Year |
Citation |
Score |
2020 |
Lee T, Nassiri A, Dittrich T, Vivek A, Daehn G. Microstructure development in impact welding of a model system Scripta Materialia. 178: 203-206. DOI: 10.1016/J.Scriptamat.2019.11.031 |
0.704 |
|
2020 |
Li J, Panton B, Liang S, Vivek A, Daehn G. High strength welding of NiTi and stainless steel by impact: Process, structure and properties Materials Today Communications. 25: 101306. DOI: 10.1016/J.Mtcomm.2020.101306 |
0.754 |
|
2020 |
Kapil A, Thurston B, Vivek A, Daehn G. Joining aluminum alloy to ultrahigh-strength boron steel through an impact welding approach Manufacturing Letters. 25: 30-33. DOI: 10.1016/J.Mfglet.2020.06.004 |
0.748 |
|
2020 |
Wang K, Shang S, Wang Y, Vivek A, Daehn G, Liu Z, Li J. Unveiling non-equilibrium metallurgical phases in dissimilar Al-Cu joints processed by vaporizing foil actuator welding Materials & Design. 186: 108306. DOI: 10.1016/J.Matdes.2019.108306 |
0.678 |
|
2020 |
Cheng J, Hu X, Sun X, Vivek A, Daehn G, Cullen D. Multi-scale characterization and simulation of impact welding between immiscible Mg/steel alloys Journal of Materials Science & Technology. 59: 149-163. DOI: 10.1016/J.Jmst.2020.04.049 |
0.692 |
|
2020 |
Wang H, Liu D, Lippold JC, Daehn GS. Laser impact welding for joining similar and dissimilar metal combinations with various target configurations Journal of Materials Processing Technology. 278: 116498. DOI: 10.1016/J.Jmatprotec.2019.116498 |
0.486 |
|
2020 |
Kapil A, Mao Y, Vivek A, Cooper R, Hetrick E, Daehn G. A new approach for dissimilar aluminum-steel impact spot welding using vaporizing foil actuators Journal of Manufacturing Processes. 58: 279-288. DOI: 10.1016/J.Jmapro.2020.08.015 |
0.746 |
|
2020 |
Li J, Schneiderman B, Gilbert SM, Vivek A, Yu Z, Daehn G. Process characteristics and interfacial microstructure in spot impact welding of titanium to stainless steel Journal of Manufacturing Processes. 50: 421-429. DOI: 10.1016/J.Jmapro.2019.12.036 |
0.748 |
|
2020 |
Li J, Schneiderman B, Song S, Gilbert SM, Vivek A, Yu Z, Dong P, Daehn GS. High strength welding of Ti to stainless steel by spot impact: microstructure and weld performance The International Journal of Advanced Manufacturing Technology. 108: 1447-1461. DOI: 10.1007/S00170-020-05506-4 |
0.705 |
|
2019 |
Cai W, Daehn G, Vivek A, Li J, Khan H, Mishra RS, Komarasamy M. A State-of-the-Art Review on Solid-State Metal Joining Journal of Manufacturing Science and Engineering-Transactions of the Asme. 141: 31012. DOI: 10.1115/1.4041182 |
0.606 |
|
2019 |
Nassiri A, Abke T, Daehn G. Investigation of melting phenomena in solid-state welding processes Scripta Materialia. 168: 61-66. DOI: 10.1016/J.Scriptamat.2019.04.021 |
0.504 |
|
2019 |
Sridharan N, Poplawsky J, Vivek A, Bhattacharya A, Guo W, Meyer H, Mao Y, Lee T, Daehn G. Cascading microstructures in aluminum-steel interfaces created by impact welding Materials Characterization. 151: 119-128. DOI: 10.1016/J.Matchar.2019.02.019 |
0.698 |
|
2019 |
Gupta V, Lee T, Vivek A, Choi KS, Mao Y, Sun X, Daehn G. A robust process-structure model for predicting the joint interface structure in impact welding Journal of Materials Processing Technology. 264: 107-118. DOI: 10.1016/J.Jmatprotec.2018.08.047 |
