Year |
Citation |
Score |
2020 |
Polychronopoulos ND, Vlachopoulos J. The role of heating and cooling in viscous sintering of pairs of spheres and pairs of cylinders Rapid Prototyping Journal. 26: 719-726. DOI: 10.1108/Rpj-06-2019-0162 |
0.325 |
|
2018 |
Polychronopoulos ND, Vlachopoulos J. Computer Flow Simulation of Moffatt Eddies in Single Screw Extrusion International Polymer Processing. 33: 662-668. DOI: 10.3139/217.3574 |
0.337 |
|
2018 |
Polychronopoulos ND, Charlton Z, Suwanda D, Vlachopoulos J. Measurements and Comparison to Predictions of Viscosity of Heavily Filled HDPE with Natural Fibers Advances in Polymer Technology. 37: 1161-1167. DOI: 10.1002/Adv.21775 |
0.359 |
|
2017 |
Balamurugan GP, Pukadyil RN, Malayery MM, Thompson MR, Vlachopoulos J, Nielsen KE, Brandys FA. Thermal wrinkling behavior of formable decorative film laminates Journal of Plastic Film and Sheeting. 33: 8756087916663031. DOI: 10.1177/8756087916663031 |
0.321 |
|
2017 |
Boyd J, West WTJ, Wu S, Takacs ES, Vlachopoulos J, Thompson MR. Automated image analysis to characterize the melt densification stage of polymer sintering processes Polymer Testing. 60: 242-249. DOI: 10.1016/J.Polymertesting.2017.04.008 |
0.374 |
|
2016 |
Takács ES, Thompson MR, Vlachopoulos J, Dunn K, Nielsen KE, Brandys FA. Factors Affecting Gloss and Color of Decorative Pressure Sensitive Adhesive Films During Thermomechanical Deformation Polymer Engineering and Science. 56: 1357-1365. DOI: 10.1002/Pen.24369 |
0.362 |
|
2015 |
Emami M, Vlachopoulos J, Thompson MR, Maziers E. Examining the Influence of Production Scale on the Volume Expansion Behavior of Polyethylene Foams in Rotational Foam Molding Advances in Polymer Technology. 34. DOI: 10.1002/Adv.21507 |
0.35 |
|
2014 |
Goger A, Vlachopoulos J, Thompson MR. Negative pressures in modelling rotating polymer processing machinery are meaningless, but they are telling something International Polymer Processing. 29: 295-297. DOI: 10.3139/217.2706 |
0.334 |
|
2014 |
Emami M, Thompson MR, Vlachopoulos J. Experimental and numerical studies on bubble dynamics in nonpressurized foaming systems Polymer Engineering and Science. 54: 1947-1959. DOI: 10.1002/Pen.23737 |
0.388 |
|
2014 |
Emami M, Thompson MR, Vlachopoulos J. Bubble nucleation in nonpressurized polymer foaming systems Polymer Engineering and Science. 54: 1201-1210. DOI: 10.1002/Pen.23658 |
0.369 |
|
2013 |
Michelis P, Vlachopoulos J. Complete CNT disentanglement–dispersion–functionalisation in a pulsating micro-structured reactor Chemical Engineering Science. 90: 10-16. DOI: 10.1016/J.Ces.2012.12.003 |
0.385 |
|
2013 |
Emami M, Takacs E, Thompson MR, Vlachopoulos J, Maziers E. Visual Studies of Model Foam Development for Rotational Molding Processes Advances in Polymer Technology. 32. DOI: 10.1002/Adv.21323 |
0.373 |
|
2010 |
Elshereef R, Vlachopoulos J, Elkamel A. Comparison and analysis of bubble growth and foam formation models Engineering Computations. 27: 387-408. DOI: 10.1108/02644401011029943 |
0.317 |
|
2009 |
Santi CR, Hage E, Vlachopoulos J, Correa CA. Rheology and processing of HDPE/Wood flour composites International Polymer Processing. 24: 346-353. DOI: 10.3139/217.2238 |
0.378 |
|
2008 |
