Year |
Citation |
Score |
2020 |
Lijesh KP, Khonsari MM. Characterization of abrasive wear using degradation coefficient Wear. 203220. DOI: 10.1016/J.Wear.2020.203220 |
0.373 |
|
2020 |
Lijesh K, Khonsari M. Characterization of multiple wear mechanisms through entropy Tribology International. 152: 106548. DOI: 10.1016/J.Triboint.2020.106548 |
0.367 |
|
2020 |
Jang J, Khonsari M. On the wear of dynamically-loaded engine bearings with provision for misalignment and surface roughness Tribology International. 141: 105919. DOI: 10.1016/J.Triboint.2019.105919 |
0.4 |
|
2020 |
Olayinka A, Emblom WJ, Wagner SW, Khonsari M, Haghshenas A. Investigation of Deformation Induced Micro to Macro scale Surface Roughness Procedia Manufacturing. 48: 237-243. DOI: 10.1016/J.Promfg.2020.05.043 |
0.309 |
|
2020 |
Zhang B, Haghshenas A, Zhang X, Zhao J, Shao S, Khonsari M, Guo S, Meng W. On the failure mechanisms of Cr-coated 316 stainless steel in bending fatigue tests International Journal of Fatigue. 139: 105733. DOI: 10.1016/J.Ijfatigue.2020.105733 |
0.318 |
|
2020 |
Hajshirmohammadi B, Khonsari MM. On the entropy of fatigue crack propagation International Journal of Fatigue. 133: 105413. DOI: 10.1016/J.Ijfatigue.2019.105413 |
0.311 |
|
2020 |
Yang Y, Li X, Khonsari M, Zhu Y, Yang H. On enhancing surface wear resistance via rotating grains during selective laser melting Additive Manufacturing. 36: 101583. DOI: 10.1016/J.Addma.2020.101583 |
0.301 |
|
2020 |
Azizian-Farsani E, Ghodsiyeh D, Akbarzadeh S, Khonsari MM. Theoretical and experimental analysis of relation between entropy and tension–compression fatigue of aluminum 6061-T6 Journal of the Brazilian Society of Mechanical Sciences and Engineering. 42: 1-10. DOI: 10.1007/S40430-020-2194-9 |
0.392 |
|
2019 |
Lijesh K, Mehdizadeh M, Khonsari MM. Online monitoring of metal fatigue life Structural Health Monitoring. 19: 938-952. DOI: 10.1177/1475921719871668 |
0.321 |
|
2019 |
Jang J, Mehdizadeh M, Khonsari M. Nondestructive estimation of remaining fatigue life without the loading history International Journal of Damage Mechanics. 29: 482-502. DOI: 10.1177/1056789519860242 |
0.351 |
|
2019 |
Lijesh KP, Khonsari MM. Application of thermodynamic principles in determining the degradation of tribo-components subjected to oscillating motion in boundary and mixed lubrication regimes Wear. 203002. DOI: 10.1016/J.Wear.2019.203002 |
0.377 |
|
2019 |
Yang Y, Zhu Y, Khonsari MM, Yang H. Wear anisotropy of selective laser melted 316L stainless steel Wear. 376-386. DOI: 10.1016/J.Wear.2019.04.001 |
0.356 |
|
2019 |
Rezasoltani A, Khonsari M. Experimental investigation of the chemical degradation of lubricating grease from an energy point of view Tribology International. 137: 289-302. DOI: 10.1016/J.Triboint.2019.05.006 |
0.309 |
|
2019 |
Samanta P, Murmu N, Khonsari M. The evolution of foil bearing technology Tribology International. 135: 305-323. DOI: 10.1016/J.Triboint.2019.03.021 |
0.318 |
|
2019 |
Lijesh K, Khonsari M. On the degradation of tribo-components undergoing oscillating sliding contact Tribology International. 135: 18-28. DOI: 10.1016/J.Triboint.2019.02.016 |
0.406 |
|
2019 |
Lijesh K, Khonsari M. On the onset of steady state during transient adhesive wear Tribology International. 130: 378-386. DOI: 10.1016/J.Triboint.2018.10.004 |
0.373 |
|
2019 |
Jang J, Khonsari M. Performance and characterization of dynamically-loaded engine bearings with provision for misalignment Tribology International. 130: 387-399. DOI: 10.1016/J.Triboint.2018.10.003 |
0.37 |
|
2019 |
Fereidouni H, Akbarzadeh S, Khonsari M. On the assessment of variable loading in adhesive wear Tribology International. 129: 167-176. DOI: 10.1016/J.Triboint.2018.07.035 |
0.345 |
|
2019 |
Haghshenas A, Khonsari M. On the removal of extrusions and intrusions via repolishing to improve metal fatigue life Theoretical and Applied Fracture Mechanics. 103: 102248. DOI: 10.1016/J.Tafmec.2019.102248 |
0.34 |
|
2019 |
Haghshenas A, Khonsari M. Non-destructive testing and fatigue life prediction at different environmental temperatures Infrared Physics & Technology. 96: 291-297. DOI: 10.1016/J.Infrared.2018.11.020 |
0.303 |
|
2019 |
Fereidouni H, Akbarzadeh S, Khonsari MM. The Relation Between Subsurface Stresses and Useful Wear Life in Sliding Contacts Tribology Letters. 68. DOI: 10.1007/S11249-019-1246-8 |
0.357 |
|
2018 |
Dai Q, Huang W, Wang X, Khonsari MM. Ringlike Migration of a Droplet Propelled by an Omnidirectional Thermal Gradient. Langmuir : the Acs Journal of Surfaces and Colloids. PMID 29528652 DOI: 10.1021/Acs.Langmuir.7B04259 |
0.315 |
|
2018 |
Lijesh KP, Khonsari MM. On the useful life of tribo-pairs experiencing variable loading and sliding speed Wear. 103-114. DOI: 10.1016/J.Wear.2018.10.005 |
0.368 |
|
2018 |
Lijesh KP, Khonsari MM, Kailas SV. On the integrated degradation coefficient for adhesive wear: A thermodynamic approach Wear. 138-150. DOI: 10.1016/J.Wear.2018.05.004 |
0.388 |
|
2018 |
Mortazavi V, Khonsari M. Theoretical and experimental study on interdependence of wear and wetting in metallic surfaces Tribology International. 123: 61-70. DOI: 10.1016/J.Triboint.2018.02.029 |
0.423 |
|
2018 |
Meng X, khonsari M. Viscosity wedge effect of dimpled surfaces considering cavitation effect Tribology International. 122: 58-66. DOI: 10.1016/J.Triboint.2018.02.011 |
0.409 |
|
2018 |
Samanta P, Khonsari M. On the thermoelastic instability of foil bearings Tribology International. 121: 10-20. DOI: 10.1016/J.Triboint.2018.01.014 |
0.383 |
|
2018 |
Torabi A, Akbarzadeh S, Salimpour M, Khonsari M. On the running-in behavior of cam-follower mechanism Tribology International. 118: 301-313. DOI: 10.1016/J.Triboint.2017.09.034 |
0.43 |
|
2018 |
Lin Q, Bao Q, Li K, Khonsari M, Zhao H. An investigation into the transient behavior of journal bearing with surface texture based on fluid-structure interaction approach Tribology International. 118: 246-255. DOI: 10.1016/J.Triboint.2017.09.026 |
0.38 |
|
2018 |
Mehdizadeh M, Khonsari M. On the application of fracture fatigue entropy to variable frequency and loading amplitude Theoretical and Applied Fracture Mechanics. 98: 30-37. DOI: 10.1016/J.Tafmec.2018.09.005 |
0.354 |
|
2018 |
Jang J, Khonsari M. On the evaluation of fracture fatigue entropy Theoretical and Applied Fracture Mechanics. 96: 351-361. DOI: 10.1016/J.Tafmec.2018.05.013 |
0.306 |
|
2018 |
Haghshenas A, Khonsari M. Evaluation of fatigue performance of additively manufactured SS316 via internal damping Manufacturing Letters. 18: 12-15. DOI: 10.1016/J.Mfglet.2018.09.001 |
0.315 |
|
2018 |
Mehdizadeh M, Khonsari M. On the role of internal friction in low-and high-cycle fatigue International Journal of Fatigue. 114: 159-166. DOI: 10.1016/J.Ijfatigue.2018.05.007 |
0.363 |
|
2018 |
Haghshenas A, Khonsari M. Damage accumulation and crack initiation detection based on the evolution of surface roughness parameters International Journal of Fatigue. 107: 130-144. DOI: 10.1016/J.Ijfatigue.2017.10.009 |
0.354 |
|
2018 |
Lijesh KP, Khonsari MM. On the Degradation of Tribo-components in Boundary and Mixed Lubrication Regimes Tribology Letters. 67. DOI: 10.1007/S11249-018-1125-8 |
0.429 |
|
2018 |
Lijesh KP, Khonsari MM. On the Modeling of Adhesive Wear with Consideration of Loading Sequence Tribology Letters. 66. DOI: 10.1007/S11249-018-1058-2 |
0.415 |
|
2017 |
Dai Q, Khonsari MM, Shen C, Huang W, Wang X. On the migration of a droplet on an incline. Journal of Colloid and Interface Science. 494: 8-14. PMID 28131033 DOI: 10.1016/J.Jcis.2017.01.055 |
0.37 |
|
2017 |
Mo F, Shen C, Zhou J, Khonsari MM. Statistical Analysis of the Influence of Imperfect Texture Shape and Dimensional Uncertainty on Surface Texture Performance Ieee Access. 5: 27023-27035. DOI: 10.1109/Access.2017.2769880 |
0.357 |
|
2017 |
Mo F, Shen C, Zhou J, Khonsari MM. Statistical Analysis of Surface Texture Performance With Provisions With Uncertainty in Texture Dimensions Ieee Access. 5: 5388-5398. DOI: 10.1109/Access.2017.2694608 |
0.396 |
|
2017 |
Mortazavi V, Khonsari MM. On the degradation of superhydrophobic surfaces: A review Wear. 372: 145-157. DOI: 10.1016/J.Wear.2016.11.009 |
0.331 |
|
2017 |
Rezasoltani A, Khonsari M. Mechanical degradation of lubricating grease in an EHL line contact Tribology International. 109: 541-551. DOI: 10.1016/J.Triboint.2016.12.020 |
0.377 |
|
2017 |