0.696 |
|
2019 |
Kapil A, Lee T, Vivek A, Cooper R, Hetrick E, Daehn G. Spot impact welding of an age-hardening aluminum alloy: Process, structure and properties Journal of Manufacturing Processes. 37: 42-52. DOI: 10.1016/J.Jmapro.2018.11.006 |
0.736 |
|
2019 |
Lee T, Zhang S, Vivek A, Daehn G, Kinsey B. Wave formation in impact welding: Study of the Cu–Ti system Cirp Annals-Manufacturing Technology. 68: 261-264. DOI: 10.1016/J.Cirp.2019.04.058 |
0.702 |
|
2018 |
Lee T, Zhang S, Vivek A, Kinsey B, Daehn G. Flyer Thickness Effect in the Impact Welding of Aluminum to Steel Journal of Manufacturing Science and Engineering-Transactions of the Asme. 140: 121002. DOI: 10.1115/1.4041247 |
0.726 |
|
2018 |
Agrawal AK, Singh A, Vivek A, Hansen S, Daehn G. Extreme twinning and hardening of 316L from a scalable impact process Materials Letters. 225: 50-53. DOI: 10.1016/J.Matlet.2018.04.044 |
0.624 |
|
2018 |
Kapil A, Lee T, Vivek A, Bockbrader J, Abke T, Daehn G. Benchmarking strength and fatigue properties of spot impact welds Journal of Materials Processing Technology. 255: 219-233. DOI: 10.1016/J.Jmatprotec.2017.12.012 |
0.717 |
|
2018 |
Lee T, Mao Y, Gerth R, Vivek A, Daehn G. Civilized explosive welding: Impact welding of thick aluminum to steel plates without explosives Journal of Manufacturing Processes. 36: 550-556. DOI: 10.1016/J.Jmapro.2018.11.005 |
0.731 |
|
2017 |
Nassiri A, Vivek A, Abke T, Liu B, Lee T, Daehn G. Depiction of interfacial morphology in impact welded Ti/Cu bimetallic systems using smoothed particle hydrodynamics Applied Physics Letters. 110: 231601. DOI: 10.1063/1.4984742 |
0.71 |
|
2017 |
Nassiri A, Zhang S, Lee T, Abke T, Vivek A, Kinsey B, Daehn G. Numerical investigation of CP-Ti & Cu110 impact welding using smoothed particle hydrodynamics and arbitrary Lagrangian-Eulerian methods ☆ Journal of Manufacturing Processes. 28: 558-564. DOI: 10.1016/J.Jmapro.2017.04.032 |
0.707 |
|
2016 |
Wang H, Vivek A, Wang Y, Taber G, Daehn GS. Laser impact welding application in joining aluminum to titanium Journal of Laser Applications. 28. DOI: 10.2351/1.4946887 |
0.745 |
|
2016 |
Chen S, Daehn GS, Vivek A, Liu B, Hansen SR, Huang J, Lin S. Interfacial microstructures and mechanical property of vaporizing foil actuator welding of aluminum alloy to steel Materials Science and Engineering A. 659: 12-21. DOI: 10.1016/J.Msea.2016.02.040 |
0.704 |
|
2016 |
Lu Y, Song H, Taber GA, Foster DR, Daehn GS, Zhang W. In-situ measurement of relative motion during ultrasonic spot welding of aluminum alloy using Photonic Doppler Velocimetry Journal of Materials Processing Technology. 231: 431-440. DOI: 10.1016/j.jmatprotec.2016.01.006 |
0.315 |
|
2016 |
Hahn M, Weddeling C, Taber G, Vivek A, Daehn GS, Tekkaya AE. Vaporizing foil actuator welding as a competing technology to magnetic pulse welding Journal of Materials Processing Technology. 230: 8-20. DOI: 10.1016/J.Jmatprotec.2015.11.010 |
0.715 |
|
2016 |