Hristov V, Vlachopoulos J. Effects of polymer molecular weight and filler particle size on flow behavior of wood polymer composites Polymer Composites. 29: 831-839. DOI: 10.1002/Pc.20455 |
0.772 |
|
2008 |
Takacs ES, Vlachopoulos J. Biobased, Biodegradable Polymers for Biomedical Applications: Properties and Processability Plastics Engineering. 64: 28-33. DOI: 10.1002/J.1941-9635.2008.Tb00378.X |
0.313 |
|
2007 |
Kanev D, Takacs E, Vlachopoulos J. Rheological Evaluation and Observations of Extrusion Instabilities of Biodegradable Polyesters International Polymer Processing. 22: 395-401. DOI: 10.3139/217.2053 |
0.325 |
|
2007 |
Hristov V, Vlachopoulos J. A Study of Entrance Pressure Loss in Filled Polymer Melts Applied Rheology. 17. DOI: 10.1515/Arh-2007-0019 |
0.731 |
|
2007 |
Hristov V, Vlachopoulos J. A study of viscoelasticity and extrudate distortions of wood polymer composites Rheologica Acta. 46: 773-783. DOI: 10.1007/S00397-007-0186-7 |
0.746 |
|
2007 |
Hristov V, Vlachopoulos J. Influence of coupling agents on melt flow behavior of natural fiber composites Macromolecular Materials and Engineering. 292: 608-619. DOI: 10.1002/Mame.200600459 |
0.746 |
|
2007 |
Hristov V, Vlachopoulos J. Thermoplastic silicone elastomer lubricant in extrusion of polypropylene wood flour composites Advances in Polymer Technology. 26: 100-108. DOI: 10.1002/Adv.20090 |
0.748 |
|
2006 |
Larrazabal HJ, Hrymak AN, Vlachopoulos J. Effect of the Chemical and Morphological Conditions of the Die Wall on the Extrusion of Linear Polyolefins International Polymer Processing. 21: 132-140. DOI: 10.3139/217.0067 |
0.351 |
|
2006 |
Larrazabal HJ, Hrymak AN, Vlachopoulos J. On the relationship between the work of adhesion and the critical shear stress for the onset of flow instabilities Rheologica Acta. 45: 705-715. DOI: 10.1007/S00397-005-0028-4 |
0.318 |
|
2006 |
Hristov V, Takács E, Vlachopoulos J. Surface Tearing and Wall Slip Phenomena in Extrusion of Highly Filled HDPE/Wood Flour Composites Polymer Engineering and Science. 46: 1204-1214. DOI: 10.1002/Pen.20592 |
0.763 |
|
2005 |
Torres A, Hrymak A, Vlachopoulos J, Moran D, DaFonseca Z. Fast and Efficient Simulation of 3D Creeping Flow in Ducts Using a Space-Marching Algorithm Polymer Engineering and Science. 45: 249-259. DOI: 10.1002/Pen.20267 |
0.376 |
|
2005 |
Sidiropoulos V, Vlachopoulos J. Temperature gradients in blown film bubbles Advances in Polymer Technology. 24: 83-90. DOI: 10.1002/Adv.20039 |
0.37 |
|
2004 |
D’Agostino D, Takács E, Vlachopoulos J. Foaming with polymer microspheres in rotational molding: The effect of coupling agent Journal of Cellular Plastics. 40: 61-75. DOI: 10.1177/0021955X04040279 |
0.344 |
|
2004 |
Thompson MR, Xi C, Takacs E, Tate M, Vlachopoulos J. Experiments and flow analysis of a micropelletizing die Polymer Engineering and Science. 44: 1391-1402. DOI: 10.1002/Pen.20134 |
0.422 |
|
2003 |
Sidiropoulos V, Vlachopoulos J, Nakamura T. The Aerodynamics of Blown Film Bubble Cooling Seikei-Kakou. 15: 740-744. DOI: 10.4325/Seikeikakou.15.740 |
0.648 |
|
2003 |
Greco A, Maffezzoli A, Vlachopoulos J. Simulation of heat transfer during rotational molding Advances in Polymer Technology. 22: 271-279. DOI: 10.1002/Adv.10055 |
0.344 |
|
2002 |
Sidiropoulos V, Vlachopoulos J. Numerical Simulation of Blown Film Cooling Journal of Reinforced Plastics and Composites. 21: 629-637. DOI: 10.1177/0731684402021007027 |