Meng X, Khonsari M. On the effect of viscosity wedge in micro-textured parallel surfaces Tribology International. 107: 116-124. DOI: 10.1016/J.Triboint.2016.11.007 |
0.375 |
|
2017 |
Taee M, Torabi A, Akbarzadeh S, Khonsari MM, Badrossamay M. On the Performance of EHL Contacts with Textured Surfaces Tribology Letters. 65. DOI: 10.1007/S11249-017-0871-3 |
0.457 |
|
2016 |
Dai Q, Khonsari MM, Shen C, Huang W, Wang X. Thermocapillary Migration of Liquid Droplets Induced by a Unidirectional Thermal Gradient. Langmuir : the Acs Journal of Surfaces and Colloids. PMID 27400229 DOI: 10.1021/Acs.Langmuir.6B01614 |
0.374 |
|
2016 |
Kahirdeh A, Khonsari M. Acoustic Entropy of the Materials in the Course of Degradation Entropy. 18: 280. DOI: 10.3390/E18080280 |
0.325 |
|
2016 |
Mortazavi V, Khonsari MM. On the Prediction of Transient Wear Journal of Tribology. 138. DOI: 10.1115/1.4032843 |
0.412 |
|
2016 |
Aghdam AB, Khonsari MM. Application of a Thermodynamically Based Wear Estimation Methodology Journal of Tribology. 138. DOI: 10.1115/1.4032842 |
0.377 |
|
2016 |
Shen C, Khonsari MM. Texture Shape Optimization for Seal-Like Parallel Surfaces: Theory and Experiment Tribology Transactions. 59: 698-706. DOI: 10.1080/10402004.2015.1110220 |
0.35 |
|
2016 |
Li M, Khonsari MM, Lingesten N, Marklund P, McCarthy DMC, Lundin J. Model validation and uncertainty analysis in the wear prediction of a wet clutch Wear. 364: 112-121. DOI: 10.1016/J.Wear.2016.07.007 |
0.358 |
|
2016 |
Rezasoltani A, Khonsari M. An engineering model to estimate consistency reduction of lubricating grease subjected to mechanical degradation under shear Tribology International. 103: 465-474. DOI: 10.1016/J.Triboint.2016.07.012 |
0.364 |
|
2016 |
Shen C, Khonsari MM. The effect of laser machined pockets on the lubrication of piston ring prototypes Tribology International. 101: 273-283. DOI: 10.1016/J.Triboint.2016.04.009 |
0.364 |
|
2016 |
Chun SM, Khonsari MM. Wear simulation for the journal bearings operating under aligned shaft and steady load during start-up and coast-down conditions Tribology International. 97: 440-466. DOI: 10.1016/J.Triboint.2016.01.042 |
0.441 |
|
2016 |
Takabi J, Khonsari M. On the thermally-induced failure of rolling element bearings Tribology International. 94: 661-674. DOI: 10.1016/J.Triboint.2015.10.004 |
0.382 |
|
2016 |
Mortezavi V, Haghshenas A, Khonsari M, Bollen B. Fatigue analysis of metals using damping parameter International Journal of Fatigue. 91: 124-135. DOI: 10.1016/J.Ijfatigue.2016.05.011 |
0.327 |
|
2016 |
Liakat M, Khonsari M. Analysis and life prediction of a composite laminate under cyclic loading Composites Part B: Engineering. 84: 98-108. DOI: 10.1016/J.Compositesb.2015.08.015 |
0.378 |
|
2016 |
Shen C, Khonsari MM. Tribological and Sealing Performance of Laser Pocketed Piston Rings in a Diesel Engine Tribology Letters. 64. DOI: 10.1007/S11249-016-0757-9 |
0.326 |
|
2016 |
Akbarzadeh S, Khonsari MM. On the Applicability of Miner’s Rule to Adhesive Wear Tribology Letters. 63. DOI: 10.1007/S11249-016-0717-4 |
0.376 |
|
2016 |
Shen C, Khonsari MM, Spadafora M, Ludlow C. Tribological Performance of Polyamide-Imide Seal Ring Under Seawater Lubrication Tribology Letters. 62. DOI: 10.1007/S11249-016-0686-7 |
0.412 |
|
2015 |
Masjedi M, Khonsari MM. On the prediction of steady-state wear rate in spur gears Wear. 342: 234-243. DOI: 10.1016/J.Wear.2015.08.010 |
0.376 |
|
2015 |
Li M, Khonsari MM, McCarthy DMC, Lundin J. On the wear prediction of the paper-based friction materialin a wet clutch Wear. 334: 56-66. DOI: 10.1016/J.Wear.2015.04.005 |
0.398 |
|
2015 |
Takabi J, Khonsari M. On the thermally-induced seizure in bearings: A review Tribology International. 91: 118-130. DOI: 10.1016/J.Triboint.2015.05.030 |
0.303 |
|
2015 |
Masjedi M, Khonsari MM. A study on the effect of starvation in mixed elastohydrodynamic lubrication Tribology International. 85: 26-36. DOI: 10.1016/J.Triboint.2014.12.014 |
0.403 |
|
2015 |
Masjedi M, Khonsari MM. On the effect of surface roughness in point-contact EHL: Formulas for film thickness and asperity load Tribology International. 82: 228-244. DOI: 10.1016/J.Triboint.2014.09.010 |
0.412 |
|
2015 |
Kahirdeh A, Khonsari M. Energy dissipation in the course of the fatigue degradation: Mathematical derivation and experimental quantification International Journal of Solids and Structures. 77: 74-85. DOI: 10.1016/J.Ijsolstr.2015.06.032 |
0.308 |
|
2015 |
Liakat M, Khonsari M. Entropic characterization of metal fatigue with stress concentration International Journal of Fatigue. 70: 223-234. DOI: 10.1016/J.Ijfatigue.2014.09.014 |
0.361 |
|
2015 |
Mehdizadeh M, Akbarzadeh S, Shams K, Khonsari MM. Experimental Investigation on the Effect of Operating Conditions on the Running-in Behavior of Lubricated Elliptical Contacts Tribology Letters. 59. DOI: 10.1007/S11249-015-0538-X |
0.456 |
|
2014 |
Takabi J, Khonsari MM. On the Influence of Traction Coefficient on the Cage Angular Velocity in Roller Bearings Tribology Transactions. 57: 793-805. DOI: 10.1080/10402004.2014.913327 |
0.403 |
|
2014 |
Aghdam A, Khonsari M. Prediction of wear in grease-lubricated oscillatory journal bearings via energy-based approach Wear. 318: 188-201. DOI: 10.1016/J.Wear.2014.06.022 |
0.368 |
|
2014 |
Li M, Khonsari M, McCarthy D, Lundin J. Parametric analysis for a paper-based wet clutch with groove consideration Tribology International. 80: 222-233. DOI: 10.1016/J.Triboint.2014.06.023 |
0.406 |
|
2014 |
Masjedi M, Khonsari M. Erratum to “Theoretical and experimental investigation of traction coefficient in line-contact EHL of rough surfaces” [Tribol. Int. 70 (2014) 179–189] Tribology International. 74: 181. DOI: 10.1016/J.Triboint.2014.02.009 |
0.321 |
|
2014 |
Masjedi M, Khonsari MM. Theoretical and experimental investigation of traction coefficient in line-contact EHL of rough surfaces Tribology International. 70: 179-189. DOI: 10.1016/J.Triboint.2013.10.004 |
0.406 |
|
2014 |
Liakat M, Khonsari M. Rapid estimation of fatigue entropy and toughness in metals Materials & Design (1980-2015). 62: 149-157. DOI: 10.1016/J.Matdes.2014.04.086 |
0.363 |
|
2014 |
Liakat M, Khonsari M. An experimental approach to estimate damage and remaining life of metals under uniaxial fatigue loading Materials & Design. 57: 289-297. DOI: 10.1016/J.Matdes.2013.12.027 |
0.362 |
|
2014 |
Kahirdeh A, Khonsari M. Criticality of degradation in composite materials subjected to cyclic loading Composites Part B: Engineering. 61: 375-382. DOI: 10.1016/J.Compositesb.2013.06.048 |
0.304 |
|
2014 |
Rezasoltani A, Khonsari MM. On the Correlation Between Mechanical Degradation of Lubricating Grease and Entropy Tribology Letters. 56: 197-204. DOI: 10.1007/S11249-014-0399-8 |
0.331 |
|
2014 |
Aghdam AB, Beheshti A, Khonsari MM. Prediction of crack nucleation in rough line-contact fretting via continuum damage mechanics approach Tribology Letters. 53: 631-643. DOI: 10.1007/S11249-014-0300-9 |
0.341 |
|
2013 |
Beheshti A, Khonsari MM. An engineering approach for the prediction of wear in mixed lubricated contacts Wear. 308: 121-131. DOI: 10.1016/J.Wear.2013.10.004 |
0.446 |
|
2013 |
Akbarzadeh S, Khonsari M. On the optimization of running-in operating conditions in applications involving EHL line contact Wear. 303: 130-137. DOI: 10.1016/J.Wear.2013.01.098 |
0.369 |
|
2013 |
Fesanghary M, Khonsari M. On the optimum groove shapes for load-carrying capacity enhancement in parallel flat surface bearings: Theory and experiment Tribology International. 67: 254-262. DOI: 10.1016/J.Triboint.2013.08.001 |
0.374 |
|
2013 |
Takabi J, Khonsari M. Experimental testing and thermal analysis of ball bearings Tribology International. 60: 93-103. DOI: 10.1016/J.Triboint.2012.10.009 |
0.413 |
|
2013 |
Williams P, Liakat M, Khonsari M, Kabir O. A thermographic method for remaining fatigue life prediction of welded joints Materials & Design. 51: 916-923. DOI: 10.1016/J.Matdes.2013.04.094 |
0.326 |
|
2013 |
Mesgarnejad A, Bourdin B, Khonsari M. A variational approach to the fracture of brittle thin films subject to out-of-plane loading Journal of the Mechanics and Physics of Solids. 61: 2360-2379. DOI: 10.1016/J.Jmps.2013.05.001 |
0.311 |
|
2013 |
Naderi M, Hoseini S, Khonsari M. Probabilistic simulation of fatigue damage and life scatter of metallic components International Journal of Plasticity. 43: 101-115. DOI: 10.1016/J.Ijplas.2012.11.001 |