Wang H, Vivek A, Wang Y, Viswanathan G, Daehn G. High strain rate embossing with copper plate International Journal of Material Forming. 1-9. DOI: 10.1007/S12289-016-1312-9 |
0.671 |
|
2016 |
Wang H, Vivek A, Wang Y, Taber G, Daehn GS. JLA | editor's pick Lia Today. 24: 25. |
0.516 |
|
2015 |
Vivek A, Liu B, Sakkinen D, Harris M, Daehn G. Impact Welding of Aluminum Alloy 6061 to Dual Phase 780 Steel Using Vaporizing Foil Actuator Sae Technical Papers. 2015. DOI: 10.4271/2015-01-0701 |
0.746 |
|
2015 |
Hansen SR, Vivek A, Daehn GS. Impact welding of aluminum alloys 6061 and 5052 by vaporizing foil actuators: Heat-affected zone size and peel strength Journal of Manufacturing Science and Engineering, Transactions of the Asme. 137. DOI: 10.1115/1.4030934 |
0.723 |
|
2015 |
Vivek A, Presley M, Flores KM, Hutchinson NH, Daehn GS. Solid state impact welding of BMG and copper by vaporizing foil actuator welding Materials Science and Engineering A. 634: 14-19. DOI: 10.1016/J.Msea.2015.03.012 |
0.733 |
|
2015 |
Taber GA, Vivek A, Coffey J, Daehn GS. Openable electromagnetic actuator as a non-contact, agile tool for crimping operations Manufacturing Letters. 5: 21-24. DOI: 10.1016/J.Mfglet.2015.07.002 |
0.635 |
|
2015 |
Nassiri A, Chini G, Vivek A, Daehn G, Kinsey B. Arbitrary Lagrangian-Eulerian finite element simulation and experimental investigation of wavy interfacial morphology during high velocity impact welding Materials and Design. 88: 345-358. DOI: 10.1016/J.Matdes.2015.09.005 |
0.726 |
|
2015 |
Wang H, Taber G, Liu D, Hansen S, Chowdhury E, Terry S, Lippold JC, Daehn GS. Laser impact welding: Design of apparatus and parametric optimization Journal of Manufacturing Processes. 19: 118-124. DOI: 10.1016/J.Jmapro.2015.05.007 |
0.515 |
|
2015 |
Vivek A, Hansen S, Benzing J, He M, Daehn G. Impact Welding of Aluminum to Copper and Stainless Steel by Vaporizing Foil Actuator: Effect of Heat Treatment Cycles on Mechanical Properties and Microstructure Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 4548-4558. DOI: 10.1007/S11661-014-2404-0 |
0.741 |
|
2015 |
Daehn GS, Vivek A, Shang J. Electromagnetically assisted sheet metal stamping and deep drawing 60 Excellent Inventions in Metal Forming. 107-112. DOI: 10.1007/978-3-662-46312-3_17 |
0.644 |
|
2015 |
Vivek A, Taber GA, Johnson JR, Daehn GS. Vaporizing foil actuator: A tool for creating high-pressure impulses for metalworking 60 Excellent Inventions in Metal Forming. 77-82. DOI: 10.1007/978-3-662-46312-3_12 |
0.584 |
|
2015 |
Liu B, Vivek A, Daehn GS. Use of vaporizing foil actuator for impact welding of aluminum alloy sheets with steel and magnesium alloys Tms Light Metals. 2015: 463-468. DOI: 10.1007/978-3-319-48248-4_77 |
0.735 |
|
2015 |
Liu B, Vivek A, Lin W, Prothe C, Daehn GS. Solid-state dissimilar joining of Ti-Fe with Nb and Cu interlayers Welding Journal. 94: 219s-224s. |
0.681 |
|
2014 |
Vivek A, Hansen SR, Daehn GS. High strain rate metalworking with vaporizing foil actuator: control of flyer velocity by varying input energy and foil thickness. The Review of Scientific Instruments. 85: 075101. PMID 25085167 DOI: 10.1063/1.4884647 |
0.659 |
|
2014 |