0.376 |
|
2002 |
Chaudhary BI, Takács E, Vlachopoulos J. Ethylene copolymers as sintering enhancers and impact modifiers for rotational molding of polyethylene Polymer Engineering and Science. 42: 1359-1369. DOI: 10.1002/Pen.11037 |
0.363 |
|
2001 |
Sidiropoulos V, Vlachopoulos J. Numerical Study of Internal Bubble Cooling (IBC) in Film Blowing International Polymer Processing. 16: 48-53. DOI: 10.3139/217.1625 |
0.404 |
|
2001 |
Chaudhary BI, Takács E, Vlachopoulos J. Processing enhancers for rotational molding of polyethylene Polymer Engineering and Science. 41: 1731-1742. DOI: 10.1002/Pen.10870 |
0.325 |
|
2001 |
Kontopoulou M, Vlachopoulos J. Melting and Densification of Thermoplastic Powders Polymer Engineering and Science. 41: 155-169. DOI: 10.1002/Pen.10718 |
0.668 |
|
2000 |
Sidiropoulos V, Vlachopoulos J. An Investigation of Venturi and Coanda Effects in Blown Film Cooling International Polymer Processing. 15: 40-45. DOI: 10.3139/217.1575 |
0.392 |
|
2000 |
Sidiropoulos V, Vlachopoulos J. The effects of dual‐orifice air‐ring design on blown film cooling Polymer Engineering and Science. 40: 1611-1618. DOI: 10.1002/Pen.11292 |
0.405 |
|
1999 |
Sidiropoulos V, Wood PE, Vlachopoulos J. The Aerodynamics of Cooling of Blown Film Bubbles Journal of Reinforced Plastics and Composites. 18: 529-538. DOI: 10.1177/073168449901800605 |
0.392 |
|
1999 |
Kontopoulou M, Vlachopoulos J. Bubble dissolution in molten polymers and its role in rotational molding Polymer Engineering and Science. 39: 1189-1198. DOI: 10.1002/Pen.11505 |
0.383 |
|
1998 |
Bellehumeur CT, Kontopoulou M, Vlachopoulos J. The role of viscoelasticity in polymer sintering Rheologica Acta. 37: 270-278. DOI: 10.1007/S003970050114 |
0.407 |
|
1998 |
Rincón AJ, Hrymak AN, Vlachopoulos J. Transient finite element analysis of generalized Newtonian coextrusion flows in complex geometries International Journal For Numerical Methods in Fluids. 28: 1159-1181. DOI: 10.1002/(Sici)1097-0363(19981130)28:8<1159::Aid-Fld761>3.0.Co;2-L |
0.388 |
|
1997 |
Kontopoulou M, Bisaria M, Vlachopoulos J. An Experimental Study of Rotational Molding of Polypropylene/Polyethylene Copolymers International Polymer Processing. 12: 165-173. DOI: 10.3139/217.970165 |
0.634 |
|
1997 |
Macgregor A, Vlachopoulos J, Vlcek J. Computer Simulation of Conventional and Barrier Screw Extruders Journal of Reinforced Plastics and Composites. 16: 1270-1280. DOI: 10.1177/073168449701601403 |
0.303 |
|
1997 |
Pokluda O, Bellehumeur CT, Vlachopoulos J. Modification of Frenkel's model for sintering Aiche Journal. 43: 3253-3256. DOI: 10.1002/Aic.690431213 |
0.669 |
|
1997 |
Zahavich ATP, Latto B, Takacs E, Vlachopoulos J. The effect of multiple extrusion passes during recycling of high density polyethylene Advances in Polymer Technology. 16: 11-24. DOI: 10.1002/(Sici)1098-2329(199721)16:1<11::Aid-Adv2>3.0.Co;2-M |
0.399 |
|
1996 |
Sidiropoulos V, Tian JJ, Vlachopoulos J. Computer simulation of film blowing Journal of Plastic Film and Sheeting. 12: 107-129. DOI: 10.1177/875608799601200204 |
0.356 |
|
1996 |
Bellehumeur CT, Bisaria MK, Vlachopoulos J. An experimental study and model assessment of polymer sintering Polymer Engineering and Science. 36: 2198-2207. DOI: 10.1002/Pen.10617 |