0.346 |
|
2013 |
Beheshti A, Aghdam AB, Khonsari MM. Deterministic surface tractions in rough contact under stick-slip condition: Application to fretting fatigue crack initiation International Journal of Fatigue. 56: 75-85. DOI: 10.1016/J.Ijfatigue.2013.08.007 |
0.374 |
|
2013 |
Amiri M, Khonsari MM. Effect of Surface Cooling on Fatigue Life Improvement Journal of Failure Analysis and Prevention. 13: 183-187. DOI: 10.1007/S11668-013-9652-Y |
0.361 |
|
2013 |
Shen C, Khonsari MM. Effect of Dimple’s Internal Structure on Hydrodynamic Lubrication Tribology Letters. 52: 415-430. DOI: 10.1007/S11249-013-0225-8 |
0.363 |
|
2013 |
Shen C, Khonsari MM. On the Magnitude of Cavitation Pressure of Steady-State Lubrication Tribology Letters. 51: 153-160. DOI: 10.1007/S11249-013-0158-2 |
0.348 |
|
2013 |
Aghdam AB, Khonsari MM. Prediction of Wear in Reciprocating Dry Sliding via Dissipated Energy and Temperature Rise Tribology Letters. 50: 365-378. DOI: 10.1007/S11249-013-0133-Y |
0.347 |
|
2013 |
Liakat M, Naderi M, Khonsari MM, Kabir OM. Nondestructive Testing and Prediction of Remaining Fatigue Life of Metals Journal of Nondestructive Evaluation. 33: 309-316. DOI: 10.1007/S10921-013-0214-8 |
0.355 |
|
2012 |
Kahirdeh A, Naderi M, Khonsari M. On the role of cooling on fatigue failure of a woven glass/epoxy laminate Journal of Composite Materials. 47: 1803-1815. DOI: 10.1177/0021998312451608 |
0.351 |
|
2012 |
Qiu Y, Khonsari MM. Thermohydrodynamic Analysis of Spiral Groove Mechanical Face Seal for Liquid Applications Journal of Tribology. 134. DOI: 10.1115/1.4006063 |
0.337 |
|
2012 |
Masjedi M, Khonsari MM. Film thickness and asperity load formulas for line-contact elastohydrodynamic lubrication with provision for surface roughness Journal of Tribology. 134. DOI: 10.1115/1.4005514 |
0.397 |
|
2012 |
Fesanghary M, Khonsari M. Topological and shape optimization of thrust bearings for enhanced load-carrying capacity Tribology International. 53: 12-21. DOI: 10.1016/J.Triboint.2012.03.018 |
0.332 |
|
2012 |
Beheshti A, Khonsari MM. Asperity micro-contact models as applied to the deformation of rough line contact Tribology International. 52: 61-74. DOI: 10.1016/J.Triboint.2012.02.026 |
0.352 |
|
2012 |
Xiao N, Khonsari MM. Thermal performance of mechanical seals with textured side-wall Tribology International. 45: 1-7. DOI: 10.1016/J.Triboint.2011.09.002 |
0.361 |
|
2012 |
Naderi M, Khonsari M. Thermodynamic analysis of fatigue failure in a composite laminate Mechanics of Materials. 46: 113-122. DOI: 10.1016/J.Mechmat.2011.12.003 |
0.347 |
|
2012 |
Naderi M, Kahirdeh A, Khonsari M. Dissipated thermal energy and damage evolution of Glass/Epoxy using infrared thermography and acoustic emission Composites Part B: Engineering. 43: 1613-1620. DOI: 10.1016/J.Compositesb.2011.08.002 |
0.329 |
|
2012 |
Amiri M, Khonsari MM. Nondestructive Estimation of Remaining Fatigue Life: Thermography Technique Journal of Failure Analysis and Prevention. 12: 683-688. DOI: 10.1007/S11668-012-9607-8 |
0.303 |
|
2011 |
Amiri M, Khonsari MM. On the Role of Entropy Generation in Processes Involving Fatigue Entropy. 14: 24-31. DOI: 10.3390/E14010024 |
0.301 |
|
2011 |
Qiu Y, Khonsari MM. Performance Analysis of Full-Film Textured Surfaces With Consideration of Roughness Effects Journal of Tribology. 133. DOI: 10.1115/1.4003303 |
0.41 |
|
2011 |
Jang JY, Khonsari MM, Maki R. Three-dimensional thermohydrodynamic analysis of a wet clutch with consideration of grooved friction surfaces Journal of Tribology. 133. DOI: 10.1115/1.4003019 |
0.391 |
|
2011 |
Fesanghary M, Khonsari MM. On the Shape Optimization of Self-Adaptive Grooves Tribology Transactions. 54: 256-264. DOI: 10.1080/10402004.2010.539772 |
0.325 |
|
2011 |
Aghdam A, Khonsari M. On the correlation between wear and entropy in dry sliding contact Wear. 270: 781-790. DOI: 10.1016/J.Wear.2011.01.034 |
0.352 |
|
2011 |
Beheshti A, Khonsari MM. On the prediction of fatigue crack initiation in rolling/sliding contacts with provision for loading sequence effect Tribology International. 44: 1620-1628. DOI: 10.1016/J.Triboint.2011.05.017 |
0.344 |
|
2011 |
Qiu Y, Khonsari M. Investigation of tribological behaviors of annular rings with spiral groove Tribology International. 44: 1610-1619. DOI: 10.1016/J.Triboint.2011.05.008 |
0.392 |
|
2011 |
Qiu Y, Khonsari M. Experimental investigation of tribological performance of laser textured stainless steel rings Tribology International. 44: 635-644. DOI: 10.1016/J.Triboint.2011.01.003 |
0.369 |
|
2011 |
Akbarzadeh S, Khonsari M. Experimental and theoretical investigation of running-in Tribology International. 44: 92-100. DOI: 10.1016/J.Triboint.2010.09.006 |
0.419 |
|
2010 |
Wen J, Khonsari MM, Hua DY. Three-Dimensional Heat Transfer Analysis of Pin-Bushing System With Oscillatory Motion: Theory and Experiment Journal of Tribology. 133. DOI: 10.1115/1.4002729 |
0.346 |
|
2010 |
Kahirdeh A, Khonsari MM. Condition Monitoring of Molybdenum Disulphide Coated Thrust Ball Bearings Using Time-Frequency Signal Analysis Journal of Tribology. 132. DOI: 10.1115/1.4002379 |
0.325 |
|
2010 |
Jang JY, Khonsari MM. Elastohydrodynamic line-contact of compressible shear thinning fluids with consideration of the surface roughness Journal of Tribology. 132: 1-6. DOI: 10.1115/1.4001787 |
0.371 |
|
2010 |
Akbarzadeh S, Khonsari MM. On the Prediction of Running-In Behavior in Mixed-Lubrication Line Contact Journal of Tribology. 132. DOI: 10.1115/1.4001622 |
0.442 |
|
2010 |
Jang JY, Khonsari MM. On the behavior of misaligned journal bearings based on mass-conservative thermohydrodynamic analysis Journal of Tribology. 132: 1-13. DOI: 10.1115/1.4000280 |
0.359 |
|
2010 |
Fesanghary M, Khonsari MM. On Self-Adaptive Surface Grooves Tribology Transactions. 53: 871-880. DOI: 10.1080/10402004.2010.496071 |
0.371 |
|
2010 |
Mesgarnejad A, Khonsari M. On the tribological behavior of MoS2-coated thrust ball bearings operating under oscillating motion Wear. 269: 547-556. DOI: 10.1016/J.Wear.2010.05.010 |
0.333 |
|
2010 |
Naderi M, Khonsari M. A thermodynamic approach to fatigue damage accumulation under variable loading Materials Science and Engineering: A. 527: 6133-6139. DOI: 10.1016/J.Msea.2010.05.018 |
0.341 |
|
2010 |
Amiri M, Khonsari M. Life prediction of metals undergoing fatigue load based on temperature evolution Materials Science and Engineering: A. 527: 1555-1559. DOI: 10.1016/J.Msea.2009.10.025 |
0.361 |
|
2010 |
Naderi M, Khonsari M. An experimental approach to low-cycle fatigue damage based on thermodynamic entropy International Journal of Solids and Structures. 47: 875-880. DOI: 10.1016/J.Ijsolstr.2009.12.005 |
0.334 |
|
2010 |
Amiri M, Khonsari M. Rapid determination of fatigue failure based on temperature evolution: Fully reversed bending load International Journal of Fatigue. 32: 382-389. DOI: 10.1016/J.Ijfatigue.2009.07.015 |
0.372 |
|
2010 |
Beheshti A, Khonsari MM. A thermodynamic approach for prediction of wear coefficient under unlubricated sliding condition Tribology Letters. 38: 347-354. DOI: 10.1007/S11249-010-9614-4 |
0.388 |
|
2010 |
Amiri M, Khonsari MM, Brahmeshwarkar S. On the Relationship Between Wear and Thermal Response in Sliding Systems Tribology Letters. 38: 147-154. DOI: 10.1007/S11249-010-9584-6 |
0.392 |
|
2009 |
Amiri M, Naderi M, Khonsari M. An Experimental Approach to Evaluate the Critical Damage International Journal of Damage Mechanics. 20: 89-112. DOI: 10.1177/1056789509343082 |
0.32 |
|
2009 |
Sojoudi H, Khonsari MM. On the Behavior of Friction in Lubricated Point Contact With Provision for Surface Roughness Journal of Tribology. 132. DOI: 10.1115/1.4000306 |
0.461 |
|
2009 |
Sojoudi H, Khonsari MM. On the Modeling of Quasi-Steady and Unsteady Dynamic Friction in Sliding Lubricated Line Contact Journal of Tribology. 132. DOI: 10.1115/1.4000272 |
0.408 |
|
2009 |
Qiu Y, Khonsari MM. On the Prediction of Cavitation in Dimples Using a Mass-Conservative Algorithm Journal of Tribology. 131. DOI: 10.1115/1.3176994 |
0.339 |
|
2009 |
Akbarzadeh S, Khonsari MM. Prediction of Steady State Adhesive Wear in Spur Gears Using the EHL Load Sharing Concept Journal of Tribology. 131. DOI: 10.1115/1.3075859 |
0.449 |
|
2009 |
Wen J, Khonsari MM. Thermomechanical Coupling in Oscillatory Systems With Application to Journal Bearing Seizure Journal of Tribology. 131. DOI: 10.1115/1.3071976 |
