Year |
Citation |
Score |
2020 |
Lijesh KP, Khonsari MM. Characterization of abrasive wear using degradation coefficient Wear. 203220. DOI: 10.1016/J.Wear.2020.203220 |
0.373 |
|
2020 |
Lijesh K, Khonsari M. Characterization of multiple wear mechanisms through entropy Tribology International. 152: 106548. DOI: 10.1016/J.Triboint.2020.106548 |
0.367 |
|
2020 |
Jang J, Khonsari M. On the wear of dynamically-loaded engine bearings with provision for misalignment and surface roughness Tribology International. 141: 105919. DOI: 10.1016/J.Triboint.2019.105919 |
0.4 |
|
2020 |
Olayinka A, Emblom WJ, Wagner SW, Khonsari M, Haghshenas A. Investigation of Deformation Induced Micro to Macro scale Surface Roughness Procedia Manufacturing. 48: 237-243. DOI: 10.1016/J.Promfg.2020.05.043 |
0.309 |
|
2020 |
Zhang B, Haghshenas A, Zhang X, Zhao J, Shao S, Khonsari M, Guo S, Meng W. On the failure mechanisms of Cr-coated 316 stainless steel in bending fatigue tests International Journal of Fatigue. 139: 105733. DOI: 10.1016/J.Ijfatigue.2020.105733 |
0.318 |
|
2020 |
Hajshirmohammadi B, Khonsari MM. On the entropy of fatigue crack propagation International Journal of Fatigue. 133: 105413. DOI: 10.1016/J.Ijfatigue.2019.105413 |
0.311 |
|
2020 |
Yang Y, Li X, Khonsari M, Zhu Y, Yang H. On enhancing surface wear resistance via rotating grains during selective laser melting Additive Manufacturing. 36: 101583. DOI: 10.1016/J.Addma.2020.101583 |
0.301 |
|
2020 |
Azizian-Farsani E, Ghodsiyeh D, Akbarzadeh S, Khonsari MM. Theoretical and experimental analysis of relation between entropy and tension–compression fatigue of aluminum 6061-T6 Journal of the Brazilian Society of Mechanical Sciences and Engineering. 42: 1-10. DOI: 10.1007/S40430-020-2194-9 |
0.392 |
|
2019 |
Lijesh K, Mehdizadeh M, Khonsari MM. Online monitoring of metal fatigue life Structural Health Monitoring. 19: 938-952. DOI: 10.1177/1475921719871668 |
0.321 |
|
2019 |
Jang J, Mehdizadeh M, Khonsari M. Nondestructive estimation of remaining fatigue life without the loading history International Journal of Damage Mechanics. 29: 482-502. DOI: 10.1177/1056789519860242 |
0.351 |
|
2019 |
Lijesh KP, Khonsari MM. Application of thermodynamic principles in determining the degradation of tribo-components subjected to oscillating motion in boundary and mixed lubrication regimes Wear. 203002. DOI: 10.1016/J.Wear.2019.203002 |
0.377 |
|
2019 |
Yang Y, Zhu Y, Khonsari MM, Yang H. Wear anisotropy of selective laser melted 316L stainless steel Wear. 376-386. DOI: 10.1016/J.Wear.2019.04.001 |
0.356 |
|
2019 |
Rezasoltani A, Khonsari M. Experimental investigation of the chemical degradation of lubricating grease from an energy point of view Tribology International. 137: 289-302. DOI: 10.1016/J.Triboint.2019.05.006 |
0.309 |
|
2019 |
Samanta P, Murmu N, Khonsari M. The evolution of foil bearing technology Tribology International. 135: 305-323. DOI: 10.1016/J.Triboint.2019.03.021 |
0.318 |
|
2019 |
Lijesh K, Khonsari M. On the degradation of tribo-components undergoing oscillating sliding contact Tribology International. 135: 18-28. DOI: 10.1016/J.Triboint.2019.02.016 |
0.406 |
|
2019 |
Lijesh K, Khonsari M. On the onset of steady state during transient adhesive wear Tribology International. 130: 378-386. DOI: 10.1016/J.Triboint.2018.10.004 |
0.373 |
|
2019 |
Jang J, Khonsari M. Performance and characterization of dynamically-loaded engine bearings with provision for misalignment Tribology International. 130: 387-399. DOI: 10.1016/J.Triboint.2018.10.003 |
0.37 |
|
2019 |
Fereidouni H, Akbarzadeh S, Khonsari M. On the assessment of variable loading in adhesive wear Tribology International. 129: 167-176. DOI: 10.1016/J.Triboint.2018.07.035 |
0.345 |
|
2019 |
Haghshenas A, Khonsari M. On the removal of extrusions and intrusions via repolishing to improve metal fatigue life Theoretical and Applied Fracture Mechanics. 103: 102248. DOI: 10.1016/J.Tafmec.2019.102248 |
0.34 |
|
2019 |
Haghshenas A, Khonsari M. Non-destructive testing and fatigue life prediction at different environmental temperatures Infrared Physics & Technology. 96: 291-297. DOI: 10.1016/J.Infrared.2018.11.020 |
0.303 |
|
2019 |
Fereidouni H, Akbarzadeh S, Khonsari MM. The Relation Between Subsurface Stresses and Useful Wear Life in Sliding Contacts Tribology Letters. 68. DOI: 10.1007/S11249-019-1246-8 |
0.357 |
|
2018 |
Dai Q, Huang W, Wang X, Khonsari MM. Ringlike Migration of a Droplet Propelled by an Omnidirectional Thermal Gradient. Langmuir : the Acs Journal of Surfaces and Colloids. PMID 29528652 DOI: 10.1021/Acs.Langmuir.7B04259 |
0.315 |
|
2018 |
Lijesh KP, Khonsari MM. On the useful life of tribo-pairs experiencing variable loading and sliding speed Wear. 103-114. DOI: 10.1016/J.Wear.2018.10.005 |
0.368 |
|
2018 |
Lijesh KP, Khonsari MM, Kailas SV. On the integrated degradation coefficient for adhesive wear: A thermodynamic approach Wear. 138-150. DOI: 10.1016/J.Wear.2018.05.004 |
0.388 |
|
2018 |
Mortazavi V, Khonsari M. Theoretical and experimental study on interdependence of wear and wetting in metallic surfaces Tribology International. 123: 61-70. DOI: 10.1016/J.Triboint.2018.02.029 |
0.423 |
|
2018 |
Meng X, khonsari M. Viscosity wedge effect of dimpled surfaces considering cavitation effect Tribology International. 122: 58-66. DOI: 10.1016/J.Triboint.2018.02.011 |
0.409 |
|
2018 |
Samanta P, Khonsari M. On the thermoelastic instability of foil bearings Tribology International. 121: 10-20. DOI: 10.1016/J.Triboint.2018.01.014 |
0.383 |
|
2018 |