0.434 |
|
1995 |
Zhang W, Silvi N, Vlachopoulos J. Modelling and Experiments of Squeezing Flow of Polymer Melts International Polymer Processing. 10: 155-164. DOI: 10.3139/217.950155 |
0.422 |
|
1993 |
Torres A, Hrymak AN, Vlachopoulos J, Dooley J, Hilton BT. Boundary conditions for contract lines in coextrusion flows Rheologica Acta. 32: 513-525. DOI: 10.1007/Bf00437309 |
0.333 |
|
1992 |
Mavridis H, Bruce GD, Vancso GJ, Weatherly GC, Vlachopoulos J. Deformation patterns in the compression of polypropylene disks: Experiments and simulation Journal of Rheology. 36: 27-43. DOI: 10.1122/1.550340 |
0.34 |
|
1991 |
Song WN, Mirza FA, Vlachopoulos J. Finite element analysis of inflation of an axisymmetric sheet of finite thickness Journal of Rheology. 35: 93-111. DOI: 10.1122/1.550211 |
0.327 |
|
1991 |
Kwag C, Vlachopoulos J. An assessment of cogswell's method for measurement of extensional viscosity Polymer Engineering and Science. 31: 1015-1021. DOI: 10.1002/Pen.760311404 |
0.319 |
|
1990 |
Karagiannis A, Hrymak AN, Vlachopoulos J. Three-dimensional studies on bicomponent extrusion Rheologica Acta. 29: 71-87. DOI: 10.1007/Bf01331802 |
0.338 |
|
1990 |
Vlcek J, Mailvaganam GN, Vlachopoulos J, Perdikoulias J. Computer simulation and experiments of flow distribution in flat sheet dies Advances in Polymer Technology. 10: 309-322. DOI: 10.1002/Adv.1990.060100407 |
0.332 |
|
1990 |
Perdikoulias J, Vlcek J, Vlachopoulos J. An experimental evaluation of flow distribution models for spiral mandrel dies Advances in Polymer Technology. 10: 111-123. DOI: 10.1002/Adv.1990.060100204 |
0.407 |
|
1989 |
Tzoganakis C, Tang Y, Vlachopoulos J, Hamielec AE. Controlled Degradation of Polypropylene: A Comprehensive Experimental and Theoretical Investigation Polymer-Plastics Technology and Engineering. 28: 319-350. DOI: 10.1080/03602558908048602 |
0.391 |
|
1989 |
Karagiannis A, Hrymak AN, Vlachopoulos J. Three-dimensional non-isothermal extrusion flows Rheologica Acta. 28: 121-133. DOI: 10.1007/Bf01356973 |
0.363 |
|
1989 |
Vlcek J, Vlachopoulos J. Effect of die wall cooling or heating on extrudate swell Polymer Engineering and Science. 29: 685-689. DOI: 10.1002/Pen.760291011 |
0.346 |
|
1989 |
Tzoganakis C, Vlachopoulos J, Hamielec AE, Shinozaki DM. Effect of molecular weight distribution on the rheological and mechanical properties of polypropylene Polymer Engineering and Science. 29: 390-396. DOI: 10.1002/Pen.760290607 |
0.347 |
|
1989 |
Tang Y, Tzoganakis C, Hamielec AE, Vlachopoulos J. Peroxide crosslinking of LLDPE during reactive extrusion Advances in Polymer Technology. 9: 217-226. DOI: 10.1002/Adv.1989.060090305 |
0.332 |
|
1989 |
Vlachopoulos J, Behncke P, Vlcek J. POLYCAD: A finite element package for polymer process analysis and design Advances in Polymer Technology. 9: 147-156. DOI: 10.1002/Adv.1989.060090205 |
0.302 |
|
1988 |
Vlcek J, Vlachopoulos J, Perdikoulias J. Determination of Output Uniformity from Spiral Mandrel Dies International Polymer Processing. 2: 174-181. DOI: 10.3139/217.880174 |
0.406 |
|
1988 |
Tzoganakis C, Vlachopoulos J, Hamielec AE. Modelling of the Peroxide Degradation of Polypropylene International Polymer Processing. 3: 141-150. DOI: 10.3139/217.880141 |
0.379 |
|
1988 |