0.376 |
|
2009 |
Kumar P, Khonsari MM, Bair S. Full EHL Simulations Using the Actual Ree–Eyring Model for Shear-Thinning Lubricants Journal of Tribology-Transactions of the Asme. 131: 11802. DOI: 10.1115/1.3002328 |
0.369 |
|
2009 |
Naderi M, Amiri M, Khonsari MM. On the thermodynamic entropy of fatigue fracture Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 466: 423-438. DOI: 10.1098/Rspa.2009.0348 |
0.353 |
|
2009 |
Wen J, Khonsari MM. On the Temperature Rise of Bodies Subjected to Unidirectional or Oscillating Frictional Heating and Surface Convective Cooling Tribology Transactions. 52: 310-322. DOI: 10.1080/10402000802441629 |
0.332 |
|
2009 |
Kumar P, Khonsari M. On the role of lubricant rheology and piezo-viscous properties in line and point contact EHL Tribology International. 42: 1522-1530. DOI: 10.1016/J.Triboint.2008.11.006 |
0.382 |
|
2009 |
Luan Z, Khonsari M. Heat transfer correlations for laminar flows within a mechanical seal chamber Tribology International. 42: 770-778. DOI: 10.1016/J.Triboint.2008.10.008 |
0.338 |
|
2009 |
Wen J, Khonsari MM. Thermomechanical effects on transient temperature in non-conformal contacts experiencing reciprocating sliding motion International Journal of Heat and Mass Transfer. 52: 4390-4399. DOI: 10.1016/J.Ijheatmasstransfer.2009.03.047 |
0.367 |
|
2009 |
Krupka I, Kumar P, Bair S, Khonsari MM, Hartl M. The Effect of Load (Pressure) for Quantitative EHL Film Thickness Tribology Letters. 37: 613-622. DOI: 10.1007/S11249-009-9559-7 |
0.331 |
|
2009 |
Akbarzadeh S, Khonsari MM. Effect of Surface Pattern on Stribeck Curve Tribology Letters. 37: 477-486. DOI: 10.1007/S11249-009-9543-2 |
0.378 |
|
2008 |
Kumar P, Khonsari MM. Traction in EHL Line Contacts Using Free-Volume Pressure-Viscosity Relationship With Thermal and Shear-Thinning Effects Journal of Tribology. 131. DOI: 10.1115/1.3002331 |
0.389 |
|
2008 |
Kumar P, Khonsari MM. EHL Circular Contact Film Thickness Correction Factor for Shear-Thinning Fluids Journal of Tribology. 130. DOI: 10.1115/1.2959115 |
0.35 |
|
2008 |
Kumar P, Khonsari MM. Combined Effects of Shear Thinning and Viscous Heating on EHL Characteristics of Rolling/Sliding Line Contacts Journal of Tribology. 130. DOI: 10.1115/1.2959111 |
0.397 |
|
2008 |
Kudish II, Kumar P, Khonsari MM, Bair S. Scale Effects in Generalized Newtonian Elastohydrodynamic Films Journal of Tribology-Transactions of the Asme. 130: 41504. DOI: 10.1115/1.2959104 |
0.317 |
|
2008 |
Jang JY, Khonsari MM, Bair S. Correction Factor Formula to Predict the Central and Minimum Film Thickness for Shear-Thinning Fluids in EHL Journal of Tribology. 130. DOI: 10.1115/1.2842249 |
0.319 |
|
2008 |
Elkholy KN, Khonsari MM. Experimental Investigation on the Stick-Slip Phenomenon in Granular Collision Lubrication Journal of Tribology-Transactions of the Asme. 130: 21302. DOI: 10.1115/1.2842244 |
0.404 |
|
2008 |
Akbarzadeh S, Khonsari MM. Performance of Spur Gears Considering Surface Roughness and Shear Thinning Lubricant Journal of Tribology. 130. DOI: 10.1115/1.2805431 |
0.43 |
|
2008 |
Bryant MD, Khonsari MM, Ling FF. On the thermodynamics of degradation Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 464: 2001-2014. DOI: 10.1098/Rspa.2007.0371 |
0.34 |
|
2008 |
Jang JY, Khonsari MM. Linear squeeze film with constant rotational speed Tribology Transactions. 51: 361-371. DOI: 10.1080/10402000701852116 |
0.371 |
|
2008 |
Baek DK, Khonsari MM. Fretting behavior of a rubber coating: Effect of temperature and surface roughness variations Wear. 265: 620-625. DOI: 10.1016/J.Wear.2007.12.002 |
0.341 |
|
2008 |
Wang JK, Khonsari MM. Effects of oil inlet pressure and inlet position of axially grooved infinitely long journal bearings. Part II: Nonlinear instability analysis Tribology International. 41: 132-140. DOI: 10.1016/J.Triboint.2007.05.006 |
0.325 |
|
2008 |
Wang JK, Khonsari MM. Effects of oil inlet pressure and inlet position of axially grooved infinitely long journal bearings. Part I: Analytical solutions and static performance Tribology International. 41: 119-131. DOI: 10.1016/J.Triboint.2007.05.005 |
0.307 |
|
2008 |
Krupka I, Bair S, Kumar P, Khonsari MM, Hartl M. An Experimental Validation of the Recently Discovered Scale Effect in Generalized Newtonian EHL Tribology Letters. 33: 127-135. DOI: 10.1007/S11249-008-9397-Z |
0.323 |
|
2008 |
Kumar P, Khonsari MM. Effect of Starvation on Traction and Film Thickness in Thermo-EHL Line Contacts with Shear-Thinning Lubricants Tribology Letters. 32: 171-177. DOI: 10.1007/S11249-008-9375-5 |
0.359 |
|
2008 |
Akbarzadeh S, Khonsari MM. Thermoelastohydrodynamic Analysis of Spur Gears with Consideration of Surface Roughness Tribology Letters. 32: 129-141. DOI: 10.1007/S11249-008-9370-X |
0.424 |
|
2007 |
Elkholy KN, Khonsari MM. Granular Collision Lubrication: Experimental Investigation and Comparison to Theory Journal of Tribology-Transactions of the Asme. 129: 923-932. DOI: 10.1115/1.2768613 |
0.413 |
|
2007 |
Lu X, Khonsari MM. An Experimental Study of Grease-Lubricated Journal Bearings Undergoing Oscillatory Motion Journal of Tribology-Transactions of the Asme. 129: 640-646. DOI: 10.1115/1.2736705 |
0.344 |
|
2007 |
Wen J, Khonsari MM. Transient Temperature Involving Oscillatory Heat Source With Application in Fretting Contact Journal of Tribology. 129: 517-527. DOI: 10.1115/1.2736435 |
0.315 |
|
2007 |
Lu X, Khonsari MM. An Experimental Investigation of Grease-Lubricated Journal Bearings Journal of Tribology-Transactions of the Asme. 129: 84-90. DOI: 10.1115/1.2401216 |
0.434 |
|
2007 |
Jang JY, Khonsari MM, Bair S. On the elastohydrodynamic analysis of shear-thinning fluids Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 463: 3271-3290. DOI: 10.1098/Rspa.2007.0062 |
0.395 |
|
2007 |
Marklund P, Mäki R, Larsson R, Höglund E, Khonsari M, Jang J. Thermal influence on torque transfer of wet clutches in limited slip differential applications Tribology International. 40: 876-884. DOI: 10.1016/J.Triboint.2006.09.004 |
0.407 |
|
2007 |
Lu X, Khonsari MM. An Experimental Investigation of Dimple Effect on the Stribeck Curve of Journal Bearings Tribology Letters. 27: 169-176. DOI: 10.1007/S11249-007-9217-X |
0.4 |
|
2006 |
Lu X, Khonsari MM, Gelinck ERM. The Stribeck Curve: Experimental Results and Theoretical Prediction Journal of Tribology-Transactions of the Asme. 128: 789-794. DOI: 10.1115/1.2345406 |
0.425 |
|
2006 |
Wang JK, Khonsari MM. Bifurcation analysis of a flexible rotor supported by two fluid-film journal bearings Journal of Tribology. 128: 594-603. DOI: 10.1115/1.2197842 |
0.388 |
|
2006 |
Peng Z, Khonsari MM. A Thermohydrodynamic Analysis of Foil Journal Bearings Journal of Tribology. 128: 534-541. DOI: 10.1115/1.2197526 |
0.416 |
|
2006 |
Wang JK, Khonsari MM. Influence of Inlet Oil Temperature on the Instability Threshold of Rotor-Bearing Systems Journal of Tribology-Transactions of the Asme. 128: 319-326. DOI: 10.1115/1.2162920 |
0.317 |
|
2006 |
Wang JK, Khonsari MM. On the hysteresis phenomenon associated with instability of rotor-bearing systems Journal of Tribology. 128: 188-196. DOI: 10.1115/1.2125927 |
0.354 |
|
2006 |
Jang JY, Khonsari MM. On the role of enduring contact in powder lubrication Journal of Tribology. 128: 168-175. DOI: 10.1115/1.2114933 |
0.406 |
|
2006 |
Tudor A, Khonsari MM. Analysis of Heat Partitioning in Wheel/Rail and Wheel/Brake Shoe Friction Contact: An Analytical Approach Tribology Transactions. 49: 635-642. DOI: 10.1080/10402000600927886 |
0.351 |
|
2006 |
Baek DK, Khonsari MM. Fretting behavior of a rubber coating: Friction characteristics of rubber debris Wear. 261: 1114-1120. DOI: 10.1016/J.Wear.2006.02.005 |
0.338 |
|
2006 |
Wang JK, Khonsari MM. Application of Hopf bifurcation theory to rotor-bearing systems with consideration of turbulent effects Tribology International. 39: 701-714. DOI: 10.1016/J.Triboint.2005.07.031 |
0.347 |
|
2005 |
Mansouri M, Khonsari MM. Surface Temperature in Oscillating Sliding Interfaces Journal of Tribology. 127: 1-9. DOI: 10.1115/1.1828065 |
0.356 |
|
2005 |
Jang JY, Khonsari MM. On the granular lubrication theory Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 461: 3255-3278. DOI: 10.1098/Rspa.2005.1510 |
0.324 |
|
2005 |
Baek DK, Khonsari MM. Friction and wear of a rubber coating in fretting Wear. 258: 898-905. DOI: 10.1016/J.Wear.2004.09.075 |
0.361 |
|
2005 |
