
1993 |
Cai H, Faber KT. Effective dilatational transformation toughening in brittle materials Scripta Metallurgica Et Materialia. 28: 1161-1166. DOI: 10.1016/0956-716X(93)90027-P |
0.337 |
|
1993 |
Jordan DW, Faber KT. X-ray residual stress analysis of a ceramic thermal barrier coating undergoing thermal cycling Thin Solid Films. 235: 137-141. DOI: 10.1016/0040-6090(93)90256-O |
0.374 |
|
1992 |
Cai H, Faber KT, Fuller ER. Crack Bridging by Inclined Fibers/Whiskers in Ceramic Composites Journal of the American Ceramic Society. 75: 3111-3117. DOI: 10.1111/J.1151-2916.1992.Tb04395.X |
0.316 |
|
1992 |
Gu W-, Faber KT, Steinbrech RW. Microcracking and R-curve behavior in SiC-TiB2 composites Acta Metallurgica Et Materialia. 40: 3121-3128. DOI: 10.1016/0956-7151(92)90475-T |
0.351 |
|
1991 |
Cai H, Moran B, Faber KT. Analysis of a Microcrack Prototype and Its Implications for Microcrack Toughening Journal of the American Ceramic Society. 74: 1695-1698. DOI: 10.1111/J.1151-2916.1991.Tb07164.X |
0.333 |
|
1990 |
Goettler RW, Faber KT. Interfacial shear stresses in fiber-reinforced glasses Composites Science and Technology. 37: 129-147. DOI: 10.1016/0266-3538(90)90096-N |
0.379 |
|
1988 |
Faber KT, Iwagoshi T, Ghosh A. Toughening by Stress‐Induced Microcracking in Two‐Phase Ceramics Journal of the American Ceramic Society. 71. DOI: 10.1111/J.1151-2916.1988.Tb06419.X |
0.384 |
|
1987 |
Bowling GD, Faber KT, Hoagland RG. Computer Simulations of R‐Curve Behavior in Microcracking Materials Journal of the American Ceramic Society. 70: 849-854. DOI: 10.1111/J.1151-2916.1987.Tb05639.X |
0.35 |
|
1987 |
Clarke DR, Faber KT. Fracture of ceramics and glasses Journal of Physics and Chemistry of Solids. 48: 1115-1157. DOI: 10.1016/0022-3697(87)90121-1 |
0.319 |
|
1985 |
Johnson-Walls D, Drory MD, Evans AG, Marshall DB, Faber KT. Evaluation of Reliability of Brittle Components by Thermal Stress Testing Journal of the American Ceramic Society. 68: 363-367. DOI: 10.1111/J.1151-2916.1985.Tb10143.X |
0.314 |
|
1983 |
Faber KT, Evans AG. Intergranular Crack‐Deflection Toughening in Silicon Carbide Journal of the American Ceramic Society. 66. DOI: 10.1111/J.1151-2916.1983.Tb10084.X |
0.343 |
|
1983 |
Faber KT, Evans AG. Crack deflection processes—II. Experiment Acta Metallurgica. 31: 577-584. DOI: 10.1016/0001-6160(83)90047-0 |
0.343 |
|
1983 |
Faber KT, Evans AG. Crack deflection processes—I. Theory Acta Metallurgica. 31: 565-576. DOI: 10.1016/0001-6160(83)90046-9 |
0.309 |
|
1981 |
Evans AG, Faber KT. Toughening of Ceramics by Circumferential Microcracking Journal of the American Ceramic Society. 64: 394-398. DOI: 10.1111/J.1151-2916.1981.Tb09877.X |
0.301 |
|
Show low-probability matches. |