| Year |
Citation |
Score |
| 2019 |
Vunnam S, Saboo A, Sudbrack C, Starr TL. Effect of powder chemical composition on the as-built microstructure of 17-4 PH stainless steel processed by selective laser melting Additive Manufacturing. 30: 100876. DOI: 10.1016/J.Addma.2019.100876 |
0.412 |
|
| 2017 |
Dilip JJS, Miyanaji H, Lassell A, Starr TL, Stucker B. A novel method to fabricate TiAl intermetallic alloy 3D parts using additive manufacturing Defence Technology. 13: 72-76. DOI: 10.1016/J.Dt.2016.08.001 |
0.485 |
|
| 2017 |
Dilip JJS, Ram GDJ, Starr TL, Stucker B. Selective laser melting of HY100 steel: Process parameters, microstructure and mechanical properties Additive Manufacturing. 13: 49-60. DOI: 10.1016/J.Addma.2016.11.003 |
0.437 |
|
| 2015 |
Gong H, Rafi K, Gu H, Janaki Ram GD, Starr T, Stucker B. Influence of defects on mechanical properties of Ti-6Al-4V components produced by selective laser melting and electron beam melting Materials and Design. 86: 545-554. DOI: 10.1016/J.Matdes.2015.07.147 |
0.331 |
|
| 2014 |
Gong H, Rafi K, Gu H, Starr T, Stucker B. Analysis of defect generation in Ti-6Al-4V parts made using powder bed fusion additive manufacturing processes Additive Manufacturing. 1: 87-98. DOI: 10.1016/J.Addma.2014.08.002 |
0.325 |
|
| 2014 |
Rafi HK, Pal D, Patil N, Starr TL, Stucker BE. Microstructure and Mechanical Behavior of 17-4 Precipitation Hardenable Steel Processed by Selective Laser Melting Journal of Materials Engineering and Performance. 23: 4421-4428. DOI: 10.1007/S11665-014-1226-Y |
0.439 |
|
| 2013 |
Lin WS, Starr TL, Harris BT, Zandinejad A, Morton D. Additive manufacturing technology (direct metal laser sintering) as a novel approach to fabricate functionally graded titanium implants: preliminary investigation of fabrication parameters. The International Journal of Oral & Maxillofacial Implants. 28: 1490-5. PMID 24278916 DOI: 10.11607/Jomi.3164 |
0.355 |
|
| 2013 |
Spierings AB, Starr TL, Wegener K. Fatigue performance of additive manufactured metallic parts Rapid Prototyping Journal. 19: 88-94. DOI: 10.1108/13552541311302932 |
0.347 |
|
| 2013 |
Rafi HK, Karthik NV, Gong H, Starr TL, Stucker BE. Microstructures and mechanical properties of Ti6Al4V parts fabricated by selective laser melting and electron beam melting Journal of Materials Engineering and Performance. 22: 3872-3883. DOI: 10.1007/S11665-013-0658-0 |
0.395 |
|
| 2013 |
Rafi HK, Starr TL, Stucker BE. A comparison of the tensile, fatigue, and fracture behavior of Ti-6Al-4V and 15-5 PH stainless steel parts made by selective laser melting International Journal of Advanced Manufacturing Technology. 69: 1299-1309. DOI: 10.1007/S00170-013-5106-7 |
0.339 |
|
| 2011 |
Starr TL, Gornet TJ, Usher JS. The effect of process conditions on mechanical properties of laser-sintered nylon Rapid Prototyping Journal. 17: 418-423. DOI: 10.1108/13552541111184143 |
0.351 |
|
| 2008 |
Pimenova N, Starr TL. Electrochemical corrosion investigation of 49-cell combinatorial library of titanium-based alloys fabricated by DMD Journal of the Electrochemical Society. 155: C303-C306. DOI: 10.1149/1.2899021 |
0.691 |
|
| 2008 |
Varanasi VG, Besmann TM, Payzant EA, Starr TL, Anderson TJ. Thermodynamic analysis and growth of ZrO2 by chloride chemical vapor deposition Thin Solid Films. 516: 6133-6139. DOI: 10.1016/J.Tsf.2007.11.020 |
0.311 |
|
| 2006 |