Quraishi SM, Khonsari MM, Baek DK. A thermodynamic approach for predicting fretting fatigue life Tribology Letters. 19: 169-175. DOI: 10.1007/S11249-005-6143-7 |
0.372 |
|
2004 |
Peng Z, Khonsari MM. On the Limiting Load-Carrying Capacity of Foil Bearings Journal of Tribology. 126: 817-818. DOI: 10.1115/1.1792697 |
0.32 |
|
2004 |
Peng Z, Khonsari MM. Hydrodynamic Analysis of Compliant Foil Bearings With Compressible Air Flow Journal of Tribology. 126: 542-546. DOI: 10.1115/1.1739242 |
0.408 |
|
2004 |
Iordanoff I, Khonsari MM. Granular Lubrication: Toward an Understanding of the Transition Between Kinetic and Quasi-Fluid Regime Journal of Tribology-Transactions of the Asme. 126: 137-145. DOI: 10.1115/1.1633575 |
0.301 |
|
2004 |
Jang JY, Khonsari MM. On the Growth Rate of Thermoelastic Instability Journal of Tribology. 126: 50-55. DOI: 10.1115/1.1631013 |
0.379 |
|
2004 |
Jang JY, Khonsari MM. Thermoelastic instability of two-conductor friction system including surface roughness Journal of Applied Mechanics, Transactions Asme. 71: 57-68. DOI: 10.1115/1.1629756 |
0.384 |
|
2003 |
Krithivasan R, Khonsari MM. Thermally induced seizure in journal bearings during startup and transient flow disturbance Journal of Tribology. 125: 833-841. DOI: 10.1115/1.1538619 |
0.354 |
|
2003 |
Jang JY, Khonsari MM. A generalized thermoelastic instability analysis Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 459: 309-329. DOI: 10.1098/Rspa.2002.1030 |
0.403 |
|
2002 |
Pappur M, Khonsari MM. Flow Characterization and Performance of a Powder Lubricated Slider Bearing Journal of Tribology. 125: 135-144. DOI: 10.1115/1.1467634 |
0.413 |
|
2002 |
Jang JY, Khonsari MM. On the formation of hot spots in wet clutch systems Journal of Tribology. 124: 336-345. DOI: 10.1115/1.1402132 |
0.363 |
|
2001 |
Cao DM, Feng B, Meng WJ, Rehn LE, Baldo PM, Khonsari MM. Friction and wear characteristics of ceramic nanocomposite coatings: Titanium carbide/amorphous hydrocarbon Applied Physics Letters. 79: 329-331. DOI: 10.1063/1.1384477 |
0.303 |
|
2000 |
Kamiyama S, Khonsari MM. Hydrodynamics of a Soft Contact Lens During Sliding Motion Journal of Tribology-Transactions of the Asme. 122: 573-577. DOI: 10.1115/1.555403 |
0.348 |
|
2000 |
Mansouri M, Holgerson M, Khonsari MM, Aung W. Thermal and Dynamic Characterization of Wet Clutch Engagement With Provision for Drive Torque Journal of Tribology. 123: 313-323. DOI: 10.1115/1.1329856 |
0.352 |
|
2000 |
Keogh PS, Khonsari MM. Influence of Inlet Conditions on the Thermohydrodynamic State of a Fully Circumferentially Grooved Journal Bearing Journal of Tribology. 123: 525-532. DOI: 10.1115/1.1308029 |
0.34 |
|
2000 |
Lovell MR, Deng Z, Khonsari MM. Experimental characterization of sliding friction: Crossing from deformation to plowing contact Journal of Tribology. 122: 856-863. DOI: 10.1115/1.1286217 |
0.614 |
|
1999 |
Zhou L, Khonsari MM. Flow Characteristics of a Powder Lubricant Sheared Between Parallel Plates Journal of Tribology. 122: 147-155. DOI: 10.1115/1.555337 |
0.359 |
|
1999 |
Lovell MR, Khonsari MM. On the Frictional Characteristics of Ball Bearings Coated With Solid Lubricants Journal of Tribology. 121: 761-767. DOI: 10.1115/1.2834133 |
0.604 |
|
1999 |
Jang JY, Khonsari MM. Thermoelastic Instability Including Surface Roughness Effects Journal of Tribology. 121: 648-654. DOI: 10.1115/1.2834118 |
0.389 |
|
1999 |
Jang JY, Khonsari MM. Thermal Characteristics of a Wet Clutch Journal of Tribology. 121: 610-617. DOI: 10.1115/1.2834111 |
0.36 |
|
1998 |
Jang JY, Khonsari MM, Pascovici MD. Thermohydrodynamic Seizure: Experimental and Theoretical Analysis Journal of Tribology. 120: 8-15. DOI: 10.1115/1.2834196 |
0.355 |
|
1998 |
Bair S, Khonsari MM. On the Choking of the Flow of Piezoviscous Liquids Journal of Fluids Engineering. 120: 621-625. DOI: 10.1115/1.2820709 |
0.318 |
|
1998 |
Jang JY, Khonsari MM, Pascovici MD. Modeling Aspects of a Rate-Controlled Seizure in an Unloaded Journal Bearing Tribology Transactions. 41: 481-488. DOI: 10.1080/10402009808983772 |
0.387 |
|
1998 |
Bair S, Khonsari M, Winer W. High-pressure rheology of lubricants and limitations of the Reynolds equation Tribology International. 31: 573-586. DOI: 10.1016/S0301-679X(98)00078-4 |
0.309 |
|
1997 |
Jang JY, Khonsari MM. Performance Analysis of Grease-Lubricated Journal Bearings Including Thermal Effects Journal of Tribology. 119: 859-868. DOI: 10.1115/1.2833897 |
0.37 |
|
1997 |
Lovell MR, Khonsari MM, Marangoni RD. Frictional Analysis of MoS2 Coated Ball Bearings: A Three-Dimensional Finite Element Analysis Journal of Tribology. 119: 754-763. DOI: 10.1115/1.2833881 |
0.583 |
|
1997 |
Lovell MR, Khonsari MM, Marangoni RD. Parameter Identification of Hysteresis Friction for Coated Ball Bearings Based on Three-Dimensional FEM Analysis Journal of Tribology. 119: 462-470. DOI: 10.1115/1.2833520 |
0.589 |
|
1997 |
Keogh PS, Gomiciaga R, Khonsari MM. CFD Based Design Techniques for Thermal Prediction in a Generic Two-Axial Groove Hydrodynamic Journal Bearing Journal of Tribology. 119: 428-435. DOI: 10.1115/1.2833511 |
0.365 |
|
1997 |
Khonsari M. On the modeling of multi-body interaction problems in tribology Wear. 207: 55-62. DOI: 10.1016/S0043-1648(96)07483-2 |
0.33 |
|
1996 |
Hua DY, Khonsari MM. Elastohydrodynamic Lubrication by Powder Slurries Journal of Tribology. 118: 67-73. DOI: 10.1115/1.2837094 |
0.35 |
|
1996 |
Lovell MR, Khonsari MM, Marangoni RD. Comparison of the Low-Speed Frictional Characteristics of Silicon Nitride and Steel Balls Using Conventional Lubricants Journal of Tribology. 118: 43-51. DOI: 10.1115/1.2837091 |
0.608 |
|
1996 |
Fillon M, Khonsari M. Thermohydrodynamic Design Charts for Tilting-Pad Journal Bearings Journal of Tribology-Transactions of the Asme. 118: 232-238. DOI: 10.1115/1.2837084 |
0.337 |
|
1996 |
McKeague KT, Khonsari MM. An Analysis of Powder Lubricated Slider Bearings Journal of Tribology. 118: 206-214. DOI: 10.1115/1.2837080 |
0.382 |
|
1996 |
Lovell MR, Khonsari MM, Marangoni RD. Dynamic Friction Measurements of MoS2 Coated Ball Bearing Surfaces Journal of Tribology. 118: 858-864. DOI: 10.1115/1.2831619 |
0.609 |
|
1996 |
McKeague KT, Khonsari MM. Generalized Boundary Interactions for Powder Lubricated Couette Flows Journal of Tribology. 118: 580-588. DOI: 10.1115/1.2831577 |
0.315 |
|
1996 |
Khonsari MM, Jang JY, Fillon M. On the Generalization of Thermohydrodynamic Analyses for Journal Bearings Journal of Tribology-Transactions of the Asme. 118: 571-579. DOI: 10.1115/1.2831576 |
0.354 |
|
1996 |
Bair S, Khonsari M. An EHD Inlet Zone Analysis Incorporating the Second Newtonian Journal of Tribology-Transactions of the Asme. 118: 341-343. DOI: 10.1115/1.2831306 |
0.327 |
|
1996 |
Harnoy A, Khonsari MM. Hydro-Roll: A Novel Bearing Design with Superior Thermal Characteristics Tribology Transactions. 39: 455-461. DOI: 10.1080/10402009608983552 |
0.382 |
|
1996 |
Lovell M, Khonsari M, Marangoni R. A finite element analysis of the frictional forces between a cylindrical bearing element and MoS2 coated and uncoated surfaces Wear. 194: 60-70. DOI: 10.1016/0043-1648(95)06708-6 |
0.62 |
|
1994 |
Khonsari MM, Hua DY. Thermal Elastohydrodynamic Analysis Using a Generalized Non-Newtonian Formulation With Application to Bair-Winer Constitutive Equation Journal of Tribology. 116: 37-46. DOI: 10.1115/1.2927044 |
0.344 |
|
1994 |
Dai F, Khonsari MM, Lu ZY. On the Lubrication Mechanism of Grain Flows Tribology Transactions. 37: 516-524. DOI: 10.1080/10402009408983324 |
0.351 |
|
1994 |
Lovell MR, Khonsari MM, Marangoni RD. Experimental Measurements of the Rest-Slope and Steady Torque on Ball Bearings Experiencing Small Angular Rotations Tribology Transactions. 37: 261-268. DOI: 10.1080/10402009408983291 |
0.584 |
|
1993 |
Lovell MR, Khonsari MM, Marangoni RD. The Response of Balls Undergoing Oscillatory Motion: Crossing From Boundary to Mixed Lubrication Regimes Journal of Tribology. 115: 261-266. DOI: 10.1115/1.2921000 |
0.581 |
|
1993 |
Hwang CC, Shen HQ, Zhu G, Khonsari MM. On the Main Flow Pattern in Hydrocyclones Journal of Fluids Engineering. 115: 21-25. DOI: 10.1115/1.2910106 |
0.326 |
|
1993 |
Lovell MR, Khonsari MM, Marangoni RD. Low-Speed Friction Torque on Balls Undergoing Rolling Motion Tribology Transactions. 36: 290-296. DOI: 10.1080/10402009308983161 |
0.617 |
|
1993 |