Foster DR, Taber GA, Babu SS, Daehn GS. In situ velocity measurements of very high power ultrasonic additive manufacturing using a photonic Doppler velocimeter Science and Technology of Welding and Joining. 19: 157-163. DOI: 10.1179/1362171813Y.0000000175 |
0.315 |
|
2014 |
Hansen SR, Vivek A, Daehn GS. Vaporizing foil actuator: Controlling the pressure pulse for impulse metalworking Asme 2014 International Manufacturing Science and Engineering Conference, Msec 2014 Collocated With the Jsme 2014 International Conference On Materials and Processing and the 42nd North American Manufacturing Research Conference. 2. DOI: 10.1115/MSEC2014-4125 |
0.672 |
|
2014 |
Vivek A, Hansen SR, Liu BC, Daehn GS. Vaporizing foil actuator welding of AA6061 with Cu110: Effect of heat treatment cycles on mechanical properties and microstructure Asme 2014 International Manufacturing Science and Engineering Conference, Msec 2014 Collocated With the Jsme 2014 International Conference On Materials and Processing and the 42nd North American Manufacturing Research Conference. 2. DOI: 10.1115/MSEC2014-4118 |
0.703 |
|
2014 |
Boos KN, Vivek A, Hansen SR, Liu BC, Daehn GS. Solid state impact welds between dissimilar metals utilizing vaporizing foil actuators: A microstructural evaluation Microscopy and Microanalysis. 20: 1850-1851. DOI: 10.1017/S1431927614010988 |
0.683 |
|
2014 |
Vivek A, Daehn GS. Vaporizing foil actuator: A versatile tool for high energy-rate metal working Procedia Engineering. 81: 2129-2134. DOI: 10.1016/J.Proeng.2014.10.297 |
0.682 |
|
2014 |
Weddeling C, Hahn M, Daehn GS, Tekkaya AE. Uniform pressure electromagnetic actuator - An innovative tool for magnetic pulse welding Procedia Cirp. 18: 156-161. DOI: 10.1016/j.procir.2014.06.124 |
0.325 |
|
2014 |
Vivek A, Weeldeling C, Hahn M, Daehn GS, Tekkaya AE. Electrically driven plasma via vaporization of metallic conductors: A novel tool for joining tubular workpieces Procedia Cirp. 18: 62-67. DOI: 10.1016/J.Procir.2014.06.108 |
0.657 |
|
2014 |
Vivek A, DeFouw JD, Daehn GS. Dynamic compaction of titanium powder by vaporizing foil actuator assisted shearing Powder Technology. 254: 181-186. DOI: 10.1016/J.Powtec.2014.01.019 |
0.682 |
|
2014 |
Vivek A, Liu BC, Hansen SR, Daehn GS. Accessing collision welding process window for titanium/copper welds with vaporizing foil actuators and grooved targets Journal of Materials Processing Technology. 214: 1583-1589. DOI: 10.1016/J.Jmatprotec.2014.03.007 |
0.705 |
|
2014 |
Vivek A, Brune RC, Hansen SR, Daehn GS. Vaporizing foil actuator used for impulse forming and embossing of titanium and aluminum alloys Journal of Materials Processing Technology. 214: 865-875. DOI: 10.1016/J.Jmatprotec.2013.12.003 |
0.689 |
|
2013 |
Vivek A, Hansen SR, Liu BC, Daehn GS. Vaporizing foil actuator: A tool for collision welding Journal of Materials Processing Technology. 213: 2304-2311. DOI: 10.1016/J.Jmatprotec.2013.07.006 |
0.743 |
|
2013 |
Vivek A, Taber GA, Johnson JR, Woodward ST, Daehn GS. Electrically driven plasma via vaporization of metallic conductors: A tool for impulse metal working Journal of Materials Processing Technology. 213: 1311-1326. DOI: 10.1016/J.Jmatprotec.2013.02.010 |