Tang Y, Tzoganakis C, Vlachopoulos J, Hamielec AE. Rheological Properties of Isotactic and Atactic Propylene-Ethylene Copolymers Journal of Elastomers and Plastics. 20: 327-345. DOI: 10.1177/009524438802000406 |
0.388 |
|
1988 |
Mavridis H, Hrymak AN, Vlachopoulos J. The Effect of Fountain Flow on Molecular Orientation in Injection Molding Journal of Rheology. 32: 639-663. DOI: 10.1122/1.549984 |
0.432 |
|
1988 |
Scott PS, Mirza F, Vlachopoulos J. Finite‐Element Simulation of Laminar Viscoplastic Flows with Regions of Recirculation Journal of Rheology. 32: 387-400. DOI: 10.1122/1.549976 |
0.377 |
|
1988 |
Karagiannis A, Mavridis H, Hrymak AN, Vlachopoulos J. Interface determination in bicomponent extrusion Polymer Engineering and Science. 28: 982-988. DOI: 10.1002/Pen.760281507 |
0.361 |
|
1988 |
Tzoganakis C, Vlachopoulos J, Hamielec AE. Production of controlled‐rheology polypropylene resins by peroxide promoted degradation during extrusion Polymer Engineering and Science. 28: 170-180. DOI: 10.1002/Pen.760280308 |
0.359 |
|
1988 |
Karagiannis A, Mavridis H, Hrymak AN, Vlachopoulos J. A finite element convergence study for shear‐thinning flow problems International Journal For Numerical Methods in Fluids. 8: 123-138. DOI: 10.1002/Fld.1650080202 |
0.339 |
|
1988 |
Mavridis H, Hrymak AN, Vlachopoulos J. Transient free‐surface flows in injection mold filling Aiche Journal. 34: 403-410. DOI: 10.1002/Aic.690340307 |
0.381 |
|
1987 |
Mavridis H, Hrymak AN, Vlachopoulos J. Finite‐element simulation of stratified multiphase flows Aiche Journal. 33: 410-422. DOI: 10.1002/Aic.690330307 |
0.39 |
|
1987 |
Perdikoulias J, Vlcek J, Vlachopoulos J. Polymer flow through spiral mandrel dies: A comparison of models Advances in Polymer Technology. 7: 333-341. DOI: 10.1002/Adv.1987.060070307 |
0.406 |
|
1987 |
Speur JA, Mavridis H, Vlachopoulos J, Janssen LPBM. Flow patterns in the calender gap of a counterrotating twin screw extruder Advances in Polymer Technology. 7: 39-48. DOI: 10.1002/Adv.1987.060070105 |
0.364 |
|
1986 |
Mavridis H, Hrymak AN, Vlachopoulos J. Deformation and Orientation of Fluid Elements Behind an Advancing Flow Front Journal of Rheology. 30: 555-563. DOI: 10.1122/1.549860 |
0.347 |
|
1986 |
Scott PS, Mirza FA, Vlachopoulos J. A finite element analysis of laminar flows through planar and axisymmetric abrupt expansions Computers & Fluids. 14: 423-432. DOI: 10.1016/0045-7930(86)90016-2 |
0.347 |
|
1986 |
Mavridis H, Hrymak AN, Vlachopoulos J. Finite element simulation of fountain flow in injection molding Polymer Engineering and Science. 26: 449-454. DOI: 10.1002/Pen.760260702 |
0.374 |
|
1986 |
Mavridis H, Hrymak AN, Vlachopoulos J. Mathematical modeling of injection mold filling: A review Advances in Polymer Technology. 6: 457-466. DOI: 10.1002/Adv.1986.060060404 |
0.376 |
|
1985 |
Mitsoulis E, Vlachopoulos J, Mirza FA. A numerical study of the effect of normal stresses and elongational viscosity on entry vortex growth and extrudate swell Polymer Engineering and Science. 25: 677-689. DOI: 10.1002/Pen.760251106 |
0.613 |
|
1985 |
Mitsoulis E, Vlachopoulos J, Mirza FA. Calendering analysis without the lubrication approximation Polymer Engineering and Science. 25: 6-18. DOI: 10.1002/Pen.760250103 |
0.615 |
|
1985 |