Khonsari M, Hua D. Generalized non-Newtonian elastohydrodynamic lubrication Tribology International. 26: 405-411. DOI: 10.1016/0301-679X(93)90080-K |
0.352 |
|
1992 |
Lovell MR, Khonsari MM, Marangoni RD. Evaluation of Ultra-Low-Speed Jitter in Rolling Balls Journal of Tribology. 114: 589-594. DOI: 10.1115/1.2920921 |
0.609 |
|
1992 |
Hazlett TL, Khonsari MM. Thermoelastic behaviour of journal bearings undergoing seizure Tribology International. 25: 183-187. DOI: 10.1016/0301-679X(92)90047-Q |
0.309 |
|
1992 |
Dai F, Khonsari MM. Analytical solution for a mixture of a newtonian fluid and granules in hydrodynamic bearings Wear. 156: 327-344. DOI: 10.1016/0043-1648(92)90226-X |
0.365 |
|
1991 |
Khonsari MM, Wang SH. On the maximum temperature in double-layered journal bearings Journal of Tribology-Transactions of the Asme. 113: 464-469. DOI: 10.1115/1.2920647 |
0.311 |
|
1991 |
Khonsari MM, Wang SH. On The Fluid-Solid Interaction in Reference to Thermoelastohydrodynamic Analysis of Journal Bearings Journal of Tribology-Transactions of the Asme. 113: 398-404. DOI: 10.1115/1.2920635 |
0.353 |
|
1990 |
Khonsari M, Wang S. On the role of particulate contamination in scuffing failure Wear. 137: 51-62. DOI: 10.1016/0043-1648(90)90017-5 |
0.37 |
|
1989 |
Khonsari MM, Brewe DE. On the Performance of Finite Journal Bearings Lubricated with Micropolar Fluids. Tribology Transactions. 32: 155-160. DOI: 10.1080/10402008908981874 |
0.362 |
|
1988 |
Majumdar BC, Brewe DE, Khonsari MM. Stability of a rigid rotor supported on flexible oil journal bearings Journal of Tribology-Transactions of the Asme. 110: 181-187. DOI: 10.1115/1.3261562 |
0.374 |
|
1988 |
Brewe DE, Khonsari MM. Effect of Shaft Frequency on Cavitation in a Journal Bearing for Noncentered Circular Whirl Tribology Transactions. 31: 54-60. DOI: 10.1080/10402008808981797 |
0.323 |
|
1987 |
Khonsari MM. A Review of Thermal Effects in Hydrodynamic Bearings. Part II: Journal Bearings Tribology Transactions. 30: 26-33. DOI: 10.1080/05698198708981726 |
0.317 |
|
1987 |
Khonsari MM. A Review of Thermal Effects in Hydrodynamic Bearings Part I: Slider and Thrust Bearings Tribology Transactions. 30: 19-25. DOI: 10.1080/05698198708981725 |
0.311 |
|
1986 |
Khonsari MM, Beaman JJ. Thermohydrodynamic Analysis of Laminar Incompressible Journal Bearings Tribology Transactions. 29: 141-150. DOI: 10.1080/05698198608981671 |
0.391 |
|
Low-probability matches (unlikely to be authored by this person) |
1993 |
Dai F, Khonsari MM. A Continuum Theory of a Lubrication Problem With Solid Particles Journal of Applied Mechanics. 60: 48-58. DOI: 10.1115/1.2900778 |
0.3 |
|
2012 |
Aghdam AB, Beheshti A, Khonsari MM. On the fretting crack nucleation with provision for size effect Tribology International. 47: 32-43. DOI: 10.1016/J.Triboint.2011.10.001 |
0.3 |
|
2019 |
Chaichi A, Prasad A, Kootta Parambil L, Shaik S, Hemmasian Ettefagh A, Dasa V, Guo S, Osborn ML, Devireddy R, Khonsari MM, Gartia MR. Improvement of Tribological and Biocompatibility Properties of Orthopedic Materials Using Piezoelectric Direct Discharge Plasma Surface Modification. Acs Biomaterials Science & Engineering. 5: 2147-2159. PMID 33405717 DOI: 10.1021/Acsbiomaterials.9B00009 |
0.299 |
|
2015 |
Shen C, Khonsari M. Numerical optimization of texture shape for parallel surfaces under unidirectional and bidirectional sliding Tribology International. 82: 1-11. DOI: 10.1016/J.Triboint.2014.09.022 |
0.298 |
|
2007 |
Luan Z, Khonsari MM. Computational Fluid Dynamics Analysis of Turbulent Flow Within a Mechanical Seal Chamber Journal of Tribology-Transactions of the Asme. 129: 120-128. DOI: 10.1115/1.2401220 |
0.298 |
|
2020 |
Hajshirmohammadi B, Khonsari M. Thermographic evaluation of metal crack propagation during cyclic loading Theoretical and Applied Fracture Mechanics. 105: 102385. DOI: 10.1016/J.Tafmec.2019.102385 |
0.297 |
|
2019 |
Lijesh KP, Khonsari MM. On the Assessment of Mechanical Degradation of Grease Using Entropy Generation Rate Tribology Letters. 67. DOI: 10.1007/S11249-019-1165-8 |
0.297 |
|
2013 |
Naderi M, Khonsari MM. Stochastic analysis of inter- and intra-laminar damage in notched PEEK laminates Express Polymer Letters. 7: 383-395. DOI: 10.3144/Expresspolymlett.2013.35 |
0.296 |
|
1990 |
Khonsari MM, Wang SH, Qi YL. A Theory of Thermo-Elastohydrodynamic Lubrication of Liquid-Solid Lubricated Cylinders Journal of Tribology-Transactions of the Asme. 112: 259-265. DOI: 10.1115/1.2920251 |
0.296 |
|
2018 |
Shao S, Khonsari MM, Wang J, Shamsaei N, Li N. Frequency dependent deformation reversibility during cyclic loading Materials Research Letters. 6: 390-397. DOI: 10.1080/21663831.2018.1469172 |
0.296 |
|
2006 |
Wang JK, Khonsari MM. Prediction of the stability envelope of rotor-bearing system Journal of Vibration and Acoustics, Transactions of the Asme. 128: 197-202. DOI: 10.1115/1.2159035 |
0.296 |
|
1997 |
Jang JY, Khonsari MM. Thermohydrodynamic Design Charts for Slider Bearings Journal of Tribology. 119: 733-740. DOI: 10.1115/1.2833878 |
0.294 |
|
2003 |
Gladwell GML, Khonsari MM, Ram YM. Stability Boundaries of a Conservative Gyroscopic System Journal of Applied Mechanics. 70: 561-567. DOI: 10.1115/1.1574062 |
0.292 |
|
2009 |
Luan Z, Khonsari M. Analysis of conjugate heat transfer and turbulent flow in mechanical seals Tribology International. 42: 762-769. DOI: 10.1016/J.Triboint.2008.10.011 |
0.292 |
|
1993 |
Khonsari MM, Chang YJ. Stability Boundary of Non-Linear Orbits Within Clearance Circle of Journal Bearings Journal of Vibration and Acoustics. 115: 303-307. DOI: 10.1115/1.2930349 |
0.291 |
|
1988 |
Khonsari MM. Discussion: “The Effects of Fluid Inertia Forces on the Dynamic Behavior of Short Journal Bearings in Superlaminar Flow Regime” (Hashimoto, H., Wada, S., and Sumitomo, M., 1988, ASME J. Tribol., 110, pp. 539–545) Journal of Tribology-Transactions of the Asme. 110: 546-546. DOI: 10.1115/1.3261675 |
0.29 |
|
2006 |
Luan Z, Khonsari MM. Numerical Simulations of the Flow Field Around the Rings of Mechanical Seals Journal of Tribology-Transactions of the Asme. 128: 559-565. DOI: 10.1115/1.2197845 |
0.288 |
|
2015 |
Rezasoltani A, Khonsari MM. Reply to Comment by Chung on “On the Correlation Between Mechanical Degradation of Lubricating Grease and Entropy” Tribology Letters. 60. DOI: 10.1007/S11249-015-0585-3 |
0.288 |
|
2015 |
Rezasoltani A, Khonsari MM. Erratum to: On the Correlation Between Mechanical Degradation of Lubricating Grease and Entropy Tribology Letters. 58. DOI: 10.1007/S11249-015-0479-4 |
0.286 |
|
2016 |
Rezasoltani A, Khonsari M. On Monitoring Physical and Chemical Degradation and Life Estimation Models for Lubricating Greases Lubricants. 4: 34. DOI: 10.3390/Lubricants4030034 |
0.286 |
|
1992 |
Hazlett TL, Khonsari MM. Finite element model of journal bearings undergoing rapid thermally induced seizure Tribology International. 25: 177-182. DOI: 10.1016/0301-679X(92)90046-P |
0.285 |
|
1994 |
Dai F, Khonsari MM. Generalized Reynolds Equation for Solid-Liquid Lubricated Bearings Journal of Applied Mechanics. 61: 460-466. DOI: 10.1115/1.2901467 |
0.285 |
|
2020 |
Dodaran M, Ettefagh AH, Guo SM, Khonsari MM, Meng WJ, Shamsaei N, Shao S. Effect of alloying elements on the γ’ antiphase boundary energy in Ni-base superalloys Intermetallics. 117: 106670. DOI: 10.1016/J.Intermet.2019.106670 |
0.283 |
|
1997 |
Keogh PS, Gomiciaga R, Khonsari MM. Closure to “Discussion of ‘CFD Based Design Techniques for Thermal Prediction in a Generic Two-Axial Groove Hydrodynamic Journal Bearing’” (1997, ASME J. Tribol., 119, p. 436) Journal of Tribology. 119: 436-436. DOI: 10.1115/1.2833513 |
0.283 |
|
1995 |
Pascovici MD, Khonsari MM, Jang JY. On the Modeling of a Thermomechanical Seizure Journal of Tribology. 117: 744-747. DOI: 10.1115/1.2831547 |
0.283 |
|
2018 |
Li M, Khonsari M, Yang R. Dynamics Analysis of Torsional Vibration Induced by Clutch and Gear Set in Automatic Transmission International Journal of Automotive Technology. 19: 473-488. DOI: 10.1007/S12239-018-0046-8 |
0.281 |
|
2009 |
Wen J, Khonsari MM. Transient heat conduction in rolling/sliding components by a dual reciprocity boundary element method International Journal of Heat and Mass Transfer. 52: 1600-1607. DOI: 10.1016/J.Ijheatmasstransfer.2008.07.039 |
0.28 |
|
2019 |
Shao S, Khonsari M, Guo S, Meng W, Li N. Overview: Additive Manufacturing Enabled Accelerated Design of Ni-based Alloys for Improved Fatigue Life Additive Manufacturing. 29: 100779. DOI: 10.1016/J.Addma.2019.100779 |