0.671 |
|
2013 |
Iriondo E, Alcaraz JL, Daehn GS, Gutiérrez MA, Jimbert P. Shape calibration of high strength metal sheets by electromagnetic forming Journal of Manufacturing Processes. 15: 183-193. DOI: 10.1016/j.jmapro.2013.01.007 |
0.309 |
|
2012 |
Brandes MC, Kovarik L, Miller MK, Daehn GS, Mills MJ. Creep behavior and deformation mechanisms in a nanocluster strengthened ferritic steel Acta Materialia. 60: 1827-1839. DOI: 10.1016/J.Actamat.2011.11.057 |
0.374 |
|
2011 |
Vivek A, Kim KH, Daehn GS. Simulation and instrumentation of electromagnetic compression of steel tubes Journal of Materials Processing Technology. 211: 840-850. DOI: 10.1016/J.Jmatprotec.2010.08.023 |
0.646 |
|
2011 |
Woodward S, Weddeling C, Daehn G, Psyk V, Carson B, Tekkaya AE. Production of low-volume aviation components using disposable electromagnetic actuators Journal of Materials Processing Technology. 211: 886-895. DOI: 10.1016/J.Jmatprotec.2010.07.020 |
0.39 |
|
2011 |
Iriondo E, Gutiérrez MA, González B, Alcaraz JL, Daehn GS. Electromagnetic impulse calibration of high strength sheet metal structures Journal of Materials Processing Technology. 211: 909-915. DOI: 10.1016/j.jmatprotec.2010.05.013 |
0.363 |
|
2011 |
Shang J, Daehn G. Electromagnetically assisted sheet metal stamping Journal of Materials Processing Technology. 211: 868-874. DOI: 10.1016/J.Jmatprotec.2010.03.005 |
0.6 |
|
2011 |
Zhang Y, Babu SS, Prothe C, Blakely M, Kwasegroch J, Laha M, Daehn GS. Application of high velocity impact welding at varied different length scales Journal of Materials Processing Technology. 211: 944-952. DOI: 10.1016/J.Jmatprotec.2010.01.001 |
0.443 |
|
2011 |
Zhang Y, Wang H, Babu S, Lippold JC, Kwasegroch J, Laha M, Daehn GS. Collision welding of sheet metals: A practical and 'green' technology Welding Journal. 90: 46-51. |
0.44 |
|
2010 |
Zhang Y, Babu SS, Daehn GS. Interfacial ultrafine-grained structures on aluminum alloy 6061 joint and copper alloy 110 joint fabricated by magnetic pulse welding Journal of Materials Science. 45: 4645-4651. DOI: 10.1007/S10853-010-4676-0 |
0.491 |
|
2010 |
Thomas JD, Triantafyllidis N, Vivek A, Daehn GS, Bradley JR. Comparison of fully coupled modeling and experiments for electromagnetic forming processes in finitely strained solids International Journal of Fracture. 163: 67-83. DOI: 10.1007/S10704-010-9473-X |
0.65 |
|
2009 |
Johnson JR, Taber G, Vivek A, Zhang Y, Golowin S, Banik K, Fenton GK, Daehn GS. Coupling experiment and simulation in electromagnetic forming using Photon Doppler Velocimetry Steel Research International. 80: 359-365. DOI: 10.2374/Sri08Sp160 |
0.647 |
|
2009 |
Zhang Y, Daehn G, L'Eplattenier P, Babu S. Experimental study and numerical simulation on Magnetic Pulse Welding for pre-flanged AA6061-T6 and Cu101 sheets Asm Proceedings of the International Conference: Trends in Welding Research. 715-720. DOI: 10.1361/cp2008twr715 |
0.365 |
|
2009 |
Fenton G, Caipen T, Daehn G, Vogler T, Grady D. Shock-less high rate compaction of porous brittle materials Aip Conference Proceedings. 1195: 1337-1340. DOI: 10.1063/1.3295054 |