Torabi A, Akbarzadeh S, Salimpour M, Khonsari M. On the running-in behavior of cam-follower mechanism Tribology International. 118: 301-313. DOI: 10.1016/J.Triboint.2017.09.034 |
0.43 |
|
2018 |
Lin Q, Bao Q, Li K, Khonsari M, Zhao H. An investigation into the transient behavior of journal bearing with surface texture based on fluid-structure interaction approach Tribology International. 118: 246-255. DOI: 10.1016/J.Triboint.2017.09.026 |
0.38 |
|
2018 |
Mehdizadeh M, Khonsari M. On the application of fracture fatigue entropy to variable frequency and loading amplitude Theoretical and Applied Fracture Mechanics. 98: 30-37. DOI: 10.1016/J.Tafmec.2018.09.005 |
0.354 |
|
2018 |
Jang J, Khonsari M. On the evaluation of fracture fatigue entropy Theoretical and Applied Fracture Mechanics. 96: 351-361. DOI: 10.1016/J.Tafmec.2018.05.013 |
0.306 |
|
2018 |
Haghshenas A, Khonsari M. Evaluation of fatigue performance of additively manufactured SS316 via internal damping Manufacturing Letters. 18: 12-15. DOI: 10.1016/J.Mfglet.2018.09.001 |
0.315 |
|
2018 |
Mehdizadeh M, Khonsari M. On the role of internal friction in low-and high-cycle fatigue International Journal of Fatigue. 114: 159-166. DOI: 10.1016/J.Ijfatigue.2018.05.007 |
0.363 |
|
2018 |
Haghshenas A, Khonsari M. Damage accumulation and crack initiation detection based on the evolution of surface roughness parameters International Journal of Fatigue. 107: 130-144. DOI: 10.1016/J.Ijfatigue.2017.10.009 |
0.354 |
|
2018 |
Lijesh KP, Khonsari MM. On the Degradation of Tribo-components in Boundary and Mixed Lubrication Regimes Tribology Letters. 67. DOI: 10.1007/S11249-018-1125-8 |
0.429 |
|
2018 |
Lijesh KP, Khonsari MM. On the Modeling of Adhesive Wear with Consideration of Loading Sequence Tribology Letters. 66. DOI: 10.1007/S11249-018-1058-2 |
0.415 |
|
2017 |
Dai Q, Khonsari MM, Shen C, Huang W, Wang X. On the migration of a droplet on an incline. Journal of Colloid and Interface Science. 494: 8-14. PMID 28131033 DOI: 10.1016/J.Jcis.2017.01.055 |
0.37 |
|
2017 |
Mo F, Shen C, Zhou J, Khonsari MM. Statistical Analysis of the Influence of Imperfect Texture Shape and Dimensional Uncertainty on Surface Texture Performance Ieee Access. 5: 27023-27035. DOI: 10.1109/Access.2017.2769880 |
0.357 |
|
2017 |
Mo F, Shen C, Zhou J, Khonsari MM. Statistical Analysis of Surface Texture Performance With Provisions With Uncertainty in Texture Dimensions Ieee Access. 5: 5388-5398. DOI: 10.1109/Access.2017.2694608 |
0.396 |
|
2017 |
Mortazavi V, Khonsari MM. On the degradation of superhydrophobic surfaces: A review Wear. 372: 145-157. DOI: 10.1016/J.Wear.2016.11.009 |
0.331 |
|
2017 |
Rezasoltani A, Khonsari M. Mechanical degradation of lubricating grease in an EHL line contact Tribology International. 109: 541-551. DOI: 10.1016/J.Triboint.2016.12.020 |
0.377 |
|
2017 |
Meng X, Khonsari M. On the effect of viscosity wedge in micro-textured parallel surfaces Tribology International. 107: 116-124. DOI: 10.1016/J.Triboint.2016.11.007 |
0.375 |
|
2017 |
Taee M, Torabi A, Akbarzadeh S, Khonsari MM, Badrossamay M. On the Performance of EHL Contacts with Textured Surfaces Tribology Letters. 65. DOI: 10.1007/S11249-017-0871-3 |
0.457 |
|
2016 |
Dai Q, Khonsari MM, Shen C, Huang W, Wang X. Thermocapillary Migration of Liquid Droplets Induced by a Unidirectional Thermal Gradient. Langmuir : the Acs Journal of Surfaces and Colloids. PMID 27400229 DOI: 10.1021/Acs.Langmuir.6B01614 |
0.374 |
|
2016 |
Kahirdeh A, Khonsari M. Acoustic Entropy of the Materials in the Course of Degradation Entropy. 18: 280. DOI: 10.3390/E18080280 |
0.325 |
|
2016 |
Mortazavi V, Khonsari MM. On the Prediction of Transient Wear Journal of Tribology. 138. DOI: 10.1115/1.4032843 |
0.412 |
|
2016 |
Aghdam AB, Khonsari MM. Application of a Thermodynamically Based Wear Estimation Methodology Journal of Tribology. 138. DOI: 10.1115/1.4032842 |
0.377 |
|
2016 |
Shen C, Khonsari MM. Texture Shape Optimization for Seal-Like Parallel Surfaces: Theory and Experiment Tribology Transactions. 59: 698-706. DOI: 10.1080/10402004.2015.1110220 |
0.35 |
|
2016 |
Li M, Khonsari MM, Lingesten N, Marklund P, McCarthy DMC, Lundin J. Model validation and uncertainty analysis in the wear prediction of a wet clutch Wear. 364: 112-121. DOI: 10.1016/J.Wear.2016.07.007 |
0.358 |
|
2016 |
Rezasoltani A, Khonsari M. An engineering model to estimate consistency reduction of lubricating grease subjected to mechanical degradation under shear Tribology International. 103: 465-474. DOI: 10.1016/J.Triboint.2016.07.012 |
0.364 |
|
2016 |
Shen C, Khonsari MM. The effect of laser machined pockets on the lubrication of piston ring prototypes Tribology International. 101: 273-283. DOI: 10.1016/J.Triboint.2016.04.009 |
0.364 |
|
2016 |
Chun SM, Khonsari MM. Wear simulation for the journal bearings operating under aligned shaft and steady load during start-up and coast-down conditions Tribology International. 97: 440-466. DOI: 10.1016/J.Triboint.2016.01.042 |
0.441 |
|
2016 |
Takabi J, Khonsari M. On the thermally-induced failure of rolling element bearings Tribology International. 94: 661-674. DOI: 10.1016/J.Triboint.2015.10.004 |
0.382 |
|
2016 |
Mortezavi V, Haghshenas A, Khonsari M, Bollen B. Fatigue analysis of metals using damping parameter International Journal of Fatigue. 91: 124-135. DOI: 10.1016/J.Ijfatigue.2016.05.011 |
0.327 |
|
2016 |
Liakat M, Khonsari M. Analysis and life prediction of a composite laminate under cyclic loading Composites Part B: Engineering. 84: 98-108. DOI: 10.1016/J.Compositesb.2015.08.015 |