0.279 |
|
2019 |
Dodaran M, Khonsari M, Shao S. Critical operating stress of persistent slip bands in Cu Computational Materials Science. 165: 114-120. DOI: 10.1016/J.Commatsci.2019.04.036 |
0.279 |
|
2018 |
Dai Q, Li M, Khonsari M, Huang W, Wang X. The thermocapillary migration on rough surfaces Lubrication Science. 31: 163-170. DOI: 10.1002/Ls.1419 |
0.278 |
|
2006 |
Wang JK, Khonsari MM. A new derivation for journal bearing stiffness and damping coefficients in polar coordinates Journal of Sound and Vibration. 290: 500-507. DOI: 10.1016/J.Jsv.2005.04.019 |
0.277 |
|
1994 |
Dai F, Khonsari MM. A Theory of Hydrodynamic Lubrication Involving the Mixture of Two Fluids Journal of Applied Mechanics. 61: 634-641. DOI: 10.1115/1.2901507 |
0.276 |
|
2011 |
Naderi M, Khonsari M. A comprehensive fatigue failure criterion based on thermodynamic approach Journal of Composite Materials. 46: 437-447. DOI: 10.1177/0021998311419540 |
0.276 |
|
2014 |
Masjedi M, Khonsari MM. Mixed elastohydrodynamic lubrication line-contact formulas with different surface patterns Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 228: 849-859. DOI: 10.1177/1350650114534228 |
0.274 |
|
2020 |
Hajshirmohammadi B, Khonsari MM. A simple approach for predicting fatigue crack propagation rate based on thermography Theoretical and Applied Fracture Mechanics. 107: 102534. DOI: 10.1016/J.Tafmec.2020.102534 |
0.273 |
|
2010 |
Amiri M, Khonsari MM. On the Thermodynamics of Friction and Wear―A Review Entropy. 12: 1021-1049. DOI: 10.3390/E12051021 |
0.272 |
|
1997 |
Radakovic DJ, Khonsari MM. Heat Transfer in a Thin-Film Flow in the Presence of Squeeze and Shear Thinning: Application to Piston Rings Journal of Heat Transfer. 119: 249-257. DOI: 10.1115/1.2824217 |
0.272 |
|
1988 |
Majumdar BC, Brewe DE, Khonsari MM. Closure to “Discussion of ‘Stability of a Rigid Rotor Supported on Flexible Oil Journal Bearings’” (1988, ASME J. Tribol., 110, p. 579) Journal of Tribology-Transactions of the Asme. 110: 579-579. DOI: 10.1115/1.3261693 |
0.272 |
|
2005 |
Bair S, Khonsari MM. Generalized Reynolds equations for line contact with double-Newtonian shear-thinning Tribology Letters. 18: 513-520. DOI: 10.1007/S11249-005-3612-Y |
0.271 |
|
2016 |
Masjedi M, Khonsari M. Mixed lubrication of soft contacts: An engineering look Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 231: 263-273. DOI: 10.1177/1350650116652286 |
0.269 |
|
1994 |
Bair S, Qureshi F, Khonsari M. Adiabatic Shear Localization in a Liquid Lubricant Under Pressure Journal of Tribology-Transactions of the Asme. 116: 705-708. DOI: 10.1115/1.2927321 |
0.268 |
|
2005 |
Krithivasan R, Khonsari MM. Thermomechanical analysis of oscillatory pin-bushing performance Revue Europeenne Des Elements. 14: 255-269. DOI: 10.3166/reef.14.255-269 |
0.268 |
|
1994 |
Bair S, Qureshi F, Khonsari M. Closure to “Discussion of ‘Adiabatic Shear Localization in a Liquid Lubricant Under Pressure’” (1994, ASME J. Tribol., 116, p. 709) Journal of Tribology-Transactions of the Asme. 116: 709-709. DOI: 10.1115/1.2927323 |
0.265 |
|
2012 |
Amiri M, Khonsari MM, Brahmeshwarkar S. An Application of Dimensional Analysis to Entropy-Wear Relationship Journal of Tribology-Transactions of the Asme. 134: 11604. DOI: 10.1115/1.4003765 |
0.265 |
|
2012 |
Amiri M, Khonsari MM, Brahmeshwarkar S. Authors’ Closure to “Discussion of ‘An Application of Dimensional Analysis to Entropy-Wear Relationship,’ ” (2012, ASME J. Tribol., 134, p. 011604) Journal of Tribology. 134. DOI: 10.1115/1.4006578 |
0.264 |
|
2013 |
Naderi M, Khonsari M. On the role of damage energy in the fatigue degradation characterization of a composite laminate Composites Part B: Engineering. 45: 528-537. DOI: 10.1016/J.Compositesb.2012.07.028 |
0.264 |
|
2015 |
Masjedi M, Khonsari MM. An engineering approach for rapid evaluation of traction coefficient and wear in mixed EHL Tribology International. 92: 184-190. DOI: 10.1016/j.triboint.2015.05.013 |
0.259 |
|
1994 |
Khonsari MM. Discussion: “Angular-Compliant Hydrodynamic Bearing Performance Under Dynamic Loads” (Harnoy, A., and Rachoor, H., 1993, ASME J. Tribol., 115, pp. 342–347) Journal of Tribology-Transactions of the Asme. 116: 661-661. DOI: 10.1115/1.2928899 |
0.256 |
|
2017 |
Li M, Khonsari M, McCarthy D, Lundin J. Parametric analysis of wear factors of a wet clutch friction material with different groove patterns Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 231: 1056-1067. DOI: 10.1177/1350650116689236 |
0.256 |
|
1990 |
Khonsari MM, Wang SH. Discussion: “A Finite Volume Analysis of the Thermohydrodynamic Performance of Finite Journal Bearings” (Han, T., and Paranjpe, R. S., 1990, ASME J. Tribol., 112, pp. 557–565) Journal of Tribology-Transactions of the Asme. 112: 565-565. DOI: 10.1115/1.2924262 |
0.256 |
|
2018 |
Khonsari M. Heat-transfer augmentation techniques to improve seal life Sealing Technology. 2018: 5-9. DOI: 10.1016/S1350-4789(18)30116-8 |
0.252 |
|
2000 |
Pascovici MD, Khonsari MM. Scuffing Failure of Hydrodynamic Bearings Due to an Abrasive Contaminant Partially Penetrated in the Bearing Over-Layer Journal of Tribology. 123: 430-433. DOI: 10.1115/1.1329877 |
0.25 |
|
2010 |
Naderi M, Khonsari M. Real-time fatigue life monitoring based on thermodynamic entropy Structural Health Monitoring: An International Journal. 10: 189-197. DOI: 10.1177/1475921710373295 |
0.248 |
|
2010 |
Kumar P, Anuradha P, Khonsari MM. Some important aspects of thermal elastohydrodynamic lubrication Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 224: 2588-2598. DOI: 10.1243/09544062JMES2296 |
0.248 |
|
2015 |
Mesgarnejad A, Bourdin B, Khonsari M. Validation simulations for the variational approach to fracture Computer Methods in Applied Mechanics and Engineering. 290: 420-437. DOI: 10.1016/J.Cma.2014.10.052 |
0.247 |
|
2011 |
Fesanghary M, Khonsari MM. A Modification of the Switch Function in the Elrod Cavitation Algorithm Journal of Tribology. 133. DOI: 10.1115/1.4003484 |
0.243 |
|
2018 |
Brooks AJ, Hussey DS, Yao H, Haghshenas A, Yuan J, LaManna JM, Jacobson DL, Lowery CG, Kardjilov N, Guo S, Khonsari MM, Butler LG. Neutron interferometry detection of early crack formation caused by bending fatigue in additively manufactured SS316 dogbones Materials & Design. 140: 420-430. DOI: 10.1016/J.Matdes.2017.12.001 |
0.241 |
|
2017 |
Dankowicz H, Khonsari M. Special Issue of Applied Mechanics Reviews in Collaboration with the Journal of Tribology Applied Mechanics Reviews. 69: 60201. DOI: 10.1115/1.4038404 |
0.241 |
|
1989 |
Khonsari MM, Kim HJ. On Thermally Induced Seizure in Journal Bearings Journal of Tribology-Transactions of the Asme. 111: 661-667. DOI: 10.1115/1.3261992 |
0.24 |
|
2004 |
Cai Z, Queiroz MSd, Khonsari MM. On the active stabilization of tilting-pad journal bearings Journal of Sound and Vibration. 273: 421-428. DOI: 10.1016/J.Jsv.2003.07.024 |
0.24 |
|
2003 |
Peng Z, Khonsari MM, Pascovici MD. On the thermoelastic instability of a thin-film-lubricated sliding contact: A closed-form solution Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 217: 197-204. DOI: 10.1243/135065003765714845 |
0.234 |
|
1993 |
Ulysse P, Khonsari MM. Thermal Response of Rolling Components Under Mixed Boundary Conditions: An Analytical Approach Journal of Heat Transfer. 115: 857-865. DOI: 10.1115/1.2911380 |
0.231 |
|
2016 |
Jang JY, Khonsari MM. On the Relationship between Journal Misalignment and Web Deflection in Crankshafts Journal of Engineering For Gas Turbines and Power. 138. DOI: 10.1115/1.4033952 |
0.229 |
|
1988 |
Khonsari MM, Esfahanian V. Thermohydrodynamic Analysis of Solid-Liquid Lubricated Journal Bearings Journal of Tribology-Transactions of the Asme. 110: 367-374. DOI: 10.1115/1.3261635 |
0.228 |
|
2006 |
Khonsari MM, Booser ER. Effect of Contamination on the Performance of Hydrodynamic Bearings Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 220: 419-428. DOI: 10.1243/13506501J00705 |
0.224 |
|
1989 |
Khonsari MM, Wang SH, Qi YL. A Theory of Liquid-Solid Lubrication in Elastohydrodynamic Regime Journal of Tribology-Transactions of the Asme. 111: 440-444. DOI: 10.1115/1.3261944 |
0.222 |
|
1995 |
Khonsari MM. Discussion: “A Study of the Starting Characteristics of an Unlubricated Journal Bearing” (Sun, D. C., and Jing Xu, 1995, ASME J. Tribol., 117, pp. 216–223) Journal of Tribology-Transactions of the Asme. 117: 223-223. DOI: 10.1115/1.2831231 |