Mitsoulis E, Vlachopoulos J, Mirza FA. Simulation of Vortex growth in planar entry flow of a viscoelastic fluid Journal of Applied Polymer Science. 30: 1379-1391. DOI: 10.1002/App.1985.070300405 |
0.61 |
|
1985 |
Mitsoulis E, Vlachopoulos J. Effect of Reynolds number in laminar flow through a sudden planar contraction Aiche Journal. 31: 1736-1739. DOI: 10.1002/Aic.690311020 |
0.589 |
|
1985 |
Vlachopoulos J, Scott PS. Pressure drop for molten polymer flow through tapered dies Advances in Polymer Technology. 5: 81-86. DOI: 10.1002/Adv.1985.060050202 |
0.367 |
|
1984 |
Mitsoulis E, Vlachopoulos J, Mirza FA. Numerical Simulation of Entry and Exit Flows in Slit Dies Polymer Engineering and Science. 24: 707-715. DOI: 10.1002/Pen.760240913 |
0.612 |
|
1984 |
Mitsoulis E, Vlachopoulos J. Non‐isothermal creeping flow through parallel plates and a sudden planar contraction Canadian Journal of Chemical Engineering. 62: 837-844. DOI: 10.1002/Cjce.5450620615 |
0.521 |
|
1984 |
Mitsoulis E, Vlachopoulos J. The finite element method for flow and heat transfer analysis Advances in Polymer Technology. 4: 107-121. DOI: 10.1002/Adv.1984.060040203 |
0.601 |
|
1982 |
Agur EE, Vlachopoulos J. A computer model of plasticating extrusion Rheologica Acta. 21: 127-129. DOI: 10.1007/978-3-662-12809-1_32 |
0.386 |
|
1982 |
Acur EE, Vlachopoulos J. Numerical Simulation of a Single Screw Plasticating Extruder Polymer Engineering and Science. 22: 1084-1094. DOI: 10.1002/Pen.760221706 |
0.421 |
|
1981 |
Latto B, Riedy OKE, Vlachopoulos J. Effects of Sampling Rate on Concentration Measurements in Nonhomogeneous Dilute Polymer Solution Flow Journal of Rheology. 25: 583-590. DOI: 10.1122/1.549632 |
0.317 |
|
1981 |
Agur EE, Vlachopoulos J. Heat transfer to molten polymer flow in tubes Journal of Applied Polymer Science. 26: 765-773. DOI: 10.1002/App.1981.070260302 |
0.371 |
|
1980 |
Vlachopoulos J, Hrymak AN. Calendering poly(vinyl chloride): Theory and experiments Polymer Engineering and Science. 20: 725-731. DOI: 10.1002/Pen.760201105 |
0.337 |
|
1978 |
Vlachopoulos J. Die Swell and Normal Stresses: An Explanation Rubber Chemistry and Technology. 51: 133-138. DOI: 10.5254/1.3535721 |
0.375 |
|
1978 |
Kiparissides C, Vlachopoulos J. A study of viscous dissipation in the calendering of power-law fluids Polymer Engineering and Science. 18: 210-214. DOI: 10.1002/Pen.760180307 |
0.353 |
|
1977 |
Shinozaki DM, Woo K, Vlachopoulos J, Hamielec A. Influence of processing parameters and molecular weight on the mechanical properties of PVC Journal of Applied Polymer Science. 21: 3345-3354. DOI: 10.1002/App.1977.070211213 |
0.33 |
|
1976 |
Kiparissides C, Vlachopoulos J. Finite Element Analysis of Calendering Polymer Engineering and Science. 16: 712-719. DOI: 10.1002/Pen.760161010 |
0.333 |
|
1974 |
Vlachopoulos J. A numerical study of laminar magnetohydrodynamic free jets Computers & Fluids. 2: 261-271. DOI: 10.1016/0045-7930(74)90019-X |
0.334 |
|
1972 |
Vlachopoulos J, Alam M. Critcal stress and recoverable shear for polymer melt fracture Polymer Engineering and Science. 12: 184-192. DOI: 10.1002/Pen.760120305 |
0.321 |
|
1972 |
Vlachopoulos J, Keung CKJ. Heat transfer to a power‐law fluid flowing between parallel plates Aiche Journal. 18: 1272-1274. DOI: 10.1002/Aic.690180632 |
0.307 |
|
Show low-probability matches. |