0.378 |
|
2016 |
Shen C, Khonsari MM. Tribological and Sealing Performance of Laser Pocketed Piston Rings in a Diesel Engine Tribology Letters. 64. DOI: 10.1007/S11249-016-0757-9 |
0.326 |
|
2016 |
Akbarzadeh S, Khonsari MM. On the Applicability of Miner’s Rule to Adhesive Wear Tribology Letters. 63. DOI: 10.1007/S11249-016-0717-4 |
0.376 |
|
2016 |
Shen C, Khonsari MM, Spadafora M, Ludlow C. Tribological Performance of Polyamide-Imide Seal Ring Under Seawater Lubrication Tribology Letters. 62. DOI: 10.1007/S11249-016-0686-7 |
0.412 |
|
2015 |
Masjedi M, Khonsari MM. On the prediction of steady-state wear rate in spur gears Wear. 342: 234-243. DOI: 10.1016/J.Wear.2015.08.010 |
0.376 |
|
2015 |
Li M, Khonsari MM, McCarthy DMC, Lundin J. On the wear prediction of the paper-based friction materialin a wet clutch Wear. 334: 56-66. DOI: 10.1016/J.Wear.2015.04.005 |
0.398 |
|
2015 |
Takabi J, Khonsari M. On the thermally-induced seizure in bearings: A review Tribology International. 91: 118-130. DOI: 10.1016/J.Triboint.2015.05.030 |
0.303 |
|
2015 |
Masjedi M, Khonsari MM. A study on the effect of starvation in mixed elastohydrodynamic lubrication Tribology International. 85: 26-36. DOI: 10.1016/J.Triboint.2014.12.014 |
0.403 |
|
2015 |
Masjedi M, Khonsari MM. On the effect of surface roughness in point-contact EHL: Formulas for film thickness and asperity load Tribology International. 82: 228-244. DOI: 10.1016/J.Triboint.2014.09.010 |
0.412 |
|
2015 |
Kahirdeh A, Khonsari M. Energy dissipation in the course of the fatigue degradation: Mathematical derivation and experimental quantification International Journal of Solids and Structures. 77: 74-85. DOI: 10.1016/J.Ijsolstr.2015.06.032 |
0.308 |
|
2015 |
Liakat M, Khonsari M. Entropic characterization of metal fatigue with stress concentration International Journal of Fatigue. 70: 223-234. DOI: 10.1016/J.Ijfatigue.2014.09.014 |
0.361 |
|
2015 |
Mehdizadeh M, Akbarzadeh S, Shams K, Khonsari MM. Experimental Investigation on the Effect of Operating Conditions on the Running-in Behavior of Lubricated Elliptical Contacts Tribology Letters. 59. DOI: 10.1007/S11249-015-0538-X |
0.456 |
|
2014 |
Takabi J, Khonsari MM. On the Influence of Traction Coefficient on the Cage Angular Velocity in Roller Bearings Tribology Transactions. 57: 793-805. DOI: 10.1080/10402004.2014.913327 |
0.403 |
|
2014 |
Aghdam A, Khonsari M. Prediction of wear in grease-lubricated oscillatory journal bearings via energy-based approach Wear. 318: 188-201. DOI: 10.1016/J.Wear.2014.06.022 |
0.368 |
|
2014 |
Li M, Khonsari M, McCarthy D, Lundin J. Parametric analysis for a paper-based wet clutch with groove consideration Tribology International. 80: 222-233. DOI: 10.1016/J.Triboint.2014.06.023 |
0.406 |
|
2014 |
Masjedi M, Khonsari M. Erratum to “Theoretical and experimental investigation of traction coefficient in line-contact EHL of rough surfaces” [Tribol. Int. 70 (2014) 179–189] Tribology International. 74: 181. DOI: 10.1016/J.Triboint.2014.02.009 |
0.321 |
|
2014 |
Masjedi M, Khonsari MM. Theoretical and experimental investigation of traction coefficient in line-contact EHL of rough surfaces Tribology International. 70: 179-189. DOI: 10.1016/J.Triboint.2013.10.004 |
0.406 |
|
2014 |
Liakat M, Khonsari M. Rapid estimation of fatigue entropy and toughness in metals Materials & Design (1980-2015). 62: 149-157. DOI: 10.1016/J.Matdes.2014.04.086 |
0.363 |
|
2014 |
Liakat M, Khonsari M. An experimental approach to estimate damage and remaining life of metals under uniaxial fatigue loading Materials & Design. 57: 289-297. DOI: 10.1016/J.Matdes.2013.12.027 |
0.362 |
|
2014 |
Kahirdeh A, Khonsari M. Criticality of degradation in composite materials subjected to cyclic loading Composites Part B: Engineering. 61: 375-382. DOI: 10.1016/J.Compositesb.2013.06.048 |
0.304 |
|
2014 |
Rezasoltani A, Khonsari MM. On the Correlation Between Mechanical Degradation of Lubricating Grease and Entropy Tribology Letters. 56: 197-204. DOI: 10.1007/S11249-014-0399-8 |
0.331 |
|
2014 |
Aghdam AB, Beheshti A, Khonsari MM. Prediction of crack nucleation in rough line-contact fretting via continuum damage mechanics approach Tribology Letters. 53: 631-643. DOI: 10.1007/S11249-014-0300-9 |
0.341 |
|
2013 |
Beheshti A, Khonsari MM. An engineering approach for the prediction of wear in mixed lubricated contacts Wear. 308: 121-131. DOI: 10.1016/J.Wear.2013.10.004 |
0.446 |
|
2013 |
Akbarzadeh S, Khonsari M. On the optimization of running-in operating conditions in applications involving EHL line contact Wear. 303: 130-137. DOI: 10.1016/J.Wear.2013.01.098 |
0.369 |
|
2013 |
Fesanghary M, Khonsari M. On the optimum groove shapes for load-carrying capacity enhancement in parallel flat surface bearings: Theory and experiment Tribology International. 67: 254-262. DOI: 10.1016/J.Triboint.2013.08.001 |
0.374 |
|
2013 |
Takabi J, Khonsari M. Experimental testing and thermal analysis of ball bearings Tribology International. 60: 93-103. DOI: 10.1016/J.Triboint.2012.10.009 |
0.413 |
|
2013 |
Williams P, Liakat M, Khonsari M, Kabir O. A thermographic method for remaining fatigue life prediction of welded joints Materials & Design. 51: 916-923. DOI: 10.1016/J.Matdes.2013.04.094 |
0.326 |
|
2013 |
Mesgarnejad A, Bourdin B, Khonsari M. A variational approach to the fracture of brittle thin films subject to out-of-plane loading Journal of the Mechanics and Physics of Solids. 61: 2360-2379. DOI: 10.1016/J.Jmps.2013.05.001 |
0.311 |
|
2013 |