Pimenova NV, Starr TL. Electrochemical and corrosion behavior of Ti-xAl-yFe alloys prepared by direct metal deposition method Electrochimica Acta. 51: 2042-2049. DOI: 10.1016/J.Electacta.2005.07.024 |
0.697 |
|
| 2005 |
Pimenova N, Starr TL. Making Combinatorial Libraries of Titanium Based Alloys by Direct Metal Deposition Technique Mrs Proceedings. 894. DOI: 10.1557/Proc-0894-Ll03-23 |
0.679 |
|
| 1999 |
Probst KJ, Besmann TM, McLaughlin JC, Anderson TJ, Starr TL. Development of a scaled-up chemical vapor infiltration system for tubular geometries Materials At High Temperatures. 16: 201-205. DOI: 10.1179/Mht.1999.020 |
0.302 |
|
| 1999 |
Probst KJ, Besmann TM, Stinton DP, Lowden RA, Anderson TJ, Starr TL. Recent advances in forced-flow, thermal-gradient CVI for refractory composites Surface and Coatings Technology. 120: 250-258. DOI: 10.1016/S0257-8972(99)00459-4 |
0.311 |
|
| 1994 |
Stinton DP, Besmann TM, Matlin WM, Starr TL, Curtain WA. Forced chemical vapor infiltration of tubular geometries: Modeling, design, and scale-up Mrs Proceedings. 365: 317. DOI: 10.1557/Proc-365-317 |
0.325 |
|
| 1994 |
Lyons JS, Starr TL. Strength and Toughness of Slip‐Cast Fused‐Silica Composites Journal of the American Ceramic Society. 77: 1673-1675. DOI: 10.1111/J.1151-2916.1994.Tb09776.X |
0.318 |
|
| 1994 |
Besmann TM, Miller JH, Cooley KM, Lowden RA, Starr TL. Chemical Vapor Infiltration of TiB2‐Matrix Composites Journal of the American Ceramic Society. 77: 2395-2400. DOI: 10.1111/J.1151-2916.1994.Tb04610.X |
0.348 |
|
| 1994 |
Kinney JH, Nichols MC, Stock SR, Starr TL, Lundgren CA. 48451 The application of X-ray tomographic microscopy to chemical vapor infiltration processing of ceramic matrix composites : 1991 Industrial Computed Tomography II, San Diego, California (United States), 20–24 May 1991. pp. 89–93. ASNT (1991) Ndt & E International. 27: 112. DOI: 10.1016/0963-8695(94)90424-3 |
0.348 |
|
| 1993 |
Kinney JH, Breunig TM, Starr TL, Haupt D, Nichols MC, Stock SR, Butts MD, Saroyan RA. X-ray Tomographic Study of Chemical Vapor Infiltration Processing of Ceramic Composites. Science (New York, N.Y.). 260: 789-92. PMID 17746112 DOI: 10.1126/Science.260.5109.789 |
0.334 |
|
| 1991 |
Butts MD, Stock SR, Kinney JH, Starr TL, Nichols MC, Lundgren CA, Breunig TM, Guvenilir A. X-Ray Tomographic Microscopy of Nicalon Preforms and Chemical Vapor Infiltrated Nicalon/Silicon Carbide Composites Mrs Proceedings. 250. DOI: 10.1557/Proc-250-215 |
0.367 |
|
| 1989 |
Besmann TM, Lowden RA, Stinton DP, Starr TL. A Method For Rapid Chemical Vapor Infiltration Of Ceramic Composites Le Journal De Physique Colloques. 50. DOI: 10.1051/Jphyscol:1989529 |
0.301 |
|
| Low-probability matches (unlikely to be authored by this person) |
| 1994 |
Kinney JH, Henry C, Haupt DL, Starr TL. The topology of percolating porosity in woven fiber ceramic matrix composites Applied Composite Materials. 1: 325-331. DOI: 10.1007/Bf00568288 |
0.297 |
|
| 1997 |
Yang F, Saxena A, Starr TL. Oxidation and Mechanical Damage in a Unidirectional SiC/Si 3 N 4 Composite at Elevated Temperature Astm Special Technical Publications. 206-224. DOI: 10.1520/Stp16325S |
0.29 |
|
| 2005 |
Starr TL, Hablutzel N. Measurement of Gas Transport through Fiber Preforms and Densified Composites for Chemical Vapor Infiltration Journal of the American Ceramic Society. 81: 1298-1304. DOI: 10.1111/J.1151-2916.1998.Tb02481.X |
0.288 |
|
| 1999 |
Jin S, Wang X, Starr TL. A model for front evolution with a nonlocal growth rate Journal of Materials Research. 14: 3829-3832. DOI: 10.1557/Jmr.1999.0515 |
0.282 |
|
| 2013 |
Usher JS, Gornet TJ, Starr TL. Weibull growth modeling of laser-sintered nylon 12 Rapid Prototyping Journal. 19: 300-306. DOI: 10.1108/13552541311323308 |
0.277 |
|
| 2017 |
Abdelrahman M, Reutzel EW, Nassar AR, Starr TL. Flaw detection in powder bed fusion using optical imaging Additive Manufacturing. 15: 1-11. DOI: 10.1016/J.Addma.2017.02.001 |
0.274 |
|
| 1998 |
Lee S, Stock SR, Butts MD, Starr TL, Breunig TM, Kinney JH. Pore geometry in woven fiber structures: 0°/90° plain-weave cloth layup preform Journal of Materials Research. 13: 1209-1217. DOI: 10.1557/Jmr.1998.0172 |
0.271 |
|
| 2019 |
Shrestha S, Starr T, Chou K. A Study of Keyhole Porosity in Selective Laser Melting: Single-Track Scanning With Micro-CT Analysis Journal of Manufacturing Science and Engineering-Transactions of the Asme. 141: 1-23. DOI: 10.1115/1.4043622 |
0.268 |
|
| 2001 |
Hemrick JG, Starr TL, Rosen DW. Release behavior for powder injection molding in stereolithography molds Rapid Prototyping Journal. 7: 115-121. DOI: 10.1108/13552540110386772 |
0.267 |
|
| 2015 |
Abdelrahman M, Starr TL. Quality certification and control of polymer laser sintering: layerwise temperature monitoring using thermal imaging International Journal of Advanced Manufacturing Technology. DOI: 10.1007/S00170-015-7524-1 |
0.256 |
|
| 1991 |
Starr TL. Advances in Modeling of the Chemical Vapor Infiltration Process Mrs Proceedings. 250: 207. DOI: 10.1557/Proc-250-207 |
0.25 |
|
| 1989 |
Starr TL, Smith AW. 3-D Modeling of Forced-Flow Thermal-Gradient CVI for Ceramic Composite Fabrication Mrs Proceedings. 168: 55. DOI: 10.1557/Proc-168-55 |
0.247 |
|
| 1995 |
Starr TL. Gas transport model for chemical vapor infiltration Journal of Materials Research. 10: 2360-2366. DOI: 10.1557/Jmr.1995.2360 |
0.237 |
|
| 1996 |
Vaidyaraman S, Lackey WJ, Agrawal PK, Starr TL. 1-D model for forced flow-thermal gradient chemical vapor infiltration process for carbon/carbon composites Carbon. 34: 1123-1133. DOI: 10.1016/0008-6223(96)00086-3 |
0.236 |
|
| 2007 |
Qiu S, Starr TL. Zirconium doping in titanium oxide photocatalytic films prepared by atomic layer deposition Journal of the Electrochemical Society. 154: H472-H475. DOI: 10.1149/1.2718475 |
0.235 |
|
| 1977 |
Williams DE, Starr TL. Calculation of the crystal structures of hydrocarbons by molecular packing analysis Computers and Chemistry. 1: 173-177. DOI: 10.1016/0097-8485(77)85007-9 |
0.189 |
|
| 2004 |
Bogdanffy M, Valentine R, Goodman D, Starr T. Response to Umeda et al. Journal of Occupational Health. 46: 249; author reply 25. PMID 15215670 DOI: 10.1539/joh.46.249 |
0.069 |
|
| 2003 |
Cole P, Trichopoulos D, Pastides H, Starr T, Mandel JS. Dioxin and cancer: a critical review. Regulatory Toxicology and Pharmacology : Rtp. 38: 378-88. PMID 14623487 DOI: 10.1016/J.Yrtph.2003.08.002 |
0.046 |
|
| 2008 |
Swenberg JA, Fryar-Tita E, Jeong YC, Boysen G, Starr T, Walker VE, Albertini RJ. Biomarkers in toxicology and risk assessment: informing critical dose-response relationships. Chemical Research in Toxicology. 21: 253-65. PMID 18161944 DOI: 10.1021/Tx700408T |
0.042 |
|
| Hide low-probability matches. |