0.22 |
|
2001 |
Jang JY, Khonsari MM. On the thermohydrodynamic analysis of a Bingham fluid in slider bearings Acta Mechanica. 148: 165-185. DOI: 10.1007/BF01183676 |
0.218 |
|
1989 |
Khonsari MM, Kim HJ. Discussion: “Thermally Induced Seizures of Journal Bearings” (Dufrane, K. F., and Kannel, J. W., 1989, ASME J. Tribol., 111, pp. 288–292) Journal of Tribology-Transactions of the Asme. 111: 292-292. DOI: 10.1115/1.3261909 |
0.216 |
|
2015 |
Takabi J, Khonsari M. On the dynamic performance of roller bearings operating under low rotational speeds with consideration of surface roughness Tribology International. 86: 62-71. DOI: 10.1016/J.TRIBOINT.2015.01.011 |
0.205 |
|
1999 |
Khonsari MM, Pascovici MD, Kucinschi BV. On the Scuffing Failure of Hydrodynamic Bearings in the Presence of an Abrasive Contaminant Journal of Tribology. 121: 90-96. DOI: 10.1115/1.2833816 |
0.188 |
|
2016 |
Khonsari MM, Kennedy FE, Tichy JA, Bryant MD. Special Issue: Tribute to Frederick F. Ling 1927–2014 Journal of Tribology. 138. DOI: 10.1115/1.4032825 |
0.187 |
|
2008 |
Elkholy KN, Khonsari MM. On the effect of enduring contact on the flow and thermal characteristics in powder lubrication Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 222: 741-759. DOI: 10.1243/13506501JET409 |
0.183 |
|
1994 |
Khonsari MM, Brewe DE. Effect of viscous dissipation on the lubrication characteristics of micropolar fluids Acta Mechanica. 105: 57-68. DOI: 10.1007/BF01183942 |
0.181 |
|
2004 |
Jang JY, Khonsari MM. Design of bearings on the basis of thermohydrodynamic analysis Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 218: 355-363. DOI: 10.1243/1350650042128012 |
0.179 |
|
2020 |
Haghshenas A, Khonsari MM. On the Recovery and Fatigue Life Extension of Stainless Steel 316 Metals by Means of Recovery Heat Treatment Metals. 10: 1290. DOI: 10.3390/MET10101290 |
0.177 |
|
2018 |
Akbarzadeh A, Khonsari M. Effect of Untampered Plasma Coating and Surface Texturing on Friction and Running-in Behavior of Piston Rings Coatings. 8: 110. DOI: 10.3390/COATINGS8030110 |
0.173 |
|
2005 |
Wang JK, Khonsari MM. Influence of drag force on the dynamic performance of a rotor-bearing system Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 219: 291-295. DOI: 10.1243/135065005X33919 |
0.16 |
|
1995 |
Hua DY, Khonsari MM. Application of Transient Elastohydrodynamic Lubrication Analysis for Gear Transmissions Tribology Transactions. 38: 905-913. DOI: 10.1080/10402009508983487 |
0.158 |
|
2019 |
Wang X, Khonsari M, Li S, Dai Q, Wang X. Experimental verification of textured mechanical seal designed using multi-objective optimization Industrial Lubrication and Tribology. 71: 766-771. DOI: 10.1108/ILT-11-2018-0398 |
0.152 |
|
2015 |
Jang J, Khonsari M. On the Characteristics of Misaligned Journal Bearings Lubricants. 3: 27-53. DOI: 10.3390/LUBRICANTS3010027 |
0.15 |
|
2023 |
Amooie MA, Lijesh KP, Mahmoudi A, Azizian-Farsani E, Khonsari MM. On the Characteristics of Fatigue Fracture with Rapid Frequency Change. Entropy (Basel, Switzerland). 25. PMID 37372184 DOI: 10.3390/e25060840 |
0.146 |
|
2008 |
Luan Z, Khonsari MM. A thermohydrodynamic analysis of a lubrication film between rough seal faces Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 223: 665-673. DOI: 10.1243/13506501JET456 |
0.146 |
|
2009 |
Kumar P, Khonsari MM, Bair S. Anharmonic variations in elastohydrodynamic film thickness resulting from harmonically varying entrainment velocity Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 224: 239-247. DOI: 10.1243/13506501JET669 |
0.144 |
|
1992 |
Khonsari MM, Wang SH. Notes on Transient THD Effects in a Lubricating Film Tribology Transactions. 35: 177-183. DOI: 10.1080/10402009208982106 |
0.136 |
|
2017 |
Partzsch M, Beitelschmidt M, Khonsari MM. A method for correcting a moving heat source in analyses with coarse temporal discretization Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 232: 2736-2750. DOI: 10.1177/0954406217722807 |
0.131 |
|
2008 |
Luan Z, Khonsari MM. A note on the lubricating film in hydrostatic mechanical face seals Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 222: 559-567. DOI: 10.1243/13506501JET344 |
0.131 |
|
2018 |
Zhu Y, Lin G, Khonsari M, Zhang J, Yang H. Material characterization and lubricating behaviors of porous stainless steel fabricated by selective laser melting Journal of Materials Processing Technology. 262: 41-52. DOI: 10.1016/J.JMATPROTEC.2018.06.027 |
0.13 |
|
2011 |
Naderi M, Khonsari MM. On the Characterization of Thermal-Conductivity Degradation During Torsional Fatigue International Journal of Thermophysics. 32: 693-703. DOI: 10.1007/S10765-011-0946-6 |
0.13 |
|
2021 |
Mehdizadeh M, Haghshenas A, Khonsari M. In-situ Technique for Fatigue Life Prediction of Metals Based on Temperature Evolution International Journal of Mechanical Sciences. 192: 106113. DOI: 10.1016/J.IJMECSCI.2020.106113 |
0.129 |
|
2021 |
Aghdasi A, Khonsari M. Friction behavior of Radial Shaft Sealing Ring subjected to unsteady motion Mechanism and Machine Theory. 156: 104171. DOI: 10.1016/j.mechmachtheory.2020.104171 |
0.125 |
|
2015 |
Xiao N, Khonsari MM. Improving bearings thermal and tribological performance with built-in heat pipe Tribology Letters. 57. DOI: 10.1007/s11249-015-0466-9 |
0.122 |
|
1992 |
Khonsari MM, Dai F. On the Mixture Flow Problem in Lubrication of Hydrodynamic Bearings: Small Solid Volume Fraction Tribology Transactions. 35: 45-52. DOI: 10.1080/10402009208982087 |
0.121 |
|
2010 |
Lingerkar K, Khonsari MM. On the effects of sliding velocity and operating pressure differential in rotary O-ring seals Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 224: 649-657. DOI: 10.1243/13506501JET755 |
0.11 |
|
2021 |
Jirandehi AP, Khonsari M. Microstructure-sensitive estimation of fatigue life using cyclic thermodynamic entropy as an index for metals Theoretical and Applied Fracture Mechanics. 112: 102854. DOI: 10.1016/j.tafmec.2020.102854 |
0.098 |
|
2015 |
Liakat M, Khonsari M. On the anelasticity and fatigue fracture entropy in high-cycle metal fatigue Materials & Design. 82: 18-27. DOI: 10.1016/J.MATDES.2015.04.034 |
0.096 |
|
2007 |
Luan Z, Khonsari MM. Heat transfer analysis in mechanical seals using fin theory Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 221: 717-725. DOI: 10.1243/13506501JET285 |
0.095 |
|
2006 |
Baek DK, Khonsari MM. Temperature Analysis of a Gasket for an Internal Combustion Engine Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 220: 793-803. DOI: 10.1243/09544070JAUTO47 |
0.092 |
|
2020 |
Lijesh KP, Khonsari MM, Miller RA. Assessment of Water Contamination on Grease Using the Contact Angle Approach Tribology Letters. 68. DOI: 10.1007/s11249-020-01339-0 |
0.083 |
|
2008 |
Iordanoff I, Elkholy K, Khonsari MM. Effect of particle size dispersion on granular lubrication regimes Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 222: 725-739. DOI: 10.1243/13506501JET414 |
0.079 |
|
2002 |
Mansouri M, Khonsari MM, Holgerson MH, Aung W. Application of analysis of variance to wet clutch engagement Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 216: 117-125. DOI: 10.1243/1350650021543942 |
0.079 |
|
2017 |
Mukherjee S, Khonsari M. Brittle rotational faults and the associated shear heating Marine and Petroleum Geology. 88: 551-554. DOI: 10.1016/J.MARPETGEO.2017.09.003 |
0.073 |
|
2021 |
Dai Q, Huang W, Wang X, Khonsari M. Directional interfacial motion of liquids: Fundamentals, evaluations, and manipulation strategies Tribology International. 154: 106749. DOI: 10.1016/j.triboint.2020.106749 |
0.069 |
|
2020 |
Gurt A, Khonsari M. An Overview of Grease Water Resistance Lubricants. 8: 86. DOI: 10.3390/lubricants8090086 |
0.062 |
|
2021 |
Jirandehi AP, Khonsari M. On the determination of cyclic plastic strain energy with the provision for microplasticity International Journal of Fatigue. 142: 105966. DOI: 10.1016/J.IJFATIGUE.2020.105966 |
0.053 |
|
2018 |
Mukherjee S, Khonsari M. Inter-book normal fault-related shear heating in brittle bookshelf faults Marine and Petroleum Geology. 97: 45-48. DOI: 10.1016/J.MARPETGEO.2018.06.029 |
0.043 |
|
2019 |
Hasan SMA, Mehta N, McCarley RL, Khonsari MM, Gartia MR. Wetting translucency of graphene on plasmonic nanohole arrays 2d Materials. 7: 011004. DOI: 10.1088/2053-1583/ab5413 |
0.014 |
|
Hide low-probability matches. |