Naderi M, Hoseini S, Khonsari M. Probabilistic simulation of fatigue damage and life scatter of metallic components International Journal of Plasticity. 43: 101-115. DOI: 10.1016/J.Ijplas.2012.11.001 |
0.346 |
|
2013 |
Beheshti A, Aghdam AB, Khonsari MM. Deterministic surface tractions in rough contact under stick-slip condition: Application to fretting fatigue crack initiation International Journal of Fatigue. 56: 75-85. DOI: 10.1016/J.Ijfatigue.2013.08.007 |
0.374 |
|
2013 |
Amiri M, Khonsari MM. Effect of Surface Cooling on Fatigue Life Improvement Journal of Failure Analysis and Prevention. 13: 183-187. DOI: 10.1007/S11668-013-9652-Y |
0.361 |
|
2013 |
Shen C, Khonsari MM. Effect of Dimple’s Internal Structure on Hydrodynamic Lubrication Tribology Letters. 52: 415-430. DOI: 10.1007/S11249-013-0225-8 |
0.363 |
|
2013 |
Shen C, Khonsari MM. On the Magnitude of Cavitation Pressure of Steady-State Lubrication Tribology Letters. 51: 153-160. DOI: 10.1007/S11249-013-0158-2 |
0.348 |
|
2013 |
Aghdam AB, Khonsari MM. Prediction of Wear in Reciprocating Dry Sliding via Dissipated Energy and Temperature Rise Tribology Letters. 50: 365-378. DOI: 10.1007/S11249-013-0133-Y |
0.347 |
|
2013 |
Liakat M, Naderi M, Khonsari MM, Kabir OM. Nondestructive Testing and Prediction of Remaining Fatigue Life of Metals Journal of Nondestructive Evaluation. 33: 309-316. DOI: 10.1007/S10921-013-0214-8 |
0.355 |
|
2012 |
Kahirdeh A, Naderi M, Khonsari M. On the role of cooling on fatigue failure of a woven glass/epoxy laminate Journal of Composite Materials. 47: 1803-1815. DOI: 10.1177/0021998312451608 |
0.351 |
|
2012 |
Qiu Y, Khonsari MM. Thermohydrodynamic Analysis of Spiral Groove Mechanical Face Seal for Liquid Applications Journal of Tribology. 134. DOI: 10.1115/1.4006063 |
0.337 |
|
2012 |
Masjedi M, Khonsari MM. Film thickness and asperity load formulas for line-contact elastohydrodynamic lubrication with provision for surface roughness Journal of Tribology. 134. DOI: 10.1115/1.4005514 |
0.397 |
|
2012 |
Fesanghary M, Khonsari M. Topological and shape optimization of thrust bearings for enhanced load-carrying capacity Tribology International. 53: 12-21. DOI: 10.1016/J.Triboint.2012.03.018 |
0.332 |
|
2012 |
Beheshti A, Khonsari MM. Asperity micro-contact models as applied to the deformation of rough line contact Tribology International. 52: 61-74. DOI: 10.1016/J.Triboint.2012.02.026 |
0.352 |
|
2012 |
Xiao N, Khonsari MM. Thermal performance of mechanical seals with textured side-wall Tribology International. 45: 1-7. DOI: 10.1016/J.Triboint.2011.09.002 |
0.361 |
|
2012 |
Naderi M, Khonsari M. Thermodynamic analysis of fatigue failure in a composite laminate Mechanics of Materials. 46: 113-122. DOI: 10.1016/J.Mechmat.2011.12.003 |
0.347 |
|
2012 |
Naderi M, Kahirdeh A, Khonsari M. Dissipated thermal energy and damage evolution of Glass/Epoxy using infrared thermography and acoustic emission Composites Part B: Engineering. 43: 1613-1620. DOI: 10.1016/J.Compositesb.2011.08.002 |
0.329 |
|
2012 |
Amiri M, Khonsari MM. Nondestructive Estimation of Remaining Fatigue Life: Thermography Technique Journal of Failure Analysis and Prevention. 12: 683-688. DOI: 10.1007/S11668-012-9607-8 |
0.303 |
|
2011 |
Amiri M, Khonsari MM. On the Role of Entropy Generation in Processes Involving Fatigue Entropy. 14: 24-31. DOI: 10.3390/E14010024 |
0.301 |
|
2011 |
Qiu Y, Khonsari MM. Performance Analysis of Full-Film Textured Surfaces With Consideration of Roughness Effects Journal of Tribology. 133. DOI: 10.1115/1.4003303 |
0.41 |
|
2011 |
Jang JY, Khonsari MM, Maki R. Three-dimensional thermohydrodynamic analysis of a wet clutch with consideration of grooved friction surfaces Journal of Tribology. 133. DOI: 10.1115/1.4003019 |
0.391 |
|
2011 |
Fesanghary M, Khonsari MM. On the Shape Optimization of Self-Adaptive Grooves Tribology Transactions. 54: 256-264. DOI: 10.1080/10402004.2010.539772 |
0.325 |
|
2011 |
Aghdam A, Khonsari M. On the correlation between wear and entropy in dry sliding contact Wear. 270: 781-790. DOI: 10.1016/J.Wear.2011.01.034 |
0.352 |
|
2011 |
Beheshti A, Khonsari MM. On the prediction of fatigue crack initiation in rolling/sliding contacts with provision for loading sequence effect Tribology International. 44: 1620-1628. DOI: 10.1016/J.Triboint.2011.05.017 |
0.344 |
|
2011 |
Qiu Y, Khonsari M. Investigation of tribological behaviors of annular rings with spiral groove Tribology International. 44: 1610-1619. DOI: 10.1016/J.Triboint.2011.05.008 |
0.392 |
|
2011 |
Qiu Y, Khonsari M. Experimental investigation of tribological performance of laser textured stainless steel rings Tribology International. 44: 635-644. DOI: 10.1016/J.Triboint.2011.01.003 |
0.369 |
|
2011 |
Akbarzadeh S, Khonsari M. Experimental and theoretical investigation of running-in Tribology International. 44: 92-100. DOI: 10.1016/J.Triboint.2010.09.006 |
0.419 |
|
2010 |
Wen J, Khonsari MM, Hua DY. Three-Dimensional Heat Transfer Analysis of Pin-Bushing System With Oscillatory Motion: Theory and Experiment Journal of Tribology. 133. DOI: 10.1115/1.4002729 |
0.346 |
|
2010 |
Kahirdeh A, Khonsari MM. Condition Monitoring of Molybdenum Disulphide Coated Thrust Ball Bearings Using Time-Frequency Signal Analysis Journal of Tribology. 132. DOI: 10.1115/1.4002379 |
0.325 |
|
2010 |
Jang JY, Khonsari MM. Elastohydrodynamic line-contact of compressible shear thinning fluids with consideration of the surface roughness Journal of Tribology. 132: 1-6. DOI: 10.1115/1.4001787 |
0.371 |
|
2010 |