0.31 |
|
2008 |
Zhang Y, Babu SS, Zhang P, Kenik EA, Daehn GS. Microstructure characterisation of magnetic pulse welded AA6061-T6 by electron backscattered diffraction Science and Technology of Welding and Joining. 13: 467-471. DOI: 10.1179/174329308X341915 |
0.609 |
|
2008 |
Unocic KA, Mills MJ, Daehn GS. Challenges in preparing aluminum alloys for grain boundary characterization Microscopy and Microanalysis. 14: 556-557. DOI: 10.1017/S1431927608082305 |
0.347 |
|
2007 |
Jimbert P, Perez I, Eguia I, Daehn G. Straight hemming of aluminum sheet panels using the electromagnetic forming technology: First approach Key Engineering Materials. 344: 365-372. DOI: 10.4028/0-87849-437-5.365 |
0.321 |
|
2007 |
Kamal M, Daehn GS. A uniform pressure electromagnetic actuator for forming flat sheets Journal of Manufacturing Science and Engineering, Transactions of the Asme. 129: 369-379. DOI: 10.1115/1.2515481 |
0.445 |
|
2007 |
Kamal M, Shang J, Cheng V, Hatkevich S, Daehn GS. Agile manufacturing of a micro-embossed case by a two-step electromagnetic forming process Journal of Materials Processing Technology. 190: 41-50. DOI: 10.1016/J.Jmatprotec.2007.03.114 |
0.615 |
|
2007 |
Thomas JD, Seth M, Daehn GS, Bradley JR, Triantafyllidis N. Forming limits for electromagnetically expanded aluminum alloy tubes: Theory and experiment Acta Materialia. 55: 2863-2873. DOI: 10.1016/J.Actamat.2006.12.025 |
0.316 |
|
2007 |
Golowin S, Kamal M, Shang J, Portier J, Din A, Daehn GS, Bradley JR, Newman KE, Hatkevich S. Application of a uniform pressure actuator for electromagnetic processing of sheet metal Journal of Materials Engineering and Performance. 16: 455-460. DOI: 10.1007/S11665-007-9085-4 |
0.682 |
|
2006 |
Gan W, Zhang P, Wagoner RH, Daehn GS. Effect of load redistribution in transient plastic flow Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 37: 2097-2106. DOI: 10.1007/Bf02586130 |
0.443 |
|
2005 |
Unocic K, Mills M, Daehn G, Kobe P. Microstructural Analysis of 5XXX Series Aluminum Alloys for Optimal Strength and Corrosion Resistance Microscopy and Microanalysis. 11. DOI: 10.1017/S1431927605508158 |
0.385 |
|
2005 |
Seth M, Vohnout VJ, Daehn GS. Formability of steel sheet in high velocity impact Journal of Materials Processing Technology. 168: 390-400. DOI: 10.1016/j.jmatprotec.2004.08.032 |
0.39 |
|
2002 |
Vohnout VJ, Daehn GS. Effect of quasi-static prestrain and eddy currents on limit strains in electromagnetic pulse forming of two aluminum alloys Tms Annual Meeting. 19-26. |
0.327 |
|
2002 |
Turner A, Zhang P, Vohnout V, Daehn G. Spot impact welding of sheet aluminum Materials Science Forum. 396: 1573-1578. |
0.434 |
|
2000 |
Neeraj T, Holc DH, Daehn GS, Mills MJ. Phenomenological and microstructural analysis of room temperature creep in titanium alloys Acta Materialia. 48: 1225-1238. |
0.304 |
|
1994 |
Xu L, Daehn GS. Alligatoring and damage in the cold rolling of spheroidized steels Metallurgical and Materials Transactions A. 25: 589-598. DOI: 10.1007/BF02651600 |
0.304 |
|
Show low-probability matches. |