Akbarzadeh S, Khonsari MM. On the Prediction of Running-In Behavior in Mixed-Lubrication Line Contact Journal of Tribology. 132. DOI: 10.1115/1.4001622 |
0.442 |
|
2010 |
Jang JY, Khonsari MM. On the behavior of misaligned journal bearings based on mass-conservative thermohydrodynamic analysis Journal of Tribology. 132: 1-13. DOI: 10.1115/1.4000280 |
0.359 |
|
2010 |
Fesanghary M, Khonsari MM. On Self-Adaptive Surface Grooves Tribology Transactions. 53: 871-880. DOI: 10.1080/10402004.2010.496071 |
0.371 |
|
2010 |
Mesgarnejad A, Khonsari M. On the tribological behavior of MoS2-coated thrust ball bearings operating under oscillating motion Wear. 269: 547-556. DOI: 10.1016/J.Wear.2010.05.010 |
0.333 |
|
2010 |
Naderi M, Khonsari M. A thermodynamic approach to fatigue damage accumulation under variable loading Materials Science and Engineering: A. 527: 6133-6139. DOI: 10.1016/J.Msea.2010.05.018 |
0.341 |
|
2010 |
Amiri M, Khonsari M. Life prediction of metals undergoing fatigue load based on temperature evolution Materials Science and Engineering: A. 527: 1555-1559. DOI: 10.1016/J.Msea.2009.10.025 |
0.361 |
|
2010 |
Naderi M, Khonsari M. An experimental approach to low-cycle fatigue damage based on thermodynamic entropy International Journal of Solids and Structures. 47: 875-880. DOI: 10.1016/J.Ijsolstr.2009.12.005 |
0.334 |
|
2010 |
Amiri M, Khonsari M. Rapid determination of fatigue failure based on temperature evolution: Fully reversed bending load International Journal of Fatigue. 32: 382-389. DOI: 10.1016/J.Ijfatigue.2009.07.015 |
0.372 |
|
2010 |
Beheshti A, Khonsari MM. A thermodynamic approach for prediction of wear coefficient under unlubricated sliding condition Tribology Letters. 38: 347-354. DOI: 10.1007/S11249-010-9614-4 |
0.388 |
|
2010 |
Amiri M, Khonsari MM, Brahmeshwarkar S. On the Relationship Between Wear and Thermal Response in Sliding Systems Tribology Letters. 38: 147-154. DOI: 10.1007/S11249-010-9584-6 |
0.392 |
|
2009 |
Amiri M, Naderi M, Khonsari M. An Experimental Approach to Evaluate the Critical Damage International Journal of Damage Mechanics. 20: 89-112. DOI: 10.1177/1056789509343082 |
0.32 |
|
2009 |
Sojoudi H, Khonsari MM. On the Behavior of Friction in Lubricated Point Contact With Provision for Surface Roughness Journal of Tribology. 132. DOI: 10.1115/1.4000306 |
0.461 |
|
2009 |
Sojoudi H, Khonsari MM. On the Modeling of Quasi-Steady and Unsteady Dynamic Friction in Sliding Lubricated Line Contact Journal of Tribology. 132. DOI: 10.1115/1.4000272 |
0.408 |
|
2009 |
Qiu Y, Khonsari MM. On the Prediction of Cavitation in Dimples Using a Mass-Conservative Algorithm Journal of Tribology. 131. DOI: 10.1115/1.3176994 |
0.339 |
|
2009 |
Akbarzadeh S, Khonsari MM. Prediction of Steady State Adhesive Wear in Spur Gears Using the EHL Load Sharing Concept Journal of Tribology. 131. DOI: 10.1115/1.3075859 |
0.449 |
|
2009 |
Wen J, Khonsari MM. Thermomechanical Coupling in Oscillatory Systems With Application to Journal Bearing Seizure Journal of Tribology. 131. DOI: 10.1115/1.3071976 |
0.376 |
|
2009 |
Kumar P, Khonsari MM, Bair S. Full EHL Simulations Using the Actual Ree–Eyring Model for Shear-Thinning Lubricants Journal of Tribology-Transactions of the Asme. 131: 11802. DOI: 10.1115/1.3002328 |
0.369 |
|
2009 |
Naderi M, Amiri M, Khonsari MM. On the thermodynamic entropy of fatigue fracture Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 466: 423-438. DOI: 10.1098/Rspa.2009.0348 |
0.353 |
|
2009 |
Wen J, Khonsari MM. On the Temperature Rise of Bodies Subjected to Unidirectional or Oscillating Frictional Heating and Surface Convective Cooling Tribology Transactions. 52: 310-322. DOI: 10.1080/10402000802441629 |
0.332 |
|
2009 |
Kumar P, Khonsari M. On the role of lubricant rheology and piezo-viscous properties in line and point contact EHL Tribology International. 42: 1522-1530. DOI: 10.1016/J.Triboint.2008.11.006 |
0.382 |
|
2009 |
Luan Z, Khonsari M. Heat transfer correlations for laminar flows within a mechanical seal chamber Tribology International. 42: 770-778. DOI: 10.1016/J.Triboint.2008.10.008 |
0.338 |
|
2009 |
Wen J, Khonsari MM. Thermomechanical effects on transient temperature in non-conformal contacts experiencing reciprocating sliding motion International Journal of Heat and Mass Transfer. 52: 4390-4399. DOI: 10.1016/J.Ijheatmasstransfer.2009.03.047 |
0.367 |
|
2009 |
Krupka I, Kumar P, Bair S, Khonsari MM, Hartl M. The Effect of Load (Pressure) for Quantitative EHL Film Thickness Tribology Letters. 37: 613-622. DOI: 10.1007/S11249-009-9559-7 |
0.331 |
|
2009 |
Akbarzadeh S, Khonsari MM. Effect of Surface Pattern on Stribeck Curve Tribology Letters. 37: 477-486. DOI: 10.1007/S11249-009-9543-2 |
0.378 |
|
2008 |
Kumar P, Khonsari MM. Traction in EHL Line Contacts Using Free-Volume Pressure-Viscosity Relationship With Thermal and Shear-Thinning Effects Journal of Tribology. 131. DOI: 10.1115/1.3002331 |
0.389 |
|
2008 |
Kumar P, Khonsari MM. EHL Circular Contact Film Thickness Correction Factor for Shear-Thinning Fluids Journal of Tribology. 130. DOI: 10.1115/1.2959115 |
0.35 |
|
2008 |
Kumar P, Khonsari MM. Combined Effects of Shear Thinning and Viscous Heating on EHL Characteristics of Rolling/Sliding Line Contacts Journal of Tribology. 130. DOI: 10.1115/1.2959111 |
0.397 |
|
2008 |
Kudish II, Kumar P, Khonsari MM, Bair S. Scale Effects in Generalized Newtonian Elastohydrodynamic Films Journal of Tribology-Transactions of the Asme. 130: 41504. DOI: 10.1115/1.2959104 |
0.317 |
|
2008 |
Jang JY, Khonsari MM, Bair S. Correction Factor Formula to Predict the Central and Minimum Film Thickness for Shear-Thinning Fluids in EHL Journal of Tribology. 130. DOI: 10.1115/1.2842249 |
0.319 |
|
2008 |
Elkholy KN, Khonsari MM. Experimental Investigation on the Stick-Slip Phenomenon in Granular Collision Lubrication Journal of Tribology-Transactions of the Asme. 130: 21302. DOI: 10.1115/1.2842244 |
0.404 |
|
2008 |
Akbarzadeh S, Khonsari MM. Performance of Spur Gears Considering Surface Roughness and Shear Thinning Lubricant Journal of Tribology. 130. DOI: 10.1115/1.2805431 |
0.43 |
|
2008 |
Bryant MD, Khonsari MM, Ling FF. On the thermodynamics of degradation Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 464: 2001-2014. DOI: 10.1098/Rspa.2007.0371 |
0.34 |
|
2008 |
Jang JY, Khonsari MM. Linear squeeze film with constant rotational speed Tribology Transactions. 51: 361-371. DOI: 10.1080/10402000701852116 |
0.371 |
|
2008 |
Baek DK, Khonsari MM. Fretting behavior of a rubber coating: Effect of temperature and surface roughness variations Wear. 265: 620-625. DOI: 10.1016/J.Wear.2007.12.002 |
0.341 |
|
2008 |
Wang JK, Khonsari MM. Effects of oil inlet pressure and inlet position of axially grooved infinitely long journal bearings. Part II: Nonlinear instability analysis Tribology International. 41: 132-140. DOI: 10.1016/J.Triboint.2007.05.006 |
0.325 |
|
2008 |
Wang JK, Khonsari MM. Effects of oil inlet pressure and inlet position of axially grooved infinitely long journal bearings. Part I: Analytical solutions and static performance Tribology International. 41: 119-131. DOI: 10.1016/J.Triboint.2007.05.005 |
0.307 |
|
2008 |
Krupka I, Bair S, Kumar P, Khonsari MM, Hartl M. An Experimental Validation of the Recently Discovered Scale Effect in Generalized Newtonian EHL Tribology Letters. 33: 127-135. DOI: 10.1007/S11249-008-9397-Z |
0.323 |
|
2008 |
Kumar P, Khonsari MM. Effect of Starvation on Traction and Film Thickness in Thermo-EHL Line Contacts with Shear-Thinning Lubricants Tribology Letters. 32: 171-177. DOI: 10.1007/S11249-008-9375-5 |
0.359 |
|
2008 |
Akbarzadeh S, Khonsari MM. Thermoelastohydrodynamic Analysis of Spur Gears with Consideration of Surface Roughness Tribology Letters. 32: 129-141. DOI: 10.1007/S11249-008-9370-X |
0.424 |
|
2007 |
Elkholy KN, Khonsari MM. Granular Collision Lubrication: Experimental Investigation and Comparison to Theory Journal of Tribology-Transactions of the Asme. 129: 923-932. DOI: 10.1115/1.2768613 |
0.413 |
|
2007 |
Lu X, Khonsari MM. An Experimental Study of Grease-Lubricated Journal Bearings Undergoing Oscillatory Motion Journal of Tribology-Transactions of the Asme. 129: 640-646. DOI: 10.1115/1.2736705 |
0.344 |
|
2007 |
Wen J, Khonsari MM. Transient Temperature Involving Oscillatory Heat Source With Application in Fretting Contact Journal of Tribology. 129: 517-527. DOI: 10.1115/1.2736435 |
0.315 |
|
2007 |
Lu X, Khonsari MM. An Experimental Investigation of Grease-Lubricated Journal Bearings Journal of Tribology-Transactions of the Asme. 129: 84-90. DOI: 10.1115/1.2401216 |
0.434 |
|
2007 |
Jang JY, Khonsari MM, Bair S. On the elastohydrodynamic analysis of shear-thinning fluids Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 463: 3271-3290. DOI: 10.1098/Rspa.2007.0062 |
0.395 |
|
2007 |
Marklund P, Mäki R, Larsson R, Höglund E, Khonsari M, Jang J. Thermal influence on torque transfer of wet clutches in limited slip differential applications Tribology International. 40: 876-884. DOI: 10.1016/J.Triboint.2006.09.004 |
0.407 |
|
2007 |
Lu X, Khonsari MM. An Experimental Investigation of Dimple Effect on the Stribeck Curve of Journal Bearings Tribology Letters. 27: 169-176. DOI: 10.1007/S11249-007-9217-X |
0.4 |
|
2006 |
Lu X, Khonsari MM, Gelinck ERM. The Stribeck Curve: Experimental Results and Theoretical Prediction Journal of Tribology-Transactions of the Asme. 128: 789-794. DOI: 10.1115/1.2345406 |
0.425 |
|
2006 |
Wang JK, Khonsari MM. Bifurcation analysis of a flexible rotor supported by two fluid-film journal bearings Journal of Tribology. 128: 594-603. DOI: 10.1115/1.2197842 |
0.388 |
|
2006 |
Peng Z, Khonsari MM. A Thermohydrodynamic Analysis of Foil Journal Bearings Journal of Tribology. 128: 534-541. DOI: 10.1115/1.2197526 |
0.416 |
|
2006 |
Wang JK, Khonsari MM. Influence of Inlet Oil Temperature on the Instability Threshold of Rotor-Bearing Systems Journal of Tribology-Transactions of the Asme. 128: 319-326. DOI: 10.1115/1.2162920 |
0.317 |
|
2006 |
Wang JK, Khonsari MM. On the hysteresis phenomenon associated with instability of rotor-bearing systems Journal of Tribology. 128: 188-196. DOI: 10.1115/1.2125927 |
0.354 |
|
2006 |
Jang JY, Khonsari MM. On the role of enduring contact in powder lubrication Journal of Tribology. 128: 168-175. DOI: 10.1115/1.2114933 |
0.406 |
|
2006 |
Tudor A, Khonsari MM. Analysis of Heat Partitioning in Wheel/Rail and Wheel/Brake Shoe Friction Contact: An Analytical Approach Tribology Transactions. 49: 635-642. DOI: 10.1080/10402000600927886 |
0.351 |
|
2006 |
Baek DK, Khonsari MM. Fretting behavior of a rubber coating: Friction characteristics of rubber debris Wear. 261: 1114-1120. DOI: 10.1016/J.Wear.2006.02.005 |
0.338 |
|
2006 |
Wang JK, Khonsari MM. Application of Hopf bifurcation theory to rotor-bearing systems with consideration of turbulent effects Tribology International. 39: 701-714. DOI: 10.1016/J.Triboint.2005.07.031 |
0.347 |
|
2005 |
Mansouri M, Khonsari MM. Surface Temperature in Oscillating Sliding Interfaces Journal of Tribology. 127: 1-9. DOI: 10.1115/1.1828065 |
0.356 |
|
2005 |
Jang JY, Khonsari MM. On the granular lubrication theory Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 461: 3255-3278. DOI: 10.1098/Rspa.2005.1510 |
0.324 |
|
2005 |
Baek DK, Khonsari MM. Friction and wear of a rubber coating in fretting Wear. 258: 898-905. DOI: 10.1016/J.Wear.2004.09.075 |
0.361 |
|
2005 |
Quraishi SM, Khonsari MM, Baek DK. A thermodynamic approach for predicting fretting fatigue life Tribology Letters. 19: 169-175. DOI: 10.1007/S11249-005-6143-7 |
0.372 |
|
2004 |
Peng Z, Khonsari MM. On the Limiting Load-Carrying Capacity of Foil Bearings Journal of Tribology. 126: 817-818. DOI: 10.1115/1.1792697 |
0.32 |
|
2004 |
Peng Z, Khonsari MM. Hydrodynamic Analysis of Compliant Foil Bearings With Compressible Air Flow Journal of Tribology. 126: 542-546. DOI: 10.1115/1.1739242 |
0.408 |
|
2004 |
Iordanoff I, Khonsari MM. Granular Lubrication: Toward an Understanding of the Transition Between Kinetic and Quasi-Fluid Regime Journal of Tribology-Transactions of the Asme. 126: 137-145. DOI: 10.1115/1.1633575 |
0.301 |
|
2004 |
Jang JY, Khonsari MM. On the Growth Rate of Thermoelastic Instability Journal of Tribology. 126: 50-55. DOI: 10.1115/1.1631013 |
0.379 |
|
2004 |
Jang JY, Khonsari MM. Thermoelastic instability of two-conductor friction system including surface roughness Journal of Applied Mechanics, Transactions Asme. 71: 57-68. DOI: 10.1115/1.1629756 |
0.384 |
|
2003 |
Krithivasan R, Khonsari MM. Thermally induced seizure in journal bearings during startup and transient flow disturbance Journal of Tribology. 125: 833-841. DOI: 10.1115/1.1538619 |
0.354 |
|
2003 |
Jang JY, Khonsari MM. A generalized thermoelastic instability analysis Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 459: 309-329. DOI: 10.1098/Rspa.2002.1030 |
0.403 |
|
2002 |
Pappur M, Khonsari MM. Flow Characterization and Performance of a Powder Lubricated Slider Bearing Journal of Tribology. 125: 135-144. DOI: 10.1115/1.1467634 |
0.413 |
|
2002 |
Jang JY, Khonsari MM. On the formation of hot spots in wet clutch systems Journal of Tribology. 124: 336-345. DOI: 10.1115/1.1402132 |
0.363 |
|
2001 |
Cao DM, Feng B, Meng WJ, Rehn LE, Baldo PM, Khonsari MM. Friction and wear characteristics of ceramic nanocomposite coatings: Titanium carbide/amorphous hydrocarbon Applied Physics Letters. 79: 329-331. DOI: 10.1063/1.1384477 |
0.303 |
|
2000 |
Kamiyama S, Khonsari MM. Hydrodynamics of a Soft Contact Lens During Sliding Motion Journal of Tribology-Transactions of the Asme. 122: 573-577. DOI: 10.1115/1.555403 |
0.348 |
|
2000 |
Mansouri M, Holgerson M, Khonsari MM, Aung W. Thermal and Dynamic Characterization of Wet Clutch Engagement With Provision for Drive Torque Journal of Tribology. 123: 313-323. DOI: 10.1115/1.1329856 |
0.352 |
|
2000 |
Keogh PS, Khonsari MM. Influence of Inlet Conditions on the Thermohydrodynamic State of a Fully Circumferentially Grooved Journal Bearing Journal of Tribology. 123: 525-532. DOI: 10.1115/1.1308029 |
0.34 |
|
2000 |
Lovell MR, Deng Z, Khonsari MM. Experimental characterization of sliding friction: Crossing from deformation to plowing contact Journal of Tribology. 122: 856-863. DOI: 10.1115/1.1286217 |
0.614 |
|
1999 |
Zhou L, Khonsari MM. Flow Characteristics of a Powder Lubricant Sheared Between Parallel Plates Journal of Tribology. 122: 147-155. DOI: 10.1115/1.555337 |
0.359 |
|
1999 |
Lovell MR, Khonsari MM. On the Frictional Characteristics of Ball Bearings Coated With Solid Lubricants Journal of Tribology. 121: 761-767. DOI: 10.1115/1.2834133 |
0.604 |
|
1999 |
Jang JY, Khonsari MM. Thermoelastic Instability Including Surface Roughness Effects Journal of Tribology. 121: 648-654. DOI: 10.1115/1.2834118 |
0.389 |
|
1999 |
Jang JY, Khonsari MM. Thermal Characteristics of a Wet Clutch Journal of Tribology. 121: 610-617. DOI: 10.1115/1.2834111 |
0.36 |
|
1998 |
Jang JY, Khonsari MM, Pascovici MD. Thermohydrodynamic Seizure: Experimental and Theoretical Analysis Journal of Tribology. 120: 8-15. DOI: 10.1115/1.2834196 |
0.355 |
|
1998 |
Bair S, Khonsari MM. On the Choking of the Flow of Piezoviscous Liquids Journal of Fluids Engineering. 120: 621-625. DOI: 10.1115/1.2820709 |
0.318 |
|
1998 |
Jang JY, Khonsari MM, Pascovici MD. Modeling Aspects of a Rate-Controlled Seizure in an Unloaded Journal Bearing Tribology Transactions. 41: 481-488. DOI: 10.1080/10402009808983772 |
0.387 |
|
1998 |
Bair S, Khonsari M, Winer W. High-pressure rheology of lubricants and limitations of the Reynolds equation Tribology International. 31: 573-586. DOI: 10.1016/S0301-679X(98)00078-4 |
0.309 |
|
1997 |
Jang JY, Khonsari MM. Performance Analysis of Grease-Lubricated Journal Bearings Including Thermal Effects Journal of Tribology. 119: 859-868. DOI: 10.1115/1.2833897 |
0.37 |
|
1997 |
Lovell MR, Khonsari MM, Marangoni RD. Frictional Analysis of MoS2 Coated Ball Bearings: A Three-Dimensional Finite Element Analysis Journal of Tribology. 119: 754-763. DOI: 10.1115/1.2833881 |
0.583 |
|
1997 |
Lovell MR, Khonsari MM, Marangoni RD. Parameter Identification of Hysteresis Friction for Coated Ball Bearings Based on Three-Dimensional FEM Analysis Journal of Tribology. 119: 462-470. DOI: 10.1115/1.2833520 |
0.589 |
|
1997 |
Keogh PS, Gomiciaga R, Khonsari MM. CFD Based Design Techniques for Thermal Prediction in a Generic Two-Axial Groove Hydrodynamic Journal Bearing Journal of Tribology. 119: 428-435. DOI: 10.1115/1.2833511 |
0.365 |
|
1997 |
Khonsari M. On the modeling of multi-body interaction problems in tribology Wear. 207: 55-62. DOI: 10.1016/S0043-1648(96)07483-2 |
0.33 |
|
1996 |
Hua DY, Khonsari MM. Elastohydrodynamic Lubrication by Powder Slurries Journal of Tribology. 118: 67-73. DOI: 10.1115/1.2837094 |
0.35 |
|
1996 |
Lovell MR, Khonsari MM, Marangoni RD. Comparison of the Low-Speed Frictional Characteristics of Silicon Nitride and Steel Balls Using Conventional Lubricants Journal of Tribology. 118: 43-51. DOI: 10.1115/1.2837091 |
0.608 |
|
1996 |
Fillon M, Khonsari M. Thermohydrodynamic Design Charts for Tilting-Pad Journal Bearings Journal of Tribology-Transactions of the Asme. 118: 232-238. DOI: 10.1115/1.2837084 |
0.337 |
|
1996 |
McKeague KT, Khonsari MM. An Analysis of Powder Lubricated Slider Bearings Journal of Tribology. 118: 206-214. DOI: 10.1115/1.2837080 |
0.382 |
|
1996 |
Lovell MR, Khonsari MM, Marangoni RD. Dynamic Friction Measurements of MoS2 Coated Ball Bearing Surfaces Journal of Tribology. 118: 858-864. DOI: 10.1115/1.2831619 |
0.609 |
|
1996 |
McKeague KT, Khonsari MM. Generalized Boundary Interactions for Powder Lubricated Couette Flows Journal of Tribology. 118: 580-588. DOI: 10.1115/1.2831577 |
0.315 |
|
1996 |
Khonsari MM, Jang JY, Fillon M. On the Generalization of Thermohydrodynamic Analyses for Journal Bearings Journal of Tribology-Transactions of the Asme. 118: 571-579. DOI: 10.1115/1.2831576 |
0.354 |
|
1996 |
Bair S, Khonsari M. An EHD Inlet Zone Analysis Incorporating the Second Newtonian Journal of Tribology-Transactions of the Asme. 118: 341-343. DOI: 10.1115/1.2831306 |
0.327 |
|
1996 |
Harnoy A, Khonsari MM. Hydro-Roll: A Novel Bearing Design with Superior Thermal Characteristics Tribology Transactions. 39: 455-461. DOI: 10.1080/10402009608983552 |
0.382 |
|
1996 |
Lovell M, Khonsari M, Marangoni R. A finite element analysis of the frictional forces between a cylindrical bearing element and MoS2 coated and uncoated surfaces Wear. 194: 60-70. DOI: 10.1016/0043-1648(95)06708-6 |
0.62 |
|
1994 |
Khonsari MM, Hua DY. Thermal Elastohydrodynamic Analysis Using a Generalized Non-Newtonian Formulation With Application to Bair-Winer Constitutive Equation Journal of Tribology. 116: 37-46. DOI: 10.1115/1.2927044 |
0.344 |
|
1994 |
Dai F, Khonsari MM, Lu ZY. On the Lubrication Mechanism of Grain Flows Tribology Transactions. 37: 516-524. DOI: 10.1080/10402009408983324 |
0.351 |
|
1994 |
Lovell MR, Khonsari MM, Marangoni RD. Experimental Measurements of the Rest-Slope and Steady Torque on Ball Bearings Experiencing Small Angular Rotations Tribology Transactions. 37: 261-268. DOI: 10.1080/10402009408983291 |
0.584 |
|
1993 |
Lovell MR, Khonsari MM, Marangoni RD. The Response of Balls Undergoing Oscillatory Motion: Crossing From Boundary to Mixed Lubrication Regimes Journal of Tribology. 115: 261-266. DOI: 10.1115/1.2921000 |
0.581 |
|
1993 |
Hwang CC, Shen HQ, Zhu G, Khonsari MM. On the Main Flow Pattern in Hydrocyclones Journal of Fluids Engineering. 115: 21-25. DOI: 10.1115/1.2910106 |
0.326 |
|
1993 |
Lovell MR, Khonsari MM, Marangoni RD. Low-Speed Friction Torque on Balls Undergoing Rolling Motion Tribology Transactions. 36: 290-296. DOI: 10.1080/10402009308983161 |
0.617 |
|
1993 |
Khonsari M, Hua D. Generalized non-Newtonian elastohydrodynamic lubrication Tribology International. 26: 405-411. DOI: 10.1016/0301-679X(93)90080-K |
0.352 |
|
1992 |
Lovell MR, Khonsari MM, Marangoni RD. Evaluation of Ultra-Low-Speed Jitter in Rolling Balls Journal of Tribology. 114: 589-594. DOI: 10.1115/1.2920921 |
0.609 |
|
1992 |
Hazlett TL, Khonsari MM. Thermoelastic behaviour of journal bearings undergoing seizure Tribology International. 25: 183-187. DOI: 10.1016/0301-679X(92)90047-Q |
0.309 |
|
1992 |
Dai F, Khonsari MM. Analytical solution for a mixture of a newtonian fluid and granules in hydrodynamic bearings Wear. 156: 327-344. DOI: 10.1016/0043-1648(92)90226-X |
0.365 |
|
1991 |
Khonsari MM, Wang SH. On the maximum temperature in double-layered journal bearings Journal of Tribology-Transactions of the Asme. 113: 464-469. DOI: 10.1115/1.2920647 |
0.311 |
|
1991 |
Khonsari MM, Wang SH. On The Fluid-Solid Interaction in Reference to Thermoelastohydrodynamic Analysis of Journal Bearings Journal of Tribology-Transactions of the Asme. 113: 398-404. DOI: 10.1115/1.2920635 |
0.353 |
|
1990 |
Khonsari M, Wang S. On the role of particulate contamination in scuffing failure Wear. 137: 51-62. DOI: 10.1016/0043-1648(90)90017-5 |
0.37 |
|
1989 |
Khonsari MM, Brewe DE. On the Performance of Finite Journal Bearings Lubricated with Micropolar Fluids. Tribology Transactions. 32: 155-160. DOI: 10.1080/10402008908981874 |
0.362 |
|
1988 |
Majumdar BC, Brewe DE, Khonsari MM. Stability of a rigid rotor supported on flexible oil journal bearings Journal of Tribology-Transactions of the Asme. 110: 181-187. DOI: 10.1115/1.3261562 |
0.374 |
|
1988 |
Brewe DE, Khonsari MM. Effect of Shaft Frequency on Cavitation in a Journal Bearing for Noncentered Circular Whirl Tribology Transactions. 31: 54-60. DOI: 10.1080/10402008808981797 |
0.323 |
|
1987 |
Khonsari MM. A Review of Thermal Effects in Hydrodynamic Bearings. Part II: Journal Bearings Tribology Transactions. 30: 26-33. DOI: 10.1080/05698198708981726 |
0.317 |
|
1987 |
Khonsari MM. A Review of Thermal Effects in Hydrodynamic Bearings Part I: Slider and Thrust Bearings Tribology Transactions. 30: 19-25. DOI: 10.1080/05698198708981725 |
0.311 |
|
1986 |
Khonsari MM, Beaman JJ. Thermohydrodynamic Analysis of Laminar Incompressible Journal Bearings Tribology Transactions. 29: 141-150. DOI: 10.1080/05698198608981671 |
0.391 |
|
Show low-probability